Drainage

Liquid wallpaper for the bedroom: try something new. Liquid wallpaper - photos of interiors in ordinary apartments and material features Liquid wallpaper design solutions

When choosing a material for wall and ceiling decoration, many rely not only on aesthetic appearance finished coating, but also for the low labor costs of the event. With the appearance on the construction market of a material called the repair problem, for many, it was solved - after all, a beginner can cope with the application of this material, and if an assistant is needed, then you can handle it alone .. Photos in ordinary apartments will clearly demonstrate the versatility and high decorativeness of the coating , and the reviews of those who have already tried this finish will consolidate a positive impression of this material.

Read in the article

Liquid wallpaper photo in the interior of rooms - description of the material

Liquid wallpaper is also called silk because of the similar consistency that the composition prepared for application has. It includes cellulose, cotton or silk fibers, dye, adhesive composition and decorative filler (glitter). One of the positive qualities of this material is its environmental friendliness, thanks to natural components. In terms of safety for human health, they can be compared with paper.

Externally, the dry mixture is flakes different shapes and size. White liquid wallpaper can be tinted during the preparation of the mixture or painted after it has dried on the wall. On sale there are ready-made compositions with colored flakes, which only need to be diluted with water before being applied to the wall. Depending on the size of the flakes, their shape, size and type of decorative filler, final result. In any case, this finish looks original on the walls of any room.

The advantages of wet wallpaper for walls and ceilings - photo

This variety finishing materials has the following positive qualities:

It is environmentally friendly, safe for humans and environment finishing material.
Despite the rough surface, such wallpapers are not covered with dust, as they do not accumulate static electricity.
With the help of such a coating, which is applied like a composition, it is possible to hide the irregularities and defects of the walls.
After applying and drying the composition, a coating is formed on the wall, which is characterized by high strength and aesthetic appeal due to the absence of joints, when compared with conventional ones.
To make the front layer stronger, it is treated with acrylic varnish, but then the coating loses its valuable quality - vapor permeability. In rooms where the risk of damaging the wallpaper is minimal - in the living room, they are left without a protective coating. And in rooms with high humidity and pollution (on, in,) you will need to protect the front layer.
In the children's room, there is a risk of damaging the coating, but here you should not deprive the walls of the ability to "breathe" - in rooms such as bedrooms and, a healthy microclimate is very important, which is provided by vapor-permeable materials.
In case of mechanical damage to the coating, it is easy to repair. If a small area is affected, then it is enough to moisten the place with water and smooth it out. In case of significant damage, a fragment is cut out with a clerical knife, and a fresh layer is laid in its place. In this case, the mixture left in reserve after repair will come in handy, which can be stored even in a ready-made dried form - it is enough to soak it before work.
Unlike paper, silk does not burn, does not support or contribute to the spread of fire. Therefore, they can be considered fireproof material.
To apply the composition to the wall, you do not need to have any specific skills - it is enough to be able to work with a spatula.
This material provides heat and sound insulation in the room where it is used.
Under the influence of the sun, coatings containing silk fibers do not fade.
In the kitchen, such a coating will not absorb odors.
Due to its elasticity, the material can be safely used in.
A unique decorative effect is obtained by adding various fillers. And with the help on the walls you can create patterns, ornaments and even paintings.
The cost of the material is higher than standard paper roll products, but it is fully justified unique qualities silk.

Important! Given that it may be necessary to repair a section of the wall, the material is purchased with a margin.

Design of liquid wallpaper in the interior of the living room with a photo

Undoubtedly, liquid wallpaper will decorate the main room in the house - the living room, where family members gather, receive guests and hold family celebrations. In terms of texture, they are quite expressive, so they can be used to create an accent wall or decorative composition, leaving the decoration of other walls in a neutral design. Interestingly, liquid wallpaper is universal and looks equally organic in both modern and classic.

Decoration with liquid wallpaper in the interior of the bedroom

Liquid wallpaper in the children's room

In the children's room, such a finish is left without varnish in order to preserve the natural microcirculation of air in the room. In case of mechanical damage, the unique maintainability of the material will save. Here you can use the most a budget option with cellulose. If you look at the photo liquid wallpaper in ordinary houses, it is clear how this material is unique and organic in premises of any purpose. With the help of a dye, white liquid wallpaper can be painted in, dividing the composition into the required number of shades, and creating a decorative panel on the wall using a stencil.

A few years ago, liquid wallpaper appeared on the market for finishing materials. Gradually, they are becoming more and more popular, as they can be used for 5-8 years without losing their appearance, even in the hallway or corridor. Among the advantages of this coating are safety, high maintainability, plasticity, which allows you to easily finish arches, columns, and other complex-shaped surfaces.

What it is

Liquid wallpaper is sometimes confused with decorative plaster. Probably because the application technique is very similar. - using a spatula. The fundamental difference is that the composition of the applied mass is completely different. Any plaster contains sand, and cement and lime are used as a binder. The composition of liquid wallpaper includes silk, cotton, cellulose fibers. As a binder - some kind of glue.

Acrylic dyes are usually used to color the composition, and in order to obtain a surface that is different in appearance, sparkles of various sizes, pieces of mica, mother of pearl, threads, and other natural or artificial materials are added. These decorative additives are called "glitters".

How do they look on the wall

If we talk about appearance, liquid wallpaper is a cross between plaster and paper wallpaper. From the store you bring a dry composition, to which, according to the instructions, add a certain amount of water. The resulting semi-liquid mass is applied to the walls or ceiling. The coating is seamless due to the plasticity of the material; minor surface defects are corrected during application - recesses, cracks, etc. Due to the same plasticity, it is not too difficult to form a drawing, even a picture.

Liquid wallpaper can be applied to the walls even complex patterns ... or paintings

So on the wall, liquid wallpaper looks different. Differences are added by another different composition. If it is a silk-based liquid wallpaper, the surface has a characteristic matte sheen. This composition is also called "liquid silk". Cellulose and cotton variation - matte, even in the same shade and with the same decorative additives, the wall looks different.

And there are also mixed compositions - cellulose-silk or cotton-silk, in which there is a certain degree of sheen, but not so pronounced. In general, it's hard to say what liquid wallpaper looks like on the wall. If you like decorative plaster, you should like this finish too.

Kinds

Liquid wallpaper is distinguished by composition. As already mentioned, they are made on the basis of natural fibers. According to the type of these fibers, they are:

They differ not only in composition, but also in appearance. It is difficult to convey this in the pictures - the difference is in the presence and type of gloss, its brightness, visual "looseness" or smoothness of the surface. Of all the options, the most expensive silk compositions. More budget - cotton and cellulose.

Advantages and disadvantages

If we talk about the general impression, some people like liquid wallpaper, some do not. But they have good features. The advantages include the following qualities:

Good qualities. Most impressive is the high maintainability. This is good in the presence of pets: scratches are simply overwritten. If you like this coating also externally, you should try it.

Liquid wallpaper also has disadvantages:

As you can see, there are some pretty serious drawbacks. The most unpleasant thing is the impossibility of wet cleaning. In the hallway or in the kitchen, this is not always acceptable. This disadvantage can be leveled by varnishing the wall. It can be washed, but cannot be restored. In addition, the varnished coating loses vapor permeability, but becomes water-repellent.

Application technique

Although manufacturers say that liquid wallpaper can be applied to curved walls, it is better not to do this. There are two points. The first is increased material consumption. Considering that the cost of liquid wallpaper is not too low (one package per 4-5 m² is required, and it costs from $5 to $18, although there are $40), it is cheaper to prepare the surface. The second point is that if there are significant differences, a pronounced “spotting” may result. Darker will be the areas where the liquid wallpaper lay down in a thick layer, and lighter where the layer is thin (due to the translucence of the wall). This again leads to an increase in consumption - to even out the color.

Surface preparation

First of all, you need to remove the old decorative coating. We peel off the wallpaper to the bare wall, we also remove the paint, if it bubbles and peels off. Then we smooth out the bumps. As already said, better wall make it more or less even.

A smooth (or relatively flat) wall must be smeared several times with a primer. This will reduce the absorbency of the surface, making it easier to work.

According to the experience of use, liquid wallpaper is best applied to rough walls, such as plaster. So, it is desirable that the primer gives a similar effect. Of the finished compositions, this is Betonokontakt. After its application, the wall becomes a little "viscous" in sensations, grains of sand adhering to the surface make it rough. On such a basis, any composition fits perfectly. There is also a cheaper option for priming walls for liquid wallpaper - the most inexpensive white water-based emulsion (2 parts) with PVA glue (1 part). It is necessary to cover with a primer (any) at least twice.

If the wall has an uneven color, and the primer did not hide it, you will also have to paint it. Because when applying a thin layer, darker and lighter areas will shine through. You can get the cheapest water-based paint and paint the wall with it. Ideally even color is not needed, there should not be sharp transitions.

One more moment. If there are metal fragments in the wall - nails, screws, etc., it is advisable to remove them. If you can't remove it, paint the area with some kind of water-repellent paint the same color as the base. If this is not done while the liquid wallpaper dries, the metal will rust, and the rust will “come out” with an ugly yellow spot. Will have to repair immediately. So it is better to isolate all metal objects in advance.

Composition preparation

Liquid wallpaper is sold dry in bags. Before use, water is added to the composition, everything is well mixed. The amount of water depends on the volume of the bag, the type of composition, the manufacturer. The specific amount is written on the package.

It is more convenient for this work to have a large plastic bucket - 12 liters or more. Pour the contents of the package into it, add water. The mixture should be stirred until smooth. It turns out something similar to minced meat.

Since liquid wallpaper does not contain harmful chemical additives, you can mix it with your hands. If the mass is unpleasant for you, you can wear gloves. The finished mass is usually transferred back to the bag, the “neck” is twisted and left for several hours (at least 4-5 hours, but preferably 10-12) - for uniform swelling. Please note that the dried composition will be noticeably lighter than wet.

It is better to knead at once all the amount necessary to finish a room or at least one wall. If you put it in "pieces" you can see the borders. They are almost invisible on light shades, but can spoil the picture if the color is bright. If the borders are still visible, until the wall is completely dry, you should not take any action. Perhaps the borders will disappear when completely dry. If the liquid wallpaper is dry, but transitions are visible, the composition can be removed with a spatula, soaked again for several hours, mixed and applied again.

Wall or ceiling application

To work take a new trowel. To make it easier to follow the process, there is a trowel with a transparent plastic work surface. It is easier for beginners to work with such a trowel. The process itself is simple:

It is advisable to process the entire wall at a time, otherwise the junction lines of the two "pieces" may be visible. If, nevertheless, it was not possible to process the entire wall at a time, sprinkle the joint well with water, wait 20-25 minutes, you can continue finishing. Most likely, the joint will be subtle or almost invisible.

In the corners, you can use an ordinary spatula, but it is easier to make even corners with the help of special corner ones. First, a mass is applied on both sides of the corner, carried out with an angular spatula, the excess squeezed out is rubbed from the corner onto the wall, leveling the surface.

Liquid wallpaper dries for a long time - about 48 hours. The composition contains a substantial amount of water, so that when dried indoors high humidity, which inevitably falls into other rooms. But in the process, you can turn on the heating, open windows, arrange a draft. There are no restrictions.

Roller application

Applying liquid wallpaper with a trowel or spatula is good for everyone, except that the process takes a lot of time. To speed up the process, you can try applying liquid wallpaper with a roller. Only the roller should be special: with hard short hairs collected in groups. The width is about 15 cm. If this is not found, you can use fur with a hard short pile or foam rubber, but hard.

Before starting work, dilute liquid wallpaper according to the instructions, prepare the wall. After trying to work with the resulting composition. If the mass is poorly distributed on the wall, add a little water. But add little by little, because too liquid will “creep”. The technique is slightly different:

Apply a certain amount of mass to the wall with a spatula, not worrying too much about the thickness of the layer. Just make a "flip".
Roll out with a roller.
Apply the next batch of mortar, roll out.

With the help of a roller, it is easier to maintain the same thickness of the material. This works well on flat walls. Moreover, the finishing speed is 6-8 m².

Different application techniques produce different effects

When applying liquid wallpaper with a roller, the surface is more rough, textured. If you don’t like this effect, after the wall is finished, moisten it with a spray bottle, wait 15 minutes, go over the surface with a clean trowel soaked in water, smoothing the relief.

How to make patterns with liquid wallpaper

It is unlikely that beginners will be able to make complex patterns on the walls with liquid wallpaper, but it is quite possible to try something simple. The easiest way to make two-color patterns, and the easiest - geometric.

You can find any image. But then you need to transfer the outline of the drawing to the wall. If you have artistic ability, you can try to do it "by hand". If it doesn’t work out, you can enlarge it to the required size, print it on paper, but it’s better on cardboard, cut it out and attach it to the wall. Fill around with one wallpaper color. When the liquid wallpaper is dry, remove the paper/cardboard using a second fill in the empty area. But it is necessary to work carefully, without dirtying the already finished part.

If the drawing is simple - geometric figures, for example, you can install some kind of hard barrier to separate colors. For example, beacons for plaster. They are fixed, filled with liquid wallpaper of the same color. After drying, you can remove the beacons and carefully, without crawling onto the finished part, use the second color.

There is a way to transfer complex drawings without printing. You will need glass, a black marker, a lamp. Draw a contour on the glass with a black felt-tip pen, highlight it with a lamp. A clear outline appears on the wall, which we simply direct. We fill in the way that is more convenient, but usually first large areas, then smaller ones.

Starting repairs in the apartment, you should think about what finishing materials you will use.

Currently, good option for wall decor are liquid wallpapers.

Liquid wallpaper is a special coating that is used to decorate walls. Its texture resembles decorative plaster. The composition of liquid wallpaper includes:

silk;
gelatin;
seaweed;
crushed parts of the bark;
cotton.

Due to the use of silk in the manufacture of liquid wallpaper, this material is similar to a fabric coating.

The peculiar texture of the wallpaper allows you to apply any drawings, ornaments to the surface of the material.

What you need to know about liquid wallpaper?

Designed only for interior decoration premises;

Apply only to a smooth, pre-treated surface;

Ecological product. They can be safely used to decorate a bedroom, nursery or any other room.

Types of liquid wallpaper

There are many models of liquid wallpaper for walls, but still they are divided into 3 main types:

Cotton;
Cellulosic;
Silk products.

The composition of cotton liquid wallpaper includes: 98% cotton, 2% mica impurities. Connoisseurs of natural materials will stop at this wallpaper model.

Advantages of cotton liquid wallpaper:

Environmental friendliness. Natural composition with a minimum amount of impurities;
Antistatic. Repel dust.
Breathability. Easily let air through, so fungus will never appear on the walls of your house;
They have good thermal insulation;
Service life more than 10 years;

Plastic. Due to this property, you can easily complete not only the decoration of walls, but also arches, columns.

The composition of cellulose liquid wallpaper includes wood fibers left over from processing. Due to this composition, it is possible to finish the walls even in unheated rooms.

The service life of this type of wallpaper is slightly less than cotton wallpaper. The main advantage of liquid cellulose wallpaper is the possibility of finishing walls with microcracks.

Silk or silk-cellulose liquid wallpaper consists of silk and cellulose fibers. Practical to use.

With them, you can realize any design ideas, and the pricing policy for these liquid wallpapers is very democratic. Anyone can afford to buy them.

Types of liquid wallpaper

Liquid wallpaper is divided into 2 types depending on the initial state:

dry;
Liquid.

When dry, liquid wallpaper resembles pieces of cotton. To the desired consistency fights this species liquid wallpaper is diluted with water.

The exact doses of adding liquid are written in the instructions on the pack. Liquid wallpaper - the finished product, which remains to cover the wall. Both types of liquid wallpaper are applied with a roller, spatula.

Advantages of liquid wallpaper

Moisture resistant. Do not be afraid of sudden changes in temperature and the appearance of humidity;
breathable; Due to the use of natural types of materials, liquid wallpaper has micropores that allow air to pass through;
Equipped with thermal insulation;
Mask small uneven walls;

Protect against rust. If liquid wallpaper is applied to pipes or batteries, then they will serve as a good protection against corrosion.

A variety of textures and color palettes, allows you to choose liquid wallpaper for any design, resistant to deformation.

With the advent of liquid wallpaper, wall decor has become much easier.

Photo of liquid wallpaper in the interior

This type of finishing materials appeared on the construction market quite recently. But he has already won the hearts of many people. Based on the name, associations in the form of ordinary wallpaper rolls instantly arise in the head. However, the adjective "liquid" is confusing.

In fact, between traditional wallpaper and liquid wallpaper, the only thing in common is the fact of applying a finish. They are more similar to decorative plaster.

Our article and the attached photos of liquid wallpaper will tell in detail about the advantages and disadvantages of this type of finishing materials, about the methods of applying to walls and finishing options.

Liquid wallpaper - what is it?

The main components of liquid wallpaper are cellulose and silk fibers, for which KMS glue is used as a link. To prepare the composition some degree viscosities use ordinary water.

Fibers from cellulose and silk are obtained as a result of the processing of waste materials from some industries. Sometimes, various fillers in the form of decorative elements can be used as additional components. For example, glitter.

This type of finish is unique in that it can be used to make any pattern on the wall filled with warmth that you can feel with every touch of your hand. Liquid wallpaper in the interior has a noble appearance.

To prepare the solution, you can purchase a dry mix, hermetically packed in a packaging bag, or buy a ready-made version of liquid wallpaper in Leroy Merlin or in other building supermarkets. It is recommended to use them according to the attached instructions, exactly following all the recommendations in order to get the desired pleasant result.

Through the use of such modern version wall decorations take on a more colorful look. Many mixtures have the same texture, as they are made from identical fibers, while color is achieved by adding various additional components.

The most scrupulous buyers in terms of design are offered exclusive options for wall decoration using tinting additives that will help create the necessary images.

Advantages and disadvantages

The advantages of a new type of finishing materials include:

beautiful appearance, which is achieved by adding various color components. In addition, you can purchase more expensive finishes with additives in the form of patterns.
ease of recovery from damage. You can repair the damaged area with the help of a master or on your own. To do this, moisten this place with water, then remove the damaged piece of wallpaper with a spatula and apply new layer to the same place.
do not require special preparation of the walls. Due to the elasticity of the resulting wallpaper composition, they perfectly fill all the existing wall defects, as they are plaster, which, in fact, is intended for this.
the presence of thermal insulation properties. IN winter time years, it is always pleasant to touch or lean against it, while not feeling discomfort. The walls do not penetrate the cold, and they remain warm.
anti-static, as a result of which dust is not attracted, which will appeal to every housewife. If the wallpaper is coated on top with acrylic varnish or a primer, then you can even wet clean them.
long service life. Basically it is more than 15 years. In addition, they do not fade from the sun and perfectly withstand sudden changes in temperature conditions.
ease of application. Even if you do something wrong, it can be easily corrected at any time, and at no extra cost.

Other advantages of wallpaper include: fire safety, environmental friendliness, moisture resistance, vapor permeability, lack of seams and cracks, versatility.

Minor shortcomings include the following:

fear of water. But this can be eliminated with the help of acrylic varnish or primer applied over the wallpaper. However, if necessary, it will be more difficult to remove them.
high price. Decorating all the walls of an apartment or house will not be cheap. Therefore, most often they are used to decorate any fragment of a wall or arched openings between rooms.

DIY liquid wallpaper

For self-production of wallpaper at home, you need to know the components of the solution: water-based dye, paper (cellulose), KMS glue, decorative additives (glitter, stone chips).

At the beginning of the process, you will need a plastic container with a diameter of 50 cm (or more) and a depth of about 40 cm to mix all the components of the decorative mortar. In such a container it will be quite convenient to thoroughly mix the mixture. Next, you should prepare clean warm water.

All the necessary components of the solution should be at hand. White or colored paper is suitable, but not too thick, it is even possible to use old newspapers. Make sure that no remnants of rope, metal staples, etc. get into the mixture with the paper.

The basic solution preparation process consists of the following steps:

carefully shredded paper is placed in a prepared container,
the dry composition of the granules is poured into the basin in the amount of 1 package and gradually filled with water (about 5 l),
the contents are mixed until the composition is homogeneous, the structure is like thick sour cream. Mixing can be done manually or with a special mixer.
the presence of lumps in the mixture or other unwanted objects is determined,
KMS or PVA glue is added.
a small amount of gypsum is added,
if necessary, colored filler is added in accordance with the interior of the room.

To dilute a solution that is too thick, add a little water and stir everything again.

The finished mixture should be left for 6-12 hours to infuse, so that the glue binds all the components with high quality.

The solution should be prepared in small parts, i.e. for individual elements, and not the entire room as a whole. But not too small, as the second batch may turn out to be of a different shade and this will be noticeable on the wall. The rest of the wallpaper can be added to the next batch. Thus, the production is waste-free.

How to apply liquid wallpaper

In the process of applying liquid wallpaper, you will need: a plastic float with a narrowed blade, a construction trowel, a spatula, a spray gun.

The application process is easy to perform on your own, guided by the following instructions:

pick up the solution with your hands or a spatula,
apply it to the wall and rub it on the surface with a thickness of 3 mm or less, if required by the instructions supplied with the mixture,
apply the mixture in small portions, as if folding a puzzle, applying a new mixture close to the applied one,
once the whole piece is filled, dampen the grater and go over the entire surface to eliminate bumps.

The mixture remaining after completion of the work can be dried and put away in the pantry, if necessary, get it, dilute with water and apply.

Summarizing

In conclusion, the following conclusion can be drawn:

the use of liquid wallpaper on the ceiling and walls does not require preliminary preparation of the walls,
due to the density of the mixture, imperfections and surface defects are effectively hidden,
wallpaper is used as a putty when sealing holes or crevices that occur between the plinth and the wall, at the locations of platbands, switches, etc.
you can use wallpaper to align the corners,
for use in new buildings - this is an ideal option for wall decoration,
during deformation and shrinkage of the walls, the wallpaper does not crack,
easy to clean, you can use a vacuum cleaner, a damp sponge or cloth with stain removers,
damage to the wallpaper is easy to repair, having some stock after finishing.

Wide range of various options wallpaper allows you to realize any design solutions and then enjoy the result.