Ideas for flower pots from plastic bottles. Master class "Flower pot from plastic containers Flower pots from plastic bottles

Flower pots are a favorite subject of needlework. At the same time, improvised raw materials are often used. Take at least a plastic bottle: it can become the basis of the most unexpected creative ideas. Let's look at the method of turning a flower pot from plastic bottle and note the main features of such products.

Features of homemade models

Pots made from plastic bottles have many advantages. They do not need to be bought, spending large sums family budget. These products are lightweight, they are not afraid of temperature changes and can serve the grown plants for a long time. Given that they do not crack and are not afraid of mechanical damage, such pots can be placed on the floor, where the risk of accidental grazing is likely.

It is worth noting the nuance that pots made of plastic bottles can be very diverse. Choosing for their manufacture various materials and decor, you can make them for a different style of interior or even a landscape. Plastic bottles can be painted, they are not problematic in working with glue, they allow the decoupage technique and cutting of the working surface in any place.

In addition, drainage holes can be made in them, through which excess water will drain.

The resistance of plastic to water is amazing: it takes more than 100-200 years to decompose. You can not be afraid that such pots will collapse under the influence of moisture and constant dampness. If the craftsman has the skills to melt plastic, he will be able to decorate pots with melted material, giving it the shape of, for example, a multi-layered flower. Using colored bottles, beads and wire for this, you can get a product with the illusion of airiness, not inferior in filigree work to analogues from the finest textiles.

For such pots, you can create similar plastic pallets. Also pots from plastic bottles can be used with regular pallets. From this raw material, group pot compositions can also be made to decorate the landscape or small home greenhouses. Such pots can be used as independent elements of the interior or internal containers, decorating the top with pots of various materials.

materials

In addition to the plastic bottles themselves, various raw materials may be needed to work. These can be acrylic paints and clear acrylic varnish, permanent markers, twine, satin ribbons, buttons, beads, seeds. In addition, textile flaps and knitted fabric can be used in the work. The type of material that will be given preference will depend on the characteristics of the style, to emphasize which it is planned to make a flower pot.

In addition to decorative elements, you will have to use a knife or scissors in the work. The decoupage technique requires special three-layer decoupage napkins with a beautiful pattern. In addition, here you will need a brush to level the napkin layer and remove air bubbles. If the technology requires it, they use a soldering iron and a glue gun when working.

Making holes

Holes for water drainage can be made different ways, which depends on the type of plastic in the bottle itself. If the thickness is large, you can drill holes with a screwdriver or drill. When it is thin, it is enough to heat up a screwdriver or a thick awl and, until the tool has cooled down, pierce the bottom of the future pot with it. It is difficult to make holes with a soldering iron, as they will turn out to be large, however, some craftsmen have found an alternative to it in the form of dowels.

Other craftswomen use old knitting needles, glowing them and piercing thin plastic.

How to do?

The options for making a flower pot from a plastic bottle are varied. For example, having artistic skills, you can paint a cropped blank to look like a bee or a cockchafer. Such a product can become a decoration for a summer cottage or a veranda. If you need something quite simple, you can put wicker or knitted covers on cut bottles and draw funny faces on them.

If you want something more sophisticated, you can do the following. Take a transparent bottle, cut it into 3 parts, removing the one in the middle. The lower part will become the base and at the same time the pallet, the upper one will serve as the main container with soil. The edges of the upper part are cut with scallops, after which they are melted with a soldering iron. A soldering iron ennobles the sharp edge of the lower part.

Next, they take blue paint and paint the upper part with it, leaving the neck transparent. The edges are bent, forming a kind of flower. The lower part is decorated with special markers or acrylic paints and a brush.

In the second case, dyes are used on water based, which, after drying, become resistant to moisture.

You can draw anything on the bottom part, from flowers to monograms and lace. After the paints have dried, you can pour earth into the working container and plant a plant. So that the earth does not spill out, on initial stage manufacturing, you can clog the bottom and make holes in it for drainage. You can use a hot awl or a knitting needle for this.

According to an approximate scheme, you can make such a funny pot with your own hands. Take a small plastic bottle, cut it in half with scissors. The upper part is decorated with a funny face using improvised decorative elements (you can buy eyes for soft toys, draw a mouth on paper and stick it on top with tape).

A drainage hole must be made in the cork, into which it is then necessary to insert a fabric flap rolled up with a roll. The flap is fixed with glue, and then cut from below, making a kind of wick through which water can flow down or, conversely, rise to the roots of the planted plant. After that, the lid is closed, soil is poured into the upper container and a flower is planted. The top container is then inserted into the bottom one.

By this principle, you can make a flower pot for flowers from a five-liter bottle. If you want something else, you can resort to using cement mortar and old towels. In this case, pallets should be made from the same material so that the finished product looks holistic and organic. To create a unique shape, you need to soak old towels with a cement mass, then turn the bottle with the neck cut off and put these towels on it, forming folds and draperies.

After drying, the product must be turned over and painted with gold or bronze paint. Holes in this case must be drilled very carefully. You can simply wrap a bottle with a cut-off neck and drilled holes with textiles, tying beautiful ribbon. Then you can fix the fabric by spraying a clear varnish.

Lyubov Baklanova

The Master Class designed for teachers, school-age children, parents and all those who like to create unique crafts with their own hands.

Purpose: can be used to decorate the interior or as a gift.

Target: make a flower pot from a plastic container.

Tasks:

Educational - to teach the technique of making a flower pot from plastic containers, the ability to cut and process parts, to consolidate knowledge on decoupage of a product.

Developing: to develop artistic taste, interest in creative needlework, to instill the ability to usefully spend free time.

Educational: to form industriousness, accuracy, mutual assistance, to cultivate a careful attitude towards the planet and its resources.

Since ancient times, things that were created by hand have been valued all over the world. It is in such products that love, soul, diligence, a wish of joy and good are laid! Handwork highly valued because it is inimitable!

Recently, one of the most popular items for creating all kinds of crafts are ordinary plastic bottles or plastic containers, which have already become quite firmly established in everyday life as convenient packaging for various liquids. Used such bottles and containers, as unnecessary, we throw them away, and so that they do not clog environment you can give them a second life. Crafts from plastic containers are striking in their diversity. They are original, light and modern. There is no limit to imagination and creativity.

Plastic packaging is a second life, which will be much brighter, more diverse than the previous one, and will be the main material for interior decoration. DIY crafts made from plastic containers will decorate your home and will delight your eyes and give you a good mood.

Plastic packaging is a wonderful material:

Cheap and available: you can get it at any time;

You can give any color scheme processing with lace (guipure) fabric;

Can be dyed;

Products can be decorated with various beads, beads, sequins;

Decoupage.

Necessary materials: plastic containers, stationery knife, glue, decoupage napkins, scissors, brush.

1. We take a container and draw lines with a felt-tip pen where we will cut through the container.

2. Cut off the excess along the marked lines.

3. Cut the handle at the top into strips.

4. We decorate the chamomile petals.

5. We select beautiful napkins for decoupage and cut out the motifs you like.

6. Let's start decoupage.

7. Here is the finished flower pot.

8. Simply delight and cheer up. Here are some flower pots we made for our class.

I will be glad if it is useful to someone.

Thank you all for your attention!

Related publications:

Autumn has come, the rains have begun, and we all do not want to say goodbye to summer. And so that we always have a joyful mood, I suggest.

Objectives: to consolidate children's knowledge and skills in working with paper, children's knowledge of flowers, the profession of a seller, develop imagination. Bring up.

The plate can become an interior decoration, a gift for mom, grandmother on March 8. Such gifts can be prepared with children.

Master class for parents on non-traditional drawing with a plastic fork "Cheerful hedgehog" Purpose: to increase the motivation of parents of preschoolers to use non-traditional drawing techniques in development creativity children,.

Master class for educators of the Dymkovo young lady from a plastic bottle Educational field: artistic and aesthetic development.

Relevance of the topic. 41 years ago mankind invented the plastic bottle. The first samples weighed 135 g (96% more than now). Now.

Dear colleagues! I bring to your attention a master class on making a New Year's gnome. This is a toy for a street tree, therefore.

If life is unthinkable without indoor flowers, but the size of the home does not allow them to be placed in large numbers, you can resort to help hanging planters. The advantage is that they can be quickly made with your own hands from easily accessible and, one might say, free material that is in every home. We are talking about ordinary plastic bottles, which are usually thrown into the trash can, but with a little imagination and diligence, they can be given a second life by turning them into original “cup holders” for flower pots.

Suspended

For products you will need materials:

• plastic bottles;
• stationery knife;
• hole puncher;
• acrylic or aerosol paints;
• brush for painting;
• glue gun or superglue;
• strong cord.

Products are made in several stages.

1. Cut off lower part bottles right size with a utility knife. If not, you can use sharp scissors. In order for the muzzle of any animal to flaunt on the cache-pot, you need to cut the blank immediately with the contours of the ears. In addition, cut or punch holes for threading the cord.
2. Paint the craft on the outside in the desired color with a brush or cover with an aerosol from a can, let dry. Drying time depends on the brand of paint used. Paint on a muzzle, for example, a cat or a hare, to the pre-cut ears. Dry again, then thread the cord through the pre-prepared holes.
3. It is difficult to cut off part of the bottle so that the edge is perfectly even. A beautiful braid will help to hide this flaw. Apply glue around the edge of the craft along the width of the braid and carefully fasten, leave to dry.
4. Place a flower pot inside and hang it in any place you like.

Flower pots will wonderfully enliven and decorate any room.

Swan

In the courtyards of houses and on summer cottages you can see an amazingly beautiful sight: crafts in the form of swans. At first it is difficult to guess what they are made of. In fact, the basis for crafts is an ordinary large plastic bottle with a volume of 5 liters. For work, you need to prepare materials:

• plastic bottle of 5 liters;
• iron bar 0.6 mm thick;
• a container for preparing a solution;
• 2 pieces of large mesh for the wings and 1 small one for the tail;
• bandage;
• brush;
• putty knife;
• sand or stones for filler.

Actions are performed step by step.

• Bend an iron rod in the shape of a swan's neck.
• In a large square-shaped plastic bottle, cut the top without affecting the neck.
• Thread the rod through a small hole in the cork, secure with glue.
• Install the lower part of the rod in a bottle and fill it with sand or other suitable filler ( broken brick, rubble).
• Sides widen a little.
• Prepare a mortar from an ordinary plaster mixture, spread a piece of film, put a small part of the mortar in the middle and fix a bottle with a rod on it.

• Spread the solution evenly around the bottom with a brush dipped in water.
• Apply the mixture with a spatula and a brush on the sides and back of the craft with a thickness of 2 cm, remembering to wet the brush in cold water.

• With pieces of mesh, give the shape of curved wings.
• Press a part of the mesh into the place of the proposed wing and apply the solution, fixing this part.

Place supports under the finished wings (these can be bricks, trimmed beams, and so on), allow to dry well for the mortar to set for about one hour.

• Fasten the part of the mesh intended for the tail in the same way, remembering to substitute a support and let it dry.
• Go to the neck. With hands wetted in the solution, apply the solution little by little on the rod, helping with a brush. Form the head and beak.

• Next, with the help of a grid and a whip, we form a tail. Putty and support will allow it to be fixed correctly.

• Fix the finished neck with two bricks on the sides. Drying time - at least 2 hours. Draw the head, beak and body acrylic paints.
• In the bottom of the finished product, make several holes with a drill to drain water.

The finished planter - a swan with flowers planted in it will look great anywhere in the yard and garden and delight the eyes of the owners and others.

animal head

Flowers look great in vases, regardless of their cost. In summer cottages and apartments, when there is a desire to decorate your territory, you can make home-made flower stands in the form of an animal's head. An interesting option- pots in the form of a pig.

You will need materials:

• 1 large plastic water bottle;
• 4 plastic bottles of 1.5 liters;
• scissors;
• thin wire or liquid nails;
• acrylic paints.

The main efforts are directed to the design of the "flower head".

1. Place the bottle horizontally on the table. Cut a hole in the upper part for the pot with scissors (it is best to use manicure).
2. From the cut out part, cut out the ears and tail.
3. For the legs, use part of a small bottle with a cork.
4. Attach the legs to the body with thin wire or liquid nails.
5. Make small cuts for the ears and tail with scissors.
6. Insert parts and secure with glue.

Choice suitable model planter depends on the availability of source material and the interior of the living space. Bottles can be used for crafts different color, size and shape. The main thing is a sense of proportion and taste.

DIY flower pots from plastic bottles will become exclusive design decision for your home. Self-manufacturing- this is not only an exciting process, but also saving your money.

Manufacturing flower pots do-it-yourself is a fascinating process and saving your money.

The popularity of floriculture is growing. Almost every hostess is ready to boast of a variety of green pets. No flower can do without a pot. You will say that it is easier to buy pots in a store where there is a large selection of this kind of product.

But only handmade flower pots will differ in original decor. Why buy when you can make a real work of art with your own hands.

Pots from plastic bottles for flowers

There are many manufacturing methods. The most important thing is to turn on your imagination and, of course, prepare all the necessary materials.

For the first method of making a flower pot, you will need:

• plastic bottles;
• music disc;
• stationery knife;
• scissors;
• acrylic paint;
• glue gun.

The manufacturing process is simple. First you need to cut the plastic bottle into two halves. It is better to make its cut uneven: a pattern or a wave will look more interesting. It is most convenient to cut the bottle with a clerical knife. The next step in manufacturing is attaching an unnecessary CD to the bottle. From the side of the neck, use a glue gun to glue the disc. It is necessary to wait until the structure dries, and then paint it in any color with paints. It is better to take acrylic paint, because after drying it does not stain your hands and is not washed off. A flower pot from a plastic bottle is ready.

There is another very interesting and unusual way to make a pot from a plastic bottle. The peculiarity of this product is that the flowers will grow from the bottom of a plastic bottle. And after a while, when the flower pot is braided with a plant, the effect will be as if the flowers are floating in the air. It is important that when watering a flower, water will not pour out through the bottom.

Such a product is well suited for a home that has pets that can damage flowers, so flower pots made from plastic bottles are hung from the ceiling.

To work, you need to take:

• a 2 liter plastic bottle (the upper part should resemble a sphere);
• air building hair dryer;
• pliers;
• stationery knife;
• tourniquet or fishing line.

Dryer construction necessary for working with plastic.

The bottle must be placed in a vertical position and its upper part must be heated with a building hair dryer. It is necessary to warm up very carefully and evenly, especially at the bend. After the bottle has warmed up and softened, you should take the pliers and gently press the neck inward. Instead of a hair dryer, you can use an electric stove. Attention! The use of open fire is strictly prohibited. After the product with the depressed part has cooled down, it is necessary to cut off the bottom, as well as make holes so that the product can be hung. Then the roots of flowers are pushed into the hole, the earth is filled up. The result is a beautiful plastic bottle pot for decorating an air greenhouse.

A good solution for the garden and for open greenhouses will be the following product for flowers. For work you will need:

• several plastic bottles;
• scissors;
• thin rope or rope.

First, cut a rectangular hole on the side of the bottle so that you can easily place the plant there. It turns out something like a mini-flower bed. From below and near the neck of the bottle, you need to make holes for hanging the product. Holes should be even and symmetrical. The structure of the placement of such pots can be chosen at your discretion.

Do-it-yourself planters from plastic bottles

by the most in a simple way making flowerpots for plants is considered the following. It is necessary to take a plastic bottle of a size that is suitable for future planters. Then you need to cut off the lower part with a clerical knife, the height is chosen as you like. Next, you should carefully make holes in the sides of the product with an awl so that it can be hung. For decoration, original cutouts from the remains of a plastic bottle, for example, butterflies, flowers, funny figures, as well as stickers, appliqué, decoupage, are perfect. The product can be crocheted or painted in your favorite color with acrylic paints. A handmade planter will be a wonderful decoration for your home and garden.

Another manufacturing method is no less interesting and simple. An elegant planter will decorate any interior, and even more so if the house has a blank wall. To mask such walls, they usually use climbing plants. But it will take a long time to wait until they cover the entire surface. While the ivy is growing, you can hang the entire wall with beautiful planters. For manufacturing you will need:

• a wall with carnations that are driven in in any order;
• plastic bottles;
• cable, twine, fishing line;
• awl;
• scissors;
• stationery knife;
• the soil;
• flowers.

It is necessary to drive the carnations securely and firmly into the pre-cleaned wall at such a distance that the pots can be freely and beautifully located. It is recommended to leave gaps of about 10 cm between plants. Next, you need to cut the bottom of the bottle to the height you like. The edge may be curly. From the remains of the bottle, cut out the muzzles of animals and attach them to the front of the planter. From the sides, holes for the rope are made with an awl. The container is filled with earth in which the plants are planted. The pot is ready. Be sure to make holes in the bottom. If the planter is voluminous, then it is better to hang it on two carnations. In such a simple way, you can turn a gray, nondescript wall into a blooming garden.

Another option for making flowerpots: in the form of a so-called vase. For its manufacture it is necessary to prepare:

• scissors;
• rectangular bottle;
• rope;
• soil;
• plant.

It is necessary to cut 2 pieces of plastic along the bottle, not reaching the bottom, but with a good indentation from the neck. On the sides of the product, holes should be made at the bottom and several at the throat to ventilate the root system. Next, you need to insert a rope into the holes located at the bottom and fill the pots with soil to the very top. Then plant a flower in a flower pot and hang the product upside down in a suitable place.

Flowerpot from plastic bottles

Do-it-yourself flowerpots from plastic bottles will decorate any home, and almost everyone can make them. The first step is to cut off the bottom of the plastic bottle. For cutting, it is better to use a clerical knife, although ordinary scissors can work. A hole should be made in the bottom of such a size that the neck can fit into it. In a suitable place where the flowerpot is planned to be installed, it is necessary to dig the base. For it, you can use an old piece of wood, fittings or a piece of pipe. It should be noted that the height of the base should not be large.

Next, it is recommended to carefully pour sand and spill water to approximately the widest part of the product. The verticality must be well adjusted. Then you need to wait until the sand settles, and fill the flowerpot with soil. For safety, you need to cut the rubber hose and put it on the edges of the flowerpot. After that, paint the product. Spray paint is best. A product painted in metallic colors looks very advantageous: copper, bronze, silver, gold. Figures cut out of plastic bottles, butterflies, flowers, etc., are also excellent for decoration. If you attach a handle to a flowerpot, you get a pretty basket. You can fantasize ad infinitum. It's so easy to create masterpieces with your own hands.

The idea of ​​​​creating a flower pot from plastic bottle cannot be called new. However, I have not yet seen the named craft in such a performance. In fact, the container was originally intended for planting onions, which in the spring, while still in the refrigerator, begin to actively germinate.
Ordinary cups or boxes decorate the window sill a little, if not to say that they absolutely spoil it. appearance. Last year, my household members successfully planted onions in pots where flowers grew. The plants turned out to be quite friendly neighbors. The flowers did not react in any way to the appearance of the onion, and the uninvited guest, in turn, pleased the hostess with lush greenery.
This year, in order not to embarrass indoor flowers, I decided to make some flower pots from plastic bottles. Here is the result of one of the works.

For used:
- brown and white plastic bottle
- ready-made eyes for toys
- scissors
- pliers
- Fire
- pink nail polish
- adhesive for plastic, glass or wood parts.

First, cut the brown bottle in half to get a glass of the required height. Further from the upper part with a neck, cut out the head of a lion cub in the form of an irregular oval. Initially, the shape of the bottle contributes to the fact that our head will turn out to be convex.
We cut the edges of the oval into thin strips up to 1 cm long. This is how we imitate animal hair. We bring the ends of the strips to the flame gas burner, matches or candles for a few seconds. The plastic melts and acquires slight bends. The basis for the head of the craft is ready.

We again return to the top of the bottle with a neck and cut out the muzzle of a lion cub in the form of a figure eight from it. This detail is also convex. Traditionally, we melt the edges of the muzzle over the flame of the burner.

We cut out rings from white plastic, we make two strips from them. Then, with scissors, we cut the strips thickly along the length, leaving approximately 0.5 cm intact from the opposite edge. We melt the details over the fire, we get a fluffy mustache.

Then we cut out a drop from the remnants of white plastic and paint it in pink color. This is the language of the animal.

It remains to draw the tail of the lion cub. To do this, we bend half or even 2/3 of the brown ring cut from a plastic bottle in several places, and burn the tops of the bends with fire. Due to the deformation of the plastic, we get the curved line we need.

To decorate the tail brush, you need to cut one side of the rectangular plastic into thin strips, then roll the rectangle into a tube and burn both ends of the “brush” over the fire. The stripes will curl up and become curly. Next, we will attach the tail itself to the rounded base of the brush.

At the last stage, we collect the details together. First, we glue the head of the lion cub, then the muzzle, we attach the mustache, nose and mouth to the muzzle. Glue the eyes above the cheeks, and the tail from the back.