Drainage

A simple do-it-yourself shower in the country. How to make a summer shower for a summer residence with your own hands: tips for beginner gardeners

Summer shower- one of the significant buildings in the suburban area. How to equip a shower in the country with your own hands, having built a reliable and durable structure with a minimum of financial investment? Guided by the advice of the master, you can easily cope with the task.

In the hot months, the presence of a summer shower is one of the conditions for a comfortable stay in a suburban area. The shower gives you the opportunity to freshen up after a hard day, removing the accumulated fatigue and energizing for new things.

Summer shower of a simple layout at their summer cottage

There is nothing complicated in building a shower in the country with your own hands. You just need to sketch a drawing and decide on the size of the future structure, prepare necessary materials and take some free time.

Outdoor shower design

There are many options for arranging a summer shower. It might turn out simple design from wooden frame with a small tank on the roof and a curtain to keep out the wind and prying eyes. Or a full-fledged cabin with strong walls and a roof that can withstand a heavy barrel filled with water.

Summer shower design options

But in any case, an outdoor shower should be comfortable and spacious. Thinking over the dimensions of the future shower stall, keep in mind that it is necessary to provide a place protected from water splashes for storing bath accessories and hanging clothes. This will require from 40 to 60 cm of floor space.
According to the experience of the masters who have already built a shower in the country with their own hands, for a comfortable adoption of water procedures, there is a sufficient room with a size of 160x100 cm or 190x140 cm and a height of 2.5-5 meters.

Tip: A small drawing or a simple drawing will help you correctly calculate the required amount of building materials, preventing unnecessary costs.

Site selection

The design of the summer shower assumes that the water will be heated from solar heat. Therefore, it is better to allocate a well-lit area for the installation of a shower cabin, where the sun's rays will actively warm up the water tank throughout the daylight hours.

The best place to build a shower is a sunny place.

When choosing a place, it is worth considering the convenience of water supply, ensuring, if possible, automatic filling of the tank.
It would be wise to take care in advance about the flow of water by placing the structure on a natural elevation, or by making a small embankment for this so that after washing it enters the septic tank or sump.

Foundation preparation

When building a lightweight frame structure, laying the foundation is not at all necessary, but when building a stationary summer shower, this stage of work cannot be bypassed.
To carry out the work you will need:

Roulette and level;
Pegs and lace;
Bayonet shovel;
garden drill;
Pieces of roofing material;
Metal grid;
Crushed stone and sand;
cement mortar.

Preparing the base for the summer shower

The dimensions of the foundation depend on the building materials from which the building will be built. For the construction of a shower from cinder block or brick for arrangement slab foundation digging a pit about 15 cm deep will be required.
The work is carried out in several stages. Having decided on the place for arranging the summer shower, they prepare the site:

With the help of a tape measure, pegs and a cord, a site of the required size is marked out.
In the designated area, a layer of turf is removed with a depth of 15 cm.
Level the base of the pit.
The bottom of the pit is lined with a "cushion" of sand and poured with mortar, creating a flat surface.

Tip: If it is planned to use a wooden or metal frame as the floor of the shower room, before pouring the base, it is necessary to prepare a place for racks by installing sticks of the required diameter vertically wrapped with roofing felt.

Foundation laying

When performing a floor screed, it is better to use a level and guides, because only a horizontal surface can become a reliable basis for the entire structure. At this stage of construction, it is also worth taking care of arranging the drain, in parallel with the concrete tie, by completing a gutter reinforced with a metal mesh.

The foundation for the construction of a capital summer shower

Using a columnar or pile foundation for a frame summer shower, you do not have to dig a pit. It is enough to make holes about 1 meter deep using a garden drill at the place of installation of the support pillars.
They must be inserted metal racks, whose height is 1.2 m, and D \u003d 90 mm, so that the racks rise above the ground by 20 cm. Columns from hollow pipes fill cement mortar, diluted with crushed stone and sand in a ratio of 1: 5: 3 and wait until it acquires the necessary strength.

Important: To extend the life of metal poles, the ends buried in the ground must be pre-treated with used engine oil.

Drain arrangement

A septic tank for a summer shower is best placed not under the shower cabin, but at a short distance from it. This will prevent it from flooding with large volumes of water, thereby preventing the destruction of the foundation and soil.

For its arrangement, they dig a hole about 2 meters deep, decorating the walls with brick or cinder block masonry. Some craftsmen use car tires for this purpose, laying them on top of each other in the form of a well. A chute is brought to the finished septic tank to drain the water and covered with a shield knocked down from wooden boards.

Option for arranging a drain for a summer shower

It is better to arrange the walls of the gutter for water drainage with a waterproof material: roofing material, hydrostekloizol or ordinary PVC film. It is placed under a slope so that the drain is directed towards the drainage tank.
In the shower stall itself, a metal or enameled tray is installed, which can be purchased at any specialized store without much hassle. From it, water will flow directly into the gutter.

Tip: You can partially solve the issue of soil drainage by planting moisture-loving perennials near the shower stall, such as bathing suit, buzulnik, hazel grouse, iris, loosestrife.

Frame erection

A summer shower made of beams or boards is one of the most popular options for a building that is needed in the household. For the construction of the structure, it is better to use conifers, the main advantage of which is:

high density;
moisture resistance;
High resin content;
Ability to withstand heavy loads.

Beam shower frame

For the construction of the frame, bars of 100x100 mm are used. First, the lower frame is assembled, fixing it by means of a bolted connection to the support posts or screw piles. When mounting, it is better to use long bolts with full coincidence of the axes.

Having installed vertically wooden supports, perform the upper trim. To give the structure additional stability, the side frames are fixed with spacers.
Planed coniferous wood is excellent as a sheathing. It has a presentable appearance and harmoniously fits into the surrounding landscape.

Important: To prolong the life of wood, it is desirable to treat it with an antiseptic and water-repellent composition, or simply cover it with 1-2 layers of varnish for outdoor use.

Building the walls of a wooden summer shower

Special seals will help to ensure a snug fit of the door. The door to the booth also needs to be painted or proliferated.
For interior decoration booths can be used plastic panels, oilcloth or linoleum. Photo from interesting options designs can be viewed online.

Barrel installation

When choosing a barrel of the required volume, they are usually guided by the formula that up to 40 liters of water is enough for one person. To equip a summer shower for a family of three or four, it is enough to install a 200-liter barrel. If you choose between a plastic and metal container, then it is worth noting that plastic is lighter in weight, but metal (painted dark) heats up faster.

Different schemes for supplying water with natural heating

A little trick: To ensure faster heating of water, the outer surface of the roof under the barrel can be lined with reflective material such as galvanizing or foil.
The container is laid on the roof and fixed with straps. It remains only to choose the desired scheme for supplying water to the cabin:

cut two holes for filling with water and connecting a faucet with a diffuser, fill the container and enjoy water procedures.
the pedal scheme is similar to the first one, but water is supplied using a pedal and not a valve, as in the first case.

The second option is more complex, but at the same time very economical. water enters the shower dosed and at the right time, which is very convenient. Both options with natural water heating. It is also possible to connect electric water heating. The presence of an electric heater in a barrel entails the rejection of a barrel made of simple plastic (it is better to use metal) and the inclusion of another container for supplying cold water in the circuit.

Scheme for arranging a tank for a summer shower

Cold water will save a lot of electricity, because washing only with heated water is not very practical and convenient, because there is no way to adjust the temperature of the water supply. You will also need a mixer or some kind of circuit with two taps and the need for electricity supply. Although electricity is desirable anyway, it is necessary to light the shower.

Building a shower in the country: video

Naturally heated shower: video

Summer shower in the country: photo

It is unlikely that anyone will agree to deny themselves the pleasure of taking an outdoor shower, which allows them to refresh themselves at the end of a hard day's work. In this article we will tell you how to make a summer shower with your own hands from various materials(from polycarbonate, metal profile, brick, wood), we will show the exact dimensions, as well as provide photo and video instructions.

Such an approach to the manufacture of a shower structure will allow you to save on expensive materials, and, no less important, to make a structure that best suits your individual preferences.

Site selection and options

The place for the shower is chosen, as a rule, on open space, located at some elevation above the general level of a suburban area. Since solar energy is used to heat water in structures of this type, the place under them should not be located in the shade of trees and other high-rise objects.

It is known that summer showers of various architectures are traditionally built in our summer cottages (including quite a few original designs). In this case, all of them can be reduced to the following versions:

buildings of a light type without strong side walls;
lightweight structures equipped with improvised side walls;
capital shower houses with walls made of polycarbonate or similar material.

Consider each of the above embodiments in more detail.

Shower cubicle dimensions

Inside the shower cabin should be comfortable enough to easily bend over, turn around and stand freely. Therefore, you can build on these sizes:

Height 2–3 m.
Length 1.9 m.
Width 1.4 m.

These sizes are quite comfortable. Considering the thickness of the walls, the room will decrease slightly. At the same time, the shower cubicle itself will have an average size of 1 × 1, as well as a dressing room of 0.6 × 0.4 m.

From improvised materials

The simplest design of a shower made from improvised materials includes a tank with a tap built into it, a standard shower head and a regular watering hose. Such a simple structure is installed near the house, and the tank is mounted on the wall or roof of the building at a height slightly higher than human height.

The location of the tank should be chosen in such a way that the sun's rays linger on it for as long as possible during the day.

After fixing the collection tank, a valve cock is built into it, on which a hose of suitable length is put on with a shower head installed at its end.

The convenience of this option for a summer shower is that in this case you can do without arranging a separate shower stall. The main thing to pay attention to is to protect the wall and roof of the house well from the damaging effects of moisture that accumulates near the tank. To this end, the area of \u200b\u200bthe building in the area where the latter is located should be isolated with special water-repellent impregnations or simply covered with several layers of ordinary oilcloth.

Note that this embodiment has natural disadvantages, which are as follows:

the place of taking a shower in this case is completely unprotected from the wind;
a significant part of the daytime it will be in the shade of the house;
there is a threat of gradual destruction of the walls of the house from moisture accumulating in this place.

Taking into account all the above disadvantages, the use similar structures is usually limited.

The process of building a wooden summer shower consists of several successive steps. First of all, you need to prepare a place. It must be well ventilated, as under the influence of constant exposure to moisture, the structure can quickly become unusable. Next, you need to dig a hole 1 × 1 m and a depth of 0.4 m. You fill it with rubble. This must be done so that the soapy water does not spread over summer cottage, but managed to soak into the ground.

If you have organized a drain of sewage waste into a drain pit, then you skip this stage of preparation.

Sheathing frame clapboard.
Painting.
Tank installation.

Frame construction

Take boards with a section of 30 mm × 15 cm and make a 1 × 1 base. Attach 4 side beams to it, the section of which is 100 × 70 mm. They will serve as the basis for installing the tank. They must be installed in the grooves.

Frame sheathing

For sheathing the frame, you can use a false beam, blockhouse or lining. When mounting them, leave a gap of up to 3 mm between each bar. This also applies to the first at the base. In this case, under the influence of moisture, the product will be able to expand freely. If this is not taken into account, then the summer shower will turn into an "accordion".

Painting

When the plating is completed, you can start painting. To do this, the entire surface should be covered with antifungal impregnation. The next layer will be facade acrylic water-borne varnish. It is applied in 3 layers.

You should not save on varnish, so it is better to apply it in sufficient quantity. It is important to ensure that water slides easily over the surface of the walls and does not linger in the shower. Such painting is carried out both outside and inside.

Tank installation

To store water, you can install a tank of 100 liters. The tank can be made from different materials, stainless steel, plastic, etc. You can buy a ready-made tank just for this purpose. Some homeowners often find one or another container to install on an outdoor shower.

In conclusion, it remains to hang the curtain on the hooks. On average, such a shower can be built in 1-2 days.

Photo instructions for making a summer shower from wood

Another option for building a shower is to use polycarbonate. To build it, you will need to purchase the following building material:

Polycarbonate. The sheet size is 2.1 × 1.2 m. For arranging a shower, a thickness of 8–15 mm will be enough. As for the choice of color, then choose one that is less transparent milky or bronze.
For fastening, special hardware, tapes and corners will be required.
Frame material such as wood, metal angle or pipe, brick, aluminum profile, etc.
Shower tank.
Shower diffuser.
If necessary, a plastic pipe for the drain.

We have already discussed the general principle of constructing a frame for a summer shower made of wood above. Therefore, it is worth paying attention to some specific features in working with polycarbonate.

Any material, be it stone, wood or metal, can support the weight of polycarbonate. But there is one caveat. This material is distinguished by its windage, so the frame should be equipped with a sufficient number of cross-shaped, vertical and horizontal jumpers.

The thickness of the frame material for polycarbonate may be less than for wood.

Tank installation

The tank is mounted on an installed frame. Due to this, the water is heated in it by the sun's rays. Usually a flat tank is installed, but there are no strict rules here.

It is better to install a tank in a polycarbonate shower under the roof. Thus, there will be a greenhouse effect and the water will heat up much faster and cool down accordingly.

Installation of polycarbonate

If you want to make a locker room, you will need two sheets of polycarbonate. For walls, use opaque, and for the roof, use transparent, so the water will heat up faster. First of all, make blanks by cutting the sheets to the desired dimensions.

A polycarbonate sheet can be cut with an ordinary knife both along the voids and across.

Be sure to process the cut with sandpaper. Check for sawdust getting inside the comb. If yes, then they can be removed with a vacuum cleaner. To prevent chipping when drilling holes, step back from the edge of 3-4 cm. Drilling should be between the stiffeners. Be sure to cover the edges of the sheet with perforated tape. This is done so that debris, dust, water, etc. do not get inside the cells. As for the end part, use the end profile, H-shaped or angular.

To prevent condensation inside the honeycombs, drill thin holes in several places. Enough 3 holes per 1 m profile.

A photo

Video

In this video you will see how to make a wooden shower:

This video will talk about the possibility of a quick shower construction:

Schemes

Photo instruction of a summer shower on a plank base

Water treatments in the open air are very useful, so many adherents of relaxation and hardening decide to make a summer shower for a shower in the country with their own hands, or at least install a finished booth on the site. This article will help you understand the design features, choose the right size and installation location, draw up a preliminary diagram and complete all stages of construction without errors.

Types of autonomous toilets. Choosing a place for building a toilet in a summer cottage

If it is planned to build a capital shower for a do-it-yourself brick cottage, it is advisable to use a strip type of foundation. A trench is formed along the perimeter of the future building. The optimal depth is 0.5 m. Next, the formwork is installed. At the bottom of the trench, it is necessary to form a sand-gravel cushion with a thickness of 0.1 m. After that, reinforcement is laid and concrete is poured. This must be done so that in finished form the foundation rises above ground level by about 0.1 m.

When the base is completely hardened and dry, it will be possible to begin the construction of the sewer system.

How to organize a drain system in the shower in the country with your own hands

There are several ways to organize a waste system in a shower stall. The choice of construction technology depends on several factors:

type of soil on the site;
type of foundation;
the number of people living in the house.

If as a foundation for a summer shower in the country house is used monolithic slab, then before filling it is necessary to lay the system plastic pipes with knee. The plate is formed in such a way that on all sides there is a slope towards the drain hole. Sewage pipe is displayed outside the shower room and connected to a common drain system. You can bring the drainage to the drainage well.

Useful advice! For the construction of a similar sewer for a booth installed on a different type of foundation, it is not necessary to fill the floors with concrete. It is enough to buy a summer shower for giving with a pallet made of acrylic. This element will serve as the floor.

With connection to the sewer system - best option for big family, since the pit will not be able to accommodate the volume of wastewater that will be formed during operation. If the design is designed for 1-2 people, it will be enough to drain directly under the booth. But this type of system is suitable for areas with a loose type of soil, when the shower is installed on a columnar or pile foundation. This option can also be used on a tape base.

First you need to remove a layer of soil with a depth of 0.5 m. The formed depression is filled with gravel or stone to half its height. The rest is covered with crushed stone with a fine fraction. After the cabin structure is assembled, a pallet made in the form of a wooden lattice is installed on a layer of rubble. The system is designed in such a way that wastewater passes through the drainage layers and gradually soaks into the soil.

Sometimes the owners of summer cottages bring the sewer into the garden, which cannot be called a good solution. If you still resort to a similar method, it is desirable that the place where the water drains is well warmed by the sun. Otherwise, the liquid will accumulate, and a swamp full of mosquitoes will form around the shower.

Making a cabin for a summer shower: photo and construction technology

For the construction of a cabin for a homemade shower, any available materials can be used.

Suitable for these purposes:

wood;
polycarbonate;
corrugated board;
brick.

Each type of material has its own advantages, features and properties.

How to build a shower in the country with your own hands: economy cabin

There is a little trick that will help you achieve savings in the process of building a shower house. To reduce costs, it is enough to use one of the blank walls of the building as a side for a booth.

Before you build a budget-type summer shower, you need to fix a small water tank equipped with a watering can on the wall. Here you can also install elements related to comfort, for example, hooks for clothes, shelves, etc. At the top of the future structure is a partition. It is fixed on the wall of the building. As front door a tarpaulin or film (necessarily opaque) can be used. The curtain is suspended with rings.

The floor is arranged so that the drains are diverted as far as possible from the foundation part of the house. To do this, a platform is concreted or you can get by with installing a pallet made of acrylic.

Useful advice! If you use the inner corner of the building, which has an L-shape, you can generally avoid the construction of the sides of the booth. Their function will be performed by the walls of the building.

Building a wooden cabin for a country shower with your own hands

The most common option country shower- cabin, made in the form wooden house. This type of building is considered one of the most affordable. Wood is easy to process. At the same time, it perfectly retains heat, which is a definite advantage if the shower is to be used in cold weather.

To build a summer shower in a private house with your own hands, it is advisable to use wooden beam. For the manufacture of corner posts of the booth, a material with a section size of 10x10 cm is required. A tank for 200 liters of water is installed in the upper part of the shower, so the beam must be thick enough to withstand such a weight load.

To hang the door, you will need to install two additional racks in front of the booth. These elements are placed between the corner posts. For their manufacture, you can take a bar with a section size of 5x5 cm.

To form a small slope angle for shed roof booths, it is recommended to install the front corner posts 0.2 m higher than the rear ones. This is not required if a square-shaped tank is used as a container. In this case, the racks are mounted on the same level.

All supports are attached to the wooden frame of the lower trim. For fixing it is necessary to use hardware and metal corners. At the top of the structure, strapping is done in a similar way. You can use spacers to secure the racks more firmly. On the upper trim of the frame part of the booth, a basis for mounting the container is formed. In this case, you need to read not only the size, but also the shape of the tank.

For sheathing the frame part of the building, you can use a board 2 cm thick. This material is also suitable for making a door. It is necessary to lay the boards in one row and knock them together with the help of two jumpers. To prevent the door from skewing, the structure can be strengthened obliquely using a long rail. The door frame for a country summer shower is made of boards, the thickness of which is 4 cm. It is recommended to use self-tapping screws as fasteners.

When the booth is completely ready, it can be opened with a colored varnish composition. FROM inside the entrance is curtained with a film, otherwise the doors will swell from moisture.

Useful advice! Often, a large barrel for a shower in the country is used for construction. By installing a watering can over the structure, you can get a budget option wooden cabin.

Polycarbonate garden shower technology

Since wood is subject to deformation changes under the influence of moisture, many site owners are thinking about how to make a shower in the country with their own hands from more practical and resistant materials such as polycarbonate. The frame part of the cabin is made in the same way as in the case of a wooden shower, however, a metal profile must be used as the material. Optimal size section - 4x6 cm.

The frame part of the cabin is formed with the help of racks and jumpers between them. In this case, metal elements are used, so a welding machine is required to fasten them. Moreover, the assembly order can be performed in several ways. In the first case, the frame part is welded separately, after which it is installed on the base and fastened with anchor bolts. The second method involves concreting racks during the pouring of the foundation. Then the strapping is formed, spacers are attached.

It is desirable to use as a covering for a shower made of polycarbonate sheet material 1 cm thick. metal frame it is fixed with the help of hardware, which must necessarily have sealing gaskets.

Installation of the tank and features of the construction of a shower in a country house with heating by one's own hands

At the last stage of the construction of the shower, a tank is installed. The container can be made independently using any container made of stainless steel or plastic. To do this, it is necessary to form a hole in the bottom, the diameter of which is 1.5 cm. A pipe segment with a thread on both sides is attached to it with the help of nuts. The length of this element should be 30 cm.

In the roof of the booth in the center, you need to make a hole where the pipe will be inserted. After installing the tank, a tap and a watering can made of plastic are screwed onto the free end. Then the container is firmly fixed on the frame of the frame part of the booth, filled with water and covered with a lid.

To create a summer shower with heating for a summer residence, it is enough to install a heating element in the tank. Of course, the natural energy of the sun can be used to heat water. In this case, there will be no electricity costs. However, the sun's rays are not able to heat a large volume of liquid. In addition, not every region has the necessary climatic conditions.

On the network you can find many schemes necessary for connecting a summer shower for a heated cottage to electricity. The advantage of these devices is that the water warms up in the tank quickly enough, regardless of the time of day and the weather outside. At the same time, a person can adjust temperature regime. If you attach a piece of foam to the hose, the warmest water will flow into the watering can. For the same reason, liquid is taken from the upper zone of the tank.

Useful advice! To speed up the process of heating the liquid, you can add a coil to the circuit.

Is it possible to buy a summer shower for a summer residence inexpensively: prices for finished structures

To simplify the construction technology, you can buy a ready-made summer shower and install it on a prepared base. The cost of cabins is varied and depends on various factors.

The following points affect the price of products:

material of manufacture;
modification (presence of a locker room);
the shape of the water tank (in the form of a barrel, a square tank);
complete set (availability heating element, tank, temperature sensor etc.);
tank capacity;

the material from which the water tank is made.

Average prices for finished structures

Name	price, rub.
Metal frame and PVC fabric
garden shower
Garden shower with water heater
Garden shower with water heater and dressing room
Polycarbonate construction

Cabin with 130 l tank
Cabin with 200 l tank
Cabin with 130 l tank with heating

A wide variety of materials suitable for construction, as well as manufacturing technologies, allows any summer resident to acquire a comfortable and convenient shower in the country. Moreover, you can make a booth yourself from improvised means or purchase it ready-made in a specialized store.

This will require skills in installing plumbing and laying tiles. But even a novice builder will cope with a simple shower on a finished pallet. The main thing is to correctly assess your capabilities.

Of course, it is much easier to plan a future shower room in a house under construction. In this case, the fantasy is almost unlimited:

construction of a shower room with an inclined floor;
device "recessed" in the floor of the pallet;
installation of a monolithic pallet with a side;
installation of the finished pallet;
connection of a modern shower cabin.

So, to organize an inclined floor, even at the construction stage, its level must be made at least 10-15 cm lower than the floors in other rooms. The same applies to a shower with a tray, the edges of which are located at floor level - so that you do not have to make a threshold in the bathroom.

If you need to re-equip the shower room in finished house, and there is no way to dismantle the floors, you will have to limit yourself to only the last three “floor” options. Their advantage is undoubted - such a shower can be made with your own hands, even without professional skills.

Features of piping in the shower

The second method is much more complicated - first, water enters the collector, and separate pipes already depart from it to each object - a sink, shower, toilet bowl and other appliances. At the same time, the problem of pressure drop is solved with the simultaneous inclusion of several points of water intake.

Without special skills, it will not work to make the collector system correctly, therefore, in do-it-yourself houses, they use a serial connection. And so that boiling water does not pour out of the shower when filling washing machine, it is enough to use pipes of different diameters - 3/4 "for a common pipe and 1/2" for connecting devices.

One more important point- organization of drain from the shower. When choosing a siphon, you need to decide in advance:

When choosing a place for a shower, the distance of the sewer connection is important - if it is more than 3 m, you will have to deaerate to remove the air coming with the water.

Waterproofing and ventilation of the shower - what to look for

The organization of the shower even in wooden house no problem thanks modern materials and solutions. So, you can level and protect the walls with moisture-resistant drywall with mandatory sizing and puttying of the joints. Sheets should not reach 0.5-1 cm to the floor. If the walls are concrete or brick, you can immediately start finishing them.

The waterproofing is already applied to the screed and should cover the entire floor with a minimum of 15 cm on the walls. The walls in contact with the shower are also covered with waterproofing.

It can be both mastic and built-up roofing material. Special attention should be paid to the exit points of pipes and electrical appliances. At the junction of walls and floor, as well as at the corners, it is additionally glued sealing tape, the edges of which are also rubbed with mastic.

But proper organization shower waterproofing is only half the battle. Constant high humidity, even if it does not affect facing material, can ruin the most modern bathroom. That's why forced ventilation should be considered at the planning stage.

The direction of air in the ventilation shaft, if it also affects living rooms, should be from “dry” rooms to “wet” ones - bathroom and kitchen. Otherwise, constant dampness in the bedroom will be ensured. At the same time, it is advisable to do the hood even if there is a window - in the cold season it is hardly rational to constantly ventilate the shower room.

Shower with a ready-made tray - a simple and aesthetic solution

Installation of the pallet is extremely simple - just follow the instructions. Steel and acrylic pallets, in most cases, are equipped with special legs. But even in this case, it is better to put the pallet on a monolithic base with a support in the center - so that it does not bend or move.

The installation process includes five steps:

To simplify installation, instead of mounting glass screens, you can attach a curtain bracket. To give the shower originality, you can use non-standard brackets - oval, semicircular or even spiral.

How to make a shower without a pallet

A shower without a tray looks very stylish. Such a shower in the house is convenient for children and the elderly, as well as for bathing pets. The absence of a border is compensated by the correct slope for draining the water, so you do not have to worry about the complete flooding of the bathroom.

The process of organizing such a shower is also quite simple, although it takes a lot of time:

In order not to double-screed the entire floor, you can make a shower with a border. To do this, bricks are laid along the desired contour, and the whole process is repeated, but only in the space limited by the curb.

How to make a shower with such a pallet with your own hands is very intelligibly shown in the video:

During the summer, dacha owners have to spend a lot of time in their gardens. And working on the ground is not only an opportunity to get in touch with nature and grow environmentally friendly, “homemade” products, but also hard physical labor, after which you want to relax and take a shower.

The main disadvantage of many country houses is their lack of well-being. Housing for seasonal living often has neither water nor running water. It is impossible to take a shower in such conditions, so the best way out of the situation is to build an appropriate structure on the street, where you can hastily equip a temporary hut, or spend a little time building a beautiful wooden structure with one or two sections (it can be a shower and a dressing room, or a shower and a utility block).

The undoubted advantages of such a wooden structure include:

aesthetic appearance;
environmental safety;
warmth (the material is pleasant to the touch, and you can stand barefoot on the floor for a long time);
ease of installation;
relatively low cost (especially for assembly from improvised materials - timber and boards left over from previous construction work are used).

The obvious disadvantages are:

dependence of water heating on the weather (for example, rain will not allow you to take a shower);
the unsuitability of the building for use in the cold season, when garden work is still underway.

For construction good shower on average, it takes only two to three days of work.

Of course, the owners need to have the skills of a joiner and carpenter, be able to draw up a plan and have general ideas about plumbing. If there is no opportunity or skill for self construction, a good choice could be to purchase a ready-made street. It will cost more than building materials, but it will reduce installation time.

Main types

Exists several common design options such a country house. Each owner can choose the one that seems to him the most acceptable (or easy to assemble):

The rack is the simplest open structure, which includes only two walls and plumbing fixtures mounted on one of the walls.
Panel - the design involves attaching plumbing fixtures (watering cans and taps) directly to the wall of the house or fence. Instead of walls, a curtain made of opaque polyethylene is used.
A separate room in an already finished building - this design requires competent disposal of water and steam. A house can be used as the main structure, or a clean outbuilding(part of it).
A full-fledged cabin is the best option that allows you to take into account the features of the relief and turn the shower into a real decoration of the yard or garden, which organically complements the design. Cabins can have one or two sections. The two-section building is very practical! Under one roof, in addition to the shower room, it can accommodate: a utility block with tools, or a comfortable locker room.

In fact, only the last option in the form of a separate booth can be considered a full-fledged wooden shower for a summer residence. It is this design that many owners of summer cottages seek to bring to life.

What is taken into account during construction?

Design features are largely determined technical requirements to the shower:

the dimensions of the structure are selected taking into account the largest member of the family (its growth is especially important);
location must be in line with technical standards(for solar heating of water, opening areas are selected, and a shower with electric heating elements can be installed in any convenient place);
the frame is calculated taking into account the mass and size of the tank (it takes up to 40 liters of water per person, plus a supply of 20-25 liters) - the whole structure must withstand being filled.

It must be remembered that showers are open and closed (with a door and solid walls). They have natural heating of water in the tank from sunlight or use forced heating through electric heating elements. They are built with one section or two or three sectional ones. These technical points also affect the appearance of the building.

A typical shower structure consists of the following basic elements:

floors with built-in drain;
cases with a door (framework);
plumbing fixtures (faucets and watering cans);
tank or barrel for water (installed on the roof).

However, with a lack of funds or unwillingness (inability) to engage in construction work, no one forbids the owners to get by with a rack or panel. Such a solution to the issue is relevant if the area allows you to hide from prying eyes and calmly take a shower.

How to choose a design?

In choise appearance the owners have no restrictions on the shower building. It can be different finishes and stylization (for example, under the Russian teremok), different arrangement on the site (separately, next to the pool, house or other building), the presence or absence of a door (windows, roofs, solid walls - often only circular curtains are used).

There are buildings that include additional sections, or have an open terrace for relaxation. Some homeowners decorate shower walls with hanging flower pots or paint them bright, juicy colors. Everything in design depends on the imagination and wishes of the owners! The main thing is that the building fits into the general view of the yard or garden.

How to build?

On the initial stage the owners need to draw up a plan for the future building, determining its size and location.

Here are a few wood summer shower projects:

According to the exact plan, it will be easier to calculate the required amount of building materials. For the base of the frame and the floor, a beam is used, the walls and floor are sheathed with boards. The door is made from the same material. The foundation requires pipes with a diameter of 9 centimeters, which serve as the basis for the pile structure.

We equip the sewer system

The most important element of the design is. It is with the provision of the removal of used water that construction begins. Moreover, you can also use the existing one, if it is available on the site. If there is a drain pit or not, it is necessary to equip a septic structure from. For work you will need:

five to seven old tires;
wire for strengthening the structure;
boards or a finished manhole cover.

The pit is dug two or three meters from the shower. It is not recommended to place it directly under the building! This can lead to appearance in the shower bad smell or erosion of the foundation. At the bottom of the pit, to ensure slow water filtration, sand and crushed stone (at least 50 cm) are poured into the soil, and then tires fastened together are installed. Water is drained through a plastic pipe buried in the soil or through a gutter. To do this, a hole of a suitable size is cut in the top tire.

We build the foundation

The foundation is a structure on piles. Four pipes with a diameter of 9 centimeters are concreted at the corners of the future building. Each of them rises above the ground by 15-20 centimeters. Studs are welded to the top of the pipes. The ground under the building is covered with several layers of roofing material, giving this kind of pallet a slope towards the drain pipe or gutter. You can also make a pallet made of concrete.

The lower strapping is made of a bar measuring 10 by 10 centimeters. The structure is attached to the piles with the help of nuts and a stud already present on each pipe. Between themselves, the bars are pulled together with self-tapping screws and fastened to the lock. To prevent rotting, the strapping is lubricated with used engine oil!

We install the frame, floor and roof

A frame is installed on the base, it is also made of bars. At the top, side posts and racks forming doorway, tied with an upper dressing, also made of timber.

The floor is made of boards 1.5-2 cm thick. A small gap is left between the boards - such a lattice structure does not prevent a person from standing and provides free flow of water.

The walls are sheathed on the outside with boards, tightening the structure with self-tapping screws. At the top, between the roof and the ceiling, gaps of 20-30 centimeters remain - they play the role of ventilation windows and at the same time let daylight into the cabin.

Top cover they are made of boards, but only two beams can be laid and fixed with screws, which serve as the basis for a water tank. All Recommended wooden details structures pre-coated with drying oil. This material will serve as a primer for paint and prevent water absorption.

We supply a shower tank

A barrel made of plastic or metal is used as the main container.

It is desirable to cover it with dark paint for better heating of water in the sun.

The optimal capacity is from 100 to 200 liters. Optionally, the roof can be covered galvanized metal or lay foil under the barrel - the sun's rays will be reflected from the polished surface and absorbed by the walls of the barrel, thereby accelerating the process of heating water.

A plastic or metal pipe with a tap and a watering can is mounted to the tank. To do this, a suitable hole is cut or drilled in the bottom of the barrel, through which a pipe with an external thread at the end is passed. Fitted top and bottom rubber seals and then the pipe is tightened with a nut. The tap (valve) is installed using a tee, to the lower end of which a watering can is attached with or without a hose (depending on the wishes of the owner).

Door installation

At the final stage, the door is installed. Loops are used for fastening. Additionally, you can install an internal deadbolt and an external hook. Inside the cabin is equipped with hooks for towels and a hanging soap dish. On this construction works considered completed.