Pumping stations

Pine stairs painting. Stair painting

The bathroom testifies to the cleanliness of the owners of the apartment, so the bottom of the toilet bowl should just shine. There are special store-bought products that help clean the toilet knee well, however, they need to be used regularly. Some wonder how to clean the toilet from a urinary stone that has accumulated over a long time.

How to clean

With the help of improvised substances and devices and knowledge of how to clean the toilet to a shine, you can ensure complete cleanliness for a long time. It is quite possible to clean the toilet bowl to a shine with the help of ordinary caustic soda.

This tool is different in that it is able to corrode any substance and contributes to the high-quality and rapid elimination of fat. Cleaning should be done carefully, after putting on gloves.

remove all the water from the toilet;
pour cleaning bleaching liquid and wait 2 hours;
wipe the bottom of the toilet with a brush;
rinse everything with clean water.

With a little effort, you can perfectly clean the bottom of the toilet from rust, as well as various contaminants. After cleaning, the yellow-brown crust is removed, remaining from the urinary stone, which is almost impossible to remove with similar chemical means.

High-quality cleaning of the toilet bowl with the help of acids. Hydrochloric acid is able to quickly clean the toilet bowl, qualitatively removing the remnants of accumulated rust, any kind of pollution, including the existing urinary old stone. A very good tool is Silit, which contains acid in its composition. It is not worth leaving pure acid in the toilet for a long time, because it can significantly damage the surface layer of the enamel. This product must first be diluted with water and washed off a few minutes after application.

You can perfectly clean the bottom of the toilet bowl with vinegar. It is best to use vinegar concentrated essence for these purposes. It is quite possible to use sulfuric acid removed from the battery, because it acts as an electrolyte. This will help get rid of severe rust very well.

If you need to qualitatively clean the toilet from limescale and disinfect the surface, killing all germs, you need to use bleach. It will perfectly whiten and help eliminate yellow plaque, you just need to clean the surface with a brush. Many are interested in how to clean the toilet to get rid of yellow plaque and lime deposits. For these purposes, pumice stone is perfect. It is best to use such a tool attached to a special stick. Combined with various cleaning abrasives, pumice stone helps to remove even blockages.

Perfectly helps to fight plaque and existing urinary stone and oxalic acid, which even saves from rust and can be used in combination with other means.

How to eliminate pollution in the most neglected cases

It is very difficult to clean an old toilet, however, nothing is impossible. Its surface layer is no longer so smooth, because it is badly scratched and damaged. Even with regular cleaning, it will gradually become more and more polluted with various substances. For this reason, many are interested in how to remove a stone in the toilet, the surface of which is no longer so even and smooth.

Perfect for cleaning an old Coca-Cola toilet bowl, which will help to give an excellent whiteness and shine to the toilet bowl. Pour 1 bottle of carbonated drink into the toilet and leave for 2 hours. This is just a great tool for cleaning the toilet from urinary stone and accumulated limescale. Whatever cleaning mixture is used, certain precautions must be observed:

do not lean very close to the toilet so that harmful fumes do not enter the respiratory tract;
be sure to wear rubber special protective gloves;
care must be taken to ensure that the agent does not get on skin or in the eyes.

If there is an allergic reaction to chemicals, it is best to use more natural products that are added to the bottom of the toilet (pre-remove water and blot with a rag).

How to clear blockage

The remains of greasy and rough food poured into the toilet, and other blockages can cause obstruction of sewer pipes. clean very heavy blockage a plunger or a large ordinary plastic bottle will help, in which you must first cut off the bottom.

By making certain pushing movements, it is quite possible to reduce the resulting plug so that the water begins to drain freely. And the cable will help get rid of excessive blockage, but at the same time it must be used wisely.

In addition to mechanical methods for cleaning the toilet, there are also chemical means. Hot water will help clear the blockage from the inside of the toilet. To eliminate the blockage, it is necessary to pour a bucket of boiling water into the toilet, which will help to clean the pipes very quickly and efficiently.

The cleaning process must be carried out very carefully, because the coating may crack from a sharp change in temperature. hot water you need to pour very slowly so that the surface has time to warm up well.

Do not forget about a variety of specialized tools that are designed to clean the drain. However, you must strictly follow the rules for the use of such products, this will help to perfectly eliminate the blockage caused by the accumulation of contaminants.

What needs to be done to shine

To keep the toilet very clean and shiny, you do not need to use excessively strong chemicals. All you need to do is keep your toilet clean. Additionally, you can add a special tool to the tank, which will serve as auxiliary protection. To maintain the cleanliness and shine of the toilet, it is necessary to take into account the existing rules:

you need to ensure that water does not constantly flow out of the tank;
no need to pour out the remnants of fat and throw food into it;
need to be constantly cleaned with a brush;
should be washed regularly with specialized detergents and bleaches.

It is worth remembering that it is much easier to keep new products clean all the time than to devote a lot of time and effort over time to clean them from heavy pollution, spoiling a smooth surface.

Urinary stone is a persistent yellow-gray plaque that forms on the toilet bowl during long-term use of plumbing. This contamination sticks to the surface so strongly that it is simply impossible to wash it off. Many housewives are looking for a way to wash the urinary stone in the toilet and is it possible to return the perfect look to the “white friend”? We will show you the most powerful and effective ways to clean the toilet from yellow plaque - from chemicals to home methods.

Urinary stone is a limescale deposit containing particles of urine, feces and rust. It is these components that give pollution a persistent and bad smell. Limescale in the toilet bowl is a fertile breeding ground for harmful bacteria, so you need to know how to wash the urinary stone in the toilet bowl and what causes plaque.

Most often, a urinary stone forms for the following reasons:

Untimely and insufficient discharge. This problem occurs in homes where there are small children, and also due to the banal laziness of the owners and guests. Rinse regularly after each use so you don't have to search for.
Tank malfunction. Poor tank performance can cause insufficient drainage, causing urea to accumulate on the walls, and over time, fetid yellow spots form under the rim.
Defects and rough surface of plumbing. Rough walls with chips and protrusions are excellent conditions for the accumulation of dirt and the reproduction of microbes.
Old plumbing with a long service life. Rusty pipes, a Soviet-era toilet, and a faulty cistern are one of the main causes of urinary stones. In this case, it is worth replacing the plumbing with a new one, otherwise the urinary stone will appear again and again.

Cleaning the toilet from urinary stone

If your toilet is so dirty that it cannot be cleaned with a brush, and you are squeamish about using plumbing and inviting guests into the house, you cannot do without deep cleaning. Best time for cleaning - the end of the day, so that the product has time to act overnight. In this case, you do not have to rub and scrape off plaque from the walls for a long time. Before starting work, turn off the tap from the tank to the toilet and press the drain. Bail all the water out of the toilet with a jar or soak it with a sponge.

During operation, be sure to protect your skin with gloves - you will have to deal with aggressive chemicals. Put on a respirator and make sure that splashes do not get into your eyes.

Get a toilet cleaner. It can be a special gel (“Domestos”, “Toilet Duck”) or a paste made from improvised means. Apply to areas of urinary stone accumulation and under the rim, then leave overnight. It is not recommended to use the toilet during this time.
In the morning, scrub the toilet with a brush until the stone begins to fall off. Metal brushes should not be used to clean plumbing as they can scratch the enamel.
If plaque remains, repeat the procedure several times.
Keep children and pets out of the bathroom while cleaning the toilet, as harsh cleaners are dangerous.

We use improvised means

You can deal with mild pollution with the help of improvised means. If you are looking for how to clean the toilet from a urinary stone, try one of these recipes:

Bleach. The chlorine-containing liquid is aggressive, but it perfectly dissolves the urinary stone. Please note that "Whiteness" and other bleaches do not work in water, so the toilet must be dry. Pour chlorine liquid on the walls and leave overnight.

Vinegar. This recipe will help to cope with the water stone. Take a little acetic acid 9%, heat to boiling water, then dissolve 50 g of soda and a teaspoon of iodine in it. Mix everything thoroughly and pour it over the walls of the toilet bowl, leaving it overnight. Vinegar fumes are quite dangerous, so try not to inhale them while cooking.

Lemon acid. This simple remedy perfectly dissolves urinary stone. Pour 3-4 sachets of powder down the toilet, wait a few hours, then flush. Citric acid will not cope with large contaminants, but it will easily eliminate small growths.

Anticalc will help restore the shine to the toilet. Take some powder and pour it into the toilet in the evening. In the morning, you will notice that the plaque will begin to fall off in pieces. Take a brush and remove the remains of the stone.

Urinary stone is perfectly eliminated carbonated drinks. Take a jar of Sprite or Coca-Cola and pour it down the toilet at night. If the plaque has settled on the walls, attach a cloth soaked in a drink to them. The next morning, the stone will begin to move away in pieces, and it will not be difficult to remove it. The disadvantage of this method is its high price. Citric acid is cheaper, but it works no less effectively.

Help household chemicals

How to remove stone plaque in the toilet using store products? On the market today you can find a lot of powders, gels and liquids for cleaning the toilet, which will cope with the urinary stone quickly and easily. Many of these preparations contain convenient dispensers, with the help of which the liquid easily enters under the rim of the toilet without coming into contact with the skin.

Using commercial plumbing cleaners is pretty easy. Apply the gel or liquid to the rim of the toilet, leave for about an hour, then rinse with water. The urinary stone will dissolve, leaving a pleasant light scent of pine needles or citrus.

The most famous and effective chemical agents are Domestos, Toilet Duck, Silit Bang and others.

Strong chemistry to fight urinary stone

If none of the above can cope, only heavy artillery can help - strong chemicals. When working with them, observe safety precautions, and store the substances themselves in places inaccessible to children and animals.

Orthophosphoric acid. A concentrated substance of 5-7% perfectly dissolves water stone without affecting plastic or rubber. When working with it, protect your hands with rubber gloves. Orthophosphoric acid fights not only limescale, but also dissolves rust, so it can save a rusty tank. Pour 100 g of acid into the tank and the same amount into the toilet bowl. Empty the tank, rub the toilet bowl walls with a brush and flush the entire system big amount water.

Battery electrolyte. This tool can be purchased at automotive stores. The substance is based on concentrated sulfuric acid, so it should be used very carefully. The electrolyte should not be used frequently, it is suitable only in very advanced cases. Protect your eyes and skin when handling.

Hydrochloric acid. This strong substance with 53% active ingredient is dangerous for plastic pipes because it corrodes plastic. When working with hydrochloric acid, be sure to turn on the hood so that the vapors of the substance do not enter the lungs. Pour a glass of acidic liquid into the toilet and spread it over the walls with a brush. Close the lid to prevent acid fumes from spreading around the house, and rinse with water after 15-20 minutes.

Prevention of urinary stone formation

As you know, urinary stone is formed on old and neglected plumbing, which is not cleaned for a long time. To keep your toilet looking like new all the time, clean it regularly with special products. With small pollution, household chemicals will do just fine - from the usual "Whiteness" to the advertised "Domestos".

Prevent urinary stone formation and fill the toilet pleasant smell can special balls and stickers that are attached under the rim and refresh the water with each rinse. Such devices will provide disinfection and excellent prevention of stone growths.
Check the condition of the drain tank. If you have hard water, install a special filter in it that will prevent build-up.
Use a brush after each flush, make sure that there are no fecal residues on the walls.
Take care of the surface of the toilet and do not use abrasive products. Damaged enamel is the place where stone growths appear most often.
Do not pour hot food down the toilet. Because of this, microcracks can form.
Replace old rusty pipes with new ones.
If the toilet is too old and damaged, don't waste your money on replacing the plumbing. Install a new toilet and keep it clean regularly so that a urinary stone does not bother you anymore.

Any types of contaminants must be removed in a timely manner, the main thing in the question of how to clean the toilet bowl is to choose a detergent in time and clean up unpleasant deposits at the initial stage. In addition to professional cleaning products, there are many folk recipes that can provide excellent results in this case.

It is much easier to find the right remedy than to wash the toilet from yellow plaque, if you know the origins of this problem. The main reason for the constant contamination of the plumbing fixture is the constant leakage of water. A thin stream of liquid brings with it metal oxides and calcareous substances, which settle down and can reach a centimeter layer in a couple of years. The second reason is an old rough toilet bowl, on smooth porcelain or earthenware, dirt is deposited much more slowly.

The main types of deposits on the toilet:

How to wash the rust in the toilet?

Solve the problem of how to wash the toilet inside, where there is water, from old rust, you can use proven factory detergents. Acids, alkalis or abrasive powder preparations are suitable for this purpose. Depending on the cost of the substance, they work at different speeds and efficiency. Acid or alkali can simply be poured into water, wait a few minutes and rinse with water, all the dirt dissolves and goes down the drain. It is tedious to work with powders, it is required to carefully clean the ceramics with the selected ones, they are able to scratch the surface.

Examples of anti-rust cleaners:

Abrasives- Pemolux, Sarma, Komet.
Alkaline preparations- Domestos, "Every day" (cleaning gel).
acids- orthophosphoric acid (100 g of an 85% solution per 0.5 l of water), Cillit, "Toilet duck".

How to clean the toilet from limescale?

When thinking about how to clean the toilet from lime deposits, you need to pay attention to acid detergents. The potent substance is an automotive battery electrolyte, consisting of a solution of sulfuric acid and distilled water. Industrial grade 33% sulfuric acid has powerful cleaning properties and is suitable for the job. It is necessary to work with the listed drugs very carefully, they emit vapors dangerous for the body.

We solve the problem of how to wash the plaque in the toilet bowl with the help of acids as follows - we pump out water from the device, distribute the reagent over the surface of the toilet bowl, hold for 20 minutes (several hours, depending on the degree of contamination). Next, rinse the surface with water and repeat the process if necessary. When cleaning the toilet, be sure to protect the vital organs with a respirator, goggles, gloves.

How to clean the toilet from a urinary stone?

The solution to the problem of how to clean the toilet inside from a urinary stone can be done with the help of whiteness. We pump out the liquid from the device, pour a bottle of working solution inside and leave it overnight. If necessary, the next night, repeat the work to achieve an acceptable result. You can wash the toilet from urinary stone with oxalic acid, electrolyte, Cillit, Toilet Duck and other universal cleaners.

How to wash the blackness in the toilet?

It is always easier to take preventive measures rather than expect heavy contamination or test strong acids and reagents at home. In solving the problem of how to properly clean the toilet from mud deposits of any origin, deodorizing tablets for cisterns and drain holes help. They remove rust and other dirt from the walls and parts of the mechanism, have a whitening effect, kill microorganisms, and prevent the formation of urinary and limestone.

Examples of toilet bowl cleaning tablets:

Liara;
Kobayashi (Japan);
Aro "Sea Breeze";
Cubes Bref;
SALIX "Sea";
Kobayashi Bluelet Dobon Bleach (Japan).

How to clear a blockage in the toilet?

You need to know not only how to descale the toilet, but also be able to remove the strong one that prevents the normal discharge of water into the sewer. The pipeline may become clogged different reasons, often this problem is caused by the negligent attitude of the users themselves or childish pranks when a large amount of paper or household garbage gets inside.

How to clean a clogged toilet:

Simple blockages are eliminated by a bucket of boiling water, quickly poured into the sink to create a strong pressure.
Pour half a pack of baking soda into the toilet, after a while drain the dirt with water and clean the surface with a brush.
The use of household chemicals - "Mole" or its analogues.
Use a plunger with a bowl up to 10 cm in diameter.
In the absence of a plunger, a cut plastic bottle or a “pusher doll” made from rags wound around a stick is used.
In severe cases, when all of the above methods, how to clean a home toilet, do not help, we call a plumber, or we use a flexible cable ourselves.

How to clean the toilet bowl?

Mineral salts can be deposited inside the tank, fixed on the walls, and damage the mechanism. Exist different models plumbing fixtures, it is advisable to first familiarize yourself with the device diagram, which is always supplied with a passport. In the task of how to clean the toilet cistern, a lot depends on its design. Often, its lid is screwed tightly to the drain mechanism. It is necessary to turn off the water and unscrew the tank, remove the float and other elements, treat the parts and walls of the drain tank with detergents.

Means for cleaning the drain tank and mechanism:

Domestos;
white;
Cillit;
Sanox gel;
Dosia;
Tyron.

We clean the toilet with folk remedies

In addition to household chemicals for washing plumbing, many people prefer to use folk recipes. When thinking about how to clean the toilet at home safely and with a lasting effect, first examine the food supplies in your kitchen. There are many here good drugs, which do not damage the skin of the hands and qualitatively remove raids of various origins.

How to clean the toilet with Coca-Cola?

Phosphoric acid and other ingredients that are present in this drink help to remove dirt in pipes and scale. If you want to learn how to clean the toilet with Coca-Cola, then you need to buy a couple of bottles of refreshing liquid. We flush the device with water, pour the contents into the toilet at night or apply rags soaked in our reagent to the dirty surface. In the morning, wash off the sink with water and clean the surface to a shine with a brush, removing any remaining dirt.

How to clean the toilet bowl with vinegar?

Simple and available ways how to clean the toilet with baking soda and vinegar are the most popular among the people. It is better to take not apple cider vinegar for work, but a 9% solution or 70% vinegar essence. Pour a glass of reagent into the pan, cover it with a lid, heat the contents on the stove to 50 ° C. You can enhance the effect of the solution by adding a tablespoon of soda or iodine (1: 1) to it. We pump out water from the toilet, apply wipes soaked in the reagent to the contaminated place, wait from 2 to 6 hours and remove the remnants of plaque with a plastic scraper or brush.

How to clean the toilet with citric acid?

If we regularly clean the toilet with folk remedies, then there is no need to purchase imported chemicals or powders made on the basis of strong acids or alkalis. A few sachets of citric acid cost a little, but they can help with serious problems in the bathroom or toilet. We apply the powder to the sink, trying to cover all the problem areas with it, wait 2-4 hours (preferably until the morning), carefully clean off the remnants of plaque with a brush or rag. For the best effect, you almost always have to repeat this procedure 2-3 times.

How to clean the toilet with a cable?

A professional cable, which is used to clean sewer pipes and plumbing fixtures, looks like a flexible spring made of thick and strong wire. If you can not cope with the problem of how to clean the toilet with chemicals, then this tool will help you effectively do this job. mechanically. It has a spiral end that allows easy penetration into any small holes. A rotating handle is installed on the front, which facilitates the work of cleaning the sewer.

How to clean the toilet with a plumbing cable:

We lower the cable inward, pushing the spiral with rotating movements.
We turn the handle in one direction, trying to pass the bend of the pipe.
Faced with a blockage, we continue to turn the handle, trying to break through the layer of dirt.
If the cable rests against a dense barrier, then we scroll the handle in the opposite direction, pull it out and, if necessary, remove pieces of debris from the tip.
We repeat the procedure.
When the plug begins to move further, we continue to screw in the cable with rotational movements, pushing the blockage as far as possible into the wide drain pipe.
If it is required to clean a plastic pipe, then a protective plug is put on the end of the steel wire.

Toilet cleaner

Almost all popular brands involved in the production of household chemicals produce cleaning products for plumbing fixtures. It has already been tested in practice, if we clean and wash the toilet bowl with a quality preparation, then we get toilet room guaranteed success and long-term effect. A small rating of detergents will help determine the best choice and purchase good household chemicals.

Cleanliness in the toilet is one of the priorities of a conscientious hostess. All items in the bathroom are kept clean not only for aesthetic reasons, but also for hygiene purposes. The toilet is no exception. This item of plumbing must be washed from ordinary daily dirt and periodically arranged for a general cleaning: wash all parts of the fixture (cistern, lid, toilet seat, etc.) and prevent the appearance of rust, stone, plaque. Otherwise, the toilet will become a breeding ground for bacteria or even become clogged and cause a lot of unpleasant trouble. There are many ways to clean surfaces from dirt.

How to clean the toilet

Today, the range of cleaning products for plumbing is very wide. But in addition to household chemicals, there are folk recipes for compositions. We list the main folk and professional tools.

Folk remedies

Folk recipes for cleaning the toilet are designed primarily for regular care. Old deposits and pollution will require special professional tools.

Vinegar. Heat a solution of 9% vinegar to 40 - 50 degrees, after covering the container with a lid. For the procedure, one glass of 250 ml is enough. Add one tablespoon of soda and a drop of iodine. Pour the toilet with this solution or apply a damp cloth to the dirty place. Wait two to six hours and proceed to remove the dirt. This product is suitable for removing lime scale, as the acid corrodes mineral deposits.
Vinegar helps in the fight against limescale on the walls of the toilet
Lemon acid. Citric acid, like vinegar, will help get rid of plaque and urinary stone. Cover the dirt with citric acid crystals and leave overnight. The powder should not remain completely dry, it is necessary that the acid is wetted to the consistency of gruel. The amount of the product depends on the area of the dirty place. If lemon acid did not help from the first application, you can repeat the procedure. Some housewives advise adding wood ash to citric acid, which will give the effect of foam.
Crystals of citric acid will serve as a cleaner for the toilet
Baking soda. Baking soda helps remove dirt various surfaces. It can also be used to clean the toilet bowl. Sprinkle baking soda on dirty areas and leave overnight. In the morning, thoroughly treat the stains with a brush or sponge and rinse with water. Repeat as needed. Another way to clean with baking soda: pour baking soda on the surface to be cleaned and wait half an hour. Then pour in the vinegar and, while the reaction is going on, wipe with a brush. Soda will help in the fight against greasy deposits and disinfect the surface, while acetic acid will cope with limescale and rust.
Baking soda is an all-purpose cleaner
Coca Cola. Finally, to make the toilet shine, you can pour the well-known cola into it, which includes phosphoric acid. She will remove plaque and stone. It is better to fill in at night, so that the remedy is guaranteed to work.
Mustard powder. Mustard is perfect for everyday cleaning - it disinfects and washes off the greasy film. Mix dry mustard (1 tbsp.) With starch (100 gr.) And citric acid (1 tbsp.). Add water to make a slurry and apply to the walls. After a couple of hours, wipe with a sponge. Mustard cannot cope with old plaque and rust, therefore, with a thorough cleaning, it can only be added as a disinfectant.
Mustard powder can serve as an antimicrobial agent

professional tools

The composition of special tools includes strong acids, alkali or chlorine. Therefore, before using them, take care of your safety: put on rubber gloves, protect your respiratory organs. Unlike folk "soft" cleaners, professional household chemicals quickly cope with dirt on the surfaces of the toilet, acting more aggressively.

Oxalic acid. The product is sold in pharmacies and hardware stores. Apply this powder to a wet rag and rub the contaminated area. If possible, pour the acid into the toilet and leave it overnight. There are also professional products based on oxalic acid - Sanoks Ultra, Sarma - gels of domestic production.
Oxalic acid corrodes deposits on the walls of the toilet
Orthophosphoric acid. A 5-7% solution of this acid will do an excellent job of removing dirt in the toilet bowl. Moreover, this tool can be poured into the tank. plastic pipes when using phosphoric acid will not suffer. Pour acid into the toilet and cistern for 15 minutes, then wipe thoroughly and flush. This product removes rust and lime scale. But you can buy a miracle reagent in car dealerships or in stores specializing in radio products, since orthophosphoric acid is used for soldering for its intended purpose.
Phosphoric acid helps eliminate rust
Chlorine. Quite often in public toilets we encounter a pungent smell of chlorine. This is not surprising, since chlorine has antibacterial properties and is excellent at bleaching, which is why it is used in common areas. But at home, it is not recommended to regularly use chlorine for cleaning, because it can damage the ceramic surface of the toilet bowl, and it is harmful to health. But in isolated cases, such a tool can still be used. Especially if you need to properly disinfect and whiten the bowl. The well-known bleach based on chlorine "Whiteness" is suitable for everyone. Apply "Whiteness" on the surface, and after half an hour wipe with a brush or sponge and rinse with water.
Whiteness bleaches and disinfects
Hydrochloric acid. There are tips on the Internet for using a hydrochloric acid solution, but in its pure form it is very dangerous, so we recommend using only products based on it: Silit Bang, Toilet duck, Domestos. In addition, all professional products are equipped with a convenient thin spout for cleaning the surface under the rim and have a thick gel consistency. In addition, many packages with factory products have child protection.
Domestos contains hydrochloric acid
Pemolux. Pemolux is a soda-based cleaning powder. The composition of Pemolux also includes marble chips, surfactants and fragrances. The effectiveness of Pemolux is achieved due to the abrasive structure. Therefore, it is good for them to clean plaque and urinary stone. Before using the powder, pump out all the water from the toilet. Pour the product on dirty areas and rub with a sponge. The downside is that the powder scratches the surface, and dirt is further clogged into microcracks.

Do not use electrolyte for cleaning, as some sites advise. The risk of getting a chemical burn outweighs the possible effectiveness.

It is worth noting that if you have a colored toilet, then you should not use products with citric acid and chlorine. They can bleach the surface or leave streaks.

To summarize: folk remedies safe, but require a lot of effort and time to clean. Special funds dangerous to health, but when used correctly, they cope with cleaning more efficiently and faster. The choice is yours.

How to wash the toilet properly

When the tool is selected, proceed to cleaning.

Instruments

For washing you will need:

Let's start cleaning

To be satisfied with the results of cleaning the toilet, follow the following procedure:

Clean everything around the toilet to avoid splatter. Do not place your funds and tools on the tank: they may simply fall inside.
Before cleaning the toilet bowl, remove water from the toilet with a plunger.
If sand has accumulated inside, which is not washed off by a simple drain, try pouring a bucket of water at the same time as draining and work with a plunger. The sand must go.
Wet the inside of the toilet with warm but not hot water. This will make it easier for your product to deal with dirt.
Apply the cleaner to the dirty areas inside the bowl, not forgetting the surface under the rim. The time to wait after application depends on the type of product, but not less than 30 minutes. This is necessary to disinfect the toilet bowl.
While the remedy is in effect, we proceed to cleaning outer surface. Start at the top: wipe the tank, handle, lid. To do this, use the same tool as for the inside of the bowl.
Wash the seat thoroughly and wipe it dry.
Apply the product to the hinges on which the seat is attached and clean with a hard sponge or brush. An ordinary rag will not be able to reach all sections of the loops.
After the seat, wash the glass - the lower part.
Next, we return to the inner surface and, using a brush or sponge, rub the product and clean it from dirt. Be sure to clean under the rim, where a lot of dirt and bacteria accumulate. Then we wipe the bottom of the bowl, and then we clean the drain to the bottom.
Close the lid and drain the water with the remnants of the product.
After cleaning, do not leave the brush wet in the tray, but dry it by placing it under the toilet lid - the water will drain into the bowl. This way you will avoid the growth of bacteria in the tray and the unpleasant smell in the toilet.

Preventive measures

In order not to have to deal with rust, stone and plaque, prevent their appearance by following these recommendations:

don't let direct current water, for this, monitor the good condition of the drain tank;
do not throw food leftovers into the toilet, especially fatty waste;
use devices that maintain cleanliness at each drain - discs, tablets, containers with washing gel, attached under the rim;
Wash the toilet bowl with a cleaning agent at least once a week.

Toilet cleaning. Video

To ensure that plumbing always pleases the eye and does not become a source of disease, clean the toilet regularly, using adequate means and methods. And timely prevention will save you from additional efforts when cleaning the toilet.

Good housewives always have perfect cleanliness in the house. This also applies to plumbing. But sometimes after long-term operation and with rare preventive cleanings, various contaminants appear under the rim and on the walls of the toilet bowl, which can be very difficult to eliminate. This problem is not very pleasant, but it can be dealt with fairly quickly. Let's find out what means (and how exactly) you need to clean the toilet so that it stays clean.

Causes of pollution

Before deciding how to clean the toilet, it is necessary to classify the pollution and understand the cause of its occurrence. The following types are considered the most common:

urinary stone;
lime scale;
Yellow plaque;
Rust;
Black.

Photo types

Urinary stone appears due to stagnation of urine in the toilet

Limescale is caused by the deposition of minerals found in the water.

Yellow plaque appears due to clogging of the hole from which water is supplied

Rust often appears due to a faulty cistern

Blackness appears due to the constant presence of water at the same level.

And now let's find out the cause of the occurrence of one or another type of pollution. So:

Urinary stone appears due to the forgetfulness of the "users" of the toilet. After defecation, a person may forget to flush the water. If this is repeated often, the urine dries up on the walls, which leads to the appearance of stains, and subsequently urinary stones. Getting rid of them is quite simple, but it is best to simply not bring the matter to their appearance, cleaning the plumbing in a timely manner.
Limescale is a deposit of minerals contained in water on the walls of the toilet bowl. It should be noted that they are present both in river water and in well water. Thus, the more often you flush the toilet, the more likely it is that the problem will get worse.
Yellow plaque is removed very quickly. But if you start the situation, he can become main reason clogging of the holes through which water is supplied to clean the inside of the toilet.
Rust most often appears due to a faulty tank. If even a small trickle of water constantly flows from it, over time it forms a rusty stripe. It is necessary to fix the tank, otherwise this problem will haunt you all the time. It should be noted that the more iron is contained in the water, the faster the rusty coating will appear.
Blackness appears in the place where water lingers. This is the simplest problem and the easiest to fix. You just need to regularly work out the inside of the toilet with a brush, especially in the place where the water level ends.

Helpful Hint: On the rough surface of the inside of the toilet, plaque builds up much faster. Therefore, in some cases it will be easier to simply buy new plumbing with a perfectly smooth surface.

How to clean folk remedies

If you have already “launched” the cleanliness of the toilet, and even a brush does not help, you need to resort to folk methods to eliminate pollution. Folk ways can be used in private homes with a local sewer system (septic tank) and plastic pipelines.

Helpful Hint: When cleaning the toilet bowl, for safety reasons, it is necessary to protect the respiratory organs and hands from the ingress of toxic fumes and cleaning agents. Use rubber gloves and a respirator. Also protect your eyes from splashes.

table vinegar

Table vinegar will help get rid of limescale and urinary stone in the toilet

Table vinegar can dissolve limescale and urinary stone at home. To do this, apply it to contaminated areas and leave for a while. Before proceeding with the procedure, you need to pump out the water from the toilet and wipe the inside of the bowl with a dry cloth. After that, moisten a napkin with vinegar and apply it to the problem area. After about 4-6 hours, clean the plaque with a scraper or brush. Repeat if necessary. To enhance the effect, first warm the vinegar to + 50 ° C, and then add baking soda(300 g of vinegar will need 1.5 tablespoons of soda) or iodine solution (in equal proportions).

Technical oxalic acid

Technical oxalic acid will help get rid of urinary stone in the toilet

Technical oxalic acid looks like small colorless crystals. This is a fairly effective tool with which you can get rid of urinary stones. It is poured under the rim and aged for about an hour. Oxalic acid crystals can also be diluted with water or alcohol. The effect will be about the same. After 60 minutes, wipe the smeared surface with a cloth and clean with a ruff.

Lemon acid

Citric acid will help get rid of plaque and yellowness in the toilet

Citric acid is an inexpensive substance that can be bought at any store. It does an excellent job with a lot of dirt, including stone deposits and yellowness on the toilet. A couple of sachets of citric acid will break up plaque and stone in about 12 hours. To achieve maximum effect, it is better to repeat the procedure 3 times in a row. Citric acid is one of the substances that can return your plumbing to its perfect look.

Baking soda

Baking soda will help get rid of plaque in the toilet

Baking soda is also effective in removing plaque from the toilet bowl. It is necessary to pour it in large quantities on places of severe pollution and leave it overnight. In the morning, rinse off the water and rub the brush on the places where soda was applied yesterday. If the first time it was not possible to remove all plaque, repeat the procedure.

Soda water, Coca-Cola

With the help of Coca-Cola you can remove any dirt from the toilet bowl

Soda, which contains a large amount of citric acid, can clean any toilet bowl contamination. The best way in this category is Coca-Cola. To clean the plumbing, you will need several bottles of soda. Pour sweet water into the toilet at night. In the morning you will not notice the slightest trace of pollution, as it will corrode everything. You can also simply moisten a rag with carbonated water and put it inside the toilet bowl on the contaminated surface. Efficiency will not suffer from this.

Chemicals

Before using this or that chemical agent, it is necessary to read the instructions without fail. Before using chemicals, protect your hands and put on a mask so that you do not inhale the acids and alkalis contained in such products during the cleaning process.

Good to know: Some chemicals cannot be used to clean the toilet if you have plastic sewer pipes or local treatment plants (septic tanks).

Liquid acids and alkalis

There are dozens of toilet cleaners on the market.

Phosphoric acid (5-7%). With its help, you can not only clean the toilet, but also eliminate corrosion of the internal parts of the drain tank. Pour approximately 100 ml of the acid solution into the cistern and toilet bowl, leave for 10-20 minutes, then rinse with water and clean the surface with a ruff or brush. Orthophosphoric acid is quite cheap, but in this case the price has nothing to do with efficiency. Note that phosphoric acid does not affect rubber and plastic. It must be used with extreme caution, be sure to wear rubber gloves!
A solution of hydrochloric acid (33%) is a very active substance that can be used to clean the toilet bowl. When working with her, you must be as careful as possible. Be sure to take care of your hands and try not to breathe fumes. It will be enough just to wipe the contaminated areas with an acid solution, and then pour one glass of liquid into the toilet. This is enough to completely clean it, just wait 20 minutes. At this time, it is advisable to cover the toilet with a lid. Please note that hydrochloric acid cannot be used if you have plastic water pipes. This substance is contained in the products of the brands "Cillit" and "Toilet Duck".
Liquid battery electrolyte. As a rule, car owners use it, but sulfuric acid mixed with distilled water can also clean your toilet. Even if the raid seems "eternal". It is necessary to apply and withstand battery electrolyte according to the same rules as hydrochloric acid. This product is not suitable for regular use.
Chlorine. Today, there are many cleaning products based on chlorine. Among them - both the usual and inexpensive whiteness, and the advertised imported "Domestos". It is important to know that drugs that contain chlorine in their composition have an extremely negative effect on health. Despite their high efficiency, it is highly undesirable to use them on a regular basis. What is the correct way to use chlorine? Apply it on dirty areas and leave it on for 40-60 minutes. Then wash the toilet with a brush and drain the water.

Useful information: Some people advise pouring "Whiteness" directly into the drain tank. This method is quite effective, but it is extremely dangerous for the female reproductive system.

Popular cleaning products. Household chemical stores offer a huge range of products designed to combat old pollution and plaque on the toilet. They are available in the form of gels, creams or solutions. Often applied for 40-60 minutes under the rim, after which the toilet is cleaned with a brush. The procedure can be repeated several times in a row if it was not possible to immediately eliminate all contamination.

Abrasive powders

Caution: the abrasive powder may scratch the earthenware.

All abrasive cleaners that are sold in stores clean the toilet well. But small granules often leave micro-scratches on the faience coating. Because of this, limescale will soon reappear.

If there is no alternative abrasive option, use abrasive cleaners as follows: pump out all the water from the toilet bowl and pour cleaning agent into it (the exact amount is indicated in the instructions). Then leave the remedy for at least half an hour so that it begins to act. After that, start cleaning the surface. Use a brush or hard steel wool. You need to rub until the pollution is completely eliminated. Of course, this procedure is unpleasant and rather tedious.

Tank tablets

Toilet tablets perfectly disinfect it and fight plaque

Special tablets for the tank not only effectively fight plaque and urinary stone, but also disinfect the toilet bowl well. In addition, they have a pleasant smell, which can also be considered a plus. Tablets for the tank disinfect the surface of plumbing and extend its life. Buy a pack of pills and put one capsule in the bottle. After it starts to dissolve, the water in the tank will turn into the color of the tablet. This means that she began to act. As soon as the coloring pigment disappears, put a new capsule into the tank.

In addition to regular preventive cleaning, it is also necessary to adjust the pressure of the water supply to the tank. This will significantly reduce your utility bills, as well as get rid of the constant appearance of lime deposits on the toilet. The most effective way is to place several filled plastic bottles. This will help cut costs and save 2.5-3 liters of water during each use.

When buying new plumbing, give preference to toilets that have a double flush button and a water-saving mode.

If you don't feel like messing around with a dirty toilet and cleaning it yourself, call a professional cleaning company. It will cope with pollution much faster thanks to special equipment and “professional” cleaning agents.

Periodic cleaning of the toilet will not take you much time and effort, but it will help protect the toilet from contamination. It is prevention that is optimal way fight against plaque, stone and yellowness. If your toilet needs a thorough cleaning, use our tips - and it will be successful.