wells

How to clean the toilet from limescale? Toilet care products. Cleaning the toilet from limescale: folk and factory remedies How to fill the toilet from urinary stone

The condition of the toilet directly depends on how carefully they are used. Any plumbing product requires special care. In order for you not to have to look for an answer to the question of how to remove a stone in the toilet bowl, you should follow all the requirements for the operation of the product. Neither limescale nor urinary stone appear in one day. Such defects are formed gradually due to improper operation of the toilet bowl. So how to wash the toilet with your own hands?

Formation of a urinary stone

Rare hygienic cleaning of the product leads to the formation of a urinary stone on the rim of the toilet bowl, as well as on the drain hole. In addition, the cause may be an irregular pressing of the toilet flush button. Usually families with small children have to face such a problem. The thing is that untimely flushing of urine leads to the deposition of mineral deposits on the walls of the drain hole. Subsequently, its density increases, a urinary stone is formed. It is absolutely impossible to clean such a formation with a brush. Your usual household detergents are also unlikely to help remove them.

limescale

The reason for the appearance of limescale is the degree of hardness of the water, as well as its chemical composition. Timely hygienic cleaning of plumbing will prevent such formations, and you will not have to deal with the issue of removing a stone in the toilet. In addition, do not forget about special products designed to soften water.

Another reason for the formation of urinary stone or limescale can be a damaged surface of a plumbing fixture. Typically, such defects occur due to improper use of the product. Few housewives know that hot liquid poured into the toilet bowl can cause microcracks to appear on it, in which plaque buildup begins.

How to clean the toilet

In the case of relatively unsettled plaque formed by urine or lime, less complex cleansing measures can be dispensed with. In order to wash the toilet and remove the urinary stone, you should remove the water. This can be done using a plunger or a regular cup with a handle. For further action you can use any toilet cleaner. Apply the composition to the walls of the product and leave it in this state for at least an hour. If necessary (if you chose a liquid detergent, it will drain), you can repeat its application several times. After that, a thin, unsettled coating of urine and lime can easily be cleaned with a brush.

Cardinal methods of washing plumbing

To work, you may need:

hard brush (non-metallic);
gloves;
vinegar;
baking soda;
white;
lemon acid.

If the limescale and urinary stone in the toilet have formed a thick layer of compacted, ordinary detergents will not help here. How to remove a stone in the toilet without damaging the surface of the product? Washing using coarse metal brushes, as you understand, is not recommended. There are more gentle methods for cleaning the toilet.

How to remove stone using vinegar. In order to remove a stone in the toilet bowl, 9% vinegar is often used (apple vinegar is also possible). A glass of vinegar should be heated to about 40ºС. In order not to breathe in a pungent odor, cover the container with a lid. Pour baking soda into heated vinegar, you can add a little iodine. Pour the prepared composition into the toilet. It is advisable to leave the vinegar overnight so that the stone is completely dissolved. If necessary, you can repeat the steps until you get the desired result.
Removal of urinary stone with the help of whiteness. First you need to remove all the water from the toilet. Next, pour out a bottle of the product and leave it overnight. If the result suits you, rinse the plumbing fixture with warm water. If plaque remains, repeat the procedure.
How to wash a plumbing fixture using citric acid? In addition to the above means for washing the toilet bowl, this method is also suitable. For one procedure, two sachets of the product will be enough. Pour citric acid into the toilet and close the lid. In three hours, the stone should partially dissolve. Most likely, it will not be possible to completely get rid of contaminants in one procedure. You should repeat the steps until the toilet is completely clean.

The heaviest pollution and means for their purification

Depending on the chosen method, you may need:

rubber gloves;
protective glasses;
respirator;
hard brush;
brush;
oxalic acid;
battery electrolyte.

The use of technical oxalic acid. How to wash the dirt in the toilet, formed over several years of operation? Cleaning with ordinary household detergents is absolutely useless here. In such cases, you can use technical oxalic acid. This product is sold in the form of a dry powder. Before using it, carefully read the instructions on the package. When working with oxalic acid, all safety precautions must be observed. All the following actions are carried out strictly with rubber gloves. Apply the powder to a wet piece of tissue, after which they should wipe the formation of urinary stone. You can also dissolve technical oxalic acid in the toilet itself and leave for an hour. But keep in mind that this option will require a much larger amount of powder. After the procedure, it is necessary to thoroughly rinse the toilet.
Using an electrolyte to remove the stone. The use of an electrolyte is considered the most effective method to remove an old urinary stone. But working with electrolyte requires the most serious safety measures. Procedures are carried out in goggles, gloves and a respirator. It is very important not to splash the electrolyte when pouring into the toilet. This method of cleaning the toilet bowl is used for extremely heavy pollution. Please note that if your plumbing pipes are made of plastic, electrolyte is contraindicated.

In addition to all methods, you can use Coca-Cola as a toilet cleaner. The method of removing urinary stone using Coca-Cola is quite effective. How to clean the toilet bowl using this product? To do this, pour two bottles of Coca-Cola into it. Leave it in this state for several hours, after which, using a brush and household detergents, remove plaque.

A plaque of urinary stone often appears on the inner surface of the toilet bowl. It is formed with insufficient or irregular cleaning of the toilet bowl. Such deposits spoil appearance plumbing and provoke the appearance of an unpleasant odor. You can clean the toilet from a urinary stone using chemical products or home methods. The choice of cleaning method depends on the degree of contamination and the duration of its accumulation.

Vinegar

9% vinegar will help remove urinary stone inside the toilet. Pour the liquid into a container and put on fire. Cover the pot with a lid to prevent the spread of an unpleasant odor throughout the room. Heat the vinegar to 40 ° C, make sure that it does not boil.

Pour the warm liquid into the toilet bowl and add a few teaspoons of iodine or baking soda to increase the reaction. Close the plumbing with a lid and leave it for at least 2 hours, then wash it with warm water. To remove old and stubborn dirt, carry out the procedure in the evening, leaving the solution overnight. If necessary, repeat the procedure several times until the urinary stone is completely removed.

Lemon acid

Citric acid will help to cope with urinary stone. To clean, pour a few sachets of product into the toilet, close the lid and leave for several hours (preferably overnight). After the allotted time, rinse off the water and use a brush to clean the places of the greatest accumulation of stone, then rinse with warm water. To get rid of all impurities, repeat the procedure several times.

Coca Cola

Coca-Cola is a popular remedy for removing urinary stone from the surface of the toilet bowl. Pour the drink into the toilet bowl and leave for 3-4 hours. Then wash the inside of the plumbing with warm water. Repeat draining several times to remove any remaining product and urinary stone.

Oxalic acid

Oxalic acid is effective remedy to remove old traces of urinary stone. It is sold in powder form in specialized stores. Use gloves when handling oxalic acid.

To clean the toilet bowl, pour the product on a damp sponge or cloth and wipe the places of maximum contamination. With a large amount of urinary stone deposits, pour the powder into the toilet and leave for an hour. Then wash away clean water and clean the surface with a brush.

Special funds

Cleaning the toilet inside will help and household chemicals.

White- the most famous and common tool that will help remove not only urinary stone, but also other contaminants from the surface of the toilet bowl. Before the procedure, remove all water from the toilet with a plunger and shut off the drain. Pour a bottle of Whiteness into the plumbing hole and let it sit overnight. Wash the toilet in the morning with warm water. This method is very effective, but has one significant drawback - bad smell bleach.

Specialized funds- Domestos, Silit, Mr. Muscle, Toilet duck, etc. Use powders and gels according to the instructions on the package after completely removing the water from the toilet. Pour or pour household cleaner into the toilet and leave for a while. Clean the exfoliated particles of stone with a wooden spatula or brush, and then wash the plumbing with warm water.

Household products are easy to use, but only effectively deal with small and fresh deposits of urinary stones. For maximum results, combine several products or combine them with home methods.

Removing old traces

Helps to cope with chronic urinary stone deposits electrolyte- a solution of sulfuric acid, which is used to operate batteries. Such a tool will effectively remove pollution of any complexity. When working with it, observe special safety rules: wear protective clothing, goggles, gloves and a mask or respirator to avoid inhaling fumes.

Carefully pour the electrolyte into the toilet, avoiding splashing. Wash off the chemical after 15 minutes large quantity water.

You can remove traces of urinary stone from the inside of the toilet bowl using classic household products, folk methods and especially aggressive drugs. When cleaning plumbing, be careful - use gloves, a mask, avoid getting chemicals on the skin or mucous membranes. To reduce the amount of effort required to clean the toilet, keep it clean regularly.

Cleaning the toilet is a must in every home. Another question is that not everyone knows how to clean and how to clean the toilet bowl so that it is white, does not contain lime and urinary stone.

Toilet cleaning is a must in every home.

For the procedure to be successful and effective, you need to know the causes of the appearance. Only after that you can act and open war on unpleasant moments, including smells.

Cause	What caused the appearance
limescale	All water appears in the house not just from special tanks. It is taken from reservoirs. Further, they are treated not only with bleach, but also with a variety of chemicals. Naturally, sedimentary rocks, soil, elements of substances settle on the pipes. Each time the plaque increases and enters the apartment in different quantities in the form of lime. Separate organic and inorganic. The latter are subject to decay more slowly.
urinary stone	The natural release from the recycled fluid of each person is urine. It consists of trace elements and minerals. All are excreted during urination. Combining with lime and microparticles in the water that has already arrived, they create a stable connection. It is it that remains on the walls, gives an unpleasant odor and a gray-yellow coating.

Ceramics are even very good quality has irregularities. Films already obtained in the course of joining fall on them. Getting adjusted one by one, pollution arises. Initially, they are not noticeable. But if not treated for 3-5 days, they become noticeable. This overlap occurs especially quickly in families of 4 or more family members.

Need to know! Before buying ceramic items used in the home, check how well the ceramic lays. The presence of roughness. Each flaw makes it possible for the toilet or bathroom to become unusable much faster than the manufacturers guarantee. Limescale deposits not only on the walls of the toilet, but also in the bathroom.

It should be noted that the most profitable purchase will be if the product is made of glazed faience or porcelain. But the cost will be much more than conventional plumbing.

Knowing how and with what to clean the toilet at home is simply necessary. Since plaque leads to malfunctions and failure of devices:

the appearance of cracks;
leak in a barrel and not only;
weakening systems;
clogged pipes;
the appearance of rust spots.

How to wash and what the developers offer the toilet chemical substances for home use. There are plenty of them on the shelves of hardware stores. How effective they are can only be judged after application. Do not forget that they are divided into groups. Which one or another means will fall into depends on the degree and origin of the plaque:

Pills

How to clean the toilet from the formed stone? Take the pills that are lowered immediately into the barrel. Such tricks will help in the elimination of a small plaque. Prevents the formation of new films. Also, with regular use, they can soften strong growths. Then just treat with additional substances to remove problem areas.

hydrochloric acid

The substance is very dangerous for human health, but it effectively fights the stone. There was a dilemma on the topic of how and with what to clean the toilet from the stone? Then try hydrochloric acid. But do not forget about safety measures for the skin of the hands and mucous membranes. Also take care of the airways. The substance is caustic and can corrode the nasopharynx while cleaning the toilet from urinary stone. Before starting work, check all connecting parts. If there is plastic or rubber, then the method is not suitable. The product will corrode and destroy them, resulting in repair work and replacement plumbing.

Hydrochloric acid is dangerous to humans, so when using it, follow safety measures.

Phosphoric acid

The item does the job perfectly. With its help, it is much easier to clean the toilet bowl from urinary stone. It also helps to remove rust and difficult dirt. For one event, 100 g of acid is enough. The time spent on work is a quarter of an hour. Rinsed with running water. Can be used for all types of faience. Does not dissolve plastic elements.

Alkaline-acid products

If you ask the sellers in the department with household substances: “How and how to clean the toilet bowls of urinary stone?”, Then they will name a number of products produced specifically for this. By demand, we created a list of people who can really help:

"Toilet Duck";
Sealit-Beng;
Domestos;
Comet.

The composition of such drugs includes caustic soda. It perfectly helps to remove the problem in the form of plaque and stone, but it does not damage the surface of plumbing and enamel at all. There are a number of conditions to use to remove a urinary stone in the toilet bowl. First, soaking should take place for at least 6-8 hours. Secondly, there should be no water at all. To do this, it is scooped out. Thirdly, the agent must completely cover the treatment area.

Choose an effective toilet bowl cleaner - there are many on the market

Cleaning with abrasive particles

The name is complicated, as is the delete method. Sold in the form of powders that fall asleep inside the neck. Efforts will have to be made for a forced event to clean plaque and stone. The process is laborious, since the water is completely removed first. Then, with the help of a sponge, rub the problem areas. The time of the procedure is not limited, as the degree of contamination is different.

Folk craftsmen also do not sit idly by. They carefully select methods that bring minimal harm to people. Options, how and with what, to clean toilet bowls from urinary stone and limescale at home, can be divided into simple and complex. But they all work great. Everything that is at hand in every home is used. For example, baking soda or vinegar is great.

Excellent splitter. It is a pleasure to use it on your own. Since it does not cause allergies. Therefore, the minimum amount for the process is 200 g. To increase efficiency, they fall asleep at night. Already in the morning washed with a brush. Plaque is removed with plates. Therefore, sometimes they use their hands in order to remove such debris and not clog the pipes. In order to avoid difficulties with such residues, it is recommended to use a liquid called electrolyte. But it is worth using this method rarely and in cases where all options have been tried. The composition of the substance included sulfuric acid. Therefore, damage cannot be avoided if you do not protect yourself.

Vinegar and citric acid give the same result and reaction. Not sure how to remove a stone in the toilet? Take advantage of these resources. When using acid, at least 100 g will be required. The granules are diluted in water (200 ml). Vinegar is always clean and undiluted. The selected substance heats up to 37-38 degrees. We use a container for heating so that the lid fits snugly and does not allow the necessary substances to evaporate. In closed form, we take it to the toilet and pour it out. It is better to pump out the liquid from the toilet. Close the seat cover and leave for at least 6 hours. In the morning wipe with a brush. Rinse well with water.

The main means in the fight against rust and urinary stone

Who hasn't heard about the power of Coca-Cola? Already the entire Internet is replete with opportunities to do things independently with this drink. Therefore, it is natural that both plaque and stone can be cleaned. The water is pumped out, and a fizzy drink is poured instead. The whole procedure takes time: 6-8 hours. The most successful night. One problem in the house, such as cleaning the toilet from a urinary stone at home, has become less.

How and what else can you clean a urinary stone in the toilet so that it turns white? Apply oxalic acid. It is only used dry. It is difficult to get it in this form, but it is quite real. This powdered agent will return the ceramic surface to its original appearance. The surface should be moist, but without liquid. Apply with a sponge. Leave on the surface. Periodically pour the substance and rub, but without much effort. How the problem area dissolves and becomes softer can be seen immediately. Using a toilet brush, help him completely get off the faience. Wipe again with powder and rinse several times with water.

What can help prevent

Tired of regularly looking for funds and thinking about how and with what to remove a urinary stone from the toilet bowl? Only prevention in this can be of great service. But how to make lime less? Or that all tenants regularly wash after themselves? If these are elderly people, then in order to save money, they will not listen to requests.

Therefore, prevention is that:

You can put filters on the pipes and use barrel tablets regularly.
Draining fat or coffee grounds, as well as other products, into plumbing is not recommended. They not only forget, but also leave a dirty film on which impurities will cling.
Once a week, be sure to pour soapy water overnight. Use only laundry soap.

Using such methods, you can not only prevent the formation of problem areas on plumbing, but also save money that is spent in search of a solution to one of the most difficult tasks: how to wash limescale and urinary stone in the toilet.

Every housewife dreams of her house shining with cleanliness. But the modern life of women does not always provide this opportunity. Work, children, family - now there is absolutely no time for cleaning. If the toilet is not cleaned for a long time, a urinary stone may form on its surface. A urinary stone is a build-up of minerals that, along with urine, get on the walls of the toilet. Usually, a urinary stone forms under the rim of the toilet, as well as in the place of stagnant water.

Why does a urinary stone form?

Most often, a urinary stone is formed on the toilets with untimely and insufficient draining. This is especially true in families with small children. Babies don't always remember to flush and the minerals from the urine eat into the walls of the toilet bowl.
If the drain barrel is defective, this also contributes to the formation of limescale and urinary stone.
Plumbing with a defect or a rough surface is perfect place for the accumulation of dirt, germs, plaque and stone.
Old toilets with a long service life are most prone to the formation of urinary stone.

The urinary stone tends to grow and increase in size. If you do not fight it, it significantly narrows the lumen of the toilet bowl and pipes. Therefore, if you are faced with such a problem, you do not need to delay its solution. With a urinary stone, you need to fight here and now!

First you need to drain the water from the toilet. This is easy to do with a mug with a handle - just scoop out the water. After all, any tool works much more effectively without water.
Then put on gloves and a respiratory mask. Most modern chemicals are quite aggressive.
Take any cleanser that says on the label that it can fight urinary stones. For example, Toilet Duck, made from hydrochloric acid, is very effective even in still water. In the line of household chemicals Domestos there is a special tool designed specifically for urinary stone. According to the manufacturer, this tool completely destroys even chronic one-year-old growths. Very effective in the fight against urinary stone and Cillit, its effectiveness is noted by many housewives. Another powerful household cleaner is Mr. Muscle in granules. It not only cleans the toilet from urinary stone, but also whitens the surface. Choice professional tool household chemicals is yours.
Apply the product of your choice to the rim of the toilet bowl and to the places where the urinary stone has grown. Leave for a couple of hours. You can't use the toilet during this time.
After the indicated time, rub the walls and rim of the toilet with a brush. It is better not to use metal brushes, they can scratch the plumbing, which leads to the re-formation of plaque.
Of course, it will not be possible to get rid of a dense and thick coating at a time. If necessary, the procedure can be repeated. Thus, over and over again, you will get rid of the thickness of the urinary stone until you remove it completely.
Please note that children and animals must not be in the bathroom during treatment. Chlorine-containing household chemicals are very toxic.

How to get rid of a urinary stone with improvised means

If there are no specialized gels at hand, you can use what you have at home. Here are a few effective ways getting rid of urinary stones.

Vinegar. This is a great recipe for removing a urinary stone. For this we need vinegar, baking soda and iodine. These ingredients can be found in every home. A glass of vinegar must be slightly warmed up. Take not very strong, 9% is usually enough. Be careful - do not inhale the vapors of the heated liquid. After that, add a spoon to the hot vinegar baking soda and a teaspoon of iodine. Mix the composition and pour it into the toilet. It is best to do this at night so that the prepared remedy has time to take effect. In the morning, go through the toilet with a brush and rinse everything thoroughly.
Bleach. This is a very aggressive and very effective remedy for fighting urinary stone. However, it does not work in water, it must first be scooped out. Pour a glass of any chlorine bleach and leave for a few hours.
Lemon acid. This is another effective way to get rid of plaque. You do not need to do anything, just pour 3-4 bags into the toilet citric acid. Leave for a while. This will not completely remove the stone, but small growths can be easily removed.
Bleach. Buy a bag of bleach and pour it down the toilet. It is best to leave the product overnight. Chlorine not only helps to destroy the stone, but also disinfects the surface, which is also important. In addition, after chlorine-containing products, the toilet bowl will again shine with whiteness, like new.
Anticalc. This is a universal remedy for removing any type of plaque - scale, urinary stone, calcareous formations. Pour a packet of this powder down the toilet at night. In the morning you will find that the urinary stone has begun to fall off by itself, in pieces. Residues of dirt will need to be cleaned with a brush or brush.
Oxalic acid. This tool is suitable for hard-to-remove and chronic growths. Oxalic acid can be bought at hardware stores, it is a powder white color. When using oxalic acid, it is very important to wear a respirator and gloves, as the agent is very toxic and corrosive. If the urinary stone is localized only at the drain site, the acid must be poured into the water. If the stone has formed on the rim of the toilet, you need to put a little powder on a cloth and gently wipe the contaminated areas. Leave the toilet for a while, then once again walk on it with a brush and press the drain button.
Carbonated drinks. This is a modern, but very effective means of getting rid of urinary stones. Take a couple of bottles of Coca-Cola, Sprite or Fanta and pour it down the toilet. Leave for three to four hours. A high concentration of citric acid breaks down the stone and cleans the toilet bowl.
Electrolyte. This is the most thermonuclear remedy for urinary stone. The electrolyte is used in car batteries, but perfectly destroys various kinds of growths. However, before applying, you should make sure that all pipes of your sewer system are metal. Plastic pipes may be damaged. So, pour some electrolyte down the toilet and let it sit for a couple of hours. After that, proceed similarly to the previous methods - clean and rinse.

It is worth noting that urinary stone appears on running plumbing when the toilet is not cleaned for a long time. Therefore, in order to avoid such growths, you need to regularly, at least once a week, clean the toilet bowl with prophylactic agents. Any household chemicals will cope with a small amount of pollution. To do this, just pour a little chlorine-containing product on the rim of the toilet, and then rinse everything with water.

Also pay attention to the serviceability of the drain tank. If the water flows constantly, it contributes to the formation of calcareous and urinary stones. This is especially true in regions with hard water. To soften the water, you can put a small filter in the tank that will protect the toilet from various kinds of growths.

An excellent prevention of the formation of urinary stone are special plates and tablets that are attached to the inner wall of the toilet bowl. With each drain, the surface is cleaned and disinfected, which is important for general hygiene.

As noted, urinary stone is formed on rough surfaces, in places of chips and cracks. To avoid this, you need to protect the surface of the toilet and do not clean it with abrasive products. Do not pour the remains of hot food into the toilet bowl - it can cause the formation of microcracks.

An old, damaged toilet is a potential site for a urinary stone to build up. Having eliminated it once, be prepared for its reappearance. To avoid constant struggle, you need to buy and install a new toilet with a glossy surface. Monitor its condition, clean its surface regularly, and urinary stone will not bother you anymore!

Video: how to wipe the toilet in 15 minutes from a one-year-old urinary stone

At home, you can clean the toilet from limescale, rust or urinary stone different methods. Gentle cleaners will be effective even with heavy soiling, but cleaning will take a long time, and in case of persistent deposits, the treatment will have to be repeated 2-3 more times. If you want to see the result in a short time, you will have to use "heavy artillery" - technical acids produced by the chemical industry for various purposes. They perfectly cope with the most difficult problems and allow you to clean the toilet bowl white. However, chemicals are potentially dangerous and require strict safety precautions.

Show all

Folk methods

To wash the toilet from yellow plaque and rust, you can apply folk remedies well proven in practice. Their advantage is safety and relative environmental friendliness. Any of the tools at hand can be found in every kitchen.

If you need to completely empty the toilet bowl, you can use a disposable cup or an empty plastic tube.

How to wash potassium permanganate from a bath, hands and clothes

table vinegar

To bleach plumbing with 9% vinegar, you will need 1-2 bottles, depending on the amount of liquid that fits in the bowl of a particular toilet model. It should be borne in mind that for a good effect, the cleaning procedure should take at least 6-8 hours, and it is even better to pour the product overnight:

remove all water from the toilet;
pour vinegar into the bowl;
moisten paper napkins or rags abundantly in vinegar and plug under the rim of the toilet;
cover the entire inner surface of the toilet bowl with the same napkins;
close the toilet lid and wait the required time;
after 6-12 hours, remove all wipes;
without draining the vinegar, clean the plumbing fixture with a brush or a stiff non-metal brush, trying to remove the deepest deposits;
flush the toilet with clean water.

If the result is not entirely satisfactory, you can repeat the cleaning with vinegar or choose another remedy.

You can only clean the toilet with non-metal brushes and brushes

Lemon acid

For the proper effect, you will need at least 3 sachets of citric acid: 2 sachets should be poured into water, and 1 sachet into the tank. After that, it is necessary to close the toilet lid and leave to act for 3-4 hours. When the specified time has elapsed, clean the faience surface with a stiff brush with nylon bristles and rinse several times. After such cleaning, some of the contaminants from the tank and from the surface of the bowl will definitely leave. If one treatment is not enough, the procedure will have to be repeated: the more serious the pollution, the more citric acid will be required.

If a running toilet was inherited along with the apartment, it is better to replace it with a new one, since average term The service life of the device is 25-30 years. With time protective layer enamel wears off, and mineral salts eat into the porous structure of faience, and plumbing will have to be cleaned almost every day.

White

To remove the urinary stone and the deposition of mineral salts, the familiar Whiteness is suitable for everyone:

remove all water from the throat of the toilet;
pour 1-1.5 liters of Whiteness, pouring abundantly on the surface of the bowl;
leave to act for 0.5-1 hour;
clean all internal parts with a brush, making efforts in places of strong pollution;
Rinse off the cleaning agent and loose dirt with water.

Whiteness should not be poured into the tank, otherwise toxic fumes that enter the respiratory tract can be harmful to health. Instead of Whiteness, Domestos or Santri can be used in a similar way - they contain small amounts of technical acids that effectively cope with this kind of pollution.

Coca Cola

Experimental lovers can experience the cleansing power of carbonated drinks. If you pour 1-1.5 liters of Coca-Cola, Sprite or other similar product into an empty toilet bowl and leave for several hours, deposits of mineral salts will easily move away from the faience surface. The main thing is that orthophosphoric acid is present in the composition of the drink.

Coca-Cola cleaning method

Baking soda

You can get rid of plaque and rusty streaks with baking soda. It needs to be abundantly sprinkled over the entire inner surface of the plumbing and left overnight, and in the morning cleaned with a hard brush or brush, carefully treating each area. During the impact of this food product poisonous fumes and unpleasant odors are not emitted, so it can be considered the safest. However, with persistent deposits inside the toilet, soda will not help.

Harsh chemicals

Modern household chemicals with regular use do an excellent job of cleaning faience appliances. Experts advise giving preference to a liquid or gel-like form of a cleaning agent: abrasive powders leave microscopic scratches on the surface of faience, and those, in turn, accelerate the growth of plaque and deposits.

The most popular and effective in this segment are:

Breff;
Sanitary;
WC 5+;
Domestos;
Santry;
Sarma;
Sanitol;
Silit;
Toilet duck.

The listed products will help get rid of fresh deposits. But if there is no visible effect from their use, you will have to turn to strong reagents for help:

Orthophosphoric acid. Effectively removes stubborn plaque and urinary stone. For quick effect you need to pour 100 g of the product into the toilet bowl, rinse with water after 15 minutes and clean the inner surface with a brush. The advantage of this acid is that it does not attack ceramics, plastics and rubber.
Hydrochloric acid solution. The vapors of this substance are dangerous, so you need to be extremely careful when working with hydrochloric acid. To achieve the desired result, it is recommended to pour 1 cup of the solution into the toilet bowl and leave for 15 minutes, only be sure to close the toilet lid and leave the toilet for this time. This method is not suitable for apartment owners where sewer pipes made of plastic, and can only be used in houses with communications made of cast iron.
battery electrolyte. A very strong agent, the method of application of which is similar to the treatment with hydrochloric acid. The electrolyte will help clean the most neglected toilet, but after that, the plumbing must be regularly looked after and prevent the formation of persistent plaque - an aggressive agent is not suitable for frequent use. The battery electrolyte contains sulfuric acid, so when working with it, you need to be extremely careful and pour the liquid strictly into the toilet. If the drain of the appliance is connected plastic pipes electrolyte cannot be used. The disadvantage of this method is a pungent smell, so it is better to postpone cleaning the device at night, when none of the family members will visit the toilet.

In the process of cleaning the toilet bowl with any of these chemicals, safety measures must be observed: wear protective gloves, goggles and a respirator. However, glasses will not be superfluous when working with gentle preparations, but rubber gloves are an essential attribute of the cleaning process of any plumbing fixture.