wells

How to close heating batteries with decorative material. How to hide a nondescript radiator and transform the interior

Electrical wiring, heating, water supply and sanitation systems, hoods and ventilation can spoil the interior of an apartment or house if not hidden from view. When building or carrying out a major overhaul of the premises, it is worth planning in advance where numerous pipes and batteries can be hidden. There are many ways to hide the radiator. In this article, we will analyze each of them in detail.

How to hide the radiator and keep the level of heat dissipation

Choosing creative options for disguise heating system, you need to keep in mind that it should not only be stylish and fit into the overall design project, but also fully fulfill its original function - to heat the room. When considering ways to decorate a radiator, pay attention to the following points.

The task of any battery is to maintain the necessary temperature regime indoors through the following methods.

The first is infrared radiation. based on the transfer of heat directly to heated objects. If you get close to the battery, you will feel such heat radiation.

The second is convection., the essence of which is to heat the room and move warm air up, and cold air down. The circulation of air contributes to the uniform heating of the room.

Therefore, it is important to consider that any way to hide the batteries completely or partially blocks the full operation of the heater. For example, a glass screen on a radiator prevents infrared radiation from working, as the glass prevents heat from penetrating beyond it. The fewer holes for air circulation on such a screen, the more noticeable the heat loss.

It is strongly not recommended to install airtight boxes without any gaps, because. they do not allow warm air to rise. Therefore, in order to preserve the original functions of the radiator, decorate it better panels from big amount holes, like a grid with large cells.

The next thing to pay attention to is maintaining access to the battery and pipes. At the most inopportune moment, they can leak (due to installation errors, manufacturing defects or other reasons). For quick troubleshooting, you will need to repair work or even remove the radiator, replacing it with a new one. Therefore, it is important that the screen can be easily removed.

Ideally, the battery cover should provide access to the heatsink at any time without the use of special tools. It is recommended to at least install a “revision” (plastic door) that provides access to the junction of the pipe with the battery. Most often, problems arise in this place.

Thus, when choosing a radiator decor option, in order not to reduce its heat transfer, you need to keep in mind the following:

Warm and cold air must circulate freely in the room. The fewer barriers, the more evenly the room warms up.

It is necessary to provide access to the radiator at any time. Make a special window or hinged door at the junction of the battery with the pipe.

All adjusting elements of the heating system must be freely accessible.

How to hide radiators in the interior, taking into account the design of the room

Many of us are unhappy with how the batteries look in the apartment. Even a diverse range of radiators in all shapes and colors does not solve this problem. Everyone uses their own ways to hide unsightly batteries.

It is worth noting that the screen (box, panel) not only allows you to disguise the radiator in the house, but also performs a protective function - it isolates a dangerous hot object with sharp corners from small children.

The task of decorating heating appliances and pipes can be solved in different ways, depending on at what stage (major or minor repairs of the apartment) it arises.

If global changes (re-planning, overhaul, etc.) are planned in the room, then this is a great opportunity to replace old batteries. You can install more stylish, suitable for new interior heating appliances. In this case, you don’t even want to hide them, and the heating capabilities of the radiators will be used to the maximum. For design projects of apartments in the classic Victorian style, heavy cast-iron radiators with several sections are ideal.

If changing plumbing and pipes is not included in your plans, there is different ways how to hide a heating radiator in an apartment.

Painting

The easiest and most budgetary way to disguise a heater is to paint it to match the interior (wall, sofa or closet next to which it is located). To do this, you need to use a special paint with high heat resistance. This method is suitable for rooms in which the batteries fit organically into the common space.

Hinged screen

One of the most common ways to hide radiators in an apartment is with a screen, panel or grille.

The screen is a simple, but at the same time not the most beautiful way to hide heating appliances in the house. It does not require special installation and installation. The hinged screen can be made at home. You just need to hang it on the radiator. The disadvantage of this method is that water pipes remain in sight.

The hinged panel, performing a decorative function, keeps the efficiency of the radiator almost at the same level. Most often, panels are made of light metal alloys, so they can make ringing sounds if they are touched. These panels are inexpensive and easy to install.

Grilles meet the safety requirements for families with small children - they have rounded edges.

Panels, screens and gratings are divided into two types: for one-sided and two-sided piping.

Glass screens

One of the current trends in interior design is the use of glass screens to mask radiators. They are made from durable refractory material. Photo printing, stained glass drawings and other images can be applied to such screens. Usually glass screens are made in special workshops to order. Their price differs significantly from the cost of conventional hinged panels and gratings. To install the screen, you need to make several holes in the wall near the radiator. Further, with the help of screw holders with flexible rubberized gaskets, it is attached to the wall. If you have the appropriate tools (punch and screwdriver), you can install such a screen at home yourself.

There are different ways to decorate the glass surface of the screen:

Photo printing. This is one of the most common tricks. You can use any images you like (your own photos or pictures found on the Internet) for printing on glass.

Glass can be painted with acrylic or any other paints intended for working on glass. A great alternative to expensive stained glass. It is quite budgetary, and you can do everything yourself. You only need special paints that can be found in any art store.

An interesting effect can be obtained in the process of sandblasting.

original version created using fusing. This is a technique for obtaining an image by sintering pieces of glass in an oven.

The screen will look unusual, in the manufacture of which it is used cut glass. The picture is created by connecting the faces into a single image.

You can decorate the glass screen at home. On plain glass using rhinestones of different sizes and shades and special glue, you can create a unique masterpiece, which will not only disguise the radiator, but will also become an independent element of interior decoration.

Decorative screens for radiators

Typically, batteries in a house or apartment are located under the window. In this case, unsightly water pipes can be hidden behind decorative panels or screens. It is one of the most popular and simple ways disguise of heating devices. There are many options for how to do this.

Screen decoration can be very diverse: simple lattice, geometric or other patterns, carving, forging, etc.

In addition to the decorative function, screens also have practical benefits: they reduce infrared radiation from radiators and even increase the efficiency of space heating. Hidden radiator hidden behind such a screen does not need to be washed every week. It is enough to periodically wipe the dust from the decorative panel itself.

If you place the radiator in a niche, and above it - a spacious window sill, this space can be used as a desktop or a place for cooking.

Frame made of wooden beams

Wooden frames, masking radiators, harmoniously fit into any interior. They will look very organically in an apartment with wooden parquet and furniture. These frames are very functional. Depending on their size, they are used as a rack, table, shelf, seating and relaxation. Visual performance can be completely different. If you have been thinking about the question of how to hide a heating radiator with your own hands for a long time, make such a frame yourself.

Action plan for creating a wooden frame for a hidden heating radiator:

Carefully measure the heater.

Make wooden blocks of the appropriate size.

Assemble the frame from sawn blanks, check for strength.

Braid the base of the structure with a special tape or wooden slats.

Apply varnish to protect the surface of the frame from moisture.

Stretch fabric screen

A fabric or paper web is stretched over a wooden or metal frame, usually in one color scheme with a nearby wall. Then such a design is installed in the same way as a conventional screen.

A fireplace will add coziness to an apartment with any design.

Masking radiators with drywall

Sometimes there is no other way out but to hide the heating radiator with drywall. This material makes it possible to produce the most non-standard designs. It should be borne in mind that if a solid sheet of drywall is used to mask the battery, it is necessary to make holes in it to ensure the movement of air in the room.

Designers offer very original ways to hide heating radiators in a private house or apartment, fitting them into the interior: batteries are made to order in the form of a decorative panel and mounted on the wall. Such a heating device will become an independent piece of interior decoration, retaining its original functionality. It is not necessary to use the same bright options in order to hide the heating radiator, as in the photo. You can order a more concise model that will perfectly fit into your interior.

The design of the kitchen is perfectly complemented by a minimalist radiator, made in the form of a metal board that can be hung on the wall. With the help of magnets on such a battery, you can attach notes, a calendar, photos and other information that you want to keep in front of your eyes. This radiator is very easy to maintain.

Plastic grids

Inexpensive options for decorating heating devices that should only be used in non-residential premises. Poor quality plastic under impact high temperatures may release substances harmful to humans. It is recommended to place such gratings in utility rooms (storerooms, bathrooms, garages).

If you need to hide the radiator in a short time, but you are not ready to spend too much money on it, you can sew a curtain, make a fence, or just paint the heater in an unusual way.

Now you know how to hide the radiator in the best way. And in order to install it, bring pipes to it, and indeed, create a heating system, various plumbing materials are needed: pipes, fittings, tools, and so on. Buy them only from a trusted supplier. One of these suppliers is SantekhStandard. Cooperating with "SantekhStandart", you get the following benefits:

quality products for reasonable prices;

constant availability of goods in the warehouse in any quantities;

conveniently located warehouse complexes in St. Petersburg, Moscow, Novosibirsk and Samara;

free shipping in St. Petersburg, Moscow, Novosibirsk, Samara, including to transport companies;

delivery of goods to the regions by any transport companies;

individual approach and flexible work with each customer;

discounts and various promotions for regular customers;

certified and insured products;

trademarks registered in Russia, which is an additional protection against low-quality fakes.

SantekhStandard specialists are ready to help both individuals and companies. All you need to do is call:

A popular battery masking solution

The most common way to hide the battery is to sew up the wall with drywall. This method has its advantages (quick, easy and inexpensive) and disadvantages (reducing the area of the room). It is also necessary to pay attention to the fact that, without having practical knowledge and experience with drywall, disguising batteries can be a real torment. It should be remembered that it is not recommended to completely cover the heating devices with drywall. To ensure proper air circulation, slots are made in the material, which are subsequently closed with special decorative screens. The use of such screens also helps maintain radiators.

The advantage of drywall can also include the ability to hide not only radiators, but also the pipes leading to it. Along with this, it is more expedient to sew up the entire wall with material during the repair of the entire room.

How to hide the battery - easy and simple!

An easier and less expensive way is to close the batteries with a hinged screen. Today there are a huge number of different models:

hinged screen with cover;
box screens;
metal screens;
wooden screens;
screens from MDF;
glass screens.

Hinged screens will help to hide the batteries when the repair in the room has long been completed. Installation of such models does not require special knowledge and effort, they are installed by hanging on the battery. The hinged screen does not interfere with air circulation and heat exchange, performs a decorative function and greatly facilitates the maintenance of the heater. Such screens are produced with the expectation of two options for piping - one-sided and two-sided.

Box screens most often used to mask batteries installed in halls and along blank walls. Such models perform not only a decorative function, but also serve as an excellent piece of furniture. They can be used as small shelves on which you can put cute trinkets, and if you have a cat in your house, believe me, the surface of such a box will become her favorite resting place during the cold weather. The boxes differ in size, so if you have fairly low radiators, use small-sized products that can easily be turned into cozy and comfortable benches. They can also be finished using various techniques, such as openwork carving, decorative overlays, and the possibility of applying any image to the front of the box, the main thing is that such a screen does not disturb your interior, but becomes a real addition to it.

Metal, wood and MDF screens for batteries can also be made in the form of a box or have a flat shape, which is ideal for disguising batteries built into niches or hidden by drywall. Screens offered today have original design- these are carvings, drawings and forged decorations, thanks to which you will not only hide radiators, but also save the interior of the room.

How to hide the battery - an original approach

Don't feel like installing screens and fiddling with drywall? Show off your creativity- visually dissolve the battery in the interior. Paint the radiator the same color as the walls, or vice versa - make the radiator the main highlight of your room. Today you can use the services of a printing company that will apply your chosen image on self-adhesive paper - later you can easily place it on a radiator and make your interior unique. You can paint the batteries yourself - someone draws colored pencils there, someone gives the batteries the color of their favorite animal, and someone prefers to capture their favorite flowers and patterns on it.

Needlewomen can experiment with different textures and shapes, giving the batteries original look. Today you can easily find workshops on decorating heaters with various covers in the form of animals, you can also use the remaining yarn and wrap the battery around it (it is not at all necessary that the yarn be exclusively of one shade).

If you know how to work with beads and beads, prepare a frame to fit your battery and create an original bead curtain or braided bead curtain that you attach to the frame.

Everything is in your hands and completely depends on your capabilities!

How to hide the battery - photo

You also need to close the radiators correctly. Aesthetics is, of course, important, but in a cold room you will not be up to beauty. Therefore, it is also necessary to consider all options from a technical point of view. This will be discussed below: how to close the heating radiator and not greatly reduce its efficiency. The task is not easy, but doable.

How to properly close the battery in terms of maintenance

Radiators, like heating pipes, need periodic maintenance. They sometimes start to flow, get clogged, it is sometimes necessary to bleed air, etc. And all because far from an ideal coolant flows in our networks. In addition, the quality of some modern heating devices is far from being a standard. All this leads to the fact that sooner or later leaks appear.

More often they appear in places where sections of radiators are joined, or where pipes are connected. To ensure the tightness of the joints, there are gaskets; over time, they lose their elasticity or collapse. All these places should be freely accessible.

From all that has been said, it follows that you need to close the battery so that you can quickly access it. The best way- an attached structure that is not “tightly” fixed to the wall. If you are concerned about safety, make a lock: you can install a bracket on the wall, on which the heating screen will be hung. Any other fastener that will ensure quick dismantling will do.

How to slightly reduce heat transfer when installing a screen

The task of batteries is to give off heat to the air. And this happens in two ways:

Heat transfer by convection occurs when the air, passing by the heated section, heats up itself. To improve the movement of air on modern heating devices, special air ducts are made. But their presence is not a guarantee of good heat transfer. You still need free access and outflow of air. Only in this way will air pass through normally, and carry heat around the room. This means that you need to close the battery in the room so that nothing interferes with the outflow of air from above. Ideally, there should be no barrier from above. There is already a window sill. The second obstacle will immediately reduce heat transfer. But if there is still some kind of horizontal cover, it should be with a large number of holes. And the holes should occupy at least 40% of the surface, and preferably 50-60%.

But that's not all. From the bottom, there should also be a sufficiently large distance from the floor to the screen. Cold air must pass through this slot and rise up along the battery section, heating up along the way. The size from the floor to the top edge of the screen is 8-12 cm. The best option is the presence of legs. The worst, but acceptable, are large holes or significant perforation (many small holes).

Thermal radiation occurs in the infrared range. For him, any obstacle is already a loss: the rays are reflected and scattered, never reaching the middle of the room. Therefore, it is desirable to put the screen in front of the radiator again with a large number of holes.

Even if all these requirements are met, the heat transfer of the batteries will decrease. And you need to be ready for this. If you're just planning a system, take note of this and take a couple of extra sections. They will make up for the loss.

Using all the same properties of thermal radiation, heat transfer can be increased. The first remedy is to attach a layer of foil behind the radiator, or better, a foil-foamed heat insulator. If only foil is hung on the wall, the amount of heat going into the wall will decrease by a factor of 5. It will be reflected towards the room, where it will really become warmer. But if a thin heat insulator is attached to the wall, on which foil is applied (the surface should be smooth and shiny), then heat loss will decrease by 20 times. And this is only from a piece of heat insulator. But only one nuance: just putting it on will not make any sense. Needs to be attached to the wall. And at the same time, there should be a distance of at least 2-3 cm between the wall and the rear wall of the radiator. Then the reflection of thermal radiation will be effective.

The second remedy is also simple, but effective. We know that dark matte surfaces absorb heat well. And it can be used. Paint the back of the battery screen dark. Part of the heat radiation will be absorbed by it, and then transferred to the air in the room. If you still cover the battery with a screen, then you need to do it correctly with the least heat loss.

And there's more design features, which will help during installation to increase heat transfer, and not reduce it. To do this, you need to properly position it. How, see the diagram.

How to close and how

From all of the above, it follows that a plastic material with a good heat transfer coefficient is needed. Metal immediately comes to mind. And indeed it is. Properly done, it may not lower the temperature in the room, but increase it: the heat transfer area increases. But copper has the best heat transfer (silver does not count) and aluminum. If you close the radiators with perforated screens made of these materials, you will definitely not freeze. Metal screens fit best into kitchen interiors, they can also be suitable for rooms, but decorated in high-tech style.

Metal screen - not the most attractive, maybe, but with the best heat dissipation

If forging fits into the room in style, then you can make a forged lattice, and use the battery itself as a contrasting background. Cast iron standard sections are not an option, but modern ones that are almost flat are a great backdrop. In this design, the heater will become an element of decor. This option is suitable for rooms or hallways. Such a decor will look much more harmonious if there is at least one more item, also decorated with forging.

Very attractive and. But not from the point of view of heat transfer - it is very bad for her, but from the point of view of plasticity. You can make beautiful patterns out of wood. Even a completely ordinary grille or slats look good already. In this case, it is not necessary to hope for an increase in heat transfer - it will certainly decrease, but if the holes are large enough, then a little.

Wood grille - a timeless classic

Screens for radiators made of MDF, fiberboard, OSB are also attractive. But already because of the relatively low price. You can beautifully close the battery with their help. There are good ready-made options, but if you are friends with a jigsaw and know how to use it well, you can get a spectacular screen. If you make sufficiently large holes, then the heat transfer will be normal. It is only necessary to use materials with an emission class of at least E1, and preferably E0. They are more expensive, but when heated, they will not emit harmful substances (and they will warm up throughout the heating season).

A combination of two materials can be a very good option. For example, on a perforated sheet of metal (at best, aluminum) is fixed decorative panel from wood or the same MDV. The option is very good. Both from the point of view of thermal engineering and from the point of view of design. The metal transfers heat well, and the decorative panel draws attention away from the battery.

Not the best idea is to hide the radiators under drywall. This material is an excellent thermal insulator. Good property, but not for this occasion. In addition, when it dries out, it begins to crumble and dust. The situation can be slightly improved. To do this, it will be necessary to pre-treat the drywall with an aqueous solution of PVA glue. First, walk on the surface with a special roller with spikes, make holes. Then coat the sheet several times with an aqueous polymer solution. After drying, it will increase thermal conductivity, it will not dust even when it dries.

But even from such drywall, it is not worth completely covering the battery with drywall. If you really need a niche, make it from a processed sheet, and a grate, for example, from wood or steel. But it must be removable. This will provide at least some access to the radiator. In general, it is better to make such a design that will be disassembled and assembled. For example, do not putty the corners, but close them with corners that are fixed on self-tapping screws. You can disassemble, although not very quickly, but not a monolith, which in which case you just have to break it.

Even less successful ideas are to close the battery in the room with PVC or other plastics. Their thermal conductivity is no better than that of drywall, but there is nothing you can do to help here. This option is most acceptable in the bathroom or in the kitchen. Here, both wood and metal will not feel the best way. Therefore, if you close the battery with plastic, then only there. The requirements are the same: there are as few obstacles as possible above and below, the plane is heavily perforated, the maximum free access for repair and maintenance.

There is another very modern and non-standard approach - a glass screen with printed photo printing. In terms of heat transfer, the option is very poor. Unless you make it from glass slats.

Results

When wondering how and how to close the heating battery, do not forget about technical requirements and heat dissipation. Firstly, it is necessary to ensure free convection, and secondly, good heat transfer. And you need to have access to maintain the battery in case of leakage or emergencies. To do this, all surfaces must be perforated to the maximum, and the screen itself must not be tightly attached to the wall.

Beauty at the expense of warmth

At overhaul rooms, of course, you can hide the battery in the wall using a niche made of plasterboard, chipboard or plastic. Ventilation of heat and its removal from the battery, in this case, is carried out through a grate, which must be arranged in such a niche. As a rule, such niches are decorated with a lattice made of chipboard or wood. It is possible to select both the lattice itself and its frame in the required color range. These grates are sold in a large assortment, they are durable and pass heat well.

Bench for reading over the battery

In addition, the issue of converting heating batteries can be solved by covering them with special decorative screens. Such devices can be installed directly in front of the heating radiators or carried out in a hinged form.

Hinged screen made of thin wooden slats

Plain wood grate painted to match the wall finishes

A hinged screen made of metal slightly reduces heat transfer, is inexpensive and easy to install

These solutions can not always be called optimal, since a very large part of the heat generated by the battery is wasted in this case. The effect is close to what would be achieved by hiding the battery behind the curtains.

Metal screen with openwork design

Any screen design must provide access to the heating battery

At the same time, closing the heating radiators has the function of protecting small children from burns. Screens, boxes and niches are beautiful, they can be matched to any interior. This type decor is used, as a rule, in living rooms and is an ideal stylistic solution for them. Closing batteries in children's rooms with boxes and screens is optimal solution both for safety purposes and for decorative purposes. A panel made of wood or chipboard can be decorated with bright patterns and used as a game element.

Screen idea for high battery

An old wooden bench in the role of a battery box in the hallway of a village house

Requirements for decorative elements

At the bottom there must be a gap of at least 8 cm for the circulation of cold air

Before hiding the battery, it must be taken into account that there should be no obstacles for the circulation of heated air from above, below and on the side. Therefore, boxes and shield screens are usually equipped with gratings.

The distance from the floor to the edge of the decorative element is also important. It should be at least 8 cm. Through this gap, cold air rises up along the radiator section, heating up along the way. If the gap is closed, heat transfer will be disturbed.

It is worth considering the formation of dust on screens and boxes during convection. For this reason, you need to select a product from a material that is easy to wet cleaning.

The decorative overlay must be resistant to long-term exposure to high temperatures.

How to hide a pipe

Open pipe masking method

Sometimes it is required to hide not only the radiator itself, but also the pipe sections connected to it. For this, different methods are used:

Open way. The fastest. The pipes are painted in the color of the walls, which makes them almost invisible. The idea of \u200b\u200bdecorating with improvised material can also become interesting and original, for example, painting a heating element in the color of a tree and fixing twigs on it.
Hidden stretch. The pipes are hidden in the strobes in the wall and covered with a cladding. The downside is that in the event of a breakthrough, the skin will have to be opened, so this method is absolutely not suitable for old wiring.
Packing in floor screed. A similar method of laying the highway is suitable if the concrete layer has not yet been poured. It also requires labor-intensive opening in case of an accident, so you should keep a plan for laying communication lines in case the heating system is repaired.
Closing with a wide plinth. This is possible if the heating pipes run along the floor. If there is a similar arrangement of the heating circuit in the bathroom or in the kitchen, you can make a structure that looks like a staircase and decorate it with tiles.

A good option is to use false walls. Anything can be hidden behind a decorative partition, including heating elements. But the false wall must be quickly dismantled so that free access can be provided in the event of an accident. The easiest way is to create a frame bulkhead from a bar or metal profile and sew it up with drywall, plastic or plywood. It is useful to set hatches with flaps at the places where pipes are connected to the heating device and where couplings and tees are located. Well, if the area of \u200b\u200bthe room allows you to install decorative coating not close to the battery, so that it does not get very hot and does not release potentially hazardous substances.

Knowing how to decorate pipes or radiators in an apartment or in a private house, you can easily solve the problem of disguising an engineering interchange. Decorative overlay will improve appearance without reducing the efficiency of space heating. Also, a beautiful screen will allow you to get rid of long, dust-collecting curtains in favor of modern rolled or Roman paintings.

Using special screens

The screen for the battery must match the design of the room and pass heat well

To close the heating radiators in a house or apartment, you can use decorative screens. Choose the one that suits you according to two parameters - design and material of manufacture.

Design features

Masking shields are classified according to the method of fastening to batteries. According to this principle, box screens and hanging products are distinguished.

The decorative box consists of a frame with a large-mesh grating on the front side. Such products are used when it is necessary to hide the unaesthetic appearance of the battery, and sometimes the pipes of the heating circuit. The boxes are installed along the windowsill or cover only the radiator. They can be equipped with opening doors, which facilitates cleaning and temperature control of the coolant.

Hinged lattice screens are of two types:

models in the form of a horizontal panel located on top, with a decorative grille built into it;
options consisting only of the front part, which are called shields.

The first option is used to hide radiators located in niches or not covered by a window sill on top, and installed directly on the battery.

Wall-mounted flat screens are often placed on radiators under a window, not covered by a window sill. They are also used to hide batteries installed in niches.

Production material

plastic screen

To choose a decorative element according to this indicator, you need to consider characteristics material.

To mask the batteries, screens made of the following materials are used:

metal;
wood;
glass;
plastic.

To close ugly radiators, most often apartment owners prefer simple metal boxes. white color. Such options can not be called exquisite, but they are inexpensive and give off heat well. If strength and appearance are important, and cost does not matter, it is better to opt for a stainless steel product, which has a long service life and aesthetic design. Typically, these decors are used to hide cast-iron radiators.

MDF is the most practical and inexpensive material that has all the advantages of wood and at the same time is not afraid of moisture and temperature changes. Screens made of such material are less prone to deformation and curvature. On sale there are openwork options from MDF.

Glass panels for heating appliances stand out for their maximum design variability. They are made entirely of glass or with the addition of other decorative materials. The location of the corners must be such that they cannot be injured or caught on clothing. Usually drawings, patterns are applied to the surface of the product. To prevent the glass from breaking or scratching it, it is covered with a laminate. In addition to laminated glass, triplex or acrylic is often used.

Plastic screens are the cheapest, but at the same time dangerous option. The shield undergoes deformation from the heat of a hot radiator and releases harmful components into the air. It is undesirable to use such screens where people stay for a long time.

Screen for battery

Screens are the most various forms and are made from several basic materials. The most popular are metal, wood and glass. Screens made from each of these materials have their own characteristics, advantages and disadvantages. If we talk about metal screens, then their use has a very good effect on heat transfer from the battery.

In the photo above you can see an example of the placement of such a hinged screen of a mesh type.

It is very important to always understand when closing the heating battery that this reduces the efficiency of its work, and, accordingly, increases the cost of energy resources during the heating season. And metal structures made of such meshes prevent the spread of warm air around the room to the least extent, and therefore are recommended for installation if heating costs become a significant figure in the family budget

If a grid on the wall instead of a battery doesn't seem like a good idea, then you can look for screens made of solid metal sheets with drawings made in them. These images are cut into the surfaces of the screen and make it permeable to warm air currents. Variations of drawings can be very different and it will not be difficult to choose a picture suitable for your interior.

The second after metal in terms of heat transfer efficiency is a glass screen for a radiator. It is installed on special fasteners, which are closed with metal tubes.

The most important advantage of this option of hiding the battery is that absolutely any picture can be depicted on the glass. Manufacturers actively use this feature of the material and place the most incredible images on glass screens.

Here we are not just talking about covering an unsightly element in the interior of a room. Such a screen will be a great addition to the design of the room in almost any style and can even create a separate unique accent in one place or another in the room.

The next way to decorate the batteries is to install a wooden box in the place where they are placed. Such a box can be completely different forms and colors, and functional purpose can even hide the fact that there is a battery on the wall.

After viewing these examples, it becomes clear how successful the idea of \u200b\u200bdisguising a radiator as a piece of furniture can be. Below are a few more options for boxes made in the natural color of wood, which look great in the interior and, in addition to the task of closing the radiator, perform a certain function.

one more in a good way To remove the batteries from your eyes can be the sharing of a wooden screen with a window sill. With proper space planning, this bundle can be used to accommodate several house plants, or to arrange an additional resting place on the windowsill.

And in conclusion, ideas for decorating a radiator without closing it. It is not necessary to completely hide the battery, you can include it in the interior elements if you correctly use the shape of the radiator in the process of decorating it.

When choosing a design for closing the battery, try to always have air access to it from below, and top cover was equipped with ventilation holes. The air in the room moves along the radiator from the bottom up and this process ensures efficient heat exchange in the room. The cooled air comes to the battery from below and in the process of heating rises along its body upwards. Therefore, when installing a decorative box or screen, always remember that, in addition to the aesthetic component, its shape must take into account the peculiarities of the heat exchange processes in the room.

The best solutions for the kitchen

The design of kitchens, not as strict as is customary for living rooms, gives free rein to imagination. In addition to the above methods of hiding radiators, in rooms where culinary masterpieces are created, design delights are also created to decorate heating radiators. The battery and the pipe connecting it to the heat source can be painted in the color of the walls, decorated using the decoupage technique, or you can combine these two methods.

A battery painted to match the walls will be less conspicuous

Even more effect can be achieved if you paint the battery to match the wallpaper

The battery can be flaunted by making it part of an artistic composition

Lots of ideas are available on the web. Taking them as a basis, you can create a masterpiece yourself and without any special labor and time costs by decorating the external elements of the heating system with an elegant or cheerful pattern. Battery decoupage is the transfer of a pattern from a medium to a metal surface of a radiator. When decorating using decoupage technique, batteries can be decorated using ready-made drawings made on thin paper (both rice paper and ordinary decorative napkins are suitable). There are a lot of design options: flowers, wood decoration, geometric patterns.

Khokhloma painting on the radiator

If you have artistic abilities, then you can do without ready-made solutions and apply images with paint directly to the surface. For such work you will need heat-resistant paints and varnish. The latter is necessary for those who decide to decoupage the battery on their own. For decoupage, you will also need glue, regular PVA will do.

Common ways to disguise

The presence of any problem always leads to its solution, and disguising radiators in apartments is no exception. Designers and builders have developed several solutions to this problem. Consider the most popular of them:

One of the most common ways to solve the problem than to close the radiator is to install a metal screen. Usually these screens are mass-produced, but are made for certain types of radiators. Their advantage is high heat transfer, durability, the absence of the slightest deformation under temperature effects, as well as low price. But the minus, probably, covers all the pluses of this type of disguise, since this screen can hardly be called beautiful.

Metal screen for heating battery

You can solve the issue of the aesthetic component after the purchase of such a screen: it is quite feasible for creative people to decorate or paint a metal screen on their own.

Another method to disguise a battery indoors is to install a wooden screen. To make such a model that masks the radiator in the house, a woodworker can order it. The ideal option would be to make a screen that resembles the furniture in the room in style and shape.

Wooden screen for a heating battery in the interior

Most often, lattice screens or braided screens are made of wood, which cover the battery from the eyes, but pass heat well. Such screens are not cheap, especially if they are made to order, but they look very impressive, besides, they are an additional place to sit or place some items: toys, decorative items, vases, etc. The disadvantage of wooden screens is that under the influence of high temperatures they can be deformed. You can create a wooden screen model yourself by first measuring the area of the radiator and its thickness.

Screen-lattice for a radiator

The next option to close the battery is plastic screen. It is relatively cheap, but it is sometimes noted that under the influence of high temperatures, some types of plastic can release toxic substances, so it is better not to risk it and choose another way to hide the radiator.

Decorative plastic screen

Another common method than to close the radiator is custom-made furniture or built-in furniture. It can be a chest of drawers that hides the heating system, a long bench or a console table that hides the radiator. The only thing when you plan such furniture with the master is to provide for the heat to be able to penetrate into the room. To do this, you can make carved cabinet doors or carved vertical surfaces.

The heating battery is built into the furniture

As an option, you can consider the manufacture decorative fireplace in place of the battery, which will be not only decorative, but also a real warm cozy place - a kind of hearth in the room.

Simple ways to shelter from the snow and rain of the summer veranda

Usually, in the meaning of the veranda, there is an additional area of \u200b\u200bthe house or cottage, which often plays the role of a balcony or an open area.

Quite often it is something like a greenhouse or winter garden. Often the veranda is an additional extension of the cottage.

To date, few standard projects provide for the construction of a veranda simultaneously with the construction of a house. For this reason, many build verandas on their own.

Most often, such a design is already a closed roof or canopy, since enjoy fresh air and the landscape is much more comfortable when the hot rays of the sun do not shine from above and the rain does not drip.

Sometimes it all starts with the creation of a similar site or simply an attempt to expand the living space. Open verandas look extremely tempting in the summer, they allow you to have a good rest and enjoy the freshness of nature.

However, with the onset of colder evenings, its use becomes extremely difficult and inconvenient.

That is why many resort to such solutions as closing verandas from adverse factors and even insulation, which provides this building with the actual status of part of the house.

Today, there are a large number of ways that allow you to close the veranda from a wide variety of adverse natural phenomena.

In addition, it is better to think about the possibility of insulating the veranda at the stage of initial construction. The subsequent alteration of the basic project into an insulated one may require additional costs and be much more laborious than the initial design.

How to hide a battery of disguise ideas

A popular battery masking solution

The most common way to hide the battery is to sew up the wall with drywall. This method has its advantages (quick, easy and inexpensive) and disadvantages (reducing the area of the room)

It is also necessary to pay attention to the fact that, without having practical knowledge and experience with drywall, disguising batteries can be a real torment. It should be remembered that it is not recommended to completely cover the heating devices with drywall

To ensure proper air circulation, slots are made in the material, which are subsequently closed with special decorative screens. The use of such screens also helps maintain radiators.

How to hide the battery - easy and simple!

An easier and less expensive way is to cover the batteries with a hinged screen. Today there are a huge number of different models:

hinged screen with cover;
box screens;
metal screens;
wooden screens;
screens from MDF;
glass screens.

Hinged screens will help hide the batteries when the repair in the room is long overdue. Installation of such models does not require special knowledge and effort, they are installed by hanging on the battery. The hinged screen does not interfere with air circulation and heat exchange, performs a decorative function and greatly facilitates the maintenance of the heater. Such screens are produced with the expectation of two options for piping - one-sided and two-sided.

Box screens are most often used to mask batteries installed in halls and along blank walls. Such models perform not only a decorative function, but also serve as an excellent piece of furniture. They can be used as small shelves on which you can put cute trinkets, and if you have a cat in your house, believe me, the surface of such a box will become her favorite resting place during the cold weather. The boxes differ in size, so if you have fairly low radiators, use small-sized products that can easily be turned into cozy and comfortable benches. They can also be finished using various techniques, such as openwork carving, decorative overlays, and the possibility of applying any image to the front of the box, the main thing is that such a screen does not disturb your interior, but becomes a real addition to it.

Metal, wood, and MDF battery screens can also be boxed or flat, ideal for concealing batteries built into niches or hidden by drywall. The screens offered today have an original design - these are carvings, drawings and forged decorations, thanks to which you will not only hide the radiators, but also save the interior of the room.

How to hide the battery - an original approach

Don't feel like installing screens and fiddling with drywall? Show your creative qualities - visually dissolve the battery in the interior. Paint the radiator the same color as the walls, or vice versa - make the radiator the main highlight of your room. Today you can use the services of a printing company that will apply your chosen image on self-adhesive paper - later you can easily place it on a radiator and make your interior unique. You can paint the batteries yourself - someone draws colored pencils there, someone gives the batteries the color of their favorite animal, and someone prefers to capture their favorite flowers and patterns on it.

Needlewomen can experiment with different textures and shapes, giving the batteries an original look. Today you can easily find workshops on decorating heaters with various covers in the form of animals, you can also use the remaining yarn and wrap the battery around it (it is not at all necessary that the yarn be exclusively of one shade).

If you know how to work with beads and beads, prepare a frame to fit your battery and create an original bead curtain or braided bead curtain that you attach to the frame.

Everything is in your hands and completely depends on your capabilities!

How to close batteries correctly technical rules and tips

Before closing the heating battery, it is necessary to take into account several technical nuances:

Keep in mind that the heat transfer of a closed radiator is reduced in any case, no matter which masking method you choose. The main thing is that the change should not be significant. Ideally, the decrease in air temperature in the room should be about 1-1.5 degrees.
Before closing the battery, put it in order: blow, rinse (this is done at the end of the heating season) and paint.
Keep in mind that the denser the weave of the grille, the better it masks the radiator, but the worse it conducts heat. Therefore, when choosing a screen for a battery, try to look for a middle ground or rely on heat saving.
To minimize heat loss, the screen can be placed on legs, and a groove can be cut in the center.

When closing the radiator, it is very important not to block convective air currents, otherwise it will blow in the room, and the windows will start to fog up, which will eventually lead to mold on the walls. Ideally, the visor of the window sill should protrude above the battery by no more than 30 mm, the top and bottom of the battery should be as open as possible.
There must be a distance of at least 35-50 mm between the battery and the screen

There should be a gap of about 60-70 mm from the radiator to the floor and to the window sill.
To solve emergency situations, it is necessary to provide free access to the radiator. For example, the grate of the box can be removable, folding (see photo), opening on hinges or retractable on profiles.

Making a battery in the bathroom

Not every bathroom has separate batteries, except for the one that acts as a heated towel rail. Modern products are quite aesthetic. The need for decoration arises if the battery has not been replaced for a long time, as a result of which it has lost its appearance. The easiest way to give the heater a presentable appearance is to paint it. The color of the paint is selected according to the color of the room. Of course, the product to be painted is thoroughly cleaned. However, decoupage in the bathroom is just as appropriate.

An example of the successful use of the battery as a bright accent

In addition, it is possible to close the battery in the bathroom with a grid, which can act as a storage system.

Protective screen with storage shelves

The battery can be hidden in a stylish locker

Or leave it in plain sight, covering it with a shelf on top

Summing up, it should be noted that decorating a heating battery is a creative process. When choosing a way to transform heating radiators, the main thing is not to overdo it with decorative elements, maintaining the general style of decorating the room.

It is also important to take into account that the main functional purpose of the radiator should not be affected - heating the room in the cold season.

They decorate both old cast-iron batteries and modern products made of aluminum and bimetal. The latter are especially pliable for drawing drawings, since external design consists of flat plates, on which it is convenient to apply a pattern.

When choosing a color, you should remember that special paints are produced for heating radiators that can withstand high temperatures.

Modern interior design involves the use of various decorative elements in a house or apartment. Moreover, very often decorative elements are used in order to eliminate shortcomings in the premises or hide devices that have an unsightly appearance. These include heating appliances, because of which the entire interior design as a whole suffers. Therefore, you need to know how to properly close the radiators and at the same time minimize heat loss.

Hide all the flaws of the battery, creating an aesthetic beauty in your home

Important conditions

It is clear that no matter what method is used, in any case, heat loss is inevitable. Therefore, before closing the battery First, you need to take into account several important conditions:

Air flow must be free to circulate. Fulfillment of this condition will allow not only to evenly warm the air in the room, but also help prevent fogging of the windows.
All taps and heating fittings must be freely accessible for various repairs.

Both conditions can be easily met if you listen to experts who advise using removable devices or designs with special windows.
From this video we will learn how to close the batteries:
Basic ways to hide radiators
If at the construction stage, for some reason, the batteries were not hidden in the walls, then in order for the radiators not to spoil the appearance of the room, it will be necessary to disguise the heaters. But not everyone knows how to close the battery in the room so that it is beautiful and convenient. There are many ways to help cover radiators:
hinged screen. Such a device has significant advantages. Firstly, the installation of the screen is very simple, and even a non-professional can handle it. Secondly, the design features allow free circulation of warm air. And thirdly, hinged screens are completely safe due to their rounded corners. And safety is paramount, especially for those who have children.
wooden frame . Any wooden decor element looks noble, rich and elegant. The same can be said about wooden frames, which will fit perfectly into almost any style of the room. A wooden frame looks especially stylish in combination with furniture made of the same material. Depending on the design, the wooden frame can be made in the form of a shelf or a rack. The only disadvantage of this method is that the device can deform over time from exposure to high temperatures.

Wooden frame - the easiest and most economical way to hide the batteries
glass screen. The method is considered one of the most original, because photo printing or various drawings can be applied to glass. But at the same time, you will have to pay a decent amount, so this method is not so common among the population. And for those who still decide to close the battery with a glass screen, it is worth remembering that such material will almost halve heat transfer.
Built in furniture. One of the most original ways is the disguise of batteries using furniture (chest of drawers, cabinets, shelves, seats, tables, and so on). And since such furniture is mainly made to order, you need to be prepared for decent costs.
. The material, although it has a number of disadvantages, nevertheless gained great popularity. At the same time, most of all, of course, drywall attracts with its low cost. This material is ideal for sealing batteries under a window. But we must not forget that drywall constructions can suffer from external influences, it can easily be pierced by negligence. And also if a leak occurs, you will have to change the entire structure as a whole.

Drywall has a low cost, but do not forget about its flaws
Curtains. The simplest, fastest and does not require any installation work is the disguise of heating under curtains. Thanks to a large selection, you can find curtains on sale different colors and forms. And this means that for any interior you can choose the appropriate curtains. In addition, very often they are used to hide cast-iron pipes.
Painting. This method is used if for some reason other options cannot be applied. In this case, the batteries are painted to match the color of the walls.

A wide variety of ways allows you to disguise radiators in any room.

Design solution
It is possible to apply unique design methods. For example, the battery itself can be made an element of the interior having built around it a forged frame or any other product. And you can also close the heating radiators in the apartment for the fabric. And the material, in turn, should fit perfectly into the design of any room. One more interesting option, which allows you to hide the heating pipes, is decoupage and painting. This method is distinguished not only by simplicity, but also by the unlimited imagination of the owner of the apartment.
In any case, before deciding how to close the radiator in the room, you need to consider all the ways, weigh the pros and cons, and only then stop at one of the options you like. And for those who are not afraid of difficulties, it is worth considering the option of underfloor heating, in which batteries are not needed at all.