13339 0 7

How to make a rocking chair from plywood with your own hands - drawings and assembly instruction attached

A comfortable and beautiful rocking chair made of wood in a store is not cheap. However, it is not necessary to buy such furniture, because everything can be done with your own hands. Read in this article about how to make reliable and inexpensive furniture from plywood for a comfortable stay.

Advantages of a homemade plywood rocking chair

The use of plywood as the main material for furniture assembly guarantees the following advantages:

• Making furniture with curvilinear shapes. Plywood, unlike solid wood, can be bent in different directions, giving products complex curvilinear shapes.
• Ease of manufacture. Most plywood furniture can be made by hand using readily available tools from the home workshop.
• Affordable cost. Finished products will cost less than similar, but solid wood products.
• Great look. Plywood is glued from veneer with a solid pattern, and therefore the finished furniture looks no worse, and sometimes even better, than similar products completely assembled from wood.
• Strength and durability. Due to the special arrangement of the veneer in the board, plywood exhibits higher fracture strength compared to similar indicators of solid wood.
• Environmental Safety. Multilayer plywood is a product made from natural raw materials - wood, and therefore this material is safe for humans.

Types of rocking chairs

What chairs can be made from plywood? There are many options, consider only the most interesting.

How does it swing

The review shows that in terms of the device, all rocking chairs are of 3 types, namely, models with curved skids, models with a pendulum and hanging models. But regardless of the modification, the principle of swinging all rocking chairs is pendulum.

The seat in all of these models moves due to the forced displacement of the center of gravity relative to its original position. Subsequent displacements occur by inertia. As you swing, the inertia weakens and the pendulum stops until you set it in motion again.

Drawings of plywood rocking chair

Choosing a chair model for self assembly, we give preference to those drawings that will be easier to translate into reality. I offer several such drawings.

model on the drawing upholstered furniture, assembled on solid sidewalls, cut out in the form of curved runners, turning into armrests. To connect the sidewalls, you can use transverse inserts made of plywood or planed board.

The supporting frame of this chair is assembled from plywood parts. Cross bars are stuffed over the frame. Bottom part the sidewalls are reinforced with a bent strip of skids. Such a design will be an excellent element of the surroundings of a country terrace or a personal plot.

Puzzle Rocker translated from English means "a rocking chair assembled from mosaic fragments." 4 fragments shown in the diagram are cut from multilayer plywood. Then these fragments are put together without the use of fasteners and the chair is ready. If necessary, the rocking chair is easy to disassemble.

Design requirements and dimensions

The dimensions of plywood furniture are selected so that the overall dimensions correspond to the thickness of the material used. That is, the larger the chair, the thicker the plate should be, from which the details will be cut. The preferred option for any chairs is plywood with a thickness of 25 mm or more.

What you need to work

The most important tool for working with plywood is a jigsaw, which will ensure sufficient accuracy of the cut.

Required materials and tools:

• Multilayer plywood - thickness 30 mm.
• Fasteners self-tapping screws for wood and other hardware for furniture assembly.
• Joiner's glue.
• Paints and varnishes for decorative and protective finishing of furniture.
• Electric jigsaw.
• Screwdriver with a set of drills and bits.
• Clamps for wood.
• Sander or hand grater with replaceable sandpaper.

Chair making process

Making furniture from plywood is not much different from making chairs from other board materials. The process is step-by-step and all steps are performed in the following sequence:

• Cutting the material in accordance with the selected drawing.
• Preparation of parts - chamfering, drilling holes, forming grooves, etc.
• Furniture assembly.
• Finishing, including grinding and processing with paints and varnishes.

Let's consider the above points in more detail.

If the material is purchased for subsequent painting, simply select a sheet of the desired thickness, not paying attention to the texture of the fibers. If a finished furniture it is supposed to be varnished at the end of the assembly, we do not save and get the plywood that initially looks good.

We try to purchase the material that was stored correctly - we are talking about moisture and the absence of sheet curvature. The purchased material must be even and dry. We pay attention to the cut line, all layers must be tightly glued together without peeling.

Preparation of plywood and general rules for working with it

Plywood is a board glued together from sheets of natural wood veneer. On the one hand, the layered structure of the material simplifies the work, since plywood can be bent.

On the other hand, this feature makes sawing difficult, since an improperly selected tool and unprofessional cutting lead to the fact that the layers of veneer along the cutting line of the slab crack and crumble. That is why, when assembling plywood furniture, we follow the instructions and recommendations proposed in this article.

How to prepare material for subsequent sawing? You don't need to do anything special, just make sure the slab is dry enough and free from curvature. If there is curvature, lay the plywood on the bars so that the sheet curves in the opposite direction of the curvature.

Pattern making and drawing transfer

After we decided on the choice of the drawing, it remains to mark the plate in accordance with it. That is, you need to transfer the drawing to plywood, while increasing the scale of the image to natural size. If the design of the furniture to be assembled does not have complex shapes, the drawing from the paper is transferred along the ruler and square.

If it is planned to make furniture with complex shapes, patterns (templates) are cut out of thick paper or cardboard for each part, which are subsequently traced on a sheet of plywood.

Cutting plywood into pieces

For a curved cut, it is preferable to use a jigsaw, as the tool is available. If possible, the workpieces are cut into band saw provided that a blade with a fine tooth is used.

Construction assembly

The chair is assembled according to the drawing. The strength of the finished product largely depends on the choice of fasteners. To achieve maximum reliability, we use self-tapping screws only in unloaded connections. In areas with a high degree of load, we use fasteners consisting of bolts and nuts.

The advantage of bolting when assembling furniture is that the nuts can be tightened during operation and thus eliminate backlash and creaking.

Final balancing

How to balance skids for smooth rocking? Make sure there are no ridges or flat areas on the skids that could impede rocking. If there are such areas, round them off using a sander with sandpaper.

In addition, for smooth rocking without sticking, use the chair on a flat hard surface. If the furniture is to be used on personal plot, it is preferable to make the skids wide so that they do not imprint into the ground.

How to bend plywood for a rocking chair

How to make curved parts out of plywood without cutting out their contour from a single sheet, but by bending the strips along a given radius?

Illustrations	How to bend
	Steaming and bending. This is a classic method in which the part is soaked in boiling water and then molded and fixed in a pattern. After drying, the workpiece retains the specified radius. The method is relevant for plywood of small thickness.
	Cutting and bending. By inside of the intended bend, cuts are made on ¾ of the thickness of the sheet. After that, the workpiece bends. To fix the radius, glue is poured into the cavity of the cuts and a strip of veneer is glued over the cuts. This method is preferred for materials with a thickness greater than 25 mm.

How to make chair pads

Correctly assembled furniture looks good on its own, but soft overlays will make it more comfortable. The easiest option is to make pads in the shape of the seat and back on ribbon ties. You can make these patches yourself, or you can buy them ready-made.

DIY collapsible chair

Summing up

Now you know how to make a plywood rocking chair yourself. If after watching the video on choosing a design and assembling furniture, you still have questions, ask them in the comments to the article.

October 25, 2018

If you want to express gratitude, add a clarification or objection, ask the author something - add a comment or say thanks!

We will send the material to you by e-mail

You used to look at a rocking chair in a store and think: it’s expensive and it takes up a lot of space. And you sit in it and you understand that it is simply impossible to refuse such a purchase. Unusual comfort and peace - would sit and sit in it on the veranda country house admiring the garden. Do not rush to spend money, because you can make this product with your own hands .. We have collected drawings and useful advice from craftsmen, as well as information on the cost of finished products.

By the way, the opinion that a rocking chair takes up more space than usual is erroneous. Modern rocking chairs are compact and in terms of space occupied and are in no way superior to ordinary furniture. Rocking chairs are versatile, but if you are thinking about a chair for the garden, it is better to choose it taking into account the specifics of the installation. Soft seats should be removable so that they can be removed when it rains. The cover of the chair should be selected from a material that is resistant to sunlight and precipitation.

Note! Whatever the design of the rocking chair runners, they will get stuck in soft ground. Therefore, you need to put this furniture on a solid platform.

Types of rocking chairs

View	Main characteristics	Peculiarities
On skids	Pair base; The absence of unnecessary details; Weight limit up to 100 kg; Inertial control type.	The classic version, not intended for use on soft carpets and ground. Differs in extreme simplicity of a design and sensitivity to roughnesses. They can creak if there are problems in joining parts.
pendulum	fixed base; The presence of hinges; They can be equipped with a swing mechanism.	The basis of the glider is motionless, a pendulum mechanism is used for rocking. Are established on any floors, provide the uniform mode of swinging, are silent, indifferent to roughnesses of a floor. Can be equipped with touch and electronic control.
Spring	fixed base; Fastening on a large spring;	They differ in inertial swing mode, have round and inclined seats, usually made of rattan.

Wood, plywood, metal or rattan are used as the basis for the frame. Exquisite models with bent elements are obtained from wood. Such products need to protect wood from moisture and insects. Budget options rocking chairs are made of thick plywood. It is better not to leave such chairs on the street, as plywood is afraid of moisture. The best foundation for garden tools - metal. Masters can even offer you wrought iron chairs, but they are very heavy.

The seats and backs of such chairs are made soft or hard. It is convenient if the soft mattress can be easily removed. They can be washed or removed for the duration of bad weather. Pillow filling can be made of foam rubber, synthetic winterizer, latex, coconut fiber or horsehair. The upholstery of the chairs is selected from practical materials. You can find decoration from tapestry or jacquard, cloth, flock.

Genuine leather is more practical in this regard. If the material is well-made, it is soft and not afraid of moisture. But Genuine Leather – expensive pleasure. An alternative can be eco-leather - durable and moisture resistant. Its only drawback is that using such a chair on a hot day will not be very comfortable. The pictures below show the most comfortable rocking chairs that we have found for you as an example.

DIY rocking chair: options

On the Internet, you will find many options for how to make a rocking chair at home. Craftsmen sometimes use the most unexpected ideas and achieve amazing success in this matter.

High-quality wood will provide the product with durability and strength. And minimal knowledge in carpentry will allow you to build a completely attractive design. If there are no carpentry skills at all, it is better to take plywood. It is easy to cut and process, in addition, reliable furniture fasteners can be found on sale. The hardest thing is to make something from a vine or rattan. It is difficult to make a wicker rocking chair with your own hands; you cannot do without special knowledge. To work with metal, you need a welding machine. If you know how to use it, there is nothing difficult. Some craftsmen suggest using plastic for structures, but such chairs can only withstand a child. For an adult, they are not suitable because of their fragility.

Let's look at some popular ideas on how to make a rocking chair.

Related article:

: for garden, children's room, kitchen, sauna, garden, arbor; how to restore pieces of furniture, helpful tips and recommendations of experts - read in our publication.

How to make your own rocking chair from an old chair

The easiest way to make your own rocking chair is to use an old chair or chair as a base. You will surely find such a piece of furniture in your home that needs to be redone. You can make a homemade rocking chair out of it in just a couple of hours. The only question is what to make the skids from. And you can make them from a pair of wide boards, or a bent pipe.

Skids for rocking chairs: drawings and dimensions

The most important thing about skids is their curvature. It depends on the range of motion. For this reason, do not make too rounded details. The easiest way is to use a thick and wide board - it is easier to fix it, and it is not difficult to make the element you need in size and curvature. A simple drawing with dimensions for a standard chair looks like this.

How to make chair rails

Option 1: plywood. To work, you will need a thick sheet of plywood (at least 1.5 cm). Two curly strips are cut out of the sheet along a pattern 100 cm long. For cutting, it is better to use a jigsaw. In the side part of the legs of the old chair, holes are made for attaching a spike-groove. You can, of course, go even simpler and use ordinary screws. It will not be very aesthetically pleasing, but quickly.

Option 2: bent timber. If you're not looking for the easy way out, try making bent timber skids. To do this, a wooden blank with a section of 45 × 45 mm must be soaked in hot water until elasticity is achieved. Then the beam is bent on a pre-prepared form and fixed until completely dry. Next, the skis are attached to the chair using a spike-groove method.

Option 3: board. From wide board cut out a semicircle. The thickness of the wood must be at least 3 cm. The ends of the runners must be carefully sanded. You can fasten the runners with self-tapping screws or the tenon-groove method.

Features of fastening with a thorn-groove method

For this method of fastening the legs of the chair must be drilled from the sides. After that, a groove is selected in the legs corresponding to the width of the runners. They are inserted into the grooves, the location of the hole in the leg is marked, and they are drilled in the same place.

For fastening strength, all parts are carefully processed with wood glue. After connection, you need to tightly fix the place of contact and leave to dry completely. This method of fastening guarantees a neat appearance and high reliability. The only caveat is that it is not suitable for models of chairs with thin legs.

Important! To balance a rocking chair from an old chair, use a system of counterweights and cross bars.

Related article:

: a photo best ideas. What can be done from a pallet for an apartment, office and cottage; rules for the selection and processing of pallets; master classes on making a table, sofa, bench, armchair and shelving - read in our publication.

DIY rocking chair made of wood: drawings and a master class

Wooden furniture has a number of advantages. It is environmentally friendly, durable, reliable.

These rocking chairs look great in the country and in the apartment, they can be used by children and adults. For wooden rocking chair it is better to use coniferous wood: spruce, pine, larch. Such a tree is relatively light and has a low density, which means it is easily processed at home. In addition, softwood is inexpensive, which means you can not be afraid to ruin some of the material if something goes wrong. Expensive woods such as ash, oak or beech are also suitable for making furniture, but it would be good to have at least some carpentry skills to work with them.

Important! Wood for furniture must be thoroughly dried, otherwise the finished product may deform over time.

Examples of drawings of wooden structures.

And now a master class on making rocking chairs with your own hands. Suitable for any drawings.

Illustration	Action Description
	All details of the future design must be carefully sanded before assembly.
	Mark all connections. For precise marking, use a caliper or a regular ruler.
	To make grooves, use a milling cutter or drill.
	Carefully plan the spikes for mounting. They should not have bumps and burrs.
	Before final assembly check all connections. The spikes must enter the grooves with force. Use a rubber mallet.
	In the pre-assembly process, the chair is made first and the runners are made last. The smooth legs of the chair need to be rounded under the surface of the skis.
	To give the ends of the legs the desired shape, you must use a grinding wheel.
	Glue the batting or foam rubber onto the seat blank, cut it to shape.
	Cover the seat with upholstery. Use a construction stapler to secure fabric or leather.
	Final assembly is done with wood glue. All joints are carefully coated with glue. It is necessary to give the product some time to dry and gain a foothold.
	Lastly, fix the skids with hidden fasteners.

How to make a simple rocking chair from a profile pipe with your own hands

For a metal structure, a round profile with a cross section of 20-25 mm is required. To make the seat, you need to buy a piece of durable awning fabric.

Drawing of a rocking chair made of metal for making with your own hands and a master class

The design of this chair is very primitive. You just need to weld the frame of the appropriate size and pull the fabric strip of the seat over it. The drawing looks like this.

Working with metal will require the use welding machine and a primitive device for bending pipes. If you have difficulty bending, take the blanks to the master in advance. The photo shows a simple algorithm for making metal rocking chairs with your own hands, we will consider all the steps in turn.

Illustration	Action Description
	Slightly bend the tubes for the skids. If there is no pipe bender, this can be done manually with the simplest device.
	For a snug fit of the pipes at the joints, you need to slightly grind the ends.
	Weld the side parts of the seat, as shown in the photo.
	Fasten the skids. Pay attention to the reliability of fastening. All welds must be sanded afterwards.
	Assemble the structure into one piece by welding the cross bars.
	Cut out the fabric for the seat. It is better to do this directly on the welded structure in order to adjust the depth and fit.
	Paint the frame with corrosion resistant paint.
	Fasten the seat by stitching the seams directly on the frame. Make double or even triple stitches for security.
	A simple and comfortable chair will delight you every day.

We have given you the simplest example of a metal construction. If you are ready for more serious work, watch the video on making a pendular rocking chair with your own hands, it is very interesting.

DIY rocking chair made of plywood: drawings and recommendations

Plywood is a light and pleasant material to work with. It is not difficult to make a rocking chair out of it. Such a product is easy to "fit" to any interior painting and decoration. For a chair, it is better to look for oak plywood, it is characterized by increased strength and resistance to a humid atmosphere. The optimal thickness of the plywood sheet is 1.5 cm. If you could not find such material, you can buy thinner sheets and glue them together with wood glue.

What is important to consider when working with plywood:

• plywood sheets are very large - prepare a convenient place for cutting, where you can easily turn the material;
• all parts must be coated with a protective compound before assembly: paint or varnish, stain;
• all end parts must be carefully sanded. Ideally, hide them with a plastic or metal edging;
• remember that plywood is not sawn across the fibers;
• nails cannot be driven into plywood parts, all fastenings are made only in drilled holes;
• if there is a need to make a part with a bend, the plywood is soaked in hot water and, after soaking, is fixed in the desired position until it dries;
• for strong gluing, the plywood surface must be sanded with sandpaper and only then the adhesive composition should be applied parallel to the wood fibers. The parts to be glued are pressed with a press.

We suggest looking at an example of assembling a plywood product of the most primitive design in a step-by-step instruction.

Illustration	Action Description
	Mark out the skids using the templates.
	Finish the cut parts on the ends with sandpaper.
	Cut the seating boards to the same size.
	Fasten rectangular pieces of plywood to the inside of the skids as shown in the photo. Use self-tapping screws and wood glue for fastening.
	Attach the cross bars to the skids.
	Cover the structure with stain and varnish.
	On the back of the chair, stretch fabric or leather. You can not do this, but it looks more aesthetically pleasing.
	Place a foam cushion upholstered in fabric or leather on the chair. The chair is ready.

Result in half an hour: video instruction for making a rocking chair from a car seat

Car seats are extremely comfortable, because they are developed by automotive engineers, taking into account the anatomical features of a person. It is a pity to throw out such a chair, but what if you decide to update the interior of the car? Use the driver's seat to create a cozy rocking chair.

If there is no time, but there is a desire: prices for ready-made models of rocking chairs

Any initiative takes time and effort. Need to find suitable material, fasteners, engage in assembly and design. Does not work? You can always take the path of least resistance and just buy or order such a chair. There are a lot of ready-made products, for every taste and budget. You can buy a rocking chair inexpensively in large stores like Ikea at a price of 5,000 rubles. Products made of natural wood with a luxurious design are already worth tens of thousands.

The rocking chair in most people is associated with rest and relaxation. Imagination draws a veranda country house, a warm blanket and a glass of wine. Is it possible to make this piece of furniture, a synonym for a measured life, with your own hands? After reading this article, even a novice master can easily cope with this task.

• glider;
• classic on skids.

Each of the types has a number of features, so we will consider them in more detail.

Glider (with pendulum mechanism)

This type of furniture has a fixed base, and swinging occurs with the help of a pendulum mechanism. It has a number of advantages over the classic one, but the main plus is its silent operation. That is why it is often purchased by mothers for feeding and rocking babies.

Classic on skids

This type of rocking chair is known to everyone, but not everyone knows what a wide variety of subspecies of this piece of furniture exists.

1. On simple runners of constant curvature (radius).

   Radius skids - the simplest and most common type of support

   However, it is worth knowing that this is not the safest design option. Professionals make to order, as a rule, rocking chairs on skids not of constant, but of variable curvature, which are calculated taking into account the height and weight of users. It is these models that have the lowest risk of capsizing.

2. On elliptical skids with tilt limiters.
3. On springs.
4. Roly-up.

What materials can a rocking chair be made of - table

Material	Description, features	Advantages	Flaws
willow vine	Very strong openwork products are obtained from a vine, but this work is very laborious and requires certain skills. this material is often made suspended structures.	beautiful appearance; long service life; ease.	afraid of moisture
Rattan	Rattan products have their own ethnic flavor. Weaving from it on your own is a difficult task, since it is not easy to get material in our latitudes.	very light and beautiful; only braided and glued joints are used in the manufacture.	high price; rather fragile material.
wood mass	The most common material for the manufacture of strong and durable rocking chairs is wood. Different types of wood are used, but the most common are coniferous, especially durable species (alder, oak, larch).	relatively low price; opportunity to make your own.	crafting requires carpentry skills; durable woods have a high price.
Metal	Since the metal has a large mass, only the frame is usually made of it, and the seats are made of another material - plastic, fabric, leather, wood. All-metal forged products look spectacular, but are quite complex in execution. To do this, you need to have a special tool, as well as skills in working with metal.	durability	heavy construction weight
Plastic	To make a folding rocking chair yourself, you will need special equipment.	low price; variety of design.	low strength of the product.

Rocking chairs made of plastic, metal, rattan, willow vines and solid wood - photo gallery

Armchairs for home and garden

In the house it is better to use products from environmentally friendly clean materials not too heavy so as not to damage the flooring. Size also matters if your apartment is not too big. Most suitable option- plastic and wood products. Wicker furniture is also suitable, but not always appropriate in an urban interior.

If you plan to use outdoor furniture, then you need to take into account some points: how resistant is the material to moisture, sun exposure, is it easy to clean. With a certain preparation, a product made of almost any material can be used on the street - forged, plastic, wooden models. Designs with an awning from the sun are relevant on hot days.

You can also make original rocking chairs from chairs that have long been going to be repaired.

Photo gallery: options for wooden garden chairs

DIY rocking chairs

Making this piece of furniture is not really simple task, but even those who have never done anything like this before can do it. There are many schemes, options and manufacturing methods. Consider the most interesting and simple of them.

The simplest chair from an ordinary highchair

The best option is to use an ordinary wooden chair. For manufacturing, you will need the following materials and tools:

• chair with back and armrests;
• high-quality plywood 15 mm thick;
• varnish for wood;
• jigsaw;
• milling cutter;
• Sander;
• dowel.

Stages of work:

1. We cut the radial skids from plywood according to the scheme with an electric jigsaw.
2. We grind them with a machine or sandpaper on a rail.
3. From below, on the legs of the chair, we make cuts and select the grooves for the skids.
4. We insert the runners into the grooves of the chair legs, fix with glue and dowels.
5. We cover the surface of the rocking chair with varnish.

Video: making a highchair

Vanka-vstanka: step by step instructions, photos, drawings

It will also be easy to make such a rocking chair with your own hands from plywood, knowing the drawing. There are many options on the net, we will give one that is devoid of the risk of rollover.

Assembly materials and tools:

• sheets of plywood measuring 1520x800 mm, 15 mm thick (for sidewalls, racks and supports), 10 mm thick (for back and seat slats);
• jigsaw;
• glue;
• screws.

Chair assembly steps:

1. We are preparing a drawing of the future product.
2. We transfer the drawing to sheets of plywood.
3. We cut out the necessary elements using a jigsaw.
4. Drill holes for screws.
5. Sanding, primer and paint all the elements.
6. Assembling the frame.
7. We form the seat and back from the planks, glue the elements.
8. We fix all the elements with self-tapping screws.

Video: simple plywood rocking chair

Is it possible to assemble a pendulum mechanism for a sliding chair on your own

The pendulum design moves the top of the chair relative to its base. To make it yourself you need detailed diagram. This is not an easy job. But the principle of operation of the mechanism is always the same. For the simplest design you will need:

• 4 bars of the same length and two - larger (sizes are chosen depending on the design scheme);
• 8 bearing nuts and washers.

Instruction:

1. Assemble the bars and drill one hole into them at each end for the bearings.
2. Make an end beam (it holds the weight of the entire sliding structure):
   
3. Attach each end part to two bars. This will be a simple pendulum mechanism. Then it is connected to the base of the chair and the seat. An example of the finished design is below.

Rocking chair made of plastic (polypropylene) pipes: diagram and procedure

The chair can also be made from profiled metal or simple water pipes. For work you will need:

• plastic pipes with a diameter of 25 mm (for sidewalls) and 20 mm (for transverse elements);
• drill and apparatus for welding pipes;
• fittings with a section of 15 mm (inserted into pipes to enhance the stability of the chair);
• fittings for corner connections(2 pcs for 90° and 6 pcs for 45°);
• pipe plugs;
• pencil, ruler.

Instruction:

To make the chair comfortable, a foam mattress 50 mm thick must be fixed on the frame. To do this, you need a cover with ties, which is easy to sew on your own (on a typewriter or even by hand).

give plastic pipe rounded shape can be using hot sand. To do this, the sand is heated in an oven to 95-130 ° C, a plug is inserted into one end of the part, the tube is filled with sand, given the desired shape and waiting for cooling.

The desire and basic skills to work with the tool are all that is needed to independently build a comfortable and beautiful rocking chair for home or summer cottage. The described instructions will help you do it correctly and quickly.

A rocking chair is always associated with a quiet, calm evening dedicated only to relaxation.

Of course, you can use it at any time of the day, but you can’t relax in the way that rhythmic and rocking movements allow, nowhere else.

That is why this piece of furniture today can be found not only in the garden, but also in respectable offices. Moreover, many companies equip rest rooms with them.

The rocking chair allows you to relax not only the body, but also the brain.

Scientists have long proven that rhythmic repetitive movements, such as walking or rocking, help to calm down, concentrate, and put things in order.

Most challenging tasks in such an environment, it is much easier to solve.

If you know, in the country, then a high-quality, fresh lawn will always be the subject of your pride and admiration of your guests. Details in the article.

Sunny and varied astilba: planting and care in open field depending on the type of plant. What for different types astilbes?

Ideal choice for a summer residence

An obligatory detail of any resting place on the site. The most popular models are made of vines, artificial and natural rattan and forged.

Their advantages:

• beautiful appearance;
• strength;
• resistance to moisture and ultraviolet;
• durability.

Of course, it is in the garden that the rocking chair is most appropriate. It can be installed in a gazebo, on or an open veranda. Models made of natural materials harmoniously fit into any landscape design.

On modern estates they look beautiful and bright Garden swing on runners made of metal and textiles. For areas with log cabins or buildings made of timber, it is more suitable wicker furniture or from an array.

If the design of the cottage is dominated by buildings and decorative elements made of stone, you should pay attention to artistic forging or cold bending.

Unusual design solutions can be a bright accent in the landscape. These are rocking chairs for two, or a kind of beds that can easily replace the usual sun loungers.

Variety of options

The history of the rocking chair has a little more than two centuries. And this wonderful idea belongs to a talented person, inventor and politician - Benjamin Franklin.

But, in Europe, it gained fame and distribution only in the middle of the XIX century. Today, skid models are popular. It is these rocking chairs that can be found on the pages of the classics describing the life of the aristocracy and in modern gardens.

Relatively recently, a completely new design has appeared. Sliding rocking chairs without skids. They are ideal for interiors with delicate floors.

The materials from which such furniture can be made are striking in variety:

1. It can be solid types of wood.Such chairs attract with their massiveness and reliability, while the variety of shapes and design solutions here is limitless. It is among the models made of wood that you can find both golden classics and avant-garde.
2. Rattan and vine- a traditional material for the manufacture of rocking chairs. Their distinguishing feature is lightness and delicacy. Today, wicker furniture can also be made from artificial material. It is practically no different from models made of willow or vine or rattan, but at the same time it is not afraid of moisture.
3. Metal- the material is plastic, but heavy. Wrought iron furniture always looks luxurious. But, the weight of such products is significant. That is why even in the garden it is better to use them only on stone or concrete platforms. Metal skids will sink into the ground and damage the turf of the lawn, on wooden planks they also leave noticeable traces.
4. Gaining popularity today plastic models. They are durable, resistant to any vagaries of the weather and bright and modern design. Equally important is the fact that models made of this material are the most affordable.

Smooth hands and desire

You can make a rocking chair with your own hands. This will require, first of all, desire and a little time.

Most popular materials self-manufacturing such furniture - wood, plywood and metal. What to choose, each House master decides himself. It depends on the availability of material and the ability to work with it.

A photo selection with ready-made rocking chairs that you can make yourself:

We use wood and plywood

This is probably the simplest and affordable option. To work, you will need tools that almost every home master has.

In the photo, a drawing of a rocking chair made of plywood

You can watch how to make a rocking chair with your own hands from wood and plywood using only an ax, a planer and a saw in the video presented, but such work requires a lot of woodworking experience. This video is the first part of a series of tutorials. In any case, this is a high-quality and real experience from the master, who can really show how to make this piece of furniture yourself.

If you're not used to doing just hand tool, then for work it is necessary to prepare:

• jigsaw;
• screwdriver;
• self-tapping screws and drills of different diameters;
• sandpaper of different grain sizes for processing finished parts.

The easiest way to make a rocking chair out of wood with your own hands - use an old but durable chair. Its legs are shortened, and the resulting structure is mounted on hardwood skids.

To give it a new and non-standard appearance it can be braided with leather or plastic ribbons or sewn into an unusual case.

More interesting models are easiest to make at home from plywood with a thickness of at least 15 mm. The general idea is pretty simple. Sidewalls are cut out of sheets according to a pre-calculated pattern. For example, it could be like this:

Cut out the sides

The edges of plywood are carefully processed. Two parts are interconnected by three bars 30x50x600mm.

The upper part is laid out with thin boards or plywood planks with dimensions of 10x50x600 mm (the length can be longer if it is necessary for the planks to protrude beyond the edge of the sidewalls), which are attached to the end with self-tapping screws.

To avoid cracking and delamination of plywood, it is recommended to pre-drill it at the fastening points with a small diameter drill.

It is also worth making recesses in the facing strips so that the hats of the hardware are recessed.

If desired, they can be hidden with special plugs to match the wood or puttied.

After assembly, the tree can be tinted and varnished or painted in any color.

Metal armchair

Metal is a difficult material to process. And if there are no skills in forging or equipment for the manufacture of bent elements, then only simple models armchairs, but they can be no less interesting.

First of all, a metal frame is made from a corner, pipe or profile.

After that, all parts are coated with an anti-corrosion compound. Hammer paints look very nice. What will be decorative trim- depends on the desire and imagination of the master.

For example, the seat may simply be made of wooden planks. Or the model can be soft. Why the seat can be braided with an ordinary luggage belt.

Sew pillows for the back and seat and hide everything with a common removable cover. Also, a metal frame is simply enough to braid with a willow vine. To do this, you will need the very basic knowledge of weaving from a vine, which can be found on the Internet.

Your hand is the master

Although only two simple options are presented in detail, they can be implemented in different ways. Based on the above recommendations, you can assemble a wooden rocking chair of this kind.

In the first video, we see drawings for making a rocking chair with our own hands:

On the second tips and assembly instructions:

As you can see, in this master class, a simpler shape of the sidewalls was used, but special attention was paid to the design. Such an armchair will look luxurious not only in the garden, but also in the office.

Experiment is the engine of evolution

By experimenting with the basis of the frame, other models can be made according to a similar principle. For example, with armrests.

If desired, it can be a whole furniture group for two people. This model not only looks very original, but also allows you to relax in a pleasant company.

Armchair for two persons

Moreover, it is enough to dream up a little and the usual rocking chair turns into a comfortable couch with an awning. You can rest on it in any heat. And if you equip with a canopy of mosquito net then sleep on summer nights in the fresh air.

No less interesting and unusual are the ideas of home craftsmen for models on metal frame. They can be openwork and almost weightless.

Or simple, concise and modern.

To make such a model, you will need welding and a pipe bender. Its design is extremely simple. And the seats can be both wicker and sewn from dense material.

You can also make a rocking chair in a classic style from metal pipes.

Rocking chair in classic style

No less interesting is the patchwork style model, in which a metal ring is taken as the basis for the seat. This chair is perfect for a country style cottage.

Rocking chair in country style

Making a rocking chair with your own hands is not just the creation of an exclusive thing, but the opportunity to make such furniture that will be convenient for you and fit the design of your site. This is a great chance to show imagination and creativity.

Many of us are familiar with such a piece of furniture as a rocking chair, which can be found in many country houses. For most, it is one of the favorite vacation spots, but not everyone knows that everyone can make such a chair. However, first you need to acquire certain knowledge, skills and prepare a tool.

In recent years, the rocking chair has become a fairly common piece of furniture. In the assortment of many furniture enterprises you can find a large number of models of rocking chairs designed for use in apartments and offices. Moreover, there are among them models made in classic version weaving method, as well as modern products that fully meet the requirements of high-tech style.

Benefits of a wooden chair

Before you start manufacturing, you need to decide what material to use for it as a basis. Although there are many options, the wooden chair is the most common. Therefore, further list the advantages that this material has:

• environmental Safety. Wooden furniture has been very popular among consumers for many years, which provided it with such qualities as natural origin, safety and hypoallergenicity. Therefore, the owners wooden chairs do not face any inconvenience in the process of using it, because they are confident in the environmental friendliness of this material;
• strength and long term services. Wood is a fairly durable material, which was transferred to the furniture made from it. In addition, it perfectly tolerates mechanical stress and demonstrates a long service life;
• attractive appearance and variety of forms.

Rattan rocking chair

We repeat that rocking chairs today offered in large quantities most various options. One of these products is a rattan rocking chair, which not only has a pleasant design, but is also able to harmonize perfectly with other elements of the cottage interior. The birthplace of rattan is South America, and this plant itself is often referred to as a flexible liana.

Of the features of this material, it should be noted high strength, in which it is capable compete with wicker.

The technology of manufacturing armchairs from this culture is characterized by the fact that instead of traditional joints based on screws and bolts, glue and skillful knitting are used. Alas, it is impossible to buy this tree in our country, so most owners of country cottages will not be able to make such a chair with their own hands.

Wicker rocking chair

A photo of the options available today for this piece of furniture allows us to judge that a wicker rocking chair is quite in demand today. It can be found in cottages and even in apartments in many regions of our country. Willow vine is used as a material for it, and the finished chair itself fits well into the interior. garden house, cottages and even garden greenery. consumer rocking chair willow vine attracts primarily because of its low weight and high strength. However, such furniture has one serious drawback: excess moisture negatively affects the material, so it is not recommended to keep such chairs outdoors in wet weather.

Materials for manufacturing

Regardless of what type of wood you decide to use to make a wicker chair, you must have certain skills. The tree is affordable and easy to process, so many owners who are thinking about making a rocking chair with their own hands most often consider using wood as the basis for it. But first it is necessary prepare certain tools for making furniture:

• electric jigsaw with a set of knife blades;
• disc grinder with a set of coarse and fine-grained nozzles;
• screwdriver with drills;
• tape measure and corner with a ruler;
• hammer and spatula;
• brush and pencil.

Execution of the drawing

Even before you start work, you should consider that in order to make a quality rocking chair with your own hands, a drawing is required.

Having a sketch in hand, you can avoid serious errors in terms of product dimensions and correctly determine the quantity of materials that you will need to make.

First you need to take a metal mesh, each cell of which corresponds to 1 cm, and outline on it a template for the side of the chair. To further make it more convenient to work, it is recommended to transfer the created chair template to plain paper. So it will be easier for you to mark the outline of the chair already on the plywood itself. Do not worry if small errors are made. Here it is important to maintain the symmetry of the sidewalls and avoid protruding corner elements on the outer rolling part.

To do this work, we need plywood 3 cm thick, from which three drawers are cut dimensions 120 x 800 mm. The manufacture of sidewalls is carried out using an electric jigsaw exactly according to the pattern. After that, you need to take a beam 50 mm wide and 25 mm thick and cut out 35 fragments from it, each of which should be 120 cm long. The finished bars will later serve as a seat and back for us.

Try to get as much timber at the very beginning to minimize waste. This will be quite easy to do, given that you can calculate the total length of the timber even before buying. Say, if it has a length of 2.3 m, then it is better to make the chair narrower. As a result, its width will decrease to 115 cm, however, this will allow you to avoid waste. The given dimensions of the rocking chair do not require their exact observance. Therefore, if in the course of work it becomes clear to you that it would be better to increase or decrease the size to minimize waste, you can do it without fear.

Workpiece processing

Surface treatment of workpieces is carried out using grinder. During the operation, it is necessary to pay special attention to their ends. If, during work, wood fibers protrude on them, then you need to use a hammer and level them, and then process them with hot drying oil. So you will make the ends of your furniture more resistant to moisture, which will positively affect its service life. When the drying oil dries, it is necessary to re-process to consolidate the result.

The assembly of the chair is carried out, focusing on the drawing of the rocking chair. Need fasten the two sides, used kings. But first you need to mark the places where they will connect.

According to common schemes for the manufacture of rocking chairs, it is recommended to fix them in the head area, in the middle and at the legs. When you have to fasten the tie bars to the sidewall, use a confirmation for this. This name is given to a special screw screed, with the help of which wood materials are fixed. First, before fastening, it is necessary to create holes in the sidewall 8 mm and in the end of the drawer side 5 mm.

Next, we begin work on creating the seat and attaching it to the base. We take earlier cooked 35 pieces of timber, in which you need to make four holes for two on each side. After that, the bars must be fixed to the sidewalls. Given the number of holes present, it is recommended to fix the bars with 3 or 4 mm self-tapping screws. During the fastening of the boards, constantly check the horizontal position of their installation.

Finished product processing

If we turn to the experience of making rocking chairs made of wood and plywood by ordinary owners with their own hands, we can identify a number of serious mistakes made after assembly. Among them, I would especially like to dwell on poor-quality finishing or its absence. In order to do everything right and ensure the chair has the longest possible service life, it is necessary do the following:

• process the hole above the screws with putty;
• cover with a layer of antiseptic;
• apply waterproof varnish in two or three layers.

If you perform all the above work exactly, you can be sure that a rocking chair made by yourself will be able to please you for more than one year.

If you are going to start making a rocking chair with your own hands for the first time, then it will be useful for you read the recommendations experienced craftsmen who have done this work more than once:

Other types

One of the varieties of this piece of furniture is wooden Baby chair . It is done according to the same scheme as described above, however, you need to adjust the size for the age of the child. This also applies to the tilt of the backrest and handles. Quite often, child seats are made in the form of a horse.

Of particular interest is the rocking chair for the office. The peculiarity of its manufacture lies in the fact that leather is used for facing, as a result of which the product acquires a respectable and solid appearance. Having such a chair at hand, a person will have the opportunity to relax and unwind during the working day.

Conclusion

Although furniture manufacturing offers a fairly large selection of furniture, one of the most desirable for many cottage owners is a rocking chair. Settled in it you can relax and allow yourself to forget about everyday affairs for a while.

Moreover, in order to personal experience to feel all the benefits of having such a piece of furniture, it is not necessary to spend big money on buying a rocking chair. You can always make it yourself. Given that you can use available materials and tools, any person who at least once held a hammer and a saw in his hands can cope with this task. There are many ready-made schemes for the manufacture of such furniture, therefore, if you strictly follow the technology of manufacturing a rocking chair, you can create a fairly elegant and reliable product that can serve you for many years.