Faucets

Floor vase with your own hands. DIY high floor vase for flowers How to make a round vase with your own hands

Do you love flowers? The answer is obvious! Of course, they are an excellent home decoration in themselves, but in combination with an unusual vase, the bouquet will be simply excellent.

Let's learn how to make vases from cans with our own hands in this master class. Such vases not only diversify your interior, but also fit perfectly, for example, on a small breakfast table if you decide to please your soul mate. And if you accidentally picked a flower in the country or in the garden, but you don’t want to put it at home, a convenient vase from a bottle will help you out here too!

Vases from plastic shampoo jars

Have you thought about how to make a beautiful vase out of a jar, and consider it impossible? Scroll through the photos below and make sure that making a vase with your own hands is very simple, beautiful and very inexpensive!

We have identified 6 of the most popular and simple ways how to make a stylish vase out of a jar, these are: painting, glitter, decor with paper, canvas and lace.

Learn how to make a vase from a jar in the next tutorial.

A very simple and straightforward method is to apply glitter or glitter to glue or hairspray. This method is great if you need a festive vase or for New Year. Detailed non-application technique with a photo is in this article « «.

Festive vase with glitter

Great for a wedding

Method number 2: Wall vases from baby food cans

If several small jars of baby food, then they will make excellent wall vases. These vases are perfect for decorating your yard or garden!

wall vases

This vase is perfect for a balcony or garden.

We will need the following items:

Old shabby board;
Baby food jars;
Clamps for clamping jars;
Drill;
cogs;
A hammer;
Metal punch / screwdriver;
2 (or more) hooks;
Rope;
Brush with iron bristles;
Marker.

Vase making tools

Vase manufacturing technology

Step 1

We clean the board with an iron brush. Using a hammer and punch, make a hole in the clamps (if there is no punch, use a screwdriver).

The hole should be on the opposite side of the clamp tie.

Step 2

Take it one by one (most importantly, do not get confused if the jars are different) mark where you want to put the jars on the desk. Mark the drilling points with a marker and drill them.
Place the jars in the clamps and, until they are twisted, insert the screws into the holes drilled in the clamp, fasten them firmly into the holes in the board.

Step 3

Decide where you want to insert the fastener hooks and drill holes there.
Insert hooks into them, and tie a rope on them, with which you can hang the resulting craft on a terrace, fence or wall .

And the best part - all you have to do is decide which flowers you will put in your vases! You can, as in the photo, pour water into the upper ones and put petioles, and processes with roots into the lower ones.

Or you can generally light small round candles and carefully put them inside - in the late evening it will be especially nice to sit on fresh air and enjoy the lights. Just do not forget about fire safety!

Method number 3: Painting cans

The coloring of jars is the most popular way of decorating and it is not surprising, since it is he who can radically transform even the simplest jar into a beautiful and elegant vase:

What we paint:

Acrylic paints - easy to lay down and dry quickly and odorless.
Aerosol paints in a can - dry quickly and ensure smooth application.

A complete guide on how to paint a jar, read in this material " .

Master class: Vases from plastic jars

Stylish vases can be made from plastic jars, such as shampoo or balm. They look especially nice when there are several of them and are painted in 2 tons. Watch the detailed tutorial.

Prepare the following:

Plastic bottles of mineral water and/or detergents(carefully wash all chemicals out of them);
Adhesive tape;
Scissors;
Aerosol waterproof paint in different colors;
Hair dryer, sponge and oil (jojoba or sunflower);
Old newspaper.

vase tools

Coloring technology:

Step 1

We direct the flow of hot air from the hair dryer to the labels on the bottles. After 1-2 minutes, the paper should easily peel off the plastic..
Scrub the adhesive on the bottles with an oily sponge, then rinse with water. Rinse the detergent bottles again.

Heat the label with a hair dryer

Remove adhesive residue with a washcloth

Step 2

We cut the adhesive tape into thin strips (choose the width of the tapes as you wish) and randomly glue them onto the bottles. If desired, you can overlap the stripes on top of each other, forming patterns.
Run your fingers well over the entire glued tape, leaving no bumps or poorly glued areas.

masking tape or adhesive paper applied in stripes to the bottle

Step 3

Spread out an old newspaper and put a bottle on it, which you will paint first. With a spray can of paint, carefully, at some distance (otherwise the paint will be unevenly distributed and flow), start painting the bottle.

It is advisable to paint outdoors, but if this is not possible, paint in a well-ventilated room.

Let the paint dry for 1-2 hours.

Removing sticky tape

Step 4

Wait for the paint to dry completely and carefully remove the adhesive tape. You can pour water into the resulting vases and put flowers in them.

Even more IDEAS: - Master classes with photos here

Master class: Multi-colored vase with acrylic

This bright vase will delight you with its elegant look!

Modern vase from a jar

Take the following:

Any glass jar;
Acrylic paints (3 or more colors);
Old newspaper.

We take milk or acrylic paint

Step 1

Remove the label from the jar.
Spread out an old newspaper, put a jar upside down on it. Slowly start pouring paint into the bottom of the can; the paint will start to flow along the walls - as it should be.
Watering, for example, with white paint, take paint of a different color and pour directly over the previous, thus mixing them together.
Thus, make a layer of all the paints that you have prepared.

Pour several layers of paint one after another

Step 2

Leave yours to dry vase within 2 days. Even if after a few hours it is dry when touched, the inside of the paint has not dried and if the dry layer is damaged, it will leak out.

In this master class, you learned how to make cute decor items for your home out of plain useless jars. With fantasy, you can make even more unusual vases for colors suitable for different rooms your home, and if you master this business to perfection, you can make vases even for gifts to relatives.

Let dry for 2 days

Everyone is pleased to receive a cute and useful little thing for the home, and even made with their own hands! And if a thing is made by hand, it means that it is safer and more valuable - a person invests his time and love in manufacturing.

Very stylish vase for creative people

Method number 4: Paper vase decor

It will also be original if you glue the jars with paper, both decorative paper and any improvised paper, for example, old notes or sheets from long-forgotten books, will do.

Thin paper is best kept on a jar with homemade glue: brew flour with water. It is completely saturated with glue and envelops the glass. For thicker paper, this method is not suitable - it is best attached to double-sided thin tape.

Master class: Vase with craft paper decor

An unusual vase will harmoniously fit into a rustic interior or country style.

To make this vase, take:

Round glass jar;
Double sided tape;
Kraft paper;
Scissors.

Step 1

Wash the jar thoroughly, remove the label from it. Cover the jar with double sided tape.

We take any jar in the form of a barrel

We paste over the jar with double-sided thin tape

Take kraft paper and cut into narrow strips, which gently, trying not to tear, twist into flagella.

We make stripes 5 cm wide

Rolling paper

Slowly glue in a circle a jar of twisted kraft paper, lightly pressing it against the adhesive tape. The vase is ready - pour water into it and place a flower so that it begins to delight you with its aroma!

Method number 5: Canvas decor

The decor of the vase with a canvas is perfect if your apartment is decorated in the style of Rustic or Provence. Where can I get the canvas? A simple tip: any market or hardware store sells linen bags, their cost is cheap. Cut it into strips and decorate whatever you want.

ATTENTION: The canvas is a very dense material. It is best held by mounting glue for construction in a gun on any basis. When gluing, it is necessary to press it very tightly to the jar!

Method number 6: Lace jar decor

It is very easy to make a vase from a jar by gluing old lace on it. Mounting lace on a jar is best done with silicone glue or a mounting gun. The thinner the lace is, the tighter it will adhere to the glass, so give priority to synthetic lace.

3 ratings, average: 5,00 out of 5)

It has long been used to decorate living rooms, hallways and bedrooms. They easily fit into almost every interior and are a spectacular room decor. A vase can have a strict laconic design or, on the contrary, be decorated with rich stucco and gilding, have different shape and height. On the this moment the assortment of stores presents a huge number of vases from famous decorators and conventional brands, so choosing the right model is not difficult. But if you want something original with an unusual author's decor, then it is better to make a floor vase with your own hands. So you can realize your own ideas and not waste precious time looking for the desired product in stores.

Making a floor vase with your own hands

The basis for crafts can be plastic and glass bottles, newspapers, metal pipes and old unnecessary vases. Here, the method of using thick cardboard will be clearly demonstrated. So, to make a vase, you will need the following tools and materials:

cardboard tube, thick sheets;
a piece of fiberboard;
felt-tip pen or pencil;
scissors and PVA glue;
newspapers;
sandpaper;
putty.

Do-it-yourself floor vase will be carried out in several stages:

Cut the cardboard tube to the required length and glue it to the fiberboard base.
Make blanks. The shape of your future will depend on the shape of the blanks. Please note that the more details there are, the easier it is to work on the product in the future. The optimal number of blanks is 25-30 pieces.
Glue the cut blanks around the perimeter of the pipe. For attachment, you will need a special hot glue gun with silicone rods (“hot glue”).
Using newspapers and PVA glue, glue the resulting base. Leave the product for a few days by the battery so that the glue has time to dry.
Primer. Dilute the putty with PVA glue and coat the product with the resulting mass. Leave the fake for a day so that the papier-mâché has time to grab. When the surface is hard, sand it down with sandpaper. Continue the procedure until the workpiece is smooth and even.
Decor. The most interesting stage of work. Patterns are molded from keraplast, salt dough or plastic and glued onto the surface of the vase with glue. To make small ornaments, you need to use chopped and folded into strings paper napkins. Wet tissue threads can be twisted into petals, spirals and wavy lines. After all the decorative elements have dried, open the surface with PVA glue diluted with water.
Painting. Apply acrylic lacquer to the entire surface of the vase. You can shade some elements with gilding (it can be sprayed from spray cans).

The result is a luxurious floor vase, which will be difficult to distinguish from the purchased one. To make its design even more interesting, you can use craquelure, bitumen or special patterns for decoupage. If you want to get an unusual relief surface, then go over the selected area with glue and fill this place with small cereals (millet, peas), decorative beads or beads.

Please note that you cannot pour liquid into such a vase and store fresh flowers. It is better to use artificial plants or tree branches.

Beautiful do-it-yourself floor vases: manufacturing methods

Do not think that a vase can only be made from thick paper. Here you can use boxes, bottles, newspaper tubes, plastic cans. You can decorate the product with threads, wire, shells and even pistachio shells. Looks very fancy and creative!

How wonderful it is to receive a bouquet of flowers as a gift or just pick them in the field and bring them home to fill the atmosphere with a fabulous aroma! Be that as it may, you will definitely need a vase.

Decorating your home is common to all women. They lovingly equip life, decorating a cozy house with cute trinkets, including various figurines and vases. Of course, it is easier to buy ready-made products, but if you want an exclusive and unusual presentation, read our article. In it we will tell you how to make a vase with your own hands.

How to make a paper vase with your own hands

You can completely make a paper vase at home using papier-mâché or origami techniques. But for this you need to have certain skills, and this is not suitable for everyone. And be sure to keep in mind that only decorative flowers can be placed in a vase made of cardboard or paper, because the product will become unusable from water.

To make a paper vase, you can use any transparent container such as an old can or a used bottle. To give them beautiful view glue the surface corrugated paper of the chosen color or wrap with colored cardboard and decorate with matching ribbons.

DIY paper vase: video

Tip: in order for the paper to adhere well to the glass, use PVA glue diluted with water in a 1: 1 ratio.

How to make a do-it-yourself cardboard vase

For work we stock up:

cardboard;
scissors;
glue;
paperclips;
tape;
coffee beans, nutshells, pistachios (for decoration).

We take any large box, lay it out on the floor or on the table and draw a diagram on it (Fig. 1). Then we cut out the shape and fold the vase out of cardboard, fixing the corners with tape. Carefully glue each fold so that the vase does not fall apart. If necessary, glue the outside of the product with paper, wrapping it inward and fixing it with paper clips.

It's time for decor. Of course, it is difficult to calculate how many decorative elements you will need to decorate a homemade vase, but in the process of work you will figure it out and, if necessary, buy the missing amount of details. So, smear each piece with glue and, starting from the bottom of the vase, begin to glue it carefully. At the same time, try to keep as little empty space as possible between the elements. The result should be a vase, as shown in the picture.

Do not forget to process the upper part of the product in a similar way from the inside. Everything, the vase is ready to decorate your home!

Do-it-yourself cardboard vase: video

To make a vase with your own hands, you will need: 1. Corrugated cardboard; 2. Mass of papier-mâché; 3. Masking tape; 4. Hot glue; 5. Acrylic paints and varnish.

If you have a few hours of free time and a desire to create something beautiful with your own hands, read how to make a simple origami paper vase with your own hands.

In fact, apart from double-sided colored paper and following the instructions exactly, nothing is needed! In addition, origami is a great way to develop fine motor skills, imagination and logic.

A simple paper vase is useful for storing stationery, you can also put a vessel with water and flowers in it.

So, let's get to work. We take a square of colored paper and bend it diagonally, after which we unfold it and do the same with the opposite diagonal (see Figures 1-3). Then it is necessary to fold the sheet in the form of a rhombus and iron the lines with your fingers, along which we will then bend the part (see Fig. 4-6).

Now we bend the left and right corners, turn the part over and repeat the steps with the remaining corners. After that, we unbend the central corner, lowering it to the middle, and bend the left corner. Then you need to turn the workpiece and repeat the manipulations: bend the corners to the center and along the marked lines. The lowest corner is unfolded and unbent: this is necessary for the stability of the vase.

In more detail, the procedure can be considered on the provided step by step diagram with images. Connoisseurs say that it is unlikely that you will be able to make a beautiful vase using origami the first time, because the work is painstaking and requires some skills, so it is better to try on unnecessary pieces of paper.

If desired, the vase is decorated by applying touches of glue to the surface and filling them with colored semolina, sparkles, rhinestones or beads.

In the next assembly of pictures, you can consider how to make a vase from modules - parts from which it is then assembled decorative item. To make the vase bright, use modules of different colors.

This work is considered more complex and requires experience and thoughtfulness: one wrong step and everything will go down the drain.

Vase from origami modules: video

Modules are made of 1/32 rectangles

Video: how to make origami modules 1/32. Master class for beginners.

Now we will tell you how to make such an unusual and stylish vase for storing small items. Please note that the product is not intended for food!

We take a plastic bottle of any color, hold it over the fire to bend it: this must be done while the plastic is hot. After cooling, we take a soldering iron and randomly drill a large number of holes of the same diameter. Everything, our vase is ready!

You can take an ordinary plastic bottle and sew a felt case or an old sweater on it. This decor is great for decorating a country interior.

A plastic bottle or a box of chips can also be transformed beyond recognition by pasting over the surface with stones or shells.

The easiest way to decorate a plastic bottle is to wrap it in printed tissue paper or colored tape, then decorate it with a matching bow.

You can also wrap the bottle with colored threads or rope.

DIY plastic bottle vase: video

Vases made from natural materials

AT modern world there is so little ecological cleanliness that you want to be closer to nature even in urban conditions. Eco-design is very relevant today, so if you choose a vase for giving, feel free to follow our advice.

Pumpkin crafts are a great way to show your imagination and rally your family for a common needlework. To work, you need to stock up sharp knife, spoon and pumpkins of different sizes.

Take a pumpkin and cut off the top from it, and through the hole, clean it from the insides and let it dry. The pulp can not be thrown away, but used to make face masks. Let's start with the manufacture of the simplest options for environmentally friendly vases.

The edges of the vase can be made "lace" by carefully cutting them with a thin knife.

If you are familiar with, use your skills to make a unique pumpkin vase that you can insert burning candles inside!

How to make a vase from maple leaves with your own hands

And kids will surely like such a vase, because it’s fun to make it, and it’s also interesting to use it! Collect a bunch of maple leaves, clean them of dirt and cut off their legs. In the meantime, it is necessary to inflate the balloon and smear it with glue to the middle. We glue the leaves overlapping each other using PVA glue and a brush. Let the product dry. When the leaves dry, pierce the ball and carefully remove it.

Good luck with your creativity!

Reading time ≈ 11 minutes

Making a vase from improvised materials with your own hands is a great way to pass the time with benefit and pleasure. So you can give a second life to unnecessary things, get an original little thing for the house and transform it. Consider a few simple master classes on making vases from cans, glass bottles and vessels, and other containers available on the farm.

Examples of vases with their own hands.

Decor materials

In the following master classes on self-manufacturing vases will use materials that you are likely to find in your home, and only a small part of them may need to be purchased. Of course, we are talking about decorating a finished waterproof vessel, since it will be an impossible task for most to make a vase from scratch on their own.

You may also be interested in:
Many materials can be used to decorate a vase:

textiles of all kinds, textures, colors, including ribbons, yarn, ropes, burlap;
buttons, beads, beads, sequins;
colored (printed) adhesive tape;
enameling, glitter;
coffee beans, cereals, seeds, coarse salt;
natural plant materials: twigs, chestnuts, acorns, leaves;
sea shells, natural stones;
kraft paper, cardboard;
clothespins;
coins.

Materials for needlework.

For fastening, it is best to use a transparent glue, which, when dried, does not give a shade and does not stain the materials. And as a basis, a great variety of containers that do not let water through are suitable:

If you are not going to put fresh cut flowers in water in a vase, then the product can be made of a permeable material (cardboard base, for example, a coil or reel).

Cardboard bobbins.

Vase from a jar and twigs

To create a vase, you will need materials that you can probably find at home:

glass jar with a volume of 0.5, 1 or 1.5 l;
twine or thin rope;
a small piece of burlap;
chopped twigs of small diameter (about 0.5 cm);
glue.

Tip: the glass jar can be replaced with any other cylindrical container.

Step-by-step production of a vase from twigs.

Step by step production:

Cut the collected branches with a hacksaw into segments of the same length. They should be similar to the height of the glass container.
Using twine, fasten the branches at the upper and lower ends, tying the twine into knots. As a result, you should get a kind of canvas of twigs.
A piece of burlap, equal in length to the circumference of the jar, must be wound on the vessel, the upper ends wrapped inside the jar and glued. A neat bottom can be left free.
Next, the canvas of twigs needs to be wrapped around the container and tied into knots.

Alternatively, you can not use burlap, but plant branches on glue directly on the jar. In conclusion, it is desirable to fasten the structure with a rope wrapped around the can in several turns. The product will look as decorative and aesthetically pleasing as in the burlap version.

Ready product.

If you use not thin branches, but thicker segments, the vase will turn out to be more rough, but no less original:

Another version of the product.

When using jute

In this master class, you also need to use a glass jar or bottle. You will also need:

glue;
twine, jute or other beautiful rope, a thick rope will also work.

Twine decor.

Manufacturing step by step:

As a result of the work done, you get such a laconic and spectacular vase with your own hands from improvised means:

Ready product.

With a fairly impressive size of the vessel, the vase can be used as a floor vase.

Painted bottle vase

This master class is also very simple and will take you no more than half an hour. Necessary materials:

a glass bottle for any liquid (mineral water, champagne, dairy products);
universal spray paint of the desired color.

Painted bottles.

Step by step process:

Wash the bottle inside and out, remove all labels and traces of glue.
Put the bottle on a metal or wooden rod, turn it over - this will be a kind of support.
Now the container can be painted. It is advisable to use the paint in a spray can for an even and uniform layer without smears.

To get a geometric or any other pattern, pre-cut strips (other shapes) from adhesive tape and stick on the container before painting.

For a more festive and elegant look, you can use sequins of an adjacent shade. With the help of paints and sparkles, you can create very spectacular ensembles.

Glitter decor.

Sequins can cover not the entire vessel, but only part of it:

Partial decor.

There is another option for coloring the bottle - from the inside. To do this, you can use paint in cans. You will also need a metal baking sheet and a grid. Bottles need to be prepared, then pour a small amount of paint inside and carefully distribute it over all walls, turning the bottle over. To dry, the vessel must be turned upside down and left for a day.

Coloring of bottles inside.

Vase of clothespins and tins

The next vase is suitable for a miniature bouquet delicate flowers. For the manufacture you will need a tin can, a set of clothespins.

Tip: to make the vase neat, it is important to use a small jar, the walls of which can be completely hidden under clothespins.

Clean the jar of dirt, remove the label.
Attach the clothespins tightly to the sides of the jar. For reliability, you can use glue. We recommend purchasing a set of plain wooden clothespins for making a vase - they look as aesthetically pleasing as possible.

Manufacturing process.

The finished vase can be decorated with clippings or stickers. In fact, this is not quite a vase, but rather -. Inside such a stand, you can place a glass cup with a bouquet.

Finished vase.

Vase for artists

You can make the following creative vase in 20 minutes, the main thing is to have all the necessary materials on hand:

any cylindrical container that does not allow water to pass through;
strong glue;
packaging of pencils / felt-tip pens / brushes.

Decor and pencils.

The photo shows that for the manufacture of a vase, the container must be carefully and tightly pasted over with pencils. For a beautiful look, it is advisable to use a pack of new pencils of the same length. The finished product can be tied with a decorative ribbon.

If you use brushes, the vase will look like this:

Tassel decor.

Using fabric

To create the next vase, we will use a simple set of materials and tools:

a glass container (glass is better, as it looks beautifully from under the areas not covered with fabric);
a small piece of fabric (several harmoniously combined colors can be used, plain canvases can be supplemented with printed ones);
glue;
scissors;
for decoration: twine, buttons, beads, ribbons, lace, etc.

Idea: Instead of buying new fabric, it is better to look for unnecessary pieces among your needlework materials, as well as sort out old, not worn items for a long time. Natural materials will look most cute and gentle: linen, cotton, natural lace.

Necessary materials.

Step by step manufacturing process:

The following photo shows another version of this technique:

burlap decor.

knitted texture

For the next super-simple workshop, you will need an unnecessary knitted item or yarn and knitting needles (if you have knitting skills), as well as a vessel. The bottom line is to make a kind of cover for the container. To do this, you can cut off a sleeve from an unnecessary knitted item if it fits the vessel in diameter. One edge must be carefully tucked up and put on the container - voila, the decor is ready! If you know how to knit, then the original cover can be made in the evening. To avoid seams, it is better to knit on four knitting needles.

Knitted cover for a vase.

By the way, according to the same principle, covers are made for stationery stands, candlesticks, cups and thermoses, and even furniture.

Case variations.

Light bulb mini vase

The following incandescent bulb vase is small in size, so it is suitable for placing a small bouquet or a single color. However, if you make an ensemble of several "vases", you get a very effective picture.

Light bulb vase.

For manufacturing, prepare the following materials and tools:

a few burned out or new light bulbs;
twine or thin braid;
pliers;

Step by step production:

Use a sharp knife to pry off the soldered part (insulation).
Next, you need to remove all the “stuffing” from the light bulb: the stem, electrodes, thread. It is important not to damage the base.
Next, you need to wind the twine around the base and make a small loop - our vase cannot stand, so it will have to be hung.

Manufacturing process.

This product is ready! It remains to do the manipulations with the remaining light bulbs, and make a kit.

Ready product.

An ensemble located on a tree of branches will look very original:

Ensemble of vases made of light bulbs.

Ensemble

Such a composition looks very festive, elegant, gentle and at the same time, it will take quite a bit of time to create it. The main thing is to choose containers that are identical in size and design. It is undesirable to fasten them with glue - so, if necessary, you can disassemble the ensemble. A much more practical and elegant option would be a beautiful satin or rep ribbon in several turns, tied into a bow. At bottleneck containers in each it will be possible to insert only one flower.

An ensemble of containers.

Putty decor

In conclusion, we will tell you how to decorate the vessel with putty and paint. If you have some putty left after the repair, this option is just for you!

What you need:

glass vessel of any shape and size;
putty;
acrylic paints and varnish (paints should be in contrasting shades);
floristic mesh;
sponge, fine-grained sandpaper and a small spatula.

Putty decor.

Step by step production:

Video: do-it-yourself putty vase.

For those who want to change the interior of their home, we provide a good opportunity - decorating a vase with your own hands. Every home has dishes, tall glasses, old vases, any suitable containers that you want to update and make more interesting. If iterate various options, then there will certainly be an interesting master class from affordable, inexpensive materials. We have several master classes - the choice is yours!

Today we will create and make vase decor. The new vase will be in nautical style, such original products make the house unique and cozy. Despite the storms and storms outside the windows, your home will always have peace and its own warm atmosphere.

For work you will need:

Any suitable containers (glasses, vases, glass and iron cans, and so on).
Rope or thick string.
Dye for fabric (you can take dyes for Easter eggs or a simple green).
PVA glue.
Scissors.

Let's start decorating with a round vase. To do this, we need ropes of the same length. We draw a glue line in the middle of the container, and glue the ends of the ropes. The ropes should completely cover the vase, leaving no gap. We are waiting for the glue to harden, and we begin to weave a “braid”, as in the photo. We finish weaving and cut off the excess. Glue the ends of the "braid" to the vase. To carefully hide the ends of the "braid", you can glue an additional decor from the rope.

Next, we will decorate the glass cylinder. To do this, glue the ends of the ropes to our vase. They should be longer than the container (then cut off the excess). Pieces of rope along the length just above the vase, and one long rope for decoration. Pass the rope in a checkerboard pattern through 4 ropes. Glue is used at the bottom, in the middle, and at the top. We glue 1 rope on top and bottom.

And the last option is decor with staining. Take a similar container and apply glue to the surface, try to apply more at the top and bottom. We wind the rope on the vase, pulling harder. Next, paint, or a drop of brilliant green, is diluted in a jar of water. First, the coloring liquid should cover our vase by ⅓. We lower the vase into the water and hold it for a short time. You will see for yourself how ⅓ of the vase will be stained. We take it out, wait for the product to dry a little, add water to ⅔. We lower the vase again. The top tone will be lighter. Here it is ready beautiful thing for the interior.

Here are such stylish vases for the interior turned out.

A great idea for decorating glass cups is to make a vintage flower vase out of the glass. Using a thermal gun with silicone glue, we will make a three-dimensional drawing on a vase. The master class is very simple, so you can decorate not only a vase, but also flower pots, bottles, decanters, and so on. And if everything is done in one color, you get a cool ensemble for the interior.

For work you will need:

Glass jar or vase.
Light acrylic paint.
PVA glue.
Glue gun.
Dark (black or gray) acrylic paint.
Sponge or brush.
Napkins or rice paper.
To begin with, we select a vintage stencil.

We transfer the desired pattern onto paper, fix the paper with the pattern inside the glass with adhesive tape. Draw lines on outside glass.

We take a glue gun and fill the entire inner surface of the pattern with glue. Do not be afraid to smear the glue, after drying it is easily removed with a regular knife. Next, take napkins or thin paper and tear into pieces.

Then glue pieces of paper or napkins onto the surface with PVA glue. Use a brush or sponge. After the surface has dried, we cover our product on top with light acrylic paint.

At the end of the master class, for the final decor, we pass with a dry brush over a vase, black or dark acrylic paint. Lacquered on top. The master class on decorating the interior is over.

Making original vases for the interior with your own hands from ordinary simple products is tempting and interesting. The master class is very simple and budget. If you do not have glass containers of this type, you can decorate any jar or bottle in this way. Vases decorated in this way are light and embossed.

For work you will need:

Glass or plastic containers.
Glue gun.
Paint in a can.

Before work, you need to degrease the surface of the vases, we do this with any alcohol-containing liquid. We will glue gun do geometric figures: triangles, squares, lines. They don't have to be the right shape, right? handmade. After the glue dries, we proceed to painting the products with spray paint. If necessary, repeat coloring after drying.

Next, we place round vases on top of long containers. We glue the vases with a glue gun. These vases are perfect for decorating a living room. The combination of vases of different shapes will look very interesting in the interior. The master class is over.

And, finally, the most complex decor, but very interesting - dot painting of vases. We offer a small master class. This is done by contour or acrylic paints. Points are placed using a contour, a toothpick, a needle, a cotton swab. Paints for painting can be bought at art stores or online stores.

This decor is one of the most complex and time-consuming. The most important thing is to try so that the dots do not merge. Very beautiful products are obtained on a black background. That is, a vase or bottle made of dark glass is the best option for work. But then look at what beautiful and unique products are obtained.

How else can you use glass or other containers for decoration? An interesting option: using twigs, pencils, or straws for cocktails. All this can be fastened with glue or double tape.

You can wear vases in leggings or black tights. Decorating is very simple: cut off the lower or middle piece from leggings, it should be longer than the vase. We stretch the lycra on a glass vase, grab the bottom with a needle and thread. The top edge is simply tucked in. You can grab the inside with transparent tape.