Design

In step with the times: innovative floor coverings. New technologies for flooring Pouring a protective layer

Self-leveling floors 3d almost immediately became popular after the appearance on the market, despite the rather high price. This is a universal coating, which is used with the same degree of efficiency on objects with different interior and purpose. All work can be done by hand, but you need to prepare a drawing, strictly follow the manufacturing technology, control the conditions environment.

What is a 3d floor?

The coating of this type consists of several layers: base, pattern / texture, finishing. The compositions for this task tend to harden quite quickly, so the option of making a 3D floor with your own hands is difficult to implement, but still possible. The drawing can be sketched directly on the rough coating, but in living conditions it is preferable to use a material with a fixed pattern. This is a less time-consuming process, and besides, it will also be cheaper.

Multicomponent compositions (polymer, mineral) are used as the basis of the coating. The 3D effect is provided by the top layer. To obtain a more pronounced volume of the image, you need to increase the thickness of the finish. But in this case, it will be necessary to use materials with a different ratio of components so that changing the parameters of the coating does not affect its strength.

Phased work

The technology of pouring a self-leveling floor includes three main stages: preparation of the base (rough screed); transferring a pattern or pattern / creating a textured surface (pebbles, sand, shells, etc.); finishing. But before starting the work with your own hands, it is recommended to pay special attention to the stage of choosing an image, as well as its preparation.

What to consider when choosing a picture

The first step is to determine your own preferences. It can be a drawing transferred to the screed, photo printing, abstraction and other creations. Important nuance- the image must be of high quality (at least 1440 dpi). 3D floors on the marine theme, photos of the abyss, descent will look spectacular. For all other cases, it is recommended to equip a thicker finish layer to enhance the perception of volume.

Popular 3D drawings with depth effect: these are water, abyss, descent. Especially the marine theme, where, thanks to a special airbrushing technique, a truly impressive realism is achieved.

In order not to injure the psyche, it is better to avoid using photographs depicting danger (monsters, predators, creepy motifs). Another direction that should not be used is falling or moving objects (for example, a large wave), since dynamism in the image when arranging a 3D bulk coating is not the best option.

The most common mistakes in arranging 3D floors, selecting a pattern

Flashy photos with a lot of bright elements are also not suitable. All these images will constantly affect the subconscious in a negative way.

How to change perspective

If you plan to do all the work yourself, you need to understand a graphics program with sufficient functionality to fully change the characteristics of the image. The most popular option is Photoshop.

Detailed instructions for further actions:

The room where the 3D floor will be poured with your own hands must be photographed, and this should be done from the right angle, for example, standing at the entrance;
The graphic editor allows you to superimpose a pre-selected picture on the image of the room;
The photo is cleaned up: nothing superfluous should remain on it, except for the floor with the picture fixed on it;
Having received the outlines of the flooring in perspective (it resembles a trapezoid in shape), you need to correct the borders of the image with your own hands until you get a rectangle (tools in the Vanishing Point graphics editor, Create plane tool);
It remains only to save the file (extension.png).

The quality of the image directly depends on how carefully the floor was cut in the photo.

printout

A common option for transferring photos is through banner fabric. The popularity of this material is due to its resistance to moisture, sometimes even with aggressive components (rain, snow). Considering the high quality of the future coverage, the cost of banner fabric is quite acceptable - about 20 USD/sq. m. You can contact any organization that offers outdoor printing services to print the file.

It is recommended that you print a test print on a small paper size. This will allow you to evaluate the quality of the image and the product as a whole. It is also quite possible to order a full-size black and white print on paper, then it will be possible to evaluate the drawing on the floor of the room.

Foundation preparation

The concrete surface is cleaned. Moreover, you need to remove with your own hands not only dust, but also greasy spots(oil, fat, etc.). The surface is covered with a primer mixture; without this, the technology of laying materials will be disrupted due to low adhesion. An intermediate layer is formed (rough screed based on mineral or polymer compositions). Next, a decorative design is applied / attached.

How a photo is pasted and transferred

The canvas is spread over the surface with your own hands. Mounting method - adhesive composition. In this case, it is necessary to control that air bubbles do not appear between the canvas and the base. Careful smoothing of the material will avoid such shortcomings. In the case when a 3D drawing is transferred with your own hands directly to the base, the production of the floor will include one more step - applying a primer on top of the picture after the acrylic paint has completely dried.

The nuances of the filling process

The volume of the image is given by a sufficient thickness of the transparent layer of the polymer material. It is also necessary to apply a protective coating on top, which will provide long-term operation floors without the risk of surface abrasion.

Filling with polymer composition

Material consumption depends on the layer thickness. For example, the production of a 3 mm coating requires material preparation at the rate of 4-4.5 kg/sq. m. You need to work as productively as possible, but at the same time with high quality, since the composition for laying the topcoat quickly sets.

Filling the protective layer

Coating thickness - 0.5 mm. Working hours from ready mix- no more than an hour (again, you should focus on a period of 40 minutes). For laying with your own hands, you need to prepare a spatula and a roller with a needle-like surface. A small amount of material is applied with a spatula and spread by means of a roller until the coating begins to slightly stick. The term of complete drying of the finishing layer is up to 7 days.

Pour the mixture onto the surface. The base is leveled by means of a rule and a spiked roller, the main purpose of which is to remove air bubbles from the thickness of the base.

Difficulties at different stages of work

The main enemies of a high-quality coating are unsuitable environmental conditions and an erroneous dosage of the mixture components. In the first case leading role humidity plays. With an increase in this indicator, bubbles appear on the surface of the floor.

You can check whether the working conditions are suitable using a piece of plastic film. It is straightened on the floor, gluing around the perimeter with adhesive tape. After waiting 3 days, you can remove this design.

If the color of the surface under the film changes and in case of condensation on its surface, do not start work until the air parameters are normalized.

Incorrect dosage of the components of the mixture will lead to a decrease in the quality of the floor. The production of a coating includes the step of determining sufficient thickness of the finish layer to provide the required level of surface reliability. The ratio of the number of components in this case may vary.

What kind of curiosity this is, self-leveling 3D floors, for many remained a mystery until quite recently. It was possible to see this miracle only in expensive restaurants and some nightclubs. But today, Elakor-ED (Russia), which relatively recently appeared on the market, have become available to the general public, and everyone can use this amazing novelty to decorate the interior of their home.

In the manufacture of new self-leveling 3D floors, a surprisingly simple technology is used. The base of the surface is preliminarily prepared, then a two-dimensional graphic image is pasted on it, and the final step is the application of a special polyurethane composition. Installation of a warm self-leveling 3D floor "Elakor-ED" at the request of the customer will also not be difficult.

Thanks to the latest technologies that were used in the development of all components of the Elakor-ED floor, the quality of the product is not inferior the best brands foreign manufacturers. The advantages of 3D floors are as follows:
High wear resistance
Abrasive wear resistance
Excellent resistance to UV and visible light
Up to 2 mm depth of optical transparency of the floor layer
Ease of operation and maintenance

If we talk about the aesthetic appeal of the new 3D floors by Elakor-ED, no one will doubt this side of the issue. Suggested Options original design novelties create a stunning effect. How do you like the idea of seeing a piece instead of the usual floor sea beach with a wave crashing on the shore? Or a warm floor with a picture of a flowering meadow, the globe or fluffy clouds with the effect of full presence? With the help of self-leveling 3D floors "Elakor-ED" you can realize any, the most and create a unique, original, amazing interior in the room. Just do not forget that all the beauty of the “picture” opens only in the space that is as free from furniture as possible.

Even today, new 3D self-leveling floors "Elakor-ED" can be purchased on the Russian market at quite affordable prices.

Related materials

At the mention of the phrase "concrete floor" something dull, gray and cold appears under your feet. It turns out that this is not the case at all...

You can talk about the importance of floor screed for a very long time. Not without reason, many articles are devoted to this topic on our blogs. How...

Since July 2017, the high-strength self-leveling floor WEBER.VETONIT 4100 has been produced in a new 20 kg package. The company "Saint-Gobain" managed to improve the process ...

The floor is an integral element of any room, which, apart from specifications has aesthetic value. New flooring technologies include a host of new materials and laying techniques. Modern flooring has changed significantly, acquired the new kind and a new level of quality. Ceramic tiles were supplemented with porcelain stoneware, appeared engineering parquet and laminate, heat-resistant linoleum, but these materials have already become common for the consumer and are not surprising.

A number of technical and sanitary requirements are imposed on new floor coverings:

wear resistance and durability;
resistance to temperature difference;
moisture resistance;
ease of installation;
environmental friendliness;
high aesthetic values.

New technologies in laying the floor can be divided into sectional and self-leveling.

New sectional floors

Sectional floor materials are square or rectangular panels with grooves on the ends (locks) for interconnection. Materials may emit natural wood, stone or differ creative design. Such materials include wooden and engineered parquet, laminate, etc. Recently, new material, the scope of which goes beyond internal device floors.

Wood-polymer composite (WPC)

The floor material is made from wood flour based on a binder polymer - polypropylene. The format of the floor sections is usually in the form of panels or boards. I call the last deck board. The material is distinguished by its special moisture resistance and respectable appearance. Due to which it gained wide popularity. It is especially convenient to use it in extreme conditions, that is, where a natural board will not last long: in a country summer house, in the gazebo, on the terrace, around the pool.

Rectangular panels are more often used in modular structures - block containers, wagon-houses, play and utility blocks. The material itself is versatile. Wall and roof panels are also made from it.

Wood-cement boards (ICP)

As a rule, these panels are used for the construction of a rough foundation in the construction of a private house. These are completely new technologies in flooring, which allow significant savings. Cerebral palsy is an excellent alternative to a board that fits directly on the logs. On top of the plates, you can lay any front cover. Wood-cement boards are made from carpentry waste (as aggregate) and cement (as binder). The composition also includes lime, which serves as an antiseptic and makes the material durable.

By definition, this is nothing new, since the filling method of the device is a simple pouring of the screed. Cement floors are used in public and industrial buildings, and in residential premises they are used as a screed.

Not so long ago, a self-levelling screed was used to achieve perfect horizontality, but the use of polymerizing resins for pouring floors has become an innovation.

Imagine the floor with a three-dimensional image. The installation method of such a floor consists in pouring a rough primed base epoxy resin. To get a spatial pattern, the fill is done in layers with separate images on each layer. Often decorative elements are poured into the resin layer - shells, sea stones or just shiny chips. The final layer is made with a transparent wear-resistant varnish.

The advantage of a 3D floor lies in its exclusivity, because each image is original in its own way. In addition, the polymer used has excellent thermal insulation and shockproof qualities. Its durability is practically unlimited and the floor will last no less than the sand-cement base itself. The only drawback is the impossibility of dismantling it due to its colossal strength, so if the drawing is tired, then a new one will have to be poured in the old way.

Self-leveling 3D floors are not cheap, so they have not become widespread.

Floors of the future - fiction or reality?

For its 100th anniversary, one of the most advanced flooring manufacturers, Uzin Utz AG, has announced a competition called "Floors of the Future", in which the best engineers and designers from all over the world took part. Among the presented projects, some simply amazed the imagination with their boundless imagination and technical capabilities.

At first glance, there is nothing special, just a dark glossy surface, but as soon as you step on it naked, the pictures begin to come to life at the point of contact. The entire surface in this case is a giant touchscreen protected by a durable transparent material, and flooring overall like a big tablet computer.

The idea is certainly interesting, but today it is unpromising because of the colossal cost.

Cable-stayed floor

The technology consists in special fasteners without the use of glue or any binders. The advantages are speed and ease of installation, the ability to move to a new location, and, most importantly, the coating has a sound-absorbing effect.

Stretch floors were first introduced in 2012 and noted as the most promising project. The only downside was the cost. But today, thanks to subsequent improvements, the technology began to be realized and gain popularity.

Electromagnetic floors

This type of base is designed for industrial facilities and can be used in connection with the need to move heavy objects. The floor creates a magnetic cushion, so you can move objects without touching the floor. ABOUT practical application electromagnetic floors are not yet known, but in the future this method may become part of many technological processes.

dynamically active floors

The essence of the idea is the possibility of changing the texture of its surface. Depending on the program, it will be possible to choose not only static forms - pebbles, wood, but also, for example, grass. It is possible that the project will be of interest to the entertainment and gaming industry, but such coatings will not be expected in an apartment in the near future.

It should be noted that 3D floors were also presented at the "Floors of the Future" competition as a project, but today they are already a reality.

In addition to the flooring itself, the modern building industry offers a wealth of insulation materials, design innovations, economical and effective systems floor heating. Regardless of the type of premises and its purpose, you can always find optimal solution and arrange your home to suit every taste.

Today, a bright and voluminous drawing can be created not only on the walls of the apartment, but even on the floor. Probably, most of the readers of the site have already visited the exhibitions of 3D paintings that are popular today and even came to the galleries of 3D drawings, where you can make unique and interesting photos. And such works of art can be created even in your apartment. Modern building technologies allow you to create 3D floors with your own hands, step-by-step instruction on the arrangement of which is given below.

DIY 3D floors - step by step instructions

3D paintings on the floor in the apartment are created on the basis of self-leveling floor technology. And before you have the opportunity to study the instructions for creating a unique pattern on the floor, you should get acquainted directly with this type of finish and find out its advantages / disadvantages.

So, the self-leveling floor in construction is a special type of screed, for the creation of which special self-leveling building mixtures are used. They are quite fluid, and therefore, in the process of pouring and drying, they manage to be evenly distributed over the surface of the subfloor-base and make the final surface almost perfectly even.

On a note! The minimum thickness of the pouring layer is 3.5 mm.

Self-leveling floors can be divided into two types:

with top coat, which becomes after drying directly the final floor covering;
fast drying concrete screed which allows you to prepare the subfloor for laying various kinds floor covering.

The article will focus on the first type of floor finish, in which case the finishing layer will be applied. And a full-fledged 3D floor can be called when a pattern is applied to it in a special way, from the outside it seems voluminous. To create such a floor is a special chic and an opportunity to give the premises uniqueness and originality, because on the surface of the floors you can reproduce any drawings, even those created by yourself.

Self-leveling floors can be used not only in residential premises - they can also be created in warehouses, in sports halls, on the territory shopping centers etc.

3d self-leveling floors

Self-leveling floors

Any self-leveling floor consists of several layers - there can be 3 or 4 of them. As a rule, this is a rough floor, a primer layer, a leveling layer, a finishing layer. In this case, a building mixture is used as a leveling layer, and a special polymer mixture (two-component) is used to create a finishing layer.

The desired pattern is created, by the way, not on the surface of the finished floor - the image is placed between the leveling and finishing layers.

On a note! The thicker the finish layer, the more pronounced the 3D effect will be. This part is in the structure of self-leveling floors and is responsible for the depth / volume of the picture.

By itself, the self-leveling floor, sometimes called "liquid linoleum", has no gaps and crevices. Coating thickness - up to 7 mm. To the touch, this finish may resemble tiles.

Pros and cons of self-leveling floors

One of the main advantages of self-leveling floors is the ability to make the flooring original and unique. , patterns on linoleum, pvc tiles and other options for materials for decorating floors have already become boring to many, and the self-leveling floor allows you to change the room beyond recognition.

Other advantages of self-leveling floors:

during pouring between the rooms there will be no gaps and cracks;
high strength characteristics;
ease of care - the surface is easy to clean;
attractiveness and uniqueness appearance- self-leveling floors will give the room a uniqueness;
high resistance to various chemical substances;
the opportunity to realize the most daring fantasies;
compatibility with any style of interior;
high rates of moisture resistance;
excellent temperature resistance - compatible with various systems floor heating.

Also, self-leveling 3D floors have disadvantages - yes, this is far from an ideal coating. The disadvantages of this type of finish are as follows:

the complexity of both installation and dismantling - in both cases, large labor costs will be required;
The glossy floor is quickly covered with scratches. Based on this, there is another drawback of the self-leveling coating - the need for protective measures in order to keep the surface in good condition for the longest possible time;
creating a self-leveling floor is not a cheap pleasure, as it will take quite a lot of materials, tools and fixtures.

Attention! When creating a self-leveling 3D floor, it is important to strictly follow the entire technology. Otherwise, there is a risk that the floor will quickly become unusable.

Types of self-leveling floors

There are 4 main types of self-leveling floors - they differ depending on the components that are part of the mixtures used to create them. In general, the technology of their application is similar.

Table. Types of self-leveling floors.

View	Characteristic
	This type of self-leveling floor is based on methyl methacrylic resin. The coating performs well indoors and outdoors. It is often used in various objects of various industries. Resistant to high and low temperatures, not afraid of ultraviolet radiation, depending on certain additives, it can somewhat change its properties. Differs in resistance to influence of hostile environment. It polymerizes quickly, and pouring work can be done even at sub-zero temperatures. Disadvantages - the need to work very quickly, as the coating dries quickly. Requires the help of professionals. It has an unpleasant pungent odor.
	The most commonly used type of coating, characterized by durability, lightness, strength. The coating is not afraid of exposure to water and temperature fluctuations, resistant to shock loads and abrasion. Differs in high rates of hygiene therefore it is recommended for use in medical institutions and food premises. The main drawback is the importance of careful preparatory work(preparation of the base), while the installation should be carried out at low humidity. Another disadvantage is the significant cost of building materials.
	The base is epoxy resin. Such floors can be equipped on wooden, concrete, metal bases. Resistant to abrasive substances, not afraid of chemicals. Often settled in the premises of pharmaceutical and food industries, laboratories. Advantages - ease of maintenance, high resistance to chemical and mechanical stress, environmental friendliness. Disadvantages - inelastic, and therefore easily damaged in the event of strong impacts.
	The basis of such a floor is cement, a polyacrylate copolymer, a special filler. Previously, such floors were created only in the territory of food production, where they often move various cargoes and floors are heavily stressed, constantly disinfected, quickly soiled and subjected to constant cleaning. Self-leveling cement-acrylic floors are not afraid of water, chemicals, mechanical influences. They do not slip (matte), do not peel off, they cope well with temperature fluctuations. The main disadvantage is that it is difficult to install.

If we compare all the above types of floors, we can conclude that polyurethane, epoxy floors can be done independently. As for methyl methacrylate, they are not recommended for use on their own. construction works. The most elastic are polyurethane floors, but epoxy ones are not afraid of chemicals. To level the rough coating, cement-acrylic mixtures can be used.

On a note! In addition to the main four types of self-leveling floors, there is also a mass of combined coatings.

DIY 3D floor

Creating a 3D floor in your house yourself is quite difficult, but possible. The process takes place in several stages: making calculations and preparing the base, creating a leveling layer, drawing a picture and then - the finishing layer. It is the latter that will provide the very 3D effect that people like so much.

Attention! To achieve the desired effect, transparent materials are used as a topcoat.

Materials and tools

In order to create a 3D floor, you need certain materials and tools:

primer required for processing the subfloor;
polymer mixture, due to which a leveling layer will be formed;
directly the drawing itself, which is usually made on banner fabric;
transparent two-component polymer, which will act as a top coat;
adhesive composition, thanks to which the pattern will be fixed on the leveling layer;
protective varnish, which covers the finish coating;
masking tape;
polyethylene film;
spatulas;
rule;
brushes;
special shoes.

masking tape

If the drawing is created manually, then you will need acrylic paints and brushes. A protective composition will also come in handy, which will ensure the safety of the drawing.

Preparation and calculation

So one of initial stages is the product of calculating the number of required Supplies. In many ways, the consumption will depend on the condition of the subfloor (base), the thickness of the layer, as well as the material used (information on consumption can be found on the packaging).

To create a self-leveling floor with a thickness of 3 mm, it is necessary to spend about 4 kg of building mixture per 1 m 2. Based on this, it is possible to necessary calculations. The average cost of 1 m 2 of self-leveling floor with a 3D pattern will be about 6000 rubles. Costs can be slightly reduced if all the work is done independently. By the way, the most expensive part of the entire self-leveling floor is the picture printed on the banner.

Attention! Self-leveling floors with a 3D pattern will look good only on areas larger than 10 m2. It is not worth creating them in small rooms - the whole drawing will simply be lost and invisible.

How to prepare a drawing

To begin with, you should choose the picture that you would like to see daily. The choice of illustration should be approached very responsibly, since it will take a long time to coexist with it. It is necessary that it also fits the interior - you should not draw dolphins in the hall, unless, of course, the design of the main room is made in a marine style.

On a note! If you want to create a drawing yourself, then you should not choose a complex image if there are no artist skills. Let the picture be simple, but memorable and pleasant.

The selected image should be printed on banner fabric. This can be done at any agency that deals with outdoor advertising. By the way, they can also help with the choice of pattern. It is very important to clarify the technical parameters of the final work with the company - the illustration must be printed with a resolution of at least 1440 pixels on matte satin.

Step by step work

After the design was selected and printed, all necessary tools and materials, you can proceed to the work itself.

Step 1. The first stage is the preparation of the foundation. The rough floor is thoroughly cleaned of debris and dust. The surface is degreased if there are stains of oil or paint on it. All cracks, chips are sealed with sealant, irregularities are polished. The surface is thoroughly dried (permissible indicators of base humidity - no more than 4%, air - no more than 50%).

On a note! If the draft floor was poured over a new one, then at least 30 days must pass before the installation of the bulk floor.

Step 2 The surface is primed with a special primer mixture for bulk flooring. The application of the mixture can be done with a roller or spatula. This is necessary so that the base with the leveling layer is very firmly connected.

Step 3 After the primer has dried (about 4 hours), a white epoxy material is poured onto the surface to level the base. Leveling the layer is done with a wide spatula. It is necessary to wear special studded shoes (paint shoes) on your feet, which will allow you to walk on a damp surface.

Step 4 The surface is treated with a special spiked roller. This will remove excess air from the thickness of the material. The surface is dried for at least 24 hours, after which the evenness of the layer is checked.

Step 5 A drawing is being applied (paints, banner fixing, etc.). The base layer is primed, a transparent polymer solution and a solvent mixed in a ratio of 2:1 are applied to it - an adhesive solution for a banner. Also, the adhesive composition can serve as a finishing material. It is applied to the draft surface, and a banner is glued on top. It is very important to expel all the air from under the banner fabric. Work can be done with a clean roller.

On a note! It is very convenient to use a self-adhesive banner for drawing a picture, which works on the principle of translation. A protective film is removed from one of its sides, the pattern is glued to the surface and rolled with a roller.

Step 6 The amount of the polymer mixture of the finishing layer is calculated - it will depend on the required thickness and floor area. On average, the consumption is 4-4.5 kg / m 2. Further, the material is poured onto the surface of the banner, carefully leveled with a rule. Air is expelled by a spiked roller. Next, the floor is covered with plastic wrap until completely dry, and then varnish is applied to the surface, which will protect the surface from mechanical damage.

Video - How 3D floors are made

A few tips will help you create 3D floors as quickly and efficiently as possible:

during the installation of self-leveling floors, in order to protect them from cracks, it is recommended to lay a damper tape along the walls;
in the room where work is carried out, there must be good ventilation;
during work, it is important to use a respirator;
it is desirable to produce a floor bay at an air temperature of at least +10 degrees;
it is necessary to level the finishing layer within 30 minutes, as it dries quickly.

Proper surface care

Care self-leveling floors simple, but still it must be regular to keep the beauty of the coating on long years. For example, every 6 months a special mastic should be applied to the surface, and when repair work the floor should be covered with covering material. Also, special protective caps are put on the legs of the furniture or linings are used.

Floors should be washed with water detergent and then wipe with a clean cloth.

Attention! Do not use substances containing chlorine or acids to clean self-leveling floors.

With some effort and spending a lot of money, you want to immediately get the perfect job. However, creating a self-leveling 3D floor is not an easy task, so you should be prepared for the fact that a beautiful coating will not work the first time. However, over time, you will be able to train, and the drawings on the floors will get better and better.

Time passes, everything around changes. Including Decoration Materials. There are new, more perfect, convenient, affordable. We will not lag behind, we will learn everything about modern flooring.

Of course, no one forbids laying well-known proven options on the floor. Wood, ceramic tile, linoleum, laminate, carpet - each of them has its pros and cons, scope, fans and opponents. And what about the new ones?

TOP 9 innovative flooring

Warm tiles

The Japanese introduced an interesting development to the world - warm ceramics (foam ceramics).

This coating eliminates the main drawback of any ceramic floor - it does not feel cold to the touch.

And all due to the fact that the tile contains air bubbles that serve as thermal insulation. Everything ingenious is simple!

Marmoleum (natural linoleum)

Yes, linoleum can be natural. In fact, that's exactly what he thought.

It contains wood flour, jute, linseed oil and other components.

Take a closer look at it, a very, very worthy option.

carpet tiles

This is an evolved carpet. Now it is cut into perfectly even squares or rectangles, reinforced with reinforcement and a solid non-slip base. The material is convenient in transportation, installation, operation. In case of damage to a single module, it is no longer necessary to replace the entire coating. The possibilities for design are also increasing.

Tile LVT

If many have already met with vinyl and quartz vinyl tiles and have managed to appreciate their excellent performance, then LVT tiles (luxure vinyl tiles) are not known to everyone. This material is incredibly durable and resistant to any factors and damage. The manufacturer claims that even with the most severe use, LVT tiles do not lose their excellent appearance for decades.

Self-leveling floors

Many people like seamless polymer coatings, especially those with an illusory 3D effect.

Their popularity is growing, as is the scope.

Today, the head floor can be found both in home interior, and in commercial space, both in production and in medical institutions.

glass floors

In some houses with an unusual design, hotels, clubs, museums and other places, you can find such coatings.

Most often, this is not a solid glass floor, but decorative inserts. The easiest way to install such a coating is with a raised floor system.

It looks very impressive and unusual, do you agree?

Live tile

The so-called living tile is a modular polymer coating filled with gel.

When in contact with the floor, the drawing seems to come to life and change, striking the person walking on it.

For this property, the tile was called the interactive floor.

cork floor

Resilient, warm, quiet and natural floor.

It can be rolled or in the form of boards.

Easy to install, looks good, even though the range of colors is small.

leather floor

Do you love leather goods? Shoes, handbags, furniture… Would you like to have a leather floor at home?

Unusual coating, which is high-density HDF boards covered with calfskin.

The option, of course, is not for everyone, but the coating looks quite original.

Here is a small selection of modern floor coverings. Can you expand the list? Do it in the comments, we'll be waiting!