Automation and dispatching of engineering systems of the administrative and business center. Implementation of building automation systems Modern automation and dispatching systems literature
Any structure without communication systems looks lifeless and is of little value. Only connecting electricity, water and gas, heating and sewer systems to it allows you to use the building for its intended purpose. The totality of all communication systems that provide life b in buildings or structures, commonly called life support systems or engineering systems. In industrial premises, where communications are required not only to maintain the microclimate, but also to ensure production about the process, the volume of consumed resources increases many times over. At the same time, the need for accounting and control of the use of water, gas, electricity and the need to coordinate the work of all engineering systems. These tasks are solved by partial or full automation of engineering systems. TORELS LLC offers services for the design, implementation and debugging of automated th systems of dispatching and management of engineering systems.
OOO TORELS - turnkey solutions for automation of production and engineering systems
The specialists of our company offer a full range of work on the development of automation and dispatching of engineering systems. In each specific case, individual solutions are offered for a specific production: monitoring the operation of the system, preventing emergencies, accounting for consumption, the mode of operation and shutdown of devices, maintaining the optimal microclimate and the level of illumination of the premises. We offer rational cost-effective solutions for the automation of engineering systems:
plumbing and sanitation;
ventilation and air cooling;
power supply;
lighting;
heating;
gas supply;
warning systems (fire and burglar alarms);
special systems(intercom, dispatching, etc.).
Automation of engineering systems is a cost-effective project
Implementation of integrated or local automation and control systems engineering networks helps to avoid inexpedient use of resources, maintains a comfortable microclimate in the room, systematizes consumption accounting.The implementation of control and monitoring automation programs has a huge economic potential and a quick payback due to energy savings. Automation and dispatching of engineering systems provides safe operation industrial premises, shopping and entertainment facilities, sports facilities, medical and preventive institutions. The level of automation of engineering systems can be different: the organization of an automatic dispatch network, the installation of sensors, meters and switchboards or complex intelligent systems with software and the ability to control from individual mobile units. Practice shows that automation systems for managing engineering systems significantly reduce the operating costs of maintaining an object.
Building automation and control
residential and industrial building cannot exist today without engineering systems. And they are controlled by modern automation. The company "NHTA" is ready to provide a full range of services in this area. If you need automation of engineering systems, please contact us. We offer a variety of effective solutions based on the latest technologies. This will ensure a high level of system manageability.
Integrated automation and control of buildings
To increase the comfort of operation of various buildings, they are equipped with different kinds engineering infrastructure: ventilation, heating, air conditioning, systems fire safety and alarms. And to improve the efficiency of the equipment, sooner or later the question arises of combining all networks into a single whole. And in order to ensure a high level of reliability, automation of engineering systems of buildings is being introduced.
In the absence of automation, any engineering system requires constant and close attention to its work. Therefore, the introduction of automation has a number of advantages. These include:
- service mobility;
- reduction of operating costs;
- reduction in energy consumption;
- optimization of all work processes.
Also, automation of engineering systems helps to control the level of safety and reduces the risk of accidents. This happens due to minimizing the influence of the human factor and a more rapid response to ongoing changes. All this allows you to adjust work processes in a timely manner.
We invite you to cooperate
With extensive experience in this area, the company "NHTA" can offer high-quality and reliable equipment for integrated automation and dispatching. All equipment offered to you:
- fully complies with the standards existing in this area;
- has all the necessary certificates.
If you need automation of engineering systems of buildings, then the best option will contact us. We will create an optimal project taking into account the individual characteristics of the object, help you choose the best equipment and perform installation. Competent specialists will provide you with comprehensive information on all issues of interest and provide the necessary support. Cooperation with us will be comfortable and profitable.
Hardware Warranty
Major Equipment Warranty up to 3 years
Installation and design work insurance
All installation and design work at your facility is insured for 6,000,000 rubles
Obion performs design and installation of automation systems in Moscow and Moscow Region. We offer effective solutions for industrial enterprises, offices, residential complexes and country cottages. High-quality automation allows you to solve such problems:
- Quality control over the operation of all engineering systems and their individual elements is provided with minimal investment.
- Effective diagnostics of network elements and timely notification of the need for maintenance.
- Energy consumption is optimized by taking into account the time of day, climatic conditions, the number of people in the building and many other aspects.
- Reducing the risk of accidents at the facility and ensuring high level safety for people and property.
Types of automation
Automation and control systems for engineering systems are used to create a common mechanism for controlling the technical processes occurring in the building. Modern developments and ideas of scientists are being actively introduced into life, making it possible to make multifunctional facilities more productive and reduce production costs. The result can be achieved with the help of automated control of a complex of systems.Ventilation, air conditioning, fire extinguishing, video surveillance, heating - all networks and communications of the facility are taken under unified control using the management and dispatching of engineering systems. Automation and dispatching of engineering systems is aimed at replacing manual labor and eliminating the human factor in work. Most tasks are handled by automation. As a result, productivity is improved, costs are reduced and the speed of response to possible changes or emergencies (for example, in the event of a fire) in the building increases. Dispatching of engineering systems - modern solution on optimization of technical processes.
What tasks do automated systems solve?
The use of automated systems solves the following tasks:
- financial savings on the maintenance of the building;
- ensuring an adequate level of security for people in the building;
- unified control over the work of communications;
- prompt response to emergencies;
- prevention of extreme situations;
- reduction of the staff of the working personnel;
- transparency of operational processes.
As a result of competent design and high-quality installation of automated systems, resource consumption is reduced from 30% to 50% for each subsystem. Comfort in the room is provided in accordance with the set parameters (temperature, humidity). The staff is reduced, and the costs of the enterprise are reduced.
Before starting the project installation
We check it according to 3 criteria:
- Operability of all systems
- Compliance with SP, PUE, GOST R
- Opportunity for optimization
Automation and dispatching systems: types and features
Depending on the task, an intelligent building can be automated both partially and fully. Following the needs of the customer, technologists will offer an appropriate solution.
The project should be thought out even before the start of the construction of the building: this will provide an understanding of the entire range of work and a vision of the final result. Automation of the finished building will take large quantity time and resources.
Dispatching engineering systems of the building will ensure the automation of all processes and communications:
- power supply;
- lighting;
- water supply;
- heating;
- air conditioning and ventilation;
- firefighting;
- motorized blinds;
- security alarm;
- access control;
- communication networks;
- IP-monitoring of the object;
- building mechanization.
Benefits of a building automation and control system
Automation and dispatching of facilities takes care of all the routine work, which required a whole staff of personnel. The introduction of equipment allows to increase the level of comfort, safety and quality of work of employees.
Devices save time, provide efficient work subsystems, regulate the microclimate, protect equipment from loads. The capabilities of smart buildings depend on customer requirements − modern technologies allow you to implement a variety of ideas.
The main advantage of automation is in achieving increased efficiency of the building systems, its increased productivity and resource savings.
Automation of engineering systems can be implemented in every industrial sector. In already finished projects this will entail a complete reworking of production lines and serious costs, but the payback of the project will not be long in coming.
Engineering systems dispatching design
The design of automation and dispatching, entrusted to professionals, can minimize the cost of maintaining the facility in the future. Automated systems provide constant monitoring of the correct operation of equipment in real time.
The system is a certain hierarchy and includes three levels.
- Actuators, connections and sensors, which carry out control, collect data on the state and parameters of the equipment, transmit information to control devices.
- Control devices- controllers, input and output modules that ensure the interaction of all resources and monitor the operation. With their help, the operator can adjust certain operating parameters (for example, the performance of the hood or temperature regime). Some devices do not allow you to set manual adjustment and operate automatically (such as voltage stabilizers).
- Monitoring(the highest level of the hierarchy) - a computer control center in which control over individual communications is exercised. A technological system is created on the basis of a computer and controls the operation of each element, both individually and in combination.
The design of automation of engineering systems is necessary for objects whose communication networks are distributed over large areas and located in hard-to-reach places. For example, industrial complexes, entertainment and shopping centers, administrative buildings.
How is the automation of building engineering systems carried out?
The process of implementing automation and dispatching management includes the following steps:
- inspection of the object;
- project development;
- coordination with the customer and definition of technical specifications;
- finding a rational technical solution;
- drawing up installation schemes for the implemented equipment;
- development of individual projects for automation and dispatching of building engineering systems;
- integration of the dispatching project with the work of utility networks;
- software development;
- supply of equipment;
- development of budget documentation.
Automation of control and dispatching of engineering systems minimizes the cost of the production part and the work of personnel, makes being in the room comfortable, increases efficiency and helps to complete tasks in a short time.
Automation and dispatching of engineering systems with Obion
The specialists of our company are ready to assist you in creating a single intelligent system for managing technological processes at your enterprise. We will help develop a project in accordance with your needs, carry out installation and select everything necessary materials. Obion specialists have extensive experience in this field, which allows us to guarantee the high quality of the work performed.
If you have any questions, please contact us by phone or write to us on the website - we will be happy to answer all your questions.
- INTELVISION offers services for the design, installation, programming and commissioning of automation and dispatching systems for engineering systems and buildings (BMS) in Moscow, St. Petersburg, Kazakhstan and the CIS.
We are also software developers.
INTELVISION has created the first in St. Petersburg, which was recognized as the best in Russia according to the results of the Hi-Tech Building Awards.
Our portfolio includes objects for such customers as: Gazprom, YIT, Global, CMI-Development, Russian Railways, Hyatt, Marriott, Yota.
Smart Building Benefits:
- reduction in electricity costs - up to 60% for various subsystems;
- possibility ;
- downsizing of service personnel;
- increased comfort and safety;
- reducing the risk of accidents, reducing the insurance premium;
- increasing the attractiveness of the object for tenants;
- transparent operating processes;
- detailed information about the functioning of the building in a visual form.
INTELVISION specializes in the creation of complex building management systems and the integration of building subsystems into single system top level controls. The following subsystems can be combined into a single building management system (RMS - room management system, BMS / BMS, building management system):
- power supply;
- HVAC (heating, ventilation and air conditioning);
- technology-based lighting, DMX;
- water supply and sanitation;
- motorized blinds;
- automated fire extinguishing.
Energy efficiency of buildings
INTELVISION specialists have been trained under the certification program of the largest international system LEED green building assessments and are ready to provide comprehensive consulting support in project development . We have not only the necessary knowledge, but also real experience in creating energy efficient buildings. During the construction of the Alpiysky mixed-use complex, we applied a number of modern energy-saving technologies, thanks to which the complex can qualify for a LEED silver certificate. We will help you develop optimal solutions in terms of resource saving and energy efficiency in the field of- integrated building management systems;
- engineering systems;
building management system
Automation of buildings and automation of engineering systems of buildings begins already at the design stage of any modern complex. When developing projects for building automation systems, the tasks of managing heating systems, electricity supply, water supply and sewerage, lighting, ICT, etc. are solved. The higher the functional load, the more difficult it is to automate building engineering systems: for example, in large shopping, industrial and office complexes to traditional tasks building automation, such specific ones as air conditioning, security and fire fighting, telecommunications, etc. are added. Building automation assumes that all elements of engineering systems, having their own local control points, are combined into a common BMS intelligent building dispatching system.
INTELVISION offers design of building automation systems, equipment supply, installation, commissioning and technical support building automation systems and automation of engineering equipment, SMIS and SMIK systems based on equipment, Schneider Electric, Siemens, Wago, Phoenix Contact, at the request of the customer.
We are certified specialists in KNX, Lonworks, DALI, Bacnet, Modbus, PLC technologies, which we actively use in building automation projects.
