Sanitary requirements. The premises of the IWT cabinet should have natural and artificial lighting in accordance with San. Pi. N. The main stream of natural light should be on the left. The orientation of window openings should be north or northeast. It is not allowed to direct the main luminous flux of natural light behind and in front of the PC operating. With double-sided lighting at a depth of more than 6 m in the cabinet, a right-sided lighting device is required, the height of which must be at least 2.2 m from the floor.

In the lighting installations of the IWT cabinet, a general lighting system should be used, made by ceiling or suspended fluorescent lamps, evenly spaced along the ceiling in rows in the form of solid lines on both sides of the desktop with a PC or VDT. Lamps, as well as window light apertures, should not be reflected on the screens of a PC or VDT. The illumination of the surface of student tables under artificial lighting should be in the range of 300-500 lux. Luminaires must have light-scattering fittings.

As light sources, it is recommended to use fluorescent lamps with a power of 40 W, 58 W or energy-saving power of 36 W of the LB, LHB type as the most efficient and acceptable in terms of spectral composition. In rooms with a PC, due to air pollution by anthropogenic organic substances and carbon dioxide, it is recommended to have supply and exhaust ventilation that provides optimal temperature and humidity conditions for all climatic zones.

Optimal parameters Temperature, C Permissible parameters Relative temperature, C humidity, % Relative Humidity, % 19 62 18 39 20 58 22 31 21 55 - -

With absence supply and exhaust ventilation you can organize air conditioning with the help of household air conditioners. The calculation of air conditioners must be carried out by a ventilation engineer depending on their performance, the amount of heat surplus from machines, people, solar radiation and sources artificial lighting.

The IWT cabinet should be equipped with a washbasin with hot and cold water. The power supply of the cabinet must be carried out in accordance with the requirements of GOST 28139 -89 and PUE. The supply of electrical voltage to the tables of students and teachers must be stationary and hidden. Location of electrical panel and Devices protective shutdown should give the teacher the ability to instantly turn off the power supply system. Recommended placement is to the left or right of the chalkboard.

To provide fire safety MBT office should be equipped with 2 carbon dioxide fire extinguishers (type OU-2). For painting walls and panels, light colors of paints should be used (p = 0.5 -0.6). The composition of the paints must exclude the occurrence of lime dust. The surfaces of the enclosing structures of the cabinet, blackboard, desktops should be matte. The surface of the floor must be smooth, without potholes, non-slip, easy to clean and wet cleaning, and have antistatic properties.

The content of harmful chemicals in indoor air using video display terminals (VDTs) and personal electronic computers (PCs) should not exceed the average daily concentrations for atmospheric air. For interior decoration the interior of premises with a PC and VDT is not allowed to use synthetic materials that release harmful substances into the air chemical substances and connections. These include chipboard, laminated paper plastic, washable wallpaper, rolled synthetic coatings, etc. The noise level at the workplace in all classrooms with VDT and PC should not exceed 50 days BA. ( Sanitary standards permissible noise in the premises of residential and public buildings and on the territory of residential development N 3077 -84, paragraph 7. 2).

Office requirements. The office of informatics and computer technology is organized as an educational unit of a secondary general education and vocational school, a training and production plant, equipped with a set of educational computer equipment, educational and visual aids, educational equipment, furniture, office equipment and devices for conducting theoretical and practical, classroom, extracurricular classes in the course "Fundamentals of Informatics and Computer Engineering", both basic and specialized. . The area of ​​the premises of the IWT office is determined in accordance with the requirements normative document"Educational and material base of an educational institution of general secondary education" part I. "Norms and requirements for educational buildings and school plots. Placement of KIVT in all educational institutions in the basement and basements not allowed.

The minimum area per one PC must be at least 6 square meters. m., and the volume - not less than 24.0 cubic meters. m. with a height of at least 4 m. With a lower height of the training room, it is recommended to increase the area by one workplace. At the office of IWT, a laboratory area of ​​at least 18 square meters should be organized. m. The laboratory room should have two exits: to the training room and to the landing or to recreation. The area of ​​​​the office should allow you to arrange furniture in it in compliance with sanitary and hygienic standards. The front wall of the KIVT is equipped with a blackboard for felt-tip pens, a screen, a cabinet for storing teaching aids and information media.

At the entrance to the IWT office, built-in or wall-mounted cabinets (shelves) for briefcases should be provided. To the left of the blackboard, in the teacher's working area, an electrical switchboard with a control panel for power supply to the workplaces of the teacher and students should be fixed on the wall. Drawers for tables are installed under the board or separately under the stands. Holders (or a bar with holders) are attached to the upper edge of the board for hanging tables.

On the wall opposite the windows, exposition boards with permanent and temporary information are placed. Along the back wall, it is possible to install a sectional cabinet for storing educational equipment and information media, depending on the area of ​​​​the office. The upper part of the back wall of the classroom should be designed to display the manuals necessary for studying individual topics of the program.

Requirements for a set of furniture in the classroom. The office and the laboratory room must be equipped with a certain set of specialized furniture that meets the requirements of GOST 22046-89, which has a certificate of conformity with technical documentation and a hygiene certificate. The office must have furniture for: - organization of the teacher's workplace; - organization of workplaces for students; - for rational placement and storage of teaching aids; - to organize the use of equipment.

The laboratory room should have the following furniture: radio editing table, office desk; shelving for storage of tools and a safe. Furniture for organizing a teacher's workplace should include a table with a place for equipment (graphic projector) and a computer, a cabinet for a printer, a chair, and a blackboard. Furniture for the organization of workplaces for students includes single student desks for a computer (GOST 11015-93) with chairs of different height groups No. 4, 5, 6) with color marking with lifting and swivel chairs. Furniture for the rational placement and storage of educational equipment should consist of a combined cabinet.

Requirements for the organization, jobs of teachers and students. The teacher's workplace is located on the podium and is equipped with a table equipped with equipment in accordance with the Lists, two cabinets (for a printer and a graph projector), a blackboard, a screen and an electrical switchboard with a control panel. The teacher's table must be supplied with power to connect a PC, printer, graph projector. Dimensions of the teacher's table: cover length - not less than 1300 mm, width - not less than 700 mm.

The pedestals should have 1-2 drawers with dimensions of 350 x 500 x 100 mm for accessories, magnetic media and banners based on the current day of classes. For the MBT office, it is recommended to use a blackboard designed for writing with a felt-tip pen. Students' workplaces equipped with personal computers (PCs) should consist of a single table and a lifting and swivel chair.

Additionally, the computer science room is equipped with double student tables (GOST 11015-93) in accordance with the number of jobs for students when working on a PC or VDT. Student tables are located in the center and are designed for theoretical classes. Tables and chairs should be of different height groups with color indication.

Furniture group Chair seat front edge height, mm Height group, mm Marking color Table height, mm 4 380 1460 to 1600 Red 640 5 420 1600 to 1750 Green 700 6 460 1750 to 1800 Blue 760

The modular dimensions of the working surface of the table for VDT and PC, on the basis of which the design dimensions should be calculated, should be considered: width - 800, 1000, 1200, 1400 mm, depth - 800 and 1000 mm with its unregulated height equal to 725 mm. The student's desk must be connected to the power supply and the LAN cable. The table must be anchored to the floor. The arrangement of workplaces for students in KIVT should provide free access for students and teachers during the lesson to the workplace.

At the perimeter arrangement of workplaces, the following distances must be observed: a) along the width of the office: - the distance between the wall with window openings and tables must be at least 0.8 m; - the distance between the wall opposite window openings, and tables with a PC should be about 0.1 m, and in some cases, depending on the video monitors used, tables can be installed directly against the wall; b) along the length of the KIVT tables with a PC can be placed without a gap and with a distance between them.

When tables with PCs are arranged in rows, each table must have a protective screen on the back of the video monitor. The screen is attached to the table at a distance of 3-5 cm, its area should be sufficient to protect the power wires. The number of jobs for students can be 9, 12, 15, depending on the class size.

Requirements for equipping the office with equipment and devices. The number of student PCs required to equip the ICT room should be at the rate of one computer per student, taking into account the division of the class into two groups. The IWT cabinet should include one machine for the teacher with appropriate peripheral equipment. The IWT cabinet must be equipped with a graphic projector, a video recorder, a TV set (diagonal not less than 61 cm), a slide projector and a screen.

The demonstration TV is mounted 1.5 m from the floor on a bracket to the left of the blackboard. The graphic projector should be located on a pedestal next to the teacher's desk. When demonstrating filmstrips and transparencies (with a screen width of 1.2 -1.4 m), the distance from the screen to the first tables of students (for theoretical classes) should be at least 2.7 m, and to the last tables no more than 8.6 m. The height of the lower edge of the screen above the podium is at least 0.8 m. The optimal viewing area for television programs and videos is located at a distance of at least 2.7 m from the TV screen to the first double tables of students (during theoretical classes).

Requirements for the placement and storage of equipment. Educational equipment and aids should be placed and stored in a sectional cabinet located in the laboratory and having adjustable shelves and half-shelves, according to the sections of the program. Demonstration aids and DIY equipment should be kept separate. Discs with software should be stored in special small boxes, protected from dust and light, according to classes and sections of the program; the drawers are placed in the cabinet, and the places for storing disks in it are marked with inscriptions.

Tables should be stored in boxes under the blackboard or in special compartments according to sections of the program and classes, taking into account the dimensions. Audiovisual aids should be stored on cabinet shelves, filmstrips and transparencies - in stacks with recesses for boxes. Cells and boxes must be labeled. Reference, educational and methodical and popular scientific literature should be stored on the shelves of the cabinet.

requirements for the interior design of the office of informatics and computer technology. The manuals necessary for the study of individual topics, sections of the course, should be exhibited on the wall of the office, opposite the blackboard. . For the exposition of books and materials, the cabinet should be equipped with removable stands. On the wall opposite the windows, boards are placed with reference tables permanently located in the classroom, acquainting students with safety regulations, the main computer components and their functions.

On one of the walls, along with the stands, a table "Rules for the work of students on a PC and VDT" should be placed. Different fonts can be used in the design of stands: printed and handwritten, Arabic and Gothic. Headings and subheadings should be in the same style.

Registration N 19993

In accordance with the Federal Law of March 30, 1999 N 52-FZ "On the sanitary and epidemiological welfare of the population" (Collection of Legislation Russian Federation, 1999, N 14, Art. 1650; 2002, N 1 (part 1), Art. 2; 2003, N 2, Art. 167; 2003, N 27 (part 1), Art. 2700; 2004, N 35, Art. 3607; 2005, N 19, Art. 1752; 2006, N 1, art. ten; 2006, N 52 (part 1), Art. 5498; 2007, N 1 (part 1), art. 21; 2007, N 1 (part 1), art. 29; 2007, N 27, Art. 3213; 2007, N 46, art. 5554; 2007, N 49, Art. 6070; 2008, N 24, art. 2801; 2008, N 29 (part 1), Art. 3418; 2008, N 30 (part 2), Art. 3616; 2008, N 44, art. 4984; 2008, N 52 (part 1), Art. 6223; 2009, N 1, art. 17; 2010, N 40, Art. 4969) and Decree of the Government of the Russian Federation dated July 24, 2000 N 554 "On Approval of the Regulations on the State Sanitary and Epidemiological Service of the Russian Federation and the Regulations on State Sanitary and Epidemiological Rationing" (Collected Legislation of the Russian Federation, 2000, N 31, Art. 3295; 2004 , N 8, item 663; 2004, N 47, item 4666; 2005, N 39, item 3953) I decide:

1. Approve the sanitary and epidemiological rules and regulations SanPiN 2.4.2.2821-10 "Sanitary and epidemiological requirements for the conditions and organization of education in educational institutions" (Appendix).

2. Enact these sanitary and epidemiological rules and regulations from September 1, 2011.

3. Since the introduction of SanPiN 2.4.2.2821-10, consider the sanitary and epidemiological rules and regulations SanPiN 2.4.2.1178-02 "Hygienic requirements for the conditions of education in general education institutions" approved by the decision of the Chief State Sanitary Doctor of the Russian Federation, First Deputy Minister of Health of the Russian Federation dated November 28, 2002 N 44 (registered in the Ministry of Justice of Russia on December 5, 2002, registration number 3997), SanPiN 2.4.2.2434-08 "Change N 1 to SanPiN 2.4.2.1178-02", approved by the decision of the Chief State Sanitary Doctor of the Russian Federation dated December 26, 2008 N 72 (registered with the Ministry of Justice of Russia on January 28, 2009, registration number 13189).

G. Onishchenko

Application

Sanitary and epidemiological requirements for the conditions and organization of education in educational institutions

Sanitary and epidemiological rules and regulations SanPiN 2.4.2.2821-10

I. General provisions and scope

1.1. These sanitary and epidemiological rules and regulations (hereinafter referred to as the sanitary rules) are aimed at protecting the health of students in the implementation of activities for their education and upbringing in educational institutions.

1.2. These sanitary rules establish sanitary and epidemiological requirements for:

Placement of a general educational institution;

Territories of a general educational institution;

The building of a general educational institution;

Equipping the premises of a general educational institution;

Air-thermal regime of a general educational institution;

natural and artificial lighting;

Water supply and sewerage;

Premises and equipment of educational institutions located in adapted buildings;

The mode of the educational process;

Organizations of medical care for students;

Sanitary condition and maintenance of the educational institution;

Compliance with sanitary rules.

1.3. Sanitary rules apply to designed, operating, under construction and reconstructed educational institutions, regardless of their type, organizational and legal forms and forms of ownership.

These sanitary rules apply to all educational institutions that implement programs of primary general, basic general and secondary (complete) general education and carry out the educational process in accordance with the levels of general education programs of three levels of general education:

the first stage is primary general education (hereinafter referred to as the I stage of education);

the second stage is the basic general education (hereinafter referred to as the II stage of education);

the third step is secondary (complete) general education (hereinafter referred to as the third step of education).

1.4. These sanitary rules are binding on all citizens, legal entities and individual entrepreneurs whose activities are related to the design, construction, reconstruction, operation of educational institutions, education and training of students.

1.5. Educational activities is subject to licensing in accordance with the legislation of the Russian Federation. The condition for making a decision on issuing a license is the submission by the license applicant of a sanitary and epidemiological conclusion on the compliance with the sanitary rules of buildings, territories, premises, equipment and other property, the mode of the educational process, which the license applicant intends to use for educational activities*.

1.6. If there are preschool groups in the institution that implement the main general educational program of preschool education, their activities are regulated by sanitary and epidemiological requirements for the arrangement, content and organization of the working hours of preschool organizations.

1.7. The use of premises of educational institutions for other purposes is not allowed.

1.8. Control over the implementation of these sanitary rules is carried out in accordance with the legislation of the Russian Federation by the authorized federal executive body exercising the functions of control and supervision in the field of ensuring the sanitary and epidemiological welfare of the population, protecting the rights of consumers and the consumer market and its territorial bodies.

II. Requirements for the placement of educational institutions

2.1. Providing land plots for the construction of objects of educational institutions is allowed if there is a sanitary-epidemiological conclusion on the compliance of the land plot with sanitary rules.

2.2. Buildings of educational institutions should be located in a residential area, outside the sanitary protection zones of enterprises, structures and other facilities, sanitary breaks, garages, parking lots, highways, railway transport facilities, subways, takeoff and landing routes for air transport.

To ensure regulatory levels of insolation and natural light premises and playgrounds when placing buildings of educational institutions, sanitary gaps from residential and public buildings must be observed.

The main engineering communications of urban (rural) purposes - water supply, sewerage, heat supply, energy supply - should not pass through the territory of educational institutions.

2.3. Newly constructed buildings of educational institutions are located on the intra-quarter territories of residential microdistricts, remote from city streets, inter-quarter passages at a distance that provides noise levels and air pollution to the requirements of sanitary rules and regulations.

2.4. When designing and building urban educational institutions, it is recommended to provide for pedestrian accessibility of institutions located:

In II and III building-climatic zones - no more than 0.5 km;

In the I climatic region (I subzone) for students of the I and II stages of education - no more than 0.3 km, for students of the III stage of education - no more than 0.4 km;

In the I climatic region (II subzone) for students of the I and II stages of education - no more than 0.4 km, for students of the III stage of education - no more than 0.5 km.

2.5. In rural areas, pedestrian accessibility for students of educational institutions:

In the II and III climatic zones for students of the I stage of education is no more than 2.0 km;

For students of the II and III stages of education - no more than 4.0 km, in the I climatic zone - 1.5 and 3 km, respectively.

At distances exceeding those indicated for students of educational institutions located in rural areas, it is necessary to organize transport services to the educational institution and back. Travel time should not exceed 30 minutes one way.

The transportation of students is carried out by a specially allocated transport intended for the transportation of children.

The optimal pedestrian approach of students to the gathering place at the stop should be no more than 500 m. For rural areas, it is allowed to increase the radius of walking distance to the stop up to 1 km.

2.6. It is recommended for students living at a distance exceeding the maximum allowable transport service, as well as in case of transport inaccessibility during adverse weather conditions, to provide boarding at a general education institution.

III. Requirements for the territory of educational institutions

3.1. The territory of the educational institution should be fenced and landscaped. Landscaping of the territory is provided at the rate of at least 50% of the area of ​​its territory. When placing the territory of a general educational institution on the border with forests and gardens, it is allowed to reduce the landscaping area by 10%.

Trees are planted at a distance of at least 15.0 m, and shrubs at least 5.0 m from the building of the institution. When landscaping the territory, trees and shrubs with poisonous fruits are not used in order to prevent the occurrence of poisoning among students.

It is allowed to reduce the landscaping with trees and shrubs of the territories of educational institutions in the regions of the Far North, taking into account the special climatic conditions in these regions.

3.2. On the territory of a general educational institution, the following zones are distinguished: a recreation area, a sports and economic area. It is allowed to allocate a training and experimental zone.

When organizing a training and experimental zone, it is not allowed to reduce the physical culture and sports zone and the recreation area.

3.3. It is recommended to place the physical culture and sports zone on the side of the gym. When placing a physical culture and sports area from the windows of classrooms, noise levels in classrooms should not exceed hygienic standards for residential, public buildings and residential areas.

When constructing treadmills and sports grounds (volleyball, basketball, handball), drainage must be provided to prevent flooding with rainwater.

The equipment of the physical culture and sports zone should ensure the implementation of the programs of the subject "Physical Education", as well as the holding of sectional sports activities and recreational activities.

Sports and playgrounds must have a hard surface, a football field - a grass cover. Synthetic and polymer coatings must be frost-resistant, equipped with drains and must be made of materials that are harmless to children's health.

Classes on damp areas with bumps and potholes are not carried out.

Physical culture and sports equipment should correspond to the height and age of students.

3.4. For the implementation of the programs of the subject "Physical culture" it is allowed to use sports facilities (grounds, stadiums) located near the institution and equipped in accordance with sanitary and epidemiological requirements for the arrangement and maintenance of places for physical culture and sports.

3.5. When designing and building educational institutions on the territory, it is necessary to provide a recreation area for organizing outdoor games and recreation for students attending after-school groups, as well as for the implementation of educational programs that provide for events on fresh air.

3.6. The economic zone is located on the side of the entrance to industrial premises dining room and has an independent entrance from the street. In the absence of heating and centralized water supply, a boiler room and a pump room with a water tank are placed on the territory of the economic zone.

3.7. To collect waste on the territory of the economic zone, a platform is equipped on which garbage collectors (containers) are installed. The site is located at a distance of at least 25.0 m from the entrance to the catering unit and the windows of classrooms and classrooms and is equipped with a waterproof hard surface, the dimensions of which exceed the base area of ​​the containers by 1.0 m in all directions. Garbage bins must have tight-fitting lids.

3.8. Entrances and entrances to the territory, driveways, paths to outbuildings, to areas for garbage collectors are covered with asphalt, concrete and other hard surface.

3.9. The territory of the institution must have outdoor artificial lighting. The level of artificial illumination on the ground must be at least 10 lux.

3.10. The location on the territory of buildings and structures that are not functionally related to a general educational institution is not allowed.

3.11. If there are preschool groups in a general educational institution that implement the main general educational program of preschool education, a play area is allocated on the territory, equipped in accordance with the requirements for the device, content and organization of the working hours of preschool organizations.

3.12. Noise levels on the territory of a general education institution should not exceed the hygienic standards for premises of residential, public buildings and residential areas.

IV. building requirements

4.1. Architectural and planning solutions of the building should provide:

Allocation to a separate block of classrooms primary school with exits to the site;

Location of recreational facilities in close proximity to educational facilities;

Accommodation on upper floors(above the third floor) classrooms and classrooms attended by students in grades 8-11, administrative and utility rooms;

Exclusion of the harmful effects of environmental factors in a general education institution on the life and health of students;

Placement of training workshops, assembly and sports halls of educational institutions, their total area, as well as a set of premises for circle work, depending on local conditions and the capabilities of the educational institution, in compliance with the requirements building codes and rules and these sanitary rules.

Previously constructed buildings of educational institutions are operated in accordance with the project.

4.2. It is not allowed to use the basement floors and basements for classrooms, offices, laboratories, educational workshops, medical facilities, sports, dance and assembly halls.

4.3. The capacity of newly built or reconstructed educational institutions should be calculated for training in only one shift.

4.4. Entrances to the building can be equipped with vestibules or air and air-thermal curtains, depending on the climatic zone and the calculated outdoor temperature, in accordance with the requirements of building codes and regulations.

4.5. When designing, constructing and reconstructing a building of a general educational institution, wardrobes must be placed on the 1st floor with the obligatory equipment of places for each class. Wardrobes are equipped with hangers for clothes and cells for shoes.

In existing buildings for primary school students, it is possible to place a wardrobe in recreation areas, provided that they are equipped with individual lockers.

In institutions located in rural areas, with the number of students in one class of no more than 10 people, it is allowed to arrange wardrobes (hangers or lockers) in classrooms, subject to the norm of the area of ​​the classroom for 1 student.

4.6. Students of elementary general education schools must study in the classrooms assigned to each class.

4.7. In newly constructed buildings of educational institutions, it is recommended to allocate classrooms for primary classes in a separate block (building), group them into educational sections.

In the training sections (blocks) for students in grades 1-4, there are: classrooms with recreation, playrooms for extended day groups (at least 2.5 m 2 per student), toilets.

For 1st grade students attending extended day groups, sleeping quarters with an area of ​​at least 4.0 m 2 per child should be provided.

4.8. For students of the II - III stage of education, the organization of the educational process according to the class-room system is allowed.

If it is impossible to ensure that classrooms and laboratories match the educational furniture to the height and age characteristics of students, it is not recommended to use the classroom system of education.

In general educational institutions located in rural areas, with a small number of classes, it is allowed to use classrooms in two or more disciplines.

4.9. The area of ​​classrooms is taken without taking into account the area required for arranging additional furniture (wardrobes, cabinets, etc.) for storage teaching aids and equipment used in the educational process, based on:

Not less than 2.5 m 2 per 1 student with frontal forms of classes;

Not less than 3.5 m 2 per 1 student when organizing group forms of work and individual lessons.

In newly constructed and reconstructed buildings of educational institutions, the height of educational premises must be at least 3.6 m 2.

The estimated number of students in classes is determined based on the calculation of the area per student and the arrangement of furniture in accordance with Section V of these sanitary rules.

4.10. In the classrooms of chemistry, physics, biology, laboratory assistants should be equipped.

4.11. The area of ​​computer science classrooms and other classrooms where personal computers are used must correspond to hygiene requirements to personal electronic computers and organization of work.

4.12. The set and area of ​​premises for extracurricular activities, circle classes and sections must comply with sanitary and epidemiological requirements for institutions additional education children.

When placing a sports hall on the 2nd floor and above, sound and vibration isolation measures must be taken.

The number and types of sports halls are provided depending on the type of educational institution and its capacity.

4.14. At sports halls in existing educational institutions, equipment must be provided; dressing rooms for boys and girls. It is recommended to equip gyms with separate showers and toilets for boys and girls.

4.15. In the newly constructed buildings of educational institutions at sports halls, the following should be provided: projectile; rooms for storing cleaning equipment and preparing disinfectant and washing solutions with an area of ​​at least 4.0 m 2; separate dressing rooms for boys and girls with an area of ​​at least 14.0 m 2 each; separate showers for boys and girls with an area of ​​at least 12 m 2 each; separate toilets for boys and girls with an area of ​​at least 8.0 m 2 each. Toilets or locker rooms are equipped with sinks for washing hands.

4.16. When constructing swimming pools in educational institutions, planning decisions and its operation must meet hygienic requirements for the device, operation of swimming pools and water quality.

4.17. In general educational institutions, it is necessary to provide a set of rooms for organizing meals for students in accordance with the sanitary and epidemiological requirements for organizing meals for students in general educational institutions, institutions of primary and secondary vocational education.

4.18. During the construction and reconstruction of buildings of educational institutions, it is recommended to provide an assembly hall, the dimensions of which are determined by the number of seats at the rate of 0.65 m 2 per seat.

4.19. The type of library depends on the type of educational institution and its capacity. In institutions with in-depth study of individual subjects, gymnasiums and lyceums, the library should be used as a reference and information center of a general education institution.

The area of ​​the library (information center) must be taken at the rate of at least 0.6 m 2 per student.

When equipping information centers with computer technology, hygienic requirements for personal electronic computers and organization of work must be observed.

4.20. Recreational facilities of educational institutions should be provided at the rate of at least 0.6 m 2 per 1 student.

The width of recreations with a one-sided arrangement of classes should be at least 4.0 m, with a two-sided arrangement of classes - at least 6.0 m.

When designing a recreation area in the form of halls, the area is set at the rate of 2 m 2 per student.

4.21. In existing buildings of educational institutions for medical care of students, medical facilities should be provided on the first floor of the building, located in a single block: a doctor's office with an area of ​​at least 14.0 m 2 and a length of at least 7.0 m (to determine the acuity of hearing and vision of students ) and a procedural (vaccination) room with an area of ​​at least 14.0 m 2.

In general educational institutions located in rural areas, it is allowed to organize medical care at feldsher-obstetric stations and outpatient clinics.

4.22. For newly constructed and reconstructed buildings of educational institutions, the following premises for medical care should be equipped: a doctor's office with a length of at least 7.0 m (to determine the acuity of hearing and vision of students) with an area of ​​at least 21.0 m 2; treatment and vaccination rooms with an area of ​​at least 14.0 m 2 each; a room for the preparation of disinfectant solutions and storage of cleaning equipment intended for medical premises, with an area of ​​at least 4.0 m 2; toilet.

When equipping a dental office, its area must be at least 12.0 m 2.

All medical facilities should be grouped in one block and located on the 1st floor of the building.

4.23. Doctor's office, procedural, vaccination and dental offices equip in accordance with sanitary and epidemiological requirements for organizations engaged in medical activities. The vaccination room is equipped in accordance with the requirements for the organization of immunoprophylaxis of infectious diseases.

4.24. For children in need of psychological and pedagogical assistance, separate rooms of a teacher-psychologist and a teacher-speech therapist with an area of ​​at least 10 m 2 each are provided in general educational institutions.

4.25. On each floor there should be toilets for boys and girls, equipped with cubicles with doors. The number of sanitary appliances is determined on the basis of: 1 toilet bowl for 20 girls, 1 wash basin for 30 girls: 1 toilet bowl, 1 urinal and 1 wash basin for 30 boys. The area of ​​sanitary facilities for boys and girls should be taken at the rate of at least 0.1 m 2 per student.

A separate bathroom is allocated for staff at the rate of 1 toilet for 20 people.

In previously built buildings of educational institutions, the number of sanitary facilities and sanitary appliances is allowed in accordance with the design decision.

In sanitary facilities, pedal buckets and toilet paper holders are installed; an electric towel or a paper towel holder is placed next to the washbasins. Sanitary equipment must be in good working order, free of chips, cracks and other defects. Entrances to the bathrooms are not allowed to be located opposite the entrance to the classrooms.

Toilets are equipped with seats made of materials that allow them to be treated with detergents and disinfectants.

For students of II and III levels of education in newly built and reconstructed buildings of educational institutions, personal hygiene rooms are provided at the rate of 1 cabin for 70 people with an area of ​​at least 3.0 m 2. They are equipped with a bidet or a tray with a flexible hose, a toilet bowl and a washbasin with cold and hot water supply.

For previously constructed buildings of educational institutions, it is recommended to equip personal hygiene cabins in toilet rooms.

4.26. In the newly constructed buildings of educational institutions, on each floor, a room is provided for storing and processing cleaning equipment, preparing disinfectant solutions, equipped with a tray and cold and hot water supply to it. In previously built buildings of educational institutions, separate place for storage of all cleaning equipment (except for equipment intended for cleaning catering and medical facilities), which is equipped with a cabinet.

4.27. In the premises of primary classes, laboratory, classrooms (chemistry, physics, drawing, biology), workshops, home economics, in all medical facilities, washbasins are installed.

The installation of sinks in classrooms should be provided for, taking into account the growth and age characteristics of students: at a height of 0.5 m from the floor to the side of the sink for students in grades 1-4 and at a height of 0.7-0.8 m from the floor to the side of the sink for students in grades 5 - 11. Pedal buckets and toilet paper holders are installed near the sinks. Electric or paper towels and soap are placed next to the washbasins. Soap, toilet paper and towels should be available at all times.

4.28. The ceilings and walls of all rooms must be smooth, without cracks, cracks, deformations, signs of fungus damage and allowing them to be cleaned with a wet method using disinfectants. Allowed in classrooms, classrooms, recreation and other premises equipment suspended ceilings from materials permitted for use in general educational institutions, provided that the height of the premises is not less than 2.75 m, and in newly built buildings not less than 3.6 m.

4.29. Floors in classrooms and classrooms and recreation areas must have plank, parquet, tile or linoleum flooring. In the case of using a tile coating, the surface of the tile must be matte and rough, not allowing slipping. The floors of toilets and washrooms are recommended to be lined with ceramic tiles.

Floors in all rooms must be free of cracks, defects and mechanical damage.

4.30. In medical premises, the surfaces of the ceiling, walls and floor must be smooth, allowing them to be cleaned with a wet method and resistant to the action of detergents and disinfectants approved for use in medical premises.

4.31. All construction and Decoration Materials must be harmless to the health of children.

4.32. In a general education institution and a school boarding school, all types of repair work in the presence of students.

4.33. A boarding school at a general educational institution may be included as a structural unit in a general educational institution, if the general educational institution is located in excess of the maximum allowable transport service.

The building of a boarding school at a general educational institution may be separate, and also be part of the main building of a general educational institution with its allocation to an independent block with a separate entrance.

As part of the premises of a boarding school at a general education institution, the following should be provided:

Sleeping quarters separately for boys and girls with an area of ​​at least 4.0 m 2 per person;

Premises for self-training with an area of ​​at least 2.5 m 2 per person;

Rest rooms and psychological relief;

Washrooms (1 sink for 10 people), toilets (1 toilet for 10 girls, 1 toilet and 1 urinal for 20 boys, each toilet has 1 sink for washing hands), showers (1 shower net for 20 people), hygiene room. Pedal buckets, toilet paper holders are installed in toilets; electric or paper towels and soap are placed next to washbasins. Soap, toilet paper and towels should be available at all times;

Rooms for drying clothes and shoes;

Rooms for washing and ironing personal belongings;

Storage room for personal belongings;

Medical room: doctor's office and

Insulator;

Administrative and economic premises.

The equipment, decoration of the premises and their maintenance must comply with the hygienic requirements for the device, maintenance, organization of the working hours in orphanages and boarding schools for orphans and children left without parental care.

For a newly built boarding school at a general education institution, the main building of the general education institution and the building of the boarding school are connected by a warm transition.

4.34. Noise levels in the premises of a general educational institution should not exceed the hygienic standards for premises of residential, public buildings and residential areas

V. Requirements for premises and equipment

educational institutions

5.1. The number of jobs for students should not exceed the capacity of the educational institution provided for by the project according to which the building was built (reconstructed).

Each student is provided with a workplace (at a desk or table, game modules and others) in accordance with his height.

5.2. Depending on the purpose of the classrooms, various types of student furniture can be used: school desks, student tables (single and double), classroom, drawing or laboratory tables complete with chairs, desks and others. Stools or benches are not used instead of chairs.

Student furniture must be made of materials that are harmless to the health of children, and must comply with the growth and age characteristics of children and ergonomic requirements.

5.3. The main type of student furniture for students of the 1st stage of education should be a school desk, provided with a tilt regulator for the surface of the working plane. During the teaching of writing and reading, the slope of the working surface of the plane of the school desk should be 7-15. The front edge of the seat surface should go beyond the front edge of the working plane of the desk by 4 cm at the desks of the 1st number, by 5 - 6 cm - at the 2nd and 3rd numbers and by 7 - 8 cm at the desks of the 4th number.

The dimensions of the educational furniture, depending on the height of the students, must correspond to the values ​​\u200b\u200bgiven in Table 1.

A combined use of different types of student furniture (desks, desks) is allowed.

Depending on the height group, the height above the floor of the front edge of the desk top facing the student should have the following values: with a body length of 1150 - 1300 mm - 750 mm, 1300 - 1450 mm - 850 mm and 1450 - 1600 mm - 950 mm. The angle of inclination of the table top is 15 - 17 .

The duration of continuous work at the desk for students of the 1st stage of education should not exceed 7-10 minutes, and for students of the 2nd-3rd stage of education - 15 minutes.

5.4. For the selection of educational furniture according to the growth of students, its color marking is made, which is applied to the visible side outer surface of the table and chair in the form of a circle or stripes.

5.5. Desks (tables) are placed in classrooms by numbers: smaller ones are closer to the blackboard, larger ones are farther away. For children with hearing impairments, desks should be placed in the front row.

Children who often suffer from acute respiratory infections, tonsillitis, colds, should be seated further from outer wall.

At least twice during the academic year, students sitting on the outer rows, rows 1 and 3 (with a three-row arrangement of desks), change places without violating the correspondence of the furniture to their height.

In order to prevent postural disorders, it is necessary to cultivate the correct working posture for students from the first days of attending classes in accordance with the recommendations of Appendix 1 of these sanitary rules.

5.6. When equipping classrooms, the following dimensions of aisles and distances in centimeters are observed:

Between the rows of double tables - at least 60;

Between a row of tables and an outer longitudinal wall - at least 50 - 70;

Between a row of tables and an internal longitudinal wall (partition) or cabinets along this wall - at least 50;

From the last tables to the wall (partition) opposite the blackboard - at least 70, from the back wall, which is external - 100;

From the demonstration table to the training board - at least 100;

From the first desk to the training board - at least 240;

The greatest distance of the last place of the student from the educational board - 860;

The height of the lower edge of the training board above the floor is 70 - 90;

The distance from the blackboard to the first row of tables in square or transverse cabinets with a four-row arrangement of furniture is at least 300.

The angle of visibility of the board from the edge of the board 3.0 m long to the middle of the extreme place of the student at the front table must be at least 35 degrees for students of the II-III levels of education and at least 45 degrees for students of the I level of education.

The most distant place of employment from the windows should not be more than 6.0 m.

In educational institutions of the first climatic region, the distance of tables (desks) from the outer wall must be at least 1.0 m.

When installing desks in addition to the main student furniture, they are placed behind the last row of tables or the first row from the wall opposite the light-bearing one, in compliance with the requirements for the size of the passages and the distances between the equipment.

This arrangement of furniture does not apply to classrooms equipped with interactive whiteboards.

In newly constructed and reconstructed buildings of educational institutions, it is necessary to provide for a rectangular configuration of classrooms and classrooms with student tables located along the windows and left-hand natural lighting.

5.7. Chalkboards (using chalk) should be made of materials that adhere well to writing materials, clean well with a damp sponge, be durable, dark green in color and anti-reflective.

Blackboards should have trays for holding chalk dust, storing chalk, rags, and a holder for drawing supplies.

When using a marker board, the color of the marker should be contrasting (black, red, brown, dark tones blue and green).

It is allowed to equip classrooms and classrooms with interactive whiteboards that meet hygienic requirements. When using an interactive whiteboard and a projection screen, it is necessary to ensure its uniform illumination and the absence of bright spots of light.

5.8. Physics and chemistry classrooms should be equipped with special demonstration tables. To ensure better visibility of educational visual aids, the demonstration table is installed on the podium. Student and demonstration tables must have a coating that is resistant to aggressive chemicals and protective edges along the outer edge of the table.

The chemistry cabinet and the laboratory assistant are equipped with fume hoods.

5.9. The equipment of informatics classrooms must comply with hygienic requirements for personal electronic computers and the organization of work.

5.10. Workshops for labor training should have an area of ​​6.0 m 2 per 1 workplace. The placement of equipment in the workshops is carried out taking into account the creation of favorable conditions for visual work and maintaining the correct working posture.

Carpentry workshops are equipped with workbenches, arranged either at an angle of 45 to the window, or in 3 rows perpendicular to the light-bearing wall so that the light falls on the left. The distance between the workbenches must be at least 0.8 m in the front-rear direction.

In locksmith workshops, both left-handed and right-handed lighting is allowed with a perpendicular arrangement of workbenches to the light-bearing wall. The distance between the rows of single workbenches should be at least 1.0 m, double - 1.5 m. The vise is attached to the workbenches at a distance of 0.9 m between their axes. Locksmith workbenches must be equipped with a safety net 0.65 - 0.7 m high.

Drilling, grinding and other machines should be installed on a special foundation and equipped with safety nets, glass and local lighting.

Carpentry and locksmith workbenches should be appropriate for the height of students and equipped with footrests.

The dimensions of the tools used for carpentry and metalwork must correspond to the age and height of the students (Appendix 2 of these sanitary rules).

Locksmith and carpentry workshops and service work rooms are equipped with washbasins with cold and hot water supply, electric towels or paper towels.

5.11. In newly constructed and reconstructed buildings of educational institutions in the classrooms of home economics, it is necessary to provide for the presence of at least two rooms: for teaching cooking skills and for cutting and sewing.

5.12. In the home economics classroom used for teaching cooking skills, it is planned to install two-slot sinks with cold and hot water supply with a mixer, at least 2 tables with hygienic coating, a refrigerator, an electric stove and a cupboard for storing dishes. Approved detergents for washing tableware must be provided near sinks.

5.13. The home economics cabinet, used for cutting and sewing, is equipped with tables for drawing patterns and cutting, sewing machines.

Sewing machines are installed along windows to provide left-hand natural light to the work surface. sewing machine or opposite a window for direct (front) natural light to the work surface.

5.14. In the existing buildings of educational institutions, in the presence of one home economics cabinet, a separate place is provided for placing an electric stove, cutting tables, a sink for dishes and a washbasin.

5.15. Labor training workshops and a home economics office, gyms should be equipped with first aid kits.

5.16. The equipment of classrooms intended for artistic creativity, choreography and music must comply with sanitary and epidemiological requirements for institutions of additional education for children.

5.17. In the playrooms, furniture, play and sports equipment should correspond to the growth data of students. Furniture should be placed around the perimeter of the game room, thereby freeing up the maximum part of the area for outdoor games.

When using upholstered furniture, it is necessary to have removable covers (at least two), with their obligatory replacement at least once a month and as they get dirty. Special cabinets are installed for storing toys and manuals.

Televisions are installed on special cabinets at a height of 1.0 - 1.3 m from the floor. When watching TV programs, the placement of spectator seats should ensure a distance of at least 2 m from the screen to the eyes of students.

5.18. Bedrooms for first-graders attending an extended day group should be separate for boys and girls. They are equipped with teenage (size 1600 x 700 mm) or built-in single-tier beds. The beds in the bedrooms are arranged in compliance with the minimum gaps: from the outer walls - at least 0.6 m, from the heaters - 0.2 m, the width of the passage between the beds - at least 1.1 m, between the headboards of two beds - 0.3 - 0.4 m.

VI. Air-thermal requirements

6.1. Buildings of educational institutions are equipped with centralized heating and ventilation systems, which must comply with the design and construction standards for residential and public buildings and provide optimal microclimate and air parameters.

Steam heating is not used in institutions. When installing fences for heating appliances, the materials used must be harmless to the health of children.

Fences made of particle boards and other polymeric materials are not allowed.

Do not use portable heaters, as well as heaters with infrared radiation.

6.2. The air temperature, depending on climatic conditions in classrooms and offices, psychologist and speech therapist's offices, laboratories, assembly hall, canteen, recreation, library, lobby, wardrobe should be 18 - 24 C; in the gym and rooms for sectional classes, workshops - 17 - 20 C; bedroom, playrooms, premises of preschool education units and school boarding school - 20 - 24 C; medical offices, locker rooms of the gym - 20 - 22 C, showers - 25 C.

For control temperature regime classrooms and classrooms should be equipped with household thermometers.

6.3. During extracurricular time, in the absence of children in the premises of a general educational institution, a temperature of at least 15 C must be maintained.

6.4. In the premises of educational institutions, the relative humidity of the air should be 40 - 60%, the speed of air movement should not exceed 0.1 m / s.

6.5. In the presence of stove heating in existing buildings of educational institutions, a firebox is arranged in the corridor. To avoid indoor air pollution with carbon monoxide, chimneys are closed no earlier than the complete combustion of fuel and no later than two hours before the arrival of students.

For newly constructed and reconstructed buildings of educational institutions stove heating not allowed.

6.6. Educational rooms are ventilated during breaks, and recreational rooms are ventilated during lessons. Before the start of classes and after their completion, it is necessary to carry out through ventilation of the classrooms. The duration of cross-ventilation is determined by weather conditions, wind direction and speed, efficiency heating system. The recommended duration of cross-ventilation is shown in Table 2.

6.7. Physical education lessons and sports sections should be held in well-aerated sports halls.

It is necessary to open one or two windows on the leeward side during classes in the hall at an outdoor temperature above plus 5 C and a wind speed of no more than 2 m / s. At a lower temperature and a higher speed of air movement, classes in the hall are carried out with one or three transoms open. When the outside air temperature is below minus 10 C and the air speed is more than 7 m/s, through ventilation of the hall is carried out in the absence of students for 1 - 1.5 minutes; during big breaks and between shifts - 5 - 10 minutes.

When the air temperature reaches plus 14 C, airing in the gym should be stopped.

6.8. Windows must be equipped with hinged transoms with lever devices or vents. The area of ​​transoms and vents used for ventilation in classrooms must be at least 1/50 of the floor area. Transoms and vents should function at any time of the year.

6.9. When replacing window blocks, the glazing area must be maintained or increased.

The plane of opening of windows should provide a mode of ventilation.

6.10. Glazing of windows must be made of solid fiberglass. Broken glass must be replaced immediately.

6.11. Separate exhaust ventilation systems should be provided for the following premises: classrooms and classrooms, assembly halls, swimming pools, shooting ranges, a canteen, a medical center, a cinema room, sanitary facilities, rooms for processing and storing cleaning equipment, carpentry and locksmith workshops.

Mechanical exhaust ventilation is equipped in workshops and service rooms where stoves are installed.

6.12. The concentration of harmful substances in the air of the premises of educational institutions should not exceed the hygienic standards for atmospheric air in populated areas.

VII. Requirements for natural and artificial lighting

7.1. Daylight.

7.1.1. All classrooms must have natural lighting in accordance with the hygienic requirements for natural, artificial, combined lighting of residential and public buildings.

7.1.2. Without natural lighting, it is allowed to design: shell, washrooms, showers, toilets at the gym; showers and toilets for staff; storerooms and warehouses, radio nodes; film and photo laboratories; book depositories; boiler, pump water supply and sewerage; ventilation and air conditioning chambers; control units and other premises for the installation and management of engineering and technological equipment buildings; storage facilities for disinfectants.

7.1.3. In classrooms, side natural left-hand lighting should be designed. If the depth of the classrooms is more than 6 m, it is necessary to have a right-hand lighting device, the height of which must be at least 2.2 m from the floor.

The direction of the main light flux in front and behind the students is not allowed.

7.1.4. In workshops for labor training, assembly and sports halls, two-sided lateral natural lighting can be used.

7.1.5. In the premises of educational institutions, normalized values ​​​​of the coefficient of natural illumination (KEO) are provided in accordance with the hygienic requirements for natural, artificial, combined lighting of residential and public buildings.

7.1.6. In classrooms with one-sided lateral natural lighting, KEO on the working surface of the desks at the point of the room furthest from the windows should be at least 1.5%. With two-sided lateral natural lighting, the KEO indicator is calculated on the middle rows and should be 1.5%.

The luminous coefficient (SC - the ratio of the glazed surface area to the floor area) must be at least 1:6.

7.1.7. The windows of the classrooms should be oriented to the south, southeast and east sides of the horizon. The windows of the drafting and drawing rooms, as well as the kitchen room, can be oriented to the northern sides of the horizon. The orientation of the informatics classrooms is to the north, northeast.

7.1.8. The light openings of the classrooms, depending on the climatic zone, are equipped with adjustable sun protection devices (lifting and turning blinds, fabric curtains) with a length not lower than the level of the window sill.

It is recommended to use curtains made of light-colored fabrics that have a sufficient degree of light transmission, good light-scattering properties, which should not reduce the level of natural light. The use of curtains (curtains), including curtains with lambrequins, made of PVC film and other curtains or devices that limit natural light is not allowed.

In the non-working state, the curtains must be placed in the piers between the windows.

7.1.9. For rational use daylight and uniform lighting of classrooms should:

Do not paint over window panes;

Do not place flowers on window sills, they are placed in portable flower beds 65 - 70 cm high from the floor or hanging planters in the piers between the windows;

Cleaning and washing of glasses should be carried out as they get dirty, but at least 2 times a year (in autumn and spring).

The duration of insolation in classrooms and classrooms should be continuous, in duration not less than:

2.5 hours in the northern zone (north of 58 degrees N);

2.0 hours in the central zone (58 - 48 degrees north latitude);

1.5 hours in the southern zone (south of 48 degrees N).

The absence of insolation is allowed in the classrooms of computer science, physics, chemistry, drawing and drafting, sports and fitness rooms, catering facilities, assembly hall, administrative and utility rooms.

7.2. artificial lighting

7.2.1. In all premises of a general educational institution, levels of artificial illumination are provided in accordance with the hygienic requirements for natural, artificial, combined lighting of residential and public buildings.

7.2.2. In the classrooms, the general lighting system is provided by ceiling lights. Fluorescent lighting is provided using lamps according to the color emission spectrum: white, warm white, natural white.

Luminaires used for artificial lighting of classrooms should provide a favorable distribution of brightness in the field of view, which is limited by the discomfort index (Mt). The indicator of discomfort of the lighting installation of general lighting for any workplace in the class should not exceed 40 units.

7.2.3. Do not use fluorescent lamps and incandescent lamps for general lighting in the same room.

7.2.4. In classrooms, classrooms, laboratories, illumination levels must comply with the following standards: on desktops - 300 - 500 lux, in technical drawing and drawing rooms - 500 lux, in computer science classrooms on tables - 300 - 500 lux, on a blackboard - 300 - 500 lux, in assembly and sports halls (on the floor) - 200 lux, in recreations (on the floor) - 150 lux.

When using computer technology and the need to combine the perception of information from the screen and keeping records in a notebook, the illumination on the tables of students should be at least 300 lux.

7.2.5. In classrooms, a general lighting system should be used. Luminaires with fluorescent lamps are located parallel to the light-bearing wall at a distance of 1.2 m from the outer wall and 1.5 m from the inner one.

7.2.6. A blackboard that does not have its own glow is equipped with local lighting - spotlights designed to illuminate blackboards.

7.2.7. When designing an artificial lighting system for classrooms, it is necessary to provide for separate switching on of lighting lines.

7.2.8. For the rational use of artificial light and uniform illumination of classrooms, it is necessary to use finishing materials and paints that create a matte surface with reflection coefficients: for the ceiling - 0.7 - 0.9; for walls - 0.5 - 0.7; for the floor - 0.4 - 0.5; for furniture and desks - 0.45; for blackboards - 0.1 - 0.2.

It is recommended to use the following paint colors: for ceilings - white, for walls of classrooms - light colors of yellow, beige, pink, green, blue; for furniture (cabinets, desks) - color natural wood or light green; for chalkboards - dark green, dark brown; for doors window frames- white.

7.2.9. It is necessary to clean the lighting fittings of luminaires as they get dirty, but at least 2 times a year and replace burned-out lamps in a timely manner.

7.2.10. Faulty, burnt-out fluorescent lamps are collected in a container in a specially designated room and sent for recycling in accordance with applicable regulations.

VIII. Requirements for water supply and sewerage

8.1. Buildings of educational institutions should be equipped centralized systems domestic and drinking water supply, sewerage and drains in accordance with the requirements for public buildings and structures in terms of domestic and drinking water supply and sanitation.

Cold and hot centralized water supply is provided for the premises of a general educational institution, preschool education and a boarding school at a general educational institution, including: catering facilities, a canteen, pantry, showers, washrooms, personal hygiene cabins, medical facilities, labor training workshops, home economics rooms, primary classrooms, drawing rooms, physics, chemistry and biology rooms, laboratory rooms, rooms for processing cleaning equipment and toilets in newly built and reconstructed educational institutions.

8.2. If there is no centralized water supply in the settlement in the existing buildings of educational institutions, it is necessary to ensure a continuous supply of cold water to the premises of the catering unit, medical premises, toilets, boarding school premises at a general educational institution and preschool education and the installation of water heating systems.

8.3. Educational institutions provide water that meets the hygienic requirements for the quality and safety of drinking water.

8.4. In the buildings of educational institutions, the canteen sewerage system should be separate from the rest and have an independent outlet in outdoor system sewerage. The risers of the sewerage system from the upper floors should not pass through the production premises of the canteen.

8.5. In non-sewered rural areas, the buildings of educational institutions are equipped with internal sewerage(such as backlash closets) subject to the installation of local treatment facilities. Outdoor toilets are allowed.

8.6. In general educational institutions, the drinking regime of students is organized in accordance with the sanitary and epidemiological requirements for catering for students in general educational institutions, institutions of primary and secondary vocational education.

IX. Requirements for the premises and equipment of educational institutions located in adapted buildings

9.1. Placement of educational institutions in adapted premises is possible for the duration of the overhaul(reconstruction) of the existing main buildings of educational institutions.

9.2. When placing a general education institution in an adapted building, it is necessary to have a mandatory set of premises: classrooms, catering facilities, medical facilities, recreation, administrative and utility rooms, bathrooms, cloakrooms.

9.3. The areas of classrooms and classrooms are determined based on the number of students in one class in accordance with the requirements of these sanitary rules.

9.4. If it is not possible to equip your own sports hall, you should use sports facilities located near a general education institution, subject to their compliance with the requirements for the arrangement and maintenance of places for physical culture and sports.

9.5. For small-scale general educational institutions located in rural areas, in the absence of the ability to equip their own medical center, it is allowed to organize medical care at feldsher-obstetric stations and outpatient clinics.

9.6. In the absence of a wardrobe, it is allowed to equip individual lockers located in recreations, corridors.

X. Hygienic requirements for the mode of the educational process

10.1. The optimal age for starting school is not earlier than 7 years. Children of the 8th or 7th year of life are admitted to the 1st grade. Admission of children of the 7th year of life is carried out when they reach the age of at least 6 years 6 months by September 1 of the academic year.

The class capacity, with the exception of compensatory education classes, should not exceed 25 people.

10.2. The education of children under the age of 6 years and 6 months by the beginning of the school year should be carried out in a preschool educational institution or in a general educational institution in compliance with all hygienic requirements for the conditions and organization of the educational process for preschool children.

10.3. To prevent overwork of students in the annual calendar curriculum, it is recommended to provide for an even distribution of periods of study time and holidays.

10.4. Classes should start no earlier than 8:00. Zero lessons are not allowed.

In institutions with in-depth study of individual subjects, lyceums and gymnasiums, training is carried out only in the first shift.

In institutions operating in two shifts, education of 1st, 5th, graduating 9th and 11th grades and classes of compensatory education should be organized in the first shift.

Education in 3 shifts in general educational institutions is not allowed.

10.5. The number of hours allotted for students to master the curriculum of a general education institution, which consists of a mandatory part and a part formed by participants in the educational process, should not exceed the total weekly educational load.

The value of the weekly educational load (number of training sessions), implemented through classroom and extracurricular activities, is determined in accordance with Table 3.

The organization of specialized education in grades 10-11 should not lead to an increase in the educational load. The choice of a training profile should be preceded by career guidance work.

10.6. The educational weekly load must be evenly distributed during the school week, while the volume of the maximum permissible load during the day should be:

For students of the 1st grade, it should not exceed 4 lessons and 1 day a week - no more than 5 lessons at the expense of a physical education lesson;

For students of grades 2-4 - no more than 5 lessons, and once a week 6 lessons at the expense of a physical education lesson with a 6-day school week;

For students in grades 5 - 6 - no more than 6 lessons;

For students in grades 7 - 11 - no more than 7 lessons.

The schedule of lessons is compiled separately for compulsory and optional classes. Extracurricular activities should be scheduled on the days with the fewest compulsory lessons. Between the start of extracurricular activities and the last lesson, it is recommended to arrange a break of at least 45 minutes.

10.7. The schedule of lessons is compiled taking into account the daily and weekly mental performance of students and the scale of the difficulty of educational subjects (Appendix 3 of these sanitary rules).

10.8. When scheduling lessons, one should alternate subjects of various complexity during the day and week: for students of the 1st stage of education, the main subjects (mathematics, Russian and foreign language, natural history, computer science) alternate with lessons in music, fine arts, labor, physical education; for students of the II and III stages of education, subjects of natural and mathematical profile alternate with humanitarian subjects.

For students of the 1st grade, the most difficult subjects should be taught in the 2nd lesson; 2 - 4 grades - 2 - 3 lessons; for students of 5th - 11th grades at 2nd - 4th lessons.

There are no double lessons in the elementary grades.

During the school day, you should not conduct more than one control work. Examinations are recommended to be carried out at the 2nd - 4th lessons.

10.9. The duration of a lesson (academic hour) in all classes should not exceed 45 minutes, with the exception of the 1st grade, in which the duration is regulated by paragraph 10.10 of these sanitary rules, and the compensating class, the duration of the lesson in which should not exceed 40 minutes.

Density academic work students in the lessons in the main subjects should be 60 - 80%.

10.10. Education in the 1st grade is carried out in compliance with the following additional requirements:

Training sessions are held on a 5-day school week and only on the first shift;

The use of a "stepped" learning mode in the first half of the year (in September, October - 3 lessons per day, 35 minutes each, in November - December - 4 lessons of 35 minutes each; January - May - 4 lessons of 45 minutes each) ;

For those attending an extended day group, it is necessary to organize daytime sleep (at least 1 hour), 3 meals a day and walks;

Training is conducted without scoring the knowledge of students and homework;

Additional weekly holidays in the middle of the third quarter in the traditional mode of study.

10.11. To prevent fatigue and save optimal level working capacity during the week, students should have an easy school day on Thursday or Friday.

10.12. The duration of the breaks between lessons is at least 10 minutes, the big break (after the 2nd or 3rd lessons) is 20 - 30 minutes. Instead of one big break, it is allowed to set two breaks of 20 minutes each after the 2nd and 3rd lessons.

It is recommended to organize changes in the open air. For this purpose, during the daily dynamic pause it is recommended to increase the duration of a long break up to 45 minutes, of which at least 30 minutes are allocated to the organization of motor-active activities for students on the sports ground of the institution, in the gym or in recreation.

10.13. The break between shifts should be at least 30 minutes for wet cleaning in the premises and their ventilation, in case of an unfavorable epidemiological situation for disinfection treatment, the break is increased to 60 minutes.

10.14. The use of innovative educational programs and technologies, class schedules, training modes in the educational process is possible in the absence of their adverse effect on the functional state and health of students.

10.15. In small-scale rural educational institutions, depending on the specific conditions, the number of students, their age characteristics, it is allowed to form classes-sets of students at the first stage of education. In this case, separate training of students is optimal. different ages I stage of education.

When combining students of the first stage of education into a class-set, it is optimal to create it from two classes: grades 1 and 3 (1 + 3), grades 2 and 3 (2 + 3), grades 2 and 4 (2 + 4). To prevent fatigue of students, it is necessary to reduce the duration of combined (especially 4th and 5th) lessons by 5-10 minutes. (except for the lesson of physical culture). The occupancy of the classes-sets must comply with Table 4.

10.16. In classes of compensatory education, the number of students should not exceed 20 people. The duration of the lessons should not exceed 40 minutes. Correctional and developmental classes are included in the volume of the maximum allowable weekly load established for a student of each age.

Regardless of the length of the school week, the number of lessons per day should not be more than 5 in primary grades (except first grade) and more than 6 lessons in grades 5-11.

To prevent overwork and maintain an optimal level of performance, a light training day is organized - Thursday or Friday.

To facilitate and shorten the period of adaptation to the educational process of students in compensatory classes, medical and psychological assistance should be provided by educational psychologists, pediatricians, speech therapists, and other specially trained teachers, as well as using information and communication technologies, visual aids.

10.17. In order to prevent fatigue, impaired posture and vision of students in the classroom, physical education and gymnastics for the eyes should be carried out (Appendix 4 and Appendix 5 of these sanitary rules).

10.18. It is necessary to alternate during the lesson various types of educational activities (with the exception of control works). Average continuous duration various kinds educational activities of students (reading from paper, writing, listening, questioning, etc.) in grades 1-4 should not exceed 7-10 minutes, in grades 5-11 - 10-15 minutes. The distance from the eyes to the notebook or book should be at least 25-35 cm for students in grades 1-4 and at least 30-45 cm for students in grades 5-11.

The duration of continuous use of technical teaching aids in the educational process is set according to Table 5.

After using technical training aids associated with visual load, it is necessary to conduct a set of exercises to prevent eye fatigue (Appendix 5), and at the end of the lesson - physical exercises to prevent general fatigue (Appendix 4).

10.19. The mode of training and organization of the work of classrooms using computer technology must comply with the hygienic requirements for personal electronic computers and the organization of work on them.

10.20. To meet the biological need for movement, regardless of the age of students, it is recommended to conduct at least 3 physical education lessons per week, provided for in the volume of the maximum allowable weekly load. It is not allowed to replace physical education lessons with other subjects.

10.21. To increase the motor activity of students, it is recommended to include in the curricula for students subjects of a motor-active nature (choreography, rhythm, modern and ballroom dancing, teaching traditional and national sports games).

10.22. Motor activity of students in addition to physical education lessons in the educational process can be provided by:

Organized outdoor games at recess;

Sports hour for children attending an extended day group;

Extra-curricular sports activities and competitions, school-wide sports events, health days;

Independent physical education classes in sections and clubs.

10.23. Sports loads in physical education classes, competitions, extracurricular sports activities during a dynamic or sports hour should correspond to the age, state of health and physical fitness of students, as well as weather conditions (if they are organized outdoors).

The distribution of students into the main, preparatory and special groups for participation in physical culture and recreation and sports events is carried out by the doctor, taking into account their state of health (or on the basis of certificates of their health). Students of the main physical culture group are allowed to participate in all sports and recreation activities in accordance with their age. With students of preparatory and special groups, physical culture and health work should be carried out taking into account the conclusion of a doctor.

Students assigned to the preparatory and special groups for health reasons are engaged in physical culture with a decrease in physical activity.

It is advisable to conduct physical education lessons outdoors. The possibility of conducting physical education classes in the open air, as well as outdoor games, is determined by the totality of weather conditions (temperature, relative humidity and air velocity) by climatic zones (Appendix 7).

On rainy, windy and frosty days, physical education classes are held in the hall.

10.24. The motor density of physical culture lessons should be at least 70%.

Students are allowed to test physical fitness, participate in competitions and hikes with the permission of a medical worker. His presence at sports competitions and at classes in swimming pools is mandatory.

10.25. In the labor classes provided for by the educational program, one should alternate tasks of a different nature. You should not perform one type of activity in the lesson throughout the entire time of independent work.

10.26. All work in workshops and home economics classrooms is performed by students in special clothes (robe, apron, beret, scarf). Protective goggles must be worn when performing work that poses a risk of injury to the eyes.

10.27. When organizing practice and socially useful work of students, provided for by the educational program, associated with a large physical activity(carrying and moving heavy loads), it is necessary to be guided by the sanitary and epidemiological requirements for the safety of working conditions for workers under the age of 18.

It is not allowed to involve students in work with harmful or dangerous working conditions, during which the use of labor is prohibited, persons under 18 years of age, as well as in cleaning sanitary facilities and common areas, washing windows and lamps, removing snow from roofs and other similar works.

For agricultural work (practice) in regions of the II climatic zone, it is necessary to set aside mainly the first half of the day, and in regions of the III climatic zone - the second half of the day (16 - 17 hours) and the hours with the least insolation. Agricultural equipment used for work must be appropriate for the height and age of students. The permissible duration of work for students aged 12 - 13 is 2 hours; for teenagers 14 years and older - 3 hours. Every 45 minutes of work, it is necessary to arrange regulated 15-minute breaks for rest. Work on sites and in premises treated with pesticides and agrochemicals is allowed within the time limits established by the State Catalog of Pesticides and Agrochemicals.

10.28. When organizing extended day groups, it is necessary to follow the recommendations set out in Annex 6 of these sanitary rules.

10.29. Club work in extended day groups should take into account the age characteristics of students, ensure a balance between motor-active and static classes, and is organized in accordance with sanitary and epidemiological requirements for institutions of additional education for children.

10.30. The volume of homework (for all subjects) should be such that the time spent on its completion does not exceed (in astronomical hours): in grades 2-3 - 1.5 hours, in grades 4-5 - 2 hours, in grades 6 - 8 classes - 2.5 hours, in 9 - 11 classes - up to 3.5 hours.

10.31. During the final certification, it is not allowed to conduct more than one exam per day. The break between examinations must be at least 2 days. With the duration of the exam 4 or more hours, it is necessary to organize meals for students.

10.32. The weight of a daily set of textbooks and stationery should not exceed: for students in grades 1-2 - more than 1.5 kg, for students in grades 3-4 - more than 2 kg; 5 - 6 - more than 2.5 kg, 7 - 8 - more than 3.5 kg, 9 - 11 - more than 4.0 kg.

10.33. In order to prevent violations of posture, students are recommended to have two sets of textbooks for primary school: one for use in lessons in a general education institution, the second for homework.

XI. Requirements for the organization of medical care for students and the passage of medical examinations by employees of educational institutions

11.1. Medical care for students should be organized in all educational institutions.

11.2. Medical examinations of students in general educational institutions and pupils of preschool education units should be organized and carried out in the manner established by the federal executive body in the field of healthcare.

11.3. Students are allowed to attend classes in a general education institution after suffering a disease only if they have a certificate from a pediatrician.

11.4. In all types of educational institutions, work is organized to prevent infectious and non-infectious diseases.

11.5. In order to detect pediculosis, at least 4 times a year after each vacation and monthly selectively (four to five classes), medical personnel must conduct examinations of children. Examinations (scalp and clothing) are carried out in a well-lit room, using a magnifying glass and fine combs. After each inspection, the comb is doused with boiling water or wiped with a 70% alcohol solution.

11.6. If scabies and pediculosis are detected, students are suspended from visiting the institution for the duration of the treatment. They can be admitted to a general education institution only after the completion of the entire complex of therapeutic and preventive measures, confirmed by a certificate from a doctor.

The issue of preventive treatment of persons who have been in contact with a patient with scabies is decided by the doctor, taking into account the epidemiological situation. Those who were in close household contact are involved in this treatment, as well as entire groups, classes where several cases of scabies are registered, or where new patients are detected in the process of monitoring the focus. In organized groups where preventive treatment of contact persons was not carried out, examination skin students are carried out three times with an interval of 10 days.

If scabies is detected in an institution, current disinfection is carried out in accordance with the requirements of the territorial body exercising state sanitary and epidemiological supervision.

11.7. It is recommended to draw up a health sheet in the class journal, in which information about anthropometric data, health group, physical education group, health status, recommended size of educational furniture, as well as medical recommendations are entered for each student.

11.8. All employees of a general education institution undergo preliminary and periodic medical examinations and must be vaccinated in accordance with the national vaccination schedule. Each employee of a general educational institution must have a personal medical book of the established form.

Employees who evade medical examinations are not allowed to work.

11.9. Pedagogical workers of educational institutions undergo professional hygienic training and certification during employment.

XII. Requirements for the sanitary maintenance of the territory and premises

12.1. The territory of the educational institution must be kept clean. Cleaning of the territory is carried out daily before the exit of students to the site. In hot, dry weather, the surfaces of the playgrounds and the grass cover are recommended to be watered 20 minutes before the start of the walk and sports activities. In winter, grounds and footpaths should be cleared of snow and ice.

Garbage is collected in garbage bins, which must be tightly closed with lids, and when 2/3 of their volume is filled, they are taken to municipal solid waste landfills in accordance with a contract for the removal of domestic waste. After being released, the containers (garbage bins) must be cleaned and treated with disinfectant (disinfestation) agents permitted in the prescribed manner. It is not allowed to burn garbage on the territory of a general educational institution, including in garbage bins.

12.2. Annually (in spring) they carry out decorative pruning of shrubs, cutting down young shoots, dry and low branches. If there are tall trees directly in front of the windows of the classrooms that cover the light openings and reduce the values ​​\u200b\u200bof the indicators of natural light below the normalized ones, measures are taken to cut down or trim their branches.

12.3. All premises of a general educational institution are subject to daily wet cleaning using detergents.

Toilets, canteens, lobbies, recreation areas are subject to wet cleaning after each change.

Cleaning of educational and auxiliary premises is carried out after the end of the lessons, in the absence of students, with open windows or transoms. If a general education institution works in two shifts, cleaning is carried out at the end of each shift: floors are washed, dust accumulation areas (window sills, radiators, etc.) are wiped.

Cleaning of boarding school premises at a general educational institution is carried out at least 1 time per day.

For cleaning and disinfection in a general educational institution and a boarding school at a general educational institution, detergents and disinfectants are used that are approved in accordance with the established procedure for use in children's institutions, following the instructions for their use.

Disinfectant solutions for mopping are prepared before direct use in the toilet rooms in the absence of students.

12.4. Disinfectants and detergents are stored in the manufacturer's packaging, in accordance with the instructions and in places inaccessible to students.

12.5. In order to prevent the spread of infection in an unfavorable epidemiological situation in a general education institution, additional anti-epidemic measures are taken according to the instructions of the bodies authorized to exercise state sanitary and epidemiological supervision.

12.6. At least once a month, general cleaning is carried out in all types of premises of a general educational institution and a boarding school at a general educational institution.

General cleaning by technical staff (without the involvement of students) is carried out using approved detergents and disinfectants.

Exhaust ventilation grilles are cleaned of dust monthly.

12.7. In the sleeping quarters of a general educational institution and a boarding school at a general educational institution, bedding (mattresses, pillows, blankets) should be aired directly in the bedrooms with open windows during each general cleaning. Bed linen and towels are changed as they get dirty, but at least once a week.

Before the start of the school year, bedding is processed in a disinfection chamber.

In the restrooms, soap, toilet paper and towels must be available at all times.

12.8. Daily cleaning of toilets, showers, buffets, medical facilities is carried out using disinfectants, regardless of the epidemiological situation. Sanitary equipment is subject to daily disinfection. Wash cistern handles and door handles with warm soapy water. Sinks, toilet bowls, toilet seats are cleaned with ruffs or brushes, cleaners and disinfectants permitted in the prescribed manner.

12.9. In the medical office, in addition to disinfecting the premises and furnishings, it is necessary to disinfect medical instruments in accordance with the instructions for disinfection, pre-sterilization cleaning and sterilization of medical devices.

Preference should be given to sterile disposable medical devices.

12.10. When medical waste is generated, which, according to the degree of epidemiological danger, are classified as potentially hazardous waste, they are neutralized and disposed of in accordance with the rules for the collection, storage, processing, neutralization and disposal of all types of waste from medical institutions.

12.11. Cleaning equipment for cleaning premises must be marked and assigned to certain premises.

Cleaning equipment for cleaning sanitary facilities (buckets, basins, mops, rags) must have signal markings (red), be used for their intended purpose and be stored separately from other cleaning equipment.

12.12. At the end of cleaning, all cleaning equipment is washed with detergents, rinsed with running water and dried. Store cleaning equipment in the place designated for these purposes.

12.13. Sanitary maintenance of premises and disinfection measures in preschool education units are carried out in accordance with sanitary and epidemiological requirements for the arrangement, maintenance and organization of the working hours of preschool organizations.

12.14. The sanitary condition of the premises of the catering unit should be maintained taking into account the sanitary and epidemic requirements for catering for students in educational institutions. If there is a swimming pool, cleaning and disinfection of premises and equipment is carried out in accordance with sanitary regulations for swimming pools.

12.15. Sports equipment is subject to daily cleaning with detergents.

Sports equipment placed in the hall is wiped with a moistened rag, metal parts - with a dry rag at the end of each training shift. After each class, the gym is aired for at least 10 minutes. The sports carpet is cleaned daily using a vacuum cleaner, at least 3 times a month it is wet cleaned using a washing vacuum cleaner. Sports mats are cleaned daily with a soap and soda solution.

12.16. If there are carpets and carpets (in the premises of an elementary general education school, after-school groups, a boarding school), they are cleaned with a vacuum cleaner on a daily basis, and once a year they are dried and knocked out in the fresh air.

12.17. When synanthropic insects and rodents appear in the institution on the territory of the general educational institution and in all premises, it is necessary to carry out disinfestation and deratization by specialized organizations in accordance with regulatory and methodological documents.

In order to prevent the breeding of flies and destroy them in the development phase, once every 5 to 10 days, outdoor toilets are treated with approved disinfectants in accordance with the regulatory and methodological documents for the fight against flies.

XIII. Requirements for compliance with sanitary rules

13.1. The head of the educational institution is responsible for the organization and completeness of the implementation of these sanitary rules, including ensuring:

The presence in the institution of these sanitary rules and bringing their content to the employees of the institution;

Compliance with the requirements of sanitary rules by all employees of the institution;

Necessary conditions for compliance with sanitary rules;

Employment of persons with a permit for health reasons, who have undergone professional hygienic training and certification;

Availability of medical books for each employee and timely passage of periodic medical examinations;

Organization of measures for disinfection, disinfestation and deratization;

Availability of first aid kits and their timely replenishment.

13.2. The medical staff of the educational institution exercises daily control over compliance with the requirements of sanitary rules.

* Decree of the Government of the Russian Federation of March 31, 2009 N 277 "On Approval of the Regulation on Licensing Educational Activities".

Appendix 1 to SanPiN 2.4.2.2821-10

In order to form correct posture and maintaining health, it is necessary from the first days of training in a general education institution to educate and form the correct working posture of students at a school desk. For this, it is necessary to dedicate a special lesson in the first grades.

To form the correct posture, it is necessary to provide a workplace for the student with furniture in accordance with his height; teach him to maintain the correct working posture during training sessions, which is the least tiring: sit deep in a chair, keep your body and head straight; the legs should be bent at the hip and knee joints, the feet should rest on the floor, the forearms should lie freely on the table.

When placing the student at the desktop, the chair slides under the table so that when resting on the back, his palm is placed between the chest and the table.

For the rational selection of furniture in order to prevent disorders of the musculoskeletal system, it is recommended to equip all classrooms and classrooms with height rulers.

The teacher explains to the students how to hold the head, shoulders, hands, and emphasizes that one should not lean on the edge of the desk (table) with the chest; the distance from the eyes to the book or notebook should be equal to the length of the forearm from the elbow to the end of the fingers. Hands lie freely, not clinging to the table, the right hand and fingers of the left lie on the notebook. Both legs rest on the floor with the entire foot.

When mastering writing skills, the student leans on the back of the desk (chair) with his lower back, when the teacher explains, he sits more freely, leans on the back of the desk (chair) not only with the sacral-lumbar, but also with the subscapular part of the back. Teacher after explanation and demonstration proper fit at the desk asks the students of the whole class to sit correctly and, bypassing the class, corrects if necessary.

In the classroom, a table "Sit correctly when writing" should be placed so that students always have it before their eyes. At the same time, students need to show tables showing defects in posture resulting from improper landing. The development of a certain skill is achieved not only by explanation, supported by a demonstration, but also by systematic repetition. To develop the habit of correct landing pedagogical worker must daily monitor the correct posture of students during classes.

The role of the teacher in educating students in the correct fit is especially great during the first three to four years of study in a general education institution, when they develop this skill, as well as in subsequent years of study.

The teacher, in cooperation with parents, can give recommendations on choosing a satchel for textbooks and school supplies: the weight of the satchel without textbooks for students in grades 1-4 should be no more than 700 g. In this case, the satchel should have wide straps (4-4.5 cm) and sufficient dimensional stability, ensuring its snug fit to the student's back and uniform weight distribution. The material for the manufacture of knapsacks should be light, durable, with a water-repellent coating, easy to clean.

Annex 4 to SanPiN 2.4.2.2821-10

physical culture minutes (FM)

Training sessions that combine mental, static, dynamic loads on individual organs and systems and on the whole organism as a whole require physical training minutes (hereinafter referred to as FM) in the lessons to relieve local fatigue and FM of the general impact.

FM to improve cerebral circulation:

2. I.p. - sitting, hands on the belt. 1 - head turn to the right, 2 - ip, 3 - head turn to the left, 4 - ip Repeat 6 - 8 times. The pace is slow.

3. I.p. - standing or sitting, hands on the belt. 1 - swing your left hand over your right shoulder, turn your head to the left. 2 - ip, 3 - 4 - the same with the right hand. Repeat 4 - 6 times. The pace is slow.

FM to relieve fatigue from the shoulder girdle and arms:

1. I.p. - standing or sitting, hands on the belt. one - right hand forward, left up. 2 - change the position of the hands. Repeat 3-4 times, then relax down and shake your hands, tilt your head forward. The pace is average.

2. I.p. - standing or sitting, hands with the back on the belt. 1 - 2 - bring your elbows forward, tilt your head forward, 3 - 4 - elbows back, bend. Repeat 6-8 times, then arms down and shake relaxed. The pace is slow.

3. I.p. - sitting, hands up. 1 - clench the brushes into a fist, 2 - unclench the brushes. Repeat 6-8 times, then relax your arms down and shake your hands. The pace is average.

FM to relieve fatigue from the body:

1. I.p. - stand legs apart, hands behind the head. 1 - sharply turn the pelvis to the right. 2 - sharply turn the pelvis to the left. During turns, the shoulder girdle should remain motionless. Repeat 6 - 8 times. The pace is average.

2. I.p. - stand legs apart, hands behind the head. 1 - 5 - circular movements of the pelvis in one direction, 4 - 6 - the same in the other direction, 7 - 8 - arms down and shake your hands in a relaxed manner. Repeat 4 - 6 times. The pace is average.

3. I.p. - stand legs apart. 1 - 2 - tilt forward, the right hand slides down along the leg, the left, bending, up along the body, 3 - 4 - ip, 5 - 8 - the same in the other direction. Repeat 6 - 8 times. The pace is average.

FM of the general impact are completed from exercises for different muscle groups, taking into account their tension in the process of activity.

A set of FM exercises for students of the 1st stage of education in lessons with elements of writing:

1. Exercises to improve cerebral circulation. I.p. - sitting, hands on the belt. 1 - turn the head to the right, 2 - ip, 3 - turn the head to the left, 4 - ip, 5 - gently tilt the head back, 6 - ip, 7 - tilt the head forward. Repeat 4 - 6 times. The pace is slow.

2. Exercises to relieve fatigue from the small muscles of the hand. I.p. - sitting, hands raised up. 1 - clench the brushes into a fist, 2 - unclench the brushes. Repeat 6-8 times, then relax your arms down and shake your hands. The pace is average.

3. Exercise to relieve fatigue from the muscles of the body. I.p. - stand legs apart, hands behind the head. 1 - sharply turn the pelvis to the right. 2 - sharply turn the pelvis to the left. During turns, the shoulder girdle should remain motionless. Repeat 4 - 6 times. The pace is average.

4. Exercise to mobilize attention. I.p. - standing, arms along the body. 1 - right hand on the belt, 2 - left hand on the belt, 3 - right hand on the shoulder, 4 - left hand on the shoulder, 5 - right hand up, 6 - left hand up, 7 - 8 - clapping hands above the head, 9 - lower the left hand on the shoulder, 10 - the right hand on the shoulder, 11 - the left hand on the belt, 12 - the right hand on the belt, 13 - 14 - clapping hands on the hips. Repeat 4 - 6 times. The pace is 1 time slow, 2 - 3 times - medium, 4 - 5 - fast, 6 - slow.

Appendix 5 to SanPiN 2.4.2.2821-10

1. Blink quickly, close your eyes and sit quietly, slowly counting to 5. Repeat 4-5 times.

3. Stretch your right hand forward. Follow with your eyes, without turning your head, the slow movements of the index finger of the outstretched hand to the left and right, up and down. Repeat 4 - 5 times.

4. Look at forefinger outstretched arm at the expense of 1 - 4, then look into the distance at the expense of 1 - 6. Repeat 4 - 5 times.

5. At an average pace, do 3 - 4 circular movements with your eyes to the right side, the same amount to the left side. After relaxing the eye muscles, look into the distance at the expense of 1 - 6. Repeat 1 - 2 times.

Appendix 6 to SanPiN 2.4.2.2821-10

daycare groups

General provisions.

It is recommended to complete extended day groups from students of the same class or parallel classes. Stay of students in an extended day group at the same time educational process may cover the period of stay of students in a general education institution from 8.00 - 8.30 to 18.00 - 19.00.

Premises for extended day groups for students of grades I - VIII should be placed within the relevant educational sections, including recreation.

It is recommended for students of the first grades of the extended day group to allocate sleeping quarters and playrooms. In the absence of special rooms for organizing sleep and games in a general educational institution, they can be used universal premises, combining a bedroom and a playroom, equipped with built-in furniture: wardrobes, single-tier beds.

For students of grades II-VIII, depending on specific opportunities, it is recommended to allocate fixed premises for organizing gaming activities, circle work, classes at the request of students, daytime sleep for the weakened.

Daily regime.

In order to ensure the maximum possible health-improving effect and maintain the working capacity of students attending extended-day groups, it is necessary to rationally organize the daily routine, starting from the moment they enter the general educational institution, and to conduct extensive sports and recreational activities.

The best combination of activities for students in extended day groups is their physical activity in the air before the start of self-training (walking, outdoor and sports games, socially useful work on the site of a general educational institution, if it is provided for by the educational program), and after self-training - participation in emotional events (classes in circles, games, attending entertainment events, training and holding amateur concerts, quizzes and other events).

The daily routine must necessarily include: food, walking, daytime sleep for students of the 1st grade and weakened students of the 2nd - 3rd grades, self-training, socially useful work, circle work and a wide range of physical culture and recreation activities.

Outdoor recreation.

After the end of training sessions in a general education institution, to restore the working capacity of students, before doing homework, a rest of at least 2 hours is organized. Most of this time is spent outdoors. It is advisable to provide for walks:

Before lunch lasting at least 1 hour, after the end of school hours;

Before self-training for an hour.

It is recommended to accompany walks with sports, outdoor games and exercise. In winter, it is useful to organize ice skating and skiing 2 times a week. AT warm time year it is recommended to organize athletics, volleyball, basketball, tennis and other outdoor sports games. It is also recommended to use the swimming pool for swimming and water sports.

Students assigned to a special medical group or who have had acute illnesses perform exercises that are not associated with a significant load during sports and outdoor games.

The clothes of students during outdoor activities should protect them from hypothermia and overheating and not restrict movement.

In bad weather, outdoor games can be moved to well-ventilated areas.

A place for outdoor recreation and a sports hour can be a school site or specially equipped playgrounds. In addition, adjacent squares, parks, forests, stadiums can be used for these purposes.

Organization of daytime sleep for first-graders and weakened children.

Sleep relieves fatigue and excitement of children who have been in a large team for a long time, increases their performance. The duration of daytime sleep should be at least 1 hour.

For the organization of daytime sleep, either special sleeping rooms or universal rooms with an area of ​​\u200b\u200b4.0 m2 per student, equipped with teenage (size 1600 x 700 mm) or built-in single bunk beds, must be allocated.

When arranging the beds, it is necessary to observe the distance between: the long sides of the bed - 50 cm; headboards - 30 cm; bed and outer wall - 60 cm, and for the northern regions of the country - 100 cm.

Each student should be assigned a specific bed with a change of bed linen as it gets dirty, but at least once every 10 days.

Preparing homework.

When students do homework (self-study), the following recommendations should be observed:

The preparation of lessons should be carried out in a fixed classroom equipped with furniture corresponding to the growth of students;

Start self-training at 15 - 16 hours, since by this time there is a physiological rise in working capacity;

Limit the duration of homework so that the time spent on doing it does not exceed (in astronomical hours): in grades 2-3 - 1.5 hours, in grades 4-5 - 2 hours, in grades 6-8 - 2.5 hours, in grades 9-11 - up to 3.5 hours;

Provide, at the discretion of the students, the order in which homework is done, while recommending that they start with a subject of medium difficulty for this student;

Provide students with the opportunity to arrange arbitrary breaks at the end of a certain stage of work;

Conduct "physical training minutes" lasting 1-2 minutes;

Provide students who have completed their homework before the whole group, the opportunity to start classes of interest (in the game room, library, reading room).

Extracurricular activities.

Extracurricular activities are implemented in the form of excursions, circles, sections, olympiads, competitions, etc.

The duration of classes depends on age and type of activity. The duration of such activities as reading, music lessons, drawing, modeling, needlework, quiet games should be no more than 50 minutes a day for students in grades 1-2, and no more than one and a half hours a day for other classes. In music lessons, it is recommended to use elements of rhythm and choreography more widely. TV shows and movies should not be watched more than twice a week with a viewing time limit of up to 1 hour for students in grades 1-3 and 1.5 for students in grades 4-8.

It is recommended to use school-wide premises for organizing various types of extracurricular activities: reading, assembly and sports halls, a library, as well as premises of closely located cultural centers, children's leisure centers, sports facilities, stadiums.

Food.

Properly organized and rational nutrition is the most important health factor. When organizing an extended day in a general education institution, three meals a day for students should be provided: breakfast - at the second or third break during training sessions; lunch - during the stay on an extended day at 13-14 hours, afternoon tea - at 16-17 hours.

and placement of the banner is MANDATORY!!!

2.10. Cabinet of Informatics and Computer Engineering (IVT).

2.10.1. Sanitary and hygienic requirements

2.10.1.1. The premises of the IWT cabinet must have natural and artificial lighting in accordance with SanPiN 2.2.2.542-96.
2.10.1.2. The main stream of natural light should be on the left. The orientation of window openings should be north or northeast. It is not allowed to direct the main luminous flux of natural light behind and in front of the PC operating. With double-sided lighting at a depth of more than 6 m in the cabinet, a right-sided lighting device is required, the height of which must be at least 2.2 m from the floor.
2.10.1.3. In the lighting installations of the IWT cabinet, a general lighting system should be used, made by ceiling or pendant fluorescent lamps, evenly spaced along the ceiling in rows in the form of solid lines on both sides of the desktop with a PC or VDT. Lamps, as well as window light apertures, should not be reflected on the screens of a PC or VDT.
2.10.1.4. The illumination of the surface of student tables under artificial lighting should be in the range of 300-500 lux. Luminaires must have light-scattering fittings.
2.10.1.5. As light sources, it is recommended to use 40W, 58W fluorescent lamps or 36W energy-saving lamps of the LB, LHB type as the most efficient and acceptable in terms of spectral composition.
2.10.1.6. For classrooms with PCs and VDTs, lamps of the LP036 series with high-frequency ballasts (VChPRA) should be used. It is possible to allow the use of luminaires without VChPRA in the "oblique light" modification.
2.10.1.7. In rooms with a PC, due to air pollution by anthropogenic organic substances and carbon dioxide, it is recommended to have supply and exhaust ventilation that provides optimal temperature and humidity conditions for all climatic zones.

2.10.1.8. In the absence of supply and exhaust ventilation, air conditioning can be arranged using household air conditioners.
Calculation of air conditioners should be carried out by a ventilation engineer depending on their performance, the amount of excess heat from cars, people, solar radiation and artificial lighting sources.
2.10.1.9. The IWT office should be equipped with a washbasin with hot and cold water supply.
2.10.1.10. The power supply of the cabinet must be carried out in accordance with the requirements of GOST 28139-89 and PUE.
2.10.1.11. The supply of electrical voltage to the tables of students and teachers must be stationary and hidden.
2.10.1.12. The location of the electrical panel and the Residual Current Device should give the teacher the ability to instantly turn off the power supply system. Recommended placement is to the left or right of the chalkboard.
2.10.1.13. To ensure fire safety, the office of the MBT must be equipped with 2 carbon dioxide fire extinguishers (type OU-2).
2.10.1.14. For painting walls and panels, light colors of paints should be used (p = 0.5-0.6). The composition of the paints must exclude the occurrence of lime dust.
2.10.1.15. The surfaces of the enclosing structures of the cabinet, blackboard, desktops should be matte.
2.10.1.16. The surface of the floor must be smooth, without potholes, non-slip, easy to clean and wet cleaning, and have antistatic properties.
2.10.1.17. The content of harmful chemicals in indoor air using video display terminals (VDTs) and personal electronic computers (PCs) should not exceed the average daily concentrations for atmospheric air.
2.10.1.18. For interior decoration of the interior of premises with PCs and VDTs, it is not allowed to use synthetic materials that emit harmful chemicals and compounds into the air. These include chipboard, laminated paper plastic, washable wallpaper, rolled synthetic coatings, etc.
2.10.1.19. The noise level at the workplace in all classrooms with VDT and PC should not exceed 50 dBA. (Sanitary norms for permissible noise in the premises of residential and public buildings and on the territory of residential development N 3077-84, clause 7.2).

2.10.2. Requirements for the premises of the ICT office

2.10.2.1. The office of informatics and computer technology (MWT) is organized as an educational unit of a secondary general education and vocational school, a training and production plant, equipped with a set of educational computer equipment (KUVT), teaching and visual aids, educational equipment, furniture, office equipment and devices for conducting theoretical and practical, classroom, extra-curricular activities in the course "Fundamentals of Informatics and Computer Engineering" (OIVT), both basic and specialized. In addition, KIVT can be used in teaching various subjects, labor training.
2.10.2.2. The area of ​​the premises of the IWT office is determined in accordance with the requirements of the regulatory document "Educational and material base of an educational institution of general secondary education" part I. "Norms and requirements for educational buildings and school plots", as well as SanPiN 2.2.2.542-96.
2.10.2.3. Placement of KIVT in all educational institutions in the basement and basement is not allowed.
2.10.2.4. The minimum area per one PC must be at least 6 sq.m., and the volume - at least 24.0 cubic meters. with a height of at least 4 m. With a lower height of the training room, it is recommended to increase the area by one workplace.
2.10. 2. 5. At the office of IWT, a laboratory area of ​​at least 18 sq.m. should be organized. The laboratory room should have two exits: to the training room and to the landing or to recreation.
2.10.2.6. The area of ​​​​the office should allow you to arrange furniture in it in compliance with sanitary and hygienic standards.
2.10.2.7. The front wall of the KIVT is equipped with a blackboard for felt-tip pens, a screen, a cabinet for storing visual aids and information media.
2.10.2.8. At the entrance to the IWT office, built-in or wall-mounted cabinets (shelves) for briefcases should be provided.
2.10.2.9. To the left of the blackboard, in the teacher's working area, an electrical switchboard with a control panel for power supply to the workplaces of the teacher and students should be fixed on the wall.
2.10.2.10. Drawers for tables are installed under the board or separately under the stands. Holders (or a bar with holders) are attached to the upper edge of the board for hanging tables.
2.10.2.11. On the wall opposite the windows, exposition boards with permanent and temporary information are placed.
2.10.2.12. Along the back wall, it is possible to install a sectional cabinet for storing educational equipment and information media, depending on the area of ​​​​the office.
2.10.2.13. The upper part of the back wall of the classroom should be designed to display the manuals necessary for studying individual topics of the program.

2.10.3. Requirements for a set of furniture in the classroom

2.10.3.1. The office and the laboratory room must be equipped with a certain set of specialized furniture that meets the requirements of GOST 22046-89, which has a certificate of conformity with technical documentation and a hygiene certificate.
The office should have furniture for:
- organization of the teacher's workplace;
- organization of workplaces for students;
- for rational placement and storage of teaching aids;
- to organize the use of equipment.
2.10.3.2. The laboratory room should have the following furniture: radio editing table, office desk; shelving for storage of tools and a safe.
2.10.3.3. Furniture for organizing a teacher's workplace should include a table with a place for equipment (graphic projector) and a computer, a cabinet for a printer, a chair, and a blackboard.
2.10.3.4. Furniture for the organization of students' workplaces includes single student desks for a computer (GOST 11015-93) with chairs of different height groups No. 4,5,6) with color marking with lifting and swivel chairs.
2.10.3.5. Furniture for the rational placement and storage of educational equipment should consist of a combined cabinet in accordance with GOST 18666-95.

2.10.4. Requirements for the organization, jobs of teachers and students

2.10.4.1. The teacher's workplace is located on the podium and is equipped with a table equipped with equipment in accordance with the Lists, two cabinets (for a printer and a graph projector), a blackboard, a screen and an electrical switchboard with a control panel. The teacher's table must be supplied with power to connect a PC, printer, graph projector.
2.10.4.2. Dimensions of the teacher's table: cover length - not less than 1300 mm, mm, width - not less than 700 mm.
2.10.4.3. The pedestals should have 1-2 drawers with dimensions of 350x500x100 mm for accessories, magnetic media and banners based on the current day of classes.
2.10.4.4. For the MBT office, it is recommended to use a blackboard designed for writing with a felt-tip pen.
2.10.4.5. Students' workplaces equipped with personal computers (PCs) should consist of a single table and a lifting and swivel chair.
Additionally, the computer science room is equipped with double student tables (GOST 11015-93) in accordance with the number of jobs for students when working on a PC or VDT. Student tables are located in the center and are designed for theoretical classes. Tables and chairs should be of different height groups with color indication.

Furniture group	Chair seat front edge height, mm	Growth group, mm	Marking color	Table height, mm
4	380	1460 to 1600	Red	640
5	420	1600 to 1750	Green	700
6	460	1750 to 1800	Blue	760

2.10.4.6. The modular dimensions of the working surface of the table for VDT and PC, on the basis of which the design dimensions should be calculated, should be considered: width - 800, 1000, 1200, 1400 mm, depth - 800 and 1000 mm with its unregulated height equal to 725 mm.
2.10.4.7. The student's desk must be connected to the power supply and the LAN cable. The table must be anchored to the floor.
2.10.4.8. The arrangement of workplaces for students in KIVT should provide free access for students and teachers during the lesson to the workplace.
2.10.4.9. To ensure the safety of students and teachers, electrical safety and the creation of constant levels of illumination during work, a perimeter arrangement of desktops with a PC is recommended (row arrangement of student tables with a PC or VDT is not recommended.
2.10.4.10. The following distances must be observed for the perimeter arrangement of workplaces:
a) by the width of the cabinet:
- the distance between the wall with window openings and tables should be at least 0.8 m;
- the distance between the wall opposite the window openings and the tables with a PC should be about 0.1 m, and in some cases, depending on the video monitors used, the tables can be installed directly against the wall;
b) along the length of the KIVT tables with a PC can be placed without a gap and with a distance between them.
2.10.4.11. When tables with PCs are arranged in rows, each table must have a protective screen on the back of the video monitor. The screen is attached to the table at a distance of 3-5 cm, its area should be sufficient to protect the power wires.
2.10.4.12. The number of jobs for students can be 9, 12, 15, depending on the class size.

2.10.5. Requirements for equipping the office with equipment and
fixtures.

2.10.5.1. The number of student PCs required to equip the ICT room should be at the rate of one computer per student, taking into account the division of the class into two groups.
2.10.5.2. The IWT cabinet should include one machine for the teacher with appropriate peripheral equipment.
2.10.5.3. The IWT cabinet must be equipped with a graphic projector, a video recorder, a TV set (diagonal not less than 61 cm), a slide projector and a screen.
2.10.5.4. The demonstration TV is mounted 1.5 m from the floor on a bracket to the left of the blackboard.
2.10.5.5. The graphic projector should be located on a pedestal next to the teacher's desk.
2.10.5.6. When demonstrating filmstrips and transparencies (with a screen width of 1.2-1.4 m), the distance from the screen to the first tables of students (for theoretical classes) should be at least 2.7 m, and to the last tables no more than 8.6 m.
The height of the lower edge of the screen above the podium is at least 0.8 m.
The optimal zone for watching TV shows and videos is located at a distance of at least 2.7 m from the TV screen to the first double tables of students (during theoretical classes).

2.10.6. Requirements for equipping the classroom with educational equipment and necessary documentation.

2.10.6.1. The composition of educational equipment in the office of the MVT is determined by the "List of computer equipment, educational equipment, basic and applied software for computer science classrooms, classes with VDT and PC in educational institutions of the general secondary education system."
2.10.6.2. The IT cabinet should be equipped with:
- educational software for the course "Fundamentals of Informatics and Computer Engineering", both basic and specialized;
- tasks for the implementation of an individual approach to teaching, organization of independent work and exercises for students on computers;
- a set of popular science, reference and methodological literature;
- a journal of introductory and periodic safety briefings for students (recommended);
- a log of the use of a set of educational computer equipment at each workplace;
- journal of failure of machines and their repair;
- holders for demonstrating tables and stands for exhibiting students' work;
- an inventory book for accounting for the educational equipment available in the classroom, annual plans for the retrofitting of KIVT, approved by the school principal;
- pharmacy first aid;
- means of fire extinguishing.
2.10.6.3. In the IWT office there should be a card file of educational equipment indicating the storage locations.

2.10.7. Requirements for placement and storage of equipment

2.10.7.1. Educational equipment and aids should be placed and stored in a sectional cabinet located in the laboratory and having adjustable shelves and half-shelves, according to the sections of the program.
2.10.7.2. Demonstration aids and DIY equipment should be kept separate.
2.10.7.3. Discs with software should be stored in special small boxes, protected from dust and light, according to classes and sections of the program; the drawers are placed in the cabinet, and the places for storing disks in it are marked with inscriptions.
2.10.7.4. Tables should be stored in boxes under the blackboard or in special compartments according to sections of the program and classes, taking into account the dimensions.
2.10.7.5. Audiovisual aids should be stored on cabinet shelves, filmstrips and transparencies - in stacks with recesses for boxes. Cells and boxes must be labeled.
2.10.7.6. Reference, educational and methodical and popular scientific literature should be stored on the shelves of the cabinet.

2.10.8. Requirements for the interior design of the office of informatics and computer technology

2.10.8.1. The manuals necessary for the study of individual topics, sections of the course, should be exhibited on the wall of the office, opposite the blackboard.
2.10.8.2. For the exposition of books and materials, the cabinet should be equipped with removable stands.
2.10.8.3. On the wall opposite the windows, boards are placed with reference tables permanently located in the classroom, acquainting students with safety regulations, the main computer components and their functions.
2.10.8.4. On one of the walls, along with the stands, a table "Rules for the work of students on a PC and VDT" should be placed.
2.10.8.5. Different fonts can be used in the design of stands: printed and handwritten, Arabic and Gothic. Headings and subheadings should be in the same style.

Requirements for the office of informatics and computer technology.

Liked? Please thank us! It's free for you, and it's a big help to us! Add our site to your social network:

Sanitary and hygienic requirements for the computer science cabinet

1. The premises of the IWT cabinet must have natural and artificial lighting in accordance with SanPiN 2.2.2.542-96.

2. The main stream of natural light should be on the left. The orientation of window openings should be north or northeast. It is not allowed to direct the main luminous flux of natural light behind and in front of the PC operating. With double-sided lighting at a depth of more than 6 m in the cabinet, a right-sided lighting device is required, the height of which must be at least 2.2 m from the floor.

3. In the lighting installations of the IWT cabinet, a general lighting system should be used, made by ceiling or pendant fluorescent lamps, evenly spaced along the ceiling in rows in the form of solid lines on both sides of the desktop with a PC or VDT. Lamps, as well as window light apertures, should not be reflected on the screens of a PC or VDT.

4. The illumination of the surface of student tables under artificial lighting should be in the range of 300-500 lux. Luminaires must have light-scattering fittings.

5. As light sources, it is recommended to use 40W, 58W fluorescent lamps or 36W energy-saving lamps of the LB, LHB type as the most efficient and acceptable in terms of spectral composition.

6. 6. For classrooms with PCs and VDTs, lamps of the LP036 series with high-frequency ballasts (VChPRA) should be used. It is possible to allow the use of luminaires without VChPRA in the "oblique light" modification.

7. In rooms with a PC, due to air pollution by anthropogenic organic substances and carbon dioxide, it is recommended to have supply and exhaust ventilation that provides optimal temperature and humidity conditions for all climatic zones. Optimal parameters Permissible parameters Temperature, C Relative humidity, % Temperature, C Relative humidity, % 19 62 18 39 20 58 22 31 21 55 - -

8. In the absence of supply and exhaust ventilation, air conditioning can be arranged using household air conditioners. Calculation of air conditioners should be carried out by a ventilation engineer depending on their performance, the amount of excess heat from cars, people, solar radiation and artificial lighting sources.

9. The IWT office should be equipped with a washbasin with hot and cold water supply.

10. The power supply of the cabinet must be carried out in accordance with the requirements of GOST 28139-89 and PUE.

11. The supply of electrical voltage to the tables of students and teachers must be stationary and hidden.

12. The location of the electrical panel and the Residual Current Device should give the teacher the ability to instantly turn off the power supply system. Recommended placement is to the left or right of the chalkboard.

13. To ensure fire safety, the office of the MBT must be equipped with 2 carbon dioxide fire extinguishers (type OU-2).

14. For painting walls and panels, light colors of paints should be used (p = 0.5-0.6). The composition of the paints must exclude the occurrence of lime dust.

15. The surfaces of the enclosing structures of the cabinet, blackboard, desktops should be matte.

16. The office of informatics and computer technology (MWT) is organized as an educational unit of a secondary general education and vocational school, a training and production plant, equipped with a set of educational computer equipment (KUVT), teaching and visual aids, educational equipment, furniture, office equipment and devices for conducting theoretical and practical, classroom, extra-curricular activities in the course "Fundamentals of Informatics and Computer Engineering" (OIVT), both basic and specialized. In addition, KIVT can be used in teaching various subjects, labor training.

17. The area of ​​the premises of the IWT office is determined in accordance with the requirements of the regulatory document "Educational and material base of an educational institution of general secondary education" part I. "Norms and requirements for educational buildings and school plots", as well as SanPiN 2.2.2.542-96.

18. Placement of KIVT in all educational institutions in the basement and basement is not allowed.

19. The minimum area per one PC must be at least 6 sq.m., and the volume - at least 24.0 cubic meters. with a height of at least 4 m. With a lower height of the training room, it is recommended to increase the area by one workplace.

20. At the office of IWT, a laboratory area of ​​at least 18 sq.m. should be organized. The laboratory room should have two exits: to the training room and to the landing or to recreation.

21. 2.10.2.6. The area of ​​​​the office should allow you to arrange furniture in it in compliance with sanitary and hygienic standards.

22. The front wall of the KIVT is equipped with a blackboard for felt-tip pens, a screen, a cabinet for storing visual aids and information media. 2.10.2.8. At the entrance to the IWT office, built-in or wall-mounted cabinets (shelves) for briefcases should be provided.

23. To the left of the blackboard, in the teacher's working area, an electrical switchboard with a control panel for power supply to the workplaces of the teacher and students should be fixed on the wall.

24. Drawers for tables are installed under the board or separately under the stands. Holders (or a bar with holders) are attached to the upper edge of the board for hanging tables.

25. On the wall opposite the windows, exposition boards with permanent and temporary information are placed.

26. Along the back wall, it is possible to install a sectional cabinet for storing educational equipment and information media, depending on the area of ​​​​the office.

27. The upper part of the back wall of the classroom should be designed to display the manuals necessary for studying individual topics of the program.

Requirements for a set of furniture in the classroom

1. The laboratory room should have the following furniture: radio editing table, office desk; shelving for storage of tools and a safe.

2. Furniture for organizing a teacher's workplace should include a table with a place for equipment (graphic projector) and a computer, a cabinet for a printer, a chair, and a blackboard.

3. Furniture for the organization of students' workplaces includes single student desks for a computer (GOST 11015-93) with chairs of different height groups No. 4,5,6) with color marking with lifting and swivel chairs.

4. Furniture for the rational placement and storage of educational equipment should consist of a combined cabinet in accordance with GOST 18666-95.

Requirements for the organization, jobs of teachers and students

1. The teacher's workplace is located on the podium and is equipped with a table equipped with equipment in accordance with the Lists, two cabinets (for a printer and a graph projector), a blackboard, a screen and an electrical switchboard with a control panel. The teacher's table must be supplied with power to connect a PC, printer, graph projector.

2. Dimensions of the teacher's table: cover length - not less than 1300 mm, mm, width - not less than 700 mm.

3. The pedestals should have 1-2 drawers with dimensions of 350x500x100 mm for accessories, magnetic media and banners based on the current day of classes.

4. For the MBT office, it is recommended to use a blackboard designed for writing with a felt-tip pen.

5. Workplaces of students equipped with personal computers (PCs) should consist of a single table and a lifting and swivel chair. In addition, the computer science room is equipped with double student tables (GOST 11015-93) in accordance with the number of workplaces of students when working on a PC or VDT. Student tables are located in the center and are designed for theoretical classes. Tables and chairs must be of different height groups with color indication. Furniture group Chair seat front edge height, mm Height group, mm Marking color Table height, mm 4 380 1460 to 1600 Red 640 5 420 1600 to 1750 Green 700 6 460 1750 to 1800 Blue 760

6. The modular dimensions of the working surface of the table for VDT and PC, on the basis of which the design dimensions should be calculated, should be considered: width - 800, 1000, 1200, 1400 mm, depth - 800 and 1000 mm with its unregulated height equal to 725 mm.

7. The student's desk must be connected to the power supply and the LAN cable. The table must be anchored to the floor.

8. The arrangement of workplaces for students in KIVT should provide free access for students and teachers during the lesson to the workplace.

9. To ensure the safety of students and teachers, electrical safety and the creation of constant levels of illumination during work, a perimeter arrangement of desktops with a PC is recommended (row arrangement of student tables with a PC or VDT is not recommended.

10. With the perimeter arrangement of workplaces, the following distances must be observed: a) along the width of the office: - the distance between the wall with window openings and tables should be at least 0.8 m; - the distance between the wall opposite the window openings and tables with a PC should be about 0 , 1 m, and in some cases, depending on the video monitors used, the tables can be installed directly against the wall; b) along the length of the KIVT, tables with a PC can be placed without breaking and with a distance between them.

11. When tables with PCs are arranged in rows, each table must have a protective screen on the back of the video monitor. The screen is attached to the table at a distance of 3-5 cm, its area should be sufficient to protect the power wires. 2.10.4.12. The number of jobs for students can be 9, 12, 15, depending on the class size.

Requirements for equipping the office with equipment and devices.

1. The number of student PCs required to equip the ICT room should be at the rate of one computer per student, taking into account the division of the class into two groups.

2. The IWT cabinet should include one machine for the teacher with appropriate peripheral equipment.

3. The IWT cabinet must be equipped with a graphic projector, a video recorder, a TV set (diagonal not less than 61 cm), a slide projector and a screen.

4. The demonstration TV is mounted 1.5 m from the floor on a bracket to the left of the blackboard.

5. The graphic projector should be located on a pedestal next to the teacher's desk.

6. When demonstrating filmstrips and transparencies (with a screen width of 1.2-1.4 m), the distance from the screen to the first tables of students (for theoretical classes) should be at least 2.7 m, and to the last tables no more than 8.6 m. The height of the lower edge of the screen above the podium is at least 0.8 m. The optimal viewing area for television programs and videos is located at a distance of at least 2.7 m from the TV screen to the first double tables of students (during theoretical classes).

Requirements for equipping the classroom with educational equipment and necessary documentation.

1. The composition of educational equipment in the office of the MVT is determined by the "List of computer equipment, educational equipment, basic and applied software for computer science classrooms, classes with VDT and PC in educational institutions of the general secondary education system."

2. The ICT classroom should be equipped with: - educational software for the course "Fundamentals of Informatics and Computer Engineering", both basic and specialized; - tasks for implementing an individual approach to teaching, organizing independent work and exercises for students on computers; - a set of popular science , reference and methodological literature; - a journal of introductory and periodic safety briefings for students (recommended); - a journal for the use of a set of educational computer equipment at each workplace; - a journal of machine failure and their repair; - holders for demonstrating tables and stands for exhibiting works students; - an inventory book for accounting for the educational equipment available in the classroom, annual plans for the additional equipment of KIVT approved by the school principal; - pharmacy first aid; - fire extinguishing equipment.

3. In the IWT office there should be a card file of educational equipment indicating the storage locations.

Requirements for placement and storage of equipment

1. Educational equipment and aids should be placed and stored in a sectional cabinet located in the laboratory and having adjustable shelves and half-shelves, according to the sections of the program.

2. Demonstration aids and DIY equipment should be kept separate.

3. Discs with software should be stored in special small boxes, protected from dust and light, according to classes and sections of the program; the drawers are placed in the cabinet, and the places for storing disks in it are marked with inscriptions.

4. Tables should be stored in boxes under the blackboard or in special compartments according to sections of the program and classes, taking into account the dimensions.

5. Audiovisual aids should be stored on cabinet shelves, filmstrips and transparencies - in stacks with recesses for boxes. Cells and boxes must be labeled.

6. Reference, educational and methodical and popular scientific literature should be stored on the shelves of the cabinet.

Requirements for the interior design of the office of informatics and computer technology

1. The manuals necessary for the study of individual topics, sections of the course, should be exhibited on the wall of the office, opposite the blackboard.

2. For the exposition of books and materials, the cabinet should be equipped with removable stands.

3. On the wall opposite the windows, boards are placed with reference tables permanently located in the classroom, acquainting students with safety regulations, the main computer components and their functions.

4. On one of the walls, along with the stands, a table "Rules for the work of students on a PC and VDT" should be placed.

5. Different fonts can be used in the design of stands: printed and handwritten, Arabic and Gothic. Headings and subheadings should be in the same style.

2.10. Cabinet of Informatics and Computer Engineering (IVT)
2.10.1. Sanitary and hygienic requirements

2.10.1.1. The premises of the IWT cabinet must have natural and artificial lighting in accordance with SanPiN 2.2.2.542-96.

2.10.1.2. The main stream of natural light should be on the left. The orientation of window openings should be north or northeast. It is not allowed to direct the main luminous flux of natural light behind and in front of the PC operating. With double-sided lighting at a depth of more than 6 m in the cabinet, a right-sided lighting device is required, the height of which must be at least 2.2 m from the floor.

2.10.1.3. In the lighting installations of the IWT cabinet, a general lighting system should be used, made by ceiling or pendant fluorescent lamps, evenly spaced along the ceiling in rows in the form of solid lines on both sides of the desktop with a PC or VDT. Lamps, as well as window light apertures, should not be reflected on the screens of a PC or VDT.

2.10.1.4. The illumination of the surface of student tables under artificial lighting should be in the range of 300-500 lux. Luminaires must have light-scattering fittings.

2.10.1.6. For classrooms with PCs and VDTs, lamps of the LP036 series with high-frequency ballasts (VChPRA) should be used. It is possible to allow the use of luminaires without VChPRA in the "oblique light" modification.

2.10.1.7. In rooms with a PC, due to air pollution by anthropogenic organic substances and carbon dioxide, it is recommended to have supply and exhaust ventilation that provides optimal temperature and humidity conditions for all climatic zones.

Optimal parameters

Valid parameters

Temperature, C

Relative humidity, %

Temperature, C

Relative humidity, %

2.10.1.8. In the absence of supply and exhaust ventilation, air conditioning can be arranged using household air conditioners.

Calculation of air conditioners should be carried out by a ventilation engineer depending on their performance, the amount of excess heat from cars, people, solar radiation and artificial lighting sources.

2.10.1.9. The IWT office should be equipped with a washbasin with hot and cold water supply.

2.10.1.10. The power supply of the cabinet must be carried out in accordance with the requirements of GOST 28139-89 and PUE.

2.10.1.11. The supply of electrical voltage to the tables of students and teachers must be stationary and hidden.

2.10.1.12. The location of the electrical panel and the Residual Current Device should give the teacher the ability to instantly turn off the power supply system. Recommended placement is to the left or right of the chalkboard.

2.10.1.13. To ensure fire safety, the office of the MBT must be equipped with 2 carbon dioxide fire extinguishers (type OU-2).

2.10.1.14. For painting walls and panels, light colors of paints should be used (p = 0.5-0.6). The composition of the paints must exclude the occurrence of lime dust.

2.10.1.15. The surfaces of the enclosing structures of the cabinet, blackboard, desktops should be matte.

2.10.1.16. The surface of the floor must be smooth, without potholes, non-slip, easy to clean and wet cleaning, and have antistatic properties.

2.10.1.17. The content of harmful chemicals in indoor air using video display terminals (VDTs) and personal electronic computers (PCs) should not exceed the average daily concentrations for atmospheric air.

2.10.1.18. For interior decoration of the interior of premises with PCs and VDTs, it is not allowed to use synthetic materials that emit harmful chemicals and compounds into the air. These include chipboard, laminated paper plastic, washable wallpaper, rolled synthetic coatings, etc.

2.10.1.19. The noise level at the workplace in all classrooms with VDT and PC should not exceed 50 dBA. (Sanitary norms for permissible noise in the premises of residential and public buildings and on the territory of residential development N 3077-84, clause 7.2).

2.10.2. Requirements for the premises of the ICT office

2.10.2.1. The office of informatics and computer technology (MWT) is organized as an educational unit of a secondary general education and vocational school, a training and production plant, equipped with a set of educational computer equipment (KUVT), teaching and visual aids, educational equipment, furniture, office equipment and devices for conducting theoretical and practical, classroom, extra-curricular activities in the course "Fundamentals of Informatics and Computer Engineering" (OIVT), both basic and specialized. In addition, KIVT can be used in teaching various subjects, labor training.

2.10.2.2. The area of ​​the premises of the IWT office is determined in accordance with the requirements of the regulatory document "Educational and material base of an educational institution of general secondary education" part I. "Norms and requirements for educational buildings and school plots", as well as SanPiN 2.2.2.542-96.

2.10.2.3. Placement of KIVT in all educational institutions in the basement and basement is not allowed.

2.10.2.4. The minimum area per one PC must be at least 6 sq.m., and the volume - at least 24.0 cubic meters. with a height of at least 4 m. With a lower height of the training room, it is recommended to increase the area by one workplace.

2.10. 2. 5. At the office of IWT, a laboratory area of ​​at least 18 sq.m. should be organized. The laboratory room should have two exits: to the training room and to the landing or to recreation.

2.10.2.6. The area of ​​​​the office should allow you to arrange furniture in it in compliance with sanitary and hygienic standards.

2.10.2.7. The front wall of the KIVT is equipped with a blackboard for felt-tip pens, a screen, a cabinet for storing visual aids and information media.

2.10.2.8. At the entrance to the IWT office, built-in or wall-mounted cabinets (shelves) for briefcases should be provided.

2.10.2.9. To the left of the blackboard, in the teacher's working area, an electrical switchboard with a control panel for power supply to the workplaces of the teacher and students should be fixed on the wall.

2.10.2.10. Drawers for tables are installed under the board or separately under the stands. Holders (or a bar with holders) are attached to the upper edge of the board for hanging tables.

2.10.2.11. On the wall opposite the windows, exposition boards with permanent and temporary information are placed.

2.10.2.12. Along the back wall, it is possible to install a sectional cabinet for storing educational equipment and information media, depending on the area of ​​​​the office.

2.10.2.13. The upper part of the back wall of the classroom should be designed to display the manuals necessary for studying individual topics of the program.

2.10.3. Requirements for a set of furniture in the classroom

2.10.3.1. The office and the laboratory room must be equipped with a certain set of specialized furniture that meets the requirements of GOST 22046-89, which has a certificate of conformity with technical documentation and a hygiene certificate.

The office should have furniture for:

Organization of the teacher's workplace;

Organization of workplaces for students;

For rational placement and storage of teaching aids;

To organize the use of equipment.

2.10.3.2. The laboratory room should have the following furniture: radio editing table, office desk; shelving for storage of tools and a safe.

2.10.3.3. Furniture for organizing a teacher's workplace should include a table with a place for equipment (graphic projector) and a computer, a cabinet for a printer, a chair, and a blackboard.

2.10.3.4. Furniture for the organization of students' workplaces includes single student desks for a computer (GOST 11015-93) with chairs of different height groups No. 4,5,6) with color marking with lifting and swivel chairs.

2.10.3.5. Furniture for the rational placement and storage of educational equipment should consist of a combined cabinet in accordance with GOST 18666-95.

2.10.4. Requirements for the organization, jobs of teachers and students

2.10.4.1. The teacher's workplace is located on the podium and is equipped with a table equipped with equipment in accordance with the Lists, two cabinets (for a printer and a graph projector), a blackboard, a screen and an electrical switchboard with a control panel. The teacher's table must be supplied with power to connect a PC, printer, graph projector.

2.10.4.2. Dimensions of the teacher's table: cover length - not less than 1300 mm, mm, width - not less than 700 mm.

2.10.4.3. The pedestals should have 1-2 drawers with dimensions of 350x500x100 mm for accessories, magnetic media and banners based on the current day of classes.

2.10.4.5. Students' workplaces equipped with personal computers (PCs) should consist of a single table and a lifting and swivel chair.

Additionally, the computer science room is equipped with double student tables (GOST 11015-93) in accordance with the number of jobs for students when working on a PC or VDT. Student tables are located in the center and are designed for theoretical classes. Tables and chairs should be of different height groups with color indication.

Furniture group

Chair seat front edge height, mm

Growth group, mm

Marking color

Table height, mm

2.10.4.6. The modular dimensions of the working surface of the table for VDT and PC, on the basis of which the design dimensions should be calculated, should be considered: width - 800, 1000, 1200, 1400 mm, depth - 800 and 1000 mm with its unregulated height equal to 725 mm.

2.10.4.7. The student's desk must be connected to the power supply and the LAN cable. The table must be anchored to the floor.

2.10.4.8. The arrangement of workplaces for students in KIVT should provide free access for students and teachers during the lesson to the workplace.

2.10.4.9. To ensure the safety of students and teachers, electrical safety and the creation of constant levels of illumination during work, a perimeter arrangement of desktops with a PC is recommended (row arrangement of student tables with a PC or VDT is not recommended.

2.10.4.10. The following distances must be observed for the perimeter arrangement of workplaces:

a) by the width of the cabinet:

The distance between the wall with window openings and tables should be at least 0.8 m;

The distance between the wall opposite the window openings and the tables with a PC should be about 0.1 m, and in some cases, depending on the video monitors used, the tables can be installed directly against the wall;

b) along the length of the KIVT tables with a PC can be placed without a gap and with a distance between them.

2.10.4.11. When tables with PCs are arranged in rows, each table must have a protective screen on the back of the video monitor. The screen is attached to the table at a distance of 3-5 cm, its area should be sufficient to protect the power wires.

2.10.4.12. The number of jobs for students can be 9, 12, 15, depending on the class size.

2.10.5. Requirements for equipping the office with equipment and
fixtures.

2.10.5.1. The number of student PCs required to equip the ICT room should be at the rate of one computer per student, taking into account the division of the class into two groups.

2.10.5.2. The IWT cabinet should include one machine for the teacher with appropriate peripheral equipment.

2.10.5.3. The IWT cabinet must be equipped with a graphic projector, a video recorder, a TV set (diagonal not less than 61 cm), a slide projector and a screen.

2.10.5.4. The demonstration TV is mounted 1.5 m from the floor on a bracket to the left of the blackboard.

2.10.5.5. The graphic projector should be located on a pedestal next to the teacher's desk.

2.10.5.6. When demonstrating filmstrips and transparencies (with a screen width of 1.2-1.4 m), the distance from the screen to the first tables of students (for theoretical classes) should be at least 2.7 m, and to the last tables no more than 8.6 m.

The height of the lower edge of the screen above the podium is at least 0.8 m.

The optimal zone for watching TV shows and videos is located at a distance of at least 2.7 m from the TV screen to the first double tables of students (during theoretical classes).

2.10.6. Requirements for equipping the classroom with educational equipment and necessary documentation.

2.10.6.1. The composition of educational equipment in the office of the MVT is determined by the "List of computer equipment, educational equipment, basic and applied software for computer science classrooms, classes with VDT and PC in educational institutions of the general secondary education system."

2.10.6.2. The IT cabinet should be equipped with:

Educational software for the course "Fundamentals of Informatics and Computer Engineering", both basic and specialized;

Tasks for the implementation of an individual approach in teaching, organizing independent work and exercises for students on computers;

A set of popular science, reference and methodological literature;

Journal of introductory and periodic safety briefings for students (recommended);

Journal of the use of a set of educational computer equipment at each workplace;

Journal of machine failure and repair;

Holders for demonstrating tables and stands for exhibiting students' work;

An inventory book for accounting for the educational equipment available in the classroom, annual plans for the retrofitting of KIVT approved by the school principal;

pharmacy first aid;

Fire extinguishing equipment.

2.10.6.3. In the IWT office there should be a card file of educational equipment indicating the storage locations.

2.10.7. Requirements for placement and storage of equipment

2.10.7.1. Educational equipment and aids should be placed and stored in a sectional cabinet located in the laboratory and having adjustable shelves and half-shelves, according to the sections of the program.

2.10.7.2. Demonstration aids and DIY equipment should be kept separate.

2.10.7.3. Discs with software should be stored in special small boxes, protected from dust and light, according to classes and sections of the program; the drawers are placed in the cabinet, and the places for storing disks in it are marked with inscriptions.

2.10.7.4. Tables should be stored in boxes under the blackboard or in special compartments according to sections of the program and classes, taking into account the dimensions.

2.10.7.5. Audiovisual aids should be stored on cabinet shelves, filmstrips and transparencies - in stacks with recesses for boxes. Cells and boxes must be labeled.

2.10.7.6. Reference, educational and methodical and popular scientific literature should be stored on the shelves of the cabinet.

2.10.8. Requirements for the interior design of the office of informatics and computer technology

2.10.8.1. The manuals necessary for the study of individual topics, sections of the course, should be exhibited on the wall of the office, opposite the blackboard.

2.10.8.2. For the exposition of books and materials, the cabinet should be equipped with removable stands.

2.10.8.3. On the wall opposite the windows, boards are placed with reference tables permanently located in the classroom, acquainting students with safety regulations, the main computer components and their functions.

2.10.8.4. On one of the walls, along with the stands, a table "Rules for the work of students on a PC and VDT" should be placed.

2.10.8.5. Different fonts can be used in the design of stands: printed and handwritten, Arabic and Gothic. Headings and subheadings should be in the same style.