Faucets

How to make blinds from wallpaper at home. Do-it-yourself wallpaper blinds: step-by-step instructions, master class, photo

It takes ~3 minutes to read

Save

In winter, you want light, and the curtains on the window are moved apart as much as possible. And in the summer you need to hide from the scorching sun and protect the interior of the apartment from its rays. That's what blinds are for. They were invented in hot countries - in India, in Spain. They do not let in the scorching light of the sun and close the room from prying eyes. In this article, we will talk about how to make them from wallpaper with your own hands.

Blinds in our climate are widespread in offices, shops, and in our own apartments. They are easy to buy, but there is an opportunity to save your money and make them yourself from wallpaper. Everything you need for this is in every home. After all, after the repair, there are always unclaimed rolls. These curtains are needed for apartment windows, balconies, cottages. If the remnants of the material are not enough for all the windows, then they can be purchased in stores for repair.

Advice! Ask the seller for discounted rolls left after the sale. The quality is excellent and the price is much less.

Save

It is easy for anyone to make them on their own. Everything you need for this is in any home.

First of all, you need to decide what wallpaper to make the product from. They should be strong, but not too thick. It is necessary to pay attention to their pattern so that it harmonizes in color with the curtains, furniture of the room. An interesting option when they are made from the same wallpaper that the room is pasted over.

First way

For work you need:

a roll of paper wallpaper with a length of at least 1500 mm;
scissors;
meter ruler and pencil;
cord 1.5-2 mm thick;
awl;
double sided tape;
retainer;
decorative tape.

Save

We measure the window. Blinds can consist of one wide strip or two narrow ones. The width of the strip should be equal to the width of the window, the length - the height of the window plus 25%.

It is more convenient to work on a large area. Cut off a strip of wallpaper right size, we lay it out on the table, we place weights at the ends so that the roll does not curl up.

The strip needs to be folded with an accordion of 3-15 cm. To make the accordion neat, you need to draw the wallpaper along the ruler. First, put dots on the selected width on both sides of the piece. Then connect them with a ruler. In childhood, many made toys by folding paper with an accordion, so everyone understands the process.

We make the first folds using the edge of the ruler. We apply a ruler to the line, bend it. Side part of scissors or with a dull knife draw along the fold line so that it is clear and fixed.

Save

When the whole accordion is ready, retreating 15 cm from both ends, we make holes with an awl through which a cord will be pulled to lower and raise the curtains. If you plan a wide strip for the entire window, then make more holes in the middle so that the blinds do not sag. If the curtain is narrow, then we make holes in the middle of the strip, but it is not necessary on the sides.

The next step is to pull the cord into the holes with a large needle or hook. Its tips need to be melted, the bottom edge is fixed in a retainer, you can buy it or cut it off from an old jacket. It is needed so that the curtains remain at the desired length.

This is where you can finish the production by decorating them with a satin ribbon, tying a bow out of it. The bottom of the curtain will be straight, horizontal.

You can finish the blinds with a peacock tail. If a rope is pulled in the middle, then the opposite ends are connected together and glued together, a beautiful fan is obtained.

Save

There are windows of complex shape - at the top there is a window in the form of an arch. Then they can be made in the form of a fan, as at the end of the curtain, and close the window completely. If the arch consists of two half-arches separated by a wooden partition, then we make two half-fans and close each half-arch.

If there is no need to close the entire window, but you need to shade part of the room, then we make a fan of the desired size and close part of the window. We fix the blinds from the wallpaper on the window with double-sided tape, it can withstand up to 3 kg. You can make another homemade mount - then glue a strip of thick cardboard to the last accordion, use nails or other fastening material.

Second way

Save

There is another, more complex way to make wallpaper curtains. They protect better from the sun because they are double:

The wallpaper must be cut into strips with a 100 mm tire.
The strips are twisted and glued into tubes, their number should be sufficient to cover the entire window.
After drying, the tubes are compressed into a flat lamella with clear ribs, and the gluing place is placed at the top in the middle.
The tubes are smeared in the middle with glue and glued on top of each other in a high pile. Dry adhesive is used to avoid smearing and leaking of the adhesive.
After complete drying, holes are made at a distance of 15 cm. Ropes are passed through them, the lower ends of which are clamped with a latch. Thanks to these cords, the blinds can be lowered and raised.
They are attached to two plastic rings and hung on nails driven into the window frame. Or just stick with double sided tape.

Roller blinds: do-it-yourself step-by-step instructions

roller blinds or roller blinds. How to make them yourself? This method is the easiest. No need to fold the wallpaper into an accordion, no need to pierce holes and pull the cord through them.

You need to measure a piece of wallpaper twice the length of the window plus another quarter:

The cut piece is folded in half for strength, glued at the ends with glue or double-sided tape.
At the edges, pockets are bent and stitched with a stapler. Weighting agents are threaded into them - wooden planks.
Tape twice the length of the curtains is attached to the top pocket. Flips to both sides.
Blinds are glued to the window with tape. They are made in the same way, you can only take a different number of tapes holding the roll. You can take one wide ribbon, strengthen it in the middle, unfold the curtain to the desired length and tie a beautiful bow. Or tie two ribbons on the sides of the roll with a bow at the same height from the windowsill. Roller blinds are ready.

Workshop on making blinds from newspapers

The manufacturing process of this type is the most complex and most time-consuming.

Save

You will need:

newspapers;
beautiful cord;
two plastic rings;
rope;
Crochet hook;
paints, brushes for coloring newspaper tubes.

For blinds on a standard window, you need to wind up to 200 newspaper tubes 400 mm long. Long tubes can be cut in the process.

Master class: the newspaper is wound on a thin metal rod, usually a knitting needle is used. Having wound a piece of newspaper on it, the edge is glued. All tubes should dry well. Then they are painted acrylic paint. It is recommended to add PVA glue 3 to 1.

After painting and drying, the most crucial moment comes. A large number of small round tubes need to be connected into a durable canvas.

The first connection method: fasten the tubes, twisting with a rope, making one or two knots. Each knot is desirable to be lubricated with glue for greater strength. You need to start from the top side of the curtain. The rope should be almost twice as long as the curtain. The upper end is tied to a plastic ring. Now you need to twist both ends of the cord from the inside and outside.

Save

The second option is used by those who know how to crochet at least a simple chain. This method is more reliable, the tubes are tightly held by a cord chain, do not untie and do not stretch.

At the bottom, the cord is tied into a knot; for strength, we coat it with glue. Laying out the canvas flat surface and align the tubes, cutting too long.

AT window frame drive in cloves or special hooks. It is easy to hang a canvas on them for plastic rings. In any case, the curtains are easy to remove on a cloudy or rainy day.

In order not to remove the blinds completely, you can take a satin beautiful ribbon, strengthen from above and lower on two sides of the curtain. At the bottom, at the desired height, tie the ribbons into a knot and knit a beautiful bow. These homemade curtains are a variant of roller blinds.

Blinds repair

Old faded plastic, paper or wooden blinds can be restored with wallpaper. You need to choose wallpapers that best suit the interior of the apartment, enliven and decorate it.

You will need:

wallpaper;
old blinds;
PVA glue;
scissors;
ruler;
pencil.

On old curtains, we measure the width, length and number of slats. On a roll of wallpaper, draw the same stripes. We mark the places of the holes in the old blinds, so that later we can make cuts. We cut out the strips and stick them on the old lamellas. At the holes, cut into three parts. We try to glue one by one, without disturbing the pattern of the wallpaper.

We try on the windows, admire the updated curtains.

How to make blinds-blinds from wallpaper with your own hands, other options

If there are small pieces of white wallpaper left, then we advise you to make curtains with your own hands using the vytynanka technique. This technique originated in Ukraine, and is now used everywhere. Patterns are cut out of paper. It turns out paper lace, which looks good on the window day and night.

To make such a paper curtain, you will need knives, scissors, a wooden rug, pattern patterns. On the Internet, you can always find tips on this option for making blinds with your own hands from wallpaper step by step and photo patterns for cutting. With skill, diligence, patience and accuracy, real works of art are obtained.

Save

Another option is Roman blinds. They are usually made of fabric, but wallpaper can also be used. They need more material and more time to make.

Blinds are a practical item in home decoration. They protect people and the environment from the harmful rays of the sun. In addition, these are not only useful, but also beautiful things in the interior.

Pleated blinds look gentle and airy, in addition, they perfectly close the room from the rays of the scorching sun. Vertical blinds made of strips of fabric will help create a fashionable and unusual interior. Craft original curtain can be done in just a couple of hours step by step photo instructions help to make blinds with your own hands from wallpaper, fabric and even thread.

If a roll of wallpaper remains in the house after the repair, try making paper blinds from this wallpaper with your own hands. Such blinds are functional, beautiful, affordable, but require delicate care.

Paper blinds

Paper blinds are easy to manufacture and do not require large financial costs. For homemade version curtains you will need:

wallpaper;
one or two cords (slightly longer than the height of the window);
awl;
ruler 50 cm;
pencil;
scissors.

The width of the wallpaper can be 55 cm or 1 m - depending on the dimensions of the window. For a wide window, you can make a couple of products of 55 cm each.

The most budgetary way to close the window from sunlight - pleated blinds

First, measure the height of the window and add 30 cm to this value. Measure the desired length on the wallpaper and cut it off.
From the inside, draw the wallpaper into identical transverse stripes (2-3 cm wide). Make bends along the lines to make an "accordion".
Now, with an awl, make two holes along the left and right edges of the workpiece, or one in the center. Thread a cord through the holes to adjust the height of the blinds. The lower end of the cord can be decorated with a brush or a large bead, tie a knot at the end of the upper cord.
Attach the top of the paper sheet to the window using double-sided tape.
To get rounded blinds, glue Velcro at the bottom of the product along the edges (on the right and left sides), and then connect both halves. Homemade blinds from wallpaper are ready.

Advice. Perfect for these blinds. paper wallpaper medium density. With vinyl wallpaper, you will have to make more effort, as they are more difficult to bend.

You can even adjust the height with the help of clothespins

For paper blinds, a sheet of thick paper a quarter longer than the window opening is suitable

Detailed video lesson from the handmade master

We sew blinds from fabric

Fabric blinds require more effort and time to manufacture than paper blinds. But they will be more durable and practical. To ensure that the curtain does not shrink after the first wash, the fabric should be washed before cutting.

Pay attention! There are several ways of fastening blinds. The first option - the product is mounted in the window opening directly at the window itself. This option is convenient in the presence of a large window sill. If you sew a curtain on each window sash, it will be possible to ventilate the room even in the lowered position of the blinds. The second method of fastening is outside the window opening, in this case the curtain is sewn 5-10 cm wider than the opening on each side.

Installation options for horizontal blinds

You can fix the fabric version with Velcro on wooden beam or loops on the finished cornice. A weighting bar is needed so that the product keeps its shape well, and the fabric is evenly distributed over the entire width of the window.

Fabric blinds can be used alone or with curtains. They can be washed, they fit well enough to the window

You can install fabric blinds on any windows - plastic or wooden. Choose a dense or translucent material, depending on how much shading you want to get. A special curtain fabric or linen is ideal - they are durable and unpretentious in operation.

Fabric horizontal blinds

For the manufacture of such curtains, you will need curtain fabric or ribbons - satin or synthetic. Perfect option – dense fabric, which holds its shape well, does not fade, does not turn yellow in the sun, with antibacterial and dirt-repellent impregnation.

Original solution, but not easy to implement

Important! Each lamella should be no wider than 10 cm, otherwise the finished product will look too rough. The width of each plank should be the same. When calculating how much fabric you need, keep in mind that each lamella will need double the width and a 2cm seam allowance.

Step by step procedure

We cut out the slats.
Fold each right side inward and sew on three sides.
We twist, we iron.
We process the unstitched edge (top) with braid and fasten it on both sides, retreating a couple of centimeters to the loops.
We lay the finished strips of fabric tightly one to the other on a long braid.
Each strip on top must be basted to the braid and stitched.
We fix the finished product on the eaves.
We tie the threads to the lower loops of each row and thread them into the rest.
We bring both threads in one direction and pass through the ring previously driven into the eaves.
Binds the threads and fastens to the side of the window opening.

Advice! To make the blinds look neater, attach weights to the bottom bar.

Preparatory stage

determine the length of the finished product;
calculate the required number and width of lamellas;
we buy a guide made of plastic or aluminum with rotating and moving sliders;
prepare thin wooden panels;
we buy a strong cord, rings and threaded hooks.

Important! When calculating the width of the slats, consider the size of the window opening - the smaller it is, the narrower the strips of fabric should be.

Blinds manufacturing

We cut out the lamellas, not forgetting that the pattern should be twice as wide as the lamellas plus allowances).
Fold the fabric with the right side inward and sew on three sides.
We turn the lamella on the front side, iron it.
We process the fourth side.
Use glue to attach the fillets on top and bottom of each strip.
We fasten a small threaded hook in the center of the upper edge of the panel.
In the middle of each upper panel we make a hole for the cord of the rotary mechanism.
We hang the lamellas on the guides.
We fasten the threaded hooks on both sides at the level of the holes for the cord.
We stretch the cord through all the holes and hooks.
We fix the cord in the holes with thin chains or matches, after lubricating them with glue.
We tie the ends of the cord in the form of a loop hanging down by about 20-30 cm.
From below we fasten the lamellas together with a cord.
To make the blinds moveable, we mount a thin rod on the hinges.

Sewing curtains based on old blinds

Materials: Used horizontal blinds, fabric of the right size, liquid nails, sewing machine, scissors.

From the old blinds, remove all connection elements, lower limiters and crossbeams. The central threads must be left

Cut out a rectangle for curtains along the base, not forgetting about the seam allowances. On the wrong side, mark up, glue the crossbars on a new fabric.
Double-fold the edges of the fabric, iron them and sew them on the sewing machine.
Pass the warp threads through the holes in the crossbars.
Attach the fabric to the base, for example with liquid nails.
Pass the thread through the holes and secure with a knot. Hide the hanging ends of the threads from the wrong side.

Glue a piece of fabric to the top bar.

Blind exclusive for an original interior

Rope lamellas are hung on the cornice vertical blinds. They are not connected by the lower chain.

Non-standard solution - blinds from newspaper tubes. Newspaper sheets are twisted into thin tubes with a knitting needle and a screwdriver, painted in desired color, coated with acrylic varnish and dried. At the final stage, the tubes are connected into one canvas with twine and suspended from the eaves.

The curtain of newspaper tubes resembles bamboo blinds

You can keep the roller blinds open with a buttoned belt.

Homemade roman blinds

The principle of operation of Roman blinds and sails is very similar: a piece of fabric is raised and lowered with the help of a rope and a special device. However, a Roman blind can be sewn without a special cornice and fixtures. It can be safely used for a room of any style and direction, the main thing is to choose the right fabric.

Pair the roman blind with tulle or draped curtains. With the help of a cord, the fabric is gathered into horizontal folds, it can be fixed at any level.

Roman blinds can be combined with curtains of the same color

Roman without a special cornice

For the manufacture of "Rimki" you will need:

dense fabric;
wooden block for the cornice (2.5 cm thick, 5 cm wide and equal to the width of the curtain);
Velcro;
finishing tape;
slats;
small nails;
plastic rings of small diameter (1-2 cm);
weighting agent with a diameter of 5 mm or a wooden block;
three cords (the length of each is calculated as 2 curtain lengths plus 1 curtain width);
fasteners for the cord (hooks).

Advice. Instead of plastic rings, metal nuts of the same diameter can be used. A wire with a diameter of 3-5 mm is suitable as a weighting agent.

Work order:

Measure the window. The width of the product should be 6 cm more than the width of the window (allowances of 3 cm on each side). The length of the canvas is equal to the height of the window plus 12 cm of allowance (2 cm seam along the top edge and double hem of the fabric 5 cm wide along the bottom edge).
Attach the wooden plank-cornice with screws to the window opening. Using a stapler or small nails, attach one piece of Velcro to the plank. The second part of the Velcro tape must be sewn to the top of the panel.

To fix the rod of the eaves, you will need screws with rounded tips

Divide the height of the window by the desired number of folds to get the distance between the folds.

Table for determining the number of folds

Lay the fabric on a table or on the floor, wrong side up. In chalk, mark the fold lines for the folds, the fold lines of the fabric for the weighting agent, and the places where the rings will be sewn.

Advice. If the window is wide, and it will not work to sew a curtain from one panel, sew two pieces of fabric.

Apply a finishing canvas along the fold lines, and then stitch it so that the slats can be laid inside.
Thread the cord through the rings from the bottom up, bring it out through the rings on the upper eaves and through the side hook.
Pull the cords together for a beautiful drape.

The finishing border is sewn from the wrong side at the place of future folds.

Each ring is fixed with several stitches and secured with a knot.

Next to the place where the weighting agent will be inserted, you also need to sew a series of rings.

Advice. In order not to waste time sewing on rings, you can buy a ready-made tape with rings.

Roman blind with mechanism

With the help of a chain-tape mechanism, the canvas is assembled into horizontal folds. If you purchase such a device, you can sew a curtain yourself. This option may be suitable if it is difficult to choose the right color and texture from the entire range of blinds.

For the manufacture of Roman blinds, you need a special mechanism that can be ordered according to individual window sizes.

Cornice and control mechanism

Rimka from improvised materials

Production of roller blinds

Roller blinds are very similar to Roman blinds. But they are collected by winding on a rod or using a rope mechanism.

The mechanism for lowering and raising roller blinds

You will need: two canvases of the same size, garter ribbons (the length of each is two lengths of curtains plus 25 cm), 2 nylon cords (the length of the first is three lengths of the canvas, the length of the second is three curtain lengths plus its width), as well as two slats, screws, wooden cornice, furniture stapler.

Sew two canvases to make a bag. Then turn it inside out and iron the seams.
The weighting agent is placed in an open cut and built up.
The upper part of the canvas is processed and nailed to a wooden cornice with a stapler.
Garter ribbons that will hold the curtain in a folded position are attached to the eaves with a stapler.

The fabric completely covers the cornice

How to finish the edges of curtains

You can use adhesive tape to process the edge of a product made of thin fabric. Hem to the desired length, smooth the fold with an iron, place adhesive tape between the layers of fabric, iron with an iron. For heavy fabrics, use adhesive tape folded 2-3 times. This method is fast, but not as reliable as the edging method.

Finishing the edge with adhesive tape

edging way

Use finished tape with finished edges. Instead of braid, you can cut a strip of fabric, bend it in half, and fold the edges inward and smooth down. The edge of the curtain is placed between the two parts of the edging tape, tucked in and stitched.

Roman blind with wide edging

Hemming method

The edges of the panels can simply be hemmed with a sewing machine. The seam on the front side will not be visible if the edges of the product are hemmed with a blind seam.

With absence sewing machine edges can be processed manually

Choose wallpaper for blinds, taking into account the color scheme of the room. If making blinds with your own hands from fabric is an impossible task, and the paper version does not suit you, order curtains from trusted manufacturers.

We will send the material to you by e-mail

Who wants to acquire aesthetic and practical blinds? Especially for you, HomeMyHome invites you to get down to business and learn how to make blinds from wallpaper with your own hands.

Hiding from the sun is easy, spending a little time making blinds

You can study catalogs with real blinds for a long time, but still not find the desired pattern. At the same time, it is quite simple to choose the rooms suitable for the interior. The large selection offered by the wallpaper industry opens wide opportunities for those who are ready to use their hands for the good of the cause.

The benefits of such impromptu awnings are obvious: they do not allow the scorching sun to spoil the home decor and do not let the heat into the room.

Beautiful decor is provided by the creator himself, choosing the wallpaper to your liking. It is not necessary to buy new wallpaper. Often a couple of rolls from the previous pasting are kept at home, so why not put them into action? At the very least, they can be fearlessly trained in creating impeccable products.

Since the product is inexpensive, later it can be changed to a similar one, but in a different color and with a fresh print. If repairs are planned, then the impromptu curtains that have worked out will serve as window protection from building dust and dirt.

The mechanism, in any case, will weak point homemade. It is on him that you should direct maximum effort and attention.

Wide design possibilities in the manufacture of blinds from wallpaper for windows with your own hands

Let's see how homemade blinds look and decide if it's worth spending your energy and wallpaper. In the photo you can see what kind of do-it-yourself wallpaper blinds are.

The quality of the material plays a big role, for example, do-it-yourself non-woven wallpaper blinds will look richer and denser. The service life of this product will increase. Dark colors become more faded in the sun over time, and yellowish spots may appear on light material. Therefore, the higher the quality of the paper, the longer your curtains will last. Now let's figure out how to make blinds from wallpaper.

Related article:

A photo interesting ideas, classification, average prices, material for making canvases, how to properly mount on plastic windows and helpful tips- in our publication.

Popular and beautiful: do-it-yourself blinds from accordion-shaped wallpaper

An accordion is the most familiar look of blinds, it is they who most often try to reproduce at home. If everything is done according to the instructions, it will turn out beautifully, stylishly and of good quality.

What you need to prepare for work

Haste is inappropriate, it will take some time to work.

The first thing to prepare is the wallpaper. If you have any problems, you can always check step by step technology making blinds from wallpaper on video.

Having chosen the necessary canvas for the blinds, we begin to prepare the rest of the accessories. In addition to wallpaper, you must take:

a small skein of rope or twine;
two types of adhesive tape: one-sided and two-sided;
glue;
awl;
scissors.

You need to choose a fixture for fixing.

We measure the window

Measurements are needed accurate, the aesthetics of the design will depend on this. It is not necessary to look for a tape measure, it is quite possible to get by with a tailor's centimeter. After measuring the window opening, they decide what the desired length of the pleated should be.

We work with our own hands and make blinds from wallpaper: we help step by step, with a photo of the process

Illustration	Action Description
	The entrance is simple mathematics: the height of the window is divided by 4, and the height is again added to the resulting number. A quarter of the material goes to the future harmonica.
	The same length is assigned to the cord, which will regulate the opening and closing of the blinds.
	The workpiece is carefully cut out and folded into an accordion. The width is selected within 3-5 cm, this will give the product an even and neat look. The most difficult thing is to fold the harmonica evenly, no rush is needed.
	Be careful, no deviations can be allowed, each element must be a rectangle of the same width. Advice! Use a long meter ruler and a soft simple pencil, then the flaws will be minimal.
	As soon as the accordion is ready, determine its center with a ruler and make a good hole with an awl. If there is a large workable hole puncher, he will cope with such a task quickly and accurately. We take the cord and thread it through the holes, making tight knots at the ends. Here, too, we are not in a hurry to tie knot- first we tie a weak knot and straighten the product to the desired length (per window) and determine the position of the second knot.
	To fix the position, take the latch.
	A simple version of blinds when fixing is done with clothespins.

Video: how to make blinds from wallpaper

The deed is done, now how to install the blinds

There is not much left: the needlework needs to be fixed on the upper frame with double-sided tape.

We measure the width of the upper opening on the adhesive tape and cut off the strip.
Glue the strip on the frame on top of the window.
Remove the outer layer of the protective film.
Slowly glue the top edge of the product onto the adhesive strip.

Each window cleaning will begin with the removal of a handmade curtain. Double-sided tape cannot be torn off the paper, and when the blinds are torn off the frame, they may suffer. We offer this solution: First, as soon as the accordion is ready, we paste a strip of ordinary one-sided tape on its upper edge, and already on this smooth side Attach double sided tape.

Option two: let's see a do-it-yourself master class on making roller blinds from wallpaper

Whoever doesn’t really want to have an accordion on the windows can follow the step-by-step instructions and make roller blinds. Appearance Such products are perfect for many interior styles.

Related article:

What we prepare for work

Let's make sure that the following materials and tools are at hand to create a simple miracle:

drill;
wallpaper;
blinds accessories.

Step-by-step instructions: we make beautiful roller blinds from wallpaper with our own hands

Let's write down the measurements on paper so that the numbers do not fly out of our heads. Now we measure the length of the paper curtain, while adding another 15-20 cm to the winding.

Illustration	Action Description
	We take a pipe from a set of components. It has a special small horizontal dent for the entire length, this is a place for gluing the edge of the material.
	We turn the roll and work with the bottom of the product.
	We bend 5 mm from the bottom, we do it exactly across the entire width.
	We insert the bend into the groove of the weighting agent, make sure that everything is in the right place. This will not allow the weighting compound to break off the bent edge.
	We install plugs at the ends of the plumb line.
	Insert the cord into the spool. Pay attention to which side this coil is located: on the left or on the right.
	The cord will help us insert the scissors.
	We insert coils from both ends of the pipe, closing it on each side.
	The final touch: we insert brackets into the coils. You can start installation.

Mounting cornice with roller blinds in the window opening

On the window, you need to make markings and drill two holes on each side of the window with a drill. The brackets must be placed so that the holes match. After that, fix the cornice with self-tapping screws or screws.

Now let's check how our curtain works. We love and hide from the sun!

Article

Prepare the material and take measurements correctly. Let us consider in more detail all the subtleties of this work.

Before you make blinds on windows, you should familiarize yourself with their pros and cons.

Among the many advantages, we highlight the main ones:

the availability of the material;
the cost of finished products is significantly lower than analogues;
manufacturing is not difficult, no special skills are required, only time and accuracy in work are needed;
a huge variety of decor and shades, window decoration can be made with great imagination;
if you choose washable wallpaper for blinds, you can periodically carry out wet during operation;
blinds weigh little, their attachment to the sash is permissible, thanks to which space is saved.

We also note the disadvantages of products:

the main disadvantage is fragility: they will last no more than a year and during this period they will significantly lose their original attractiveness. But at any time you can make new ones from the wallpaper with your own hands, spending only 1-2 hours of time.

Advice! To prolong the life of blinds, it is better to choose a material for painting - such wallpapers are denser and more durable. Pre-strips can be decorated at your discretion.

Interesting ideas for designing and making do-it-yourself blinds from wallpaper on windows

The main advantage of homemade window blinds made of wallpaper is their cost, because you don’t have to buy new rolls for this, but you can successfully use the leftovers after. In addition, they do not require special care: when the material becomes dirty, it is simply disposed of and new ones are made. This is a great reason to often bring something new into - it’s not a pity to throw them away, because waste strips were used to make them.

For blinds, you can choose the same canvases that, or choose a contrasting pattern that is in harmony with. It is convenient to use such a decoration idea not only for windows, but also for balcony frames or on. This is a great way to quickly and inexpensively protect the room from bright light and prying eyes.

Original blinds from wallpaper can be presented in four versions:

horizontal;
vertical;
pleated - they are used for non-standard designs, for example, in the form of an arch or a triangle.

What accessories are required for work

Before starting exciting work, it is important to choose the right material and tools. All work will take no more than 1-2 hours, depending on the complexity and the chosen model.

Wallpaper selection features

For the manufacture of the first blinds, it is better to take the material that remained after. If the process and final result you like it, you can choose the design of the canvases in the store. Shopping centers often hold promotions and sales of exhibition samples and leftovers at a completely bargain price.

This should be known! From one roll 10 m long, 5 blanks will come out.

To make blinds with your own hands, all types are suitable, but it is more convenient to start experimenting with paper ones. They keep their shape perfectly and do not darken the space too much. have a luxurious decor, in addition, they are denser, so the light isolation is better.

The better the source material, the better the final version. It must be remembered that bright colors quickly fade in the sun, and restrained tones will retain their original appearance longer.

Accessories and tools

To work, we need the following tools:

scissors;
awl or hole punch;
ruler and a simple pencil;
cord for fastening or decorative ribbon;
glue, you may need double-sided tape;
decor fixer, for example, a beautiful bead, hair clip, clothespin, clip.

In addition, for roller blinds you will need different variants fastening the structure to window hole.

The sequence of making blinds from wallpaper in the form of an accordion

If you still doubt whether or not to make blinds from old ones, see our master class, how simple and affordable everything is.

Let's prepare the tool

For the manufacture of horizontal blinds in the form of an accordion, we need:

paper wallpaper;
hole punch, ruler, scissors;
decorative cord;
2 bead clips with a wide opening;
double sided tape.

Related article:

: advantages and disadvantages, varieties, material of manufacture, recommendations for selection; installation of blinds on self-tapping screws, adhesive tape and brackets; installation rules, price overview - read in the publication.

How to properly measure windows

First you need to take measurements, the quality of their implementation depends on the finished result. Use a tape measure or measuring tape to measure the distance of the window opening between the glazing beads. For horizontal blinds in the form of an accordion, another 25% of the length must be added to the height of the glass, taking into account the folds. Many initially do not measure the width, but cut the finished one already on the window.

In addition, you should choose the length of the decorative cord or satin ribbon - it is also related to the height of the window opening. It is necessary at this stage to decide on the method of fixing it, for example, if the fastening is with the help of clips, an additional 5-10 cm should be left, and if the braid is tied into a beautiful bow, this will require an additional 20 cm.

Related article:

: advantages and disadvantages, varieties; the sequence of installation to the wall and ceiling, to the window profile and between the frames, to the window sashes; recommendations for selection, operation; care features - in our publication.

Step-by-step manufacturing and installation of do-it-yourself wallpaper blinds with a photo description of the process

Before starting an exciting process, you need to free up space on, and even better on. Next, we will consider the progress of work in more detail.

Illustration	Action Description
	Measure from the roll the desired length and width of the future design.
	The width of the strip is equal to the width of the ruler, attach it to the canvas and mark the line with a shallow punching of the scissors.
	Bend along the line in the form of an accordion along the entire length of the wallpaper.
	At a distance of about 10 cm from the edge, make holes with a hole punch. It is easier to do this in several stages, having previously folded a piece of fabric with an accordion.
	Try on the blinds to, if necessary, cut off the excess. Thread the cord into the holes, glue it to the top glazing bead with double-sided tape.
	From below, thread the cord into the bead, as shown in the figure.
	Blinds are ready, the height of the lift is adjustable with a bead-clip.

Advice! To make the blinds last longer, you can bend the upper and lower edges, fix them with adhesive tape or glue, and start assembling the accordion from them.

In details step by step master class making your own blinds from wallpaper can be viewed on the video:

Master class on making do-it-yourself roller blinds from wallpaper and options for mounting them on the window

It will take a little more time to make roller blinds. The technique is somewhat different from pleated blinds in that the canvas does not need to be folded like an accordion, but rolled into a small roll. Also, there is no need to make holes for the decorative tape, since the fastening is more complicated.

What you need to prepare for work

Before you make roller blinds from, you need to prepare:

remnants of wallpaper, it is better to take a denser material;
a bar made of wood or plastic, which will serve as a plumb line;
a metal tube with a small cross section;
mechanism for raising / lowering roller blinds;
glue and double sided tape.

Features of removing window dimensions

The next step is taking measurements. Measure the width by the glazing beads and add 1-2 cm so that the glass is completely closed. The height of the opening should be multiplied by 2 to fold the blinds in half and glue both parts. Thus, protection in the evening will be maximum, and the pattern will turn out on both sides. In addition, an additional 25% must be added to double the height for winding on a roll.

Step-by-step instructions for making do-it-yourself blinds with a lifting mechanism from paper wallpaper

Roll up the wallpaper as tightly as possible.

Bend the bottom edge by 4 mm and insert into the weighting bar.

Insert the lifting mechanism with the chain into the sleeve and fix it on the top of the window. You can use double-sided tape for this, but it is better to fix it to the window structure with self-tapping screws.

In more detail, the entire progress of work can be viewed on the video:

Related article:

If you do not know how simple sewing is carried out, then step-by-step instruction, a photo individual stages, which are described in the article, will help create a practical and chic decor.

Several options for mounting roller blinds in the window opening

Roller blinds can be fixed in several ways:

fix a special cornice - its width is selected in accordance with the attachment point. You can install the structure on the window or above it;
to fix roller blind using runners, hooks, bracket and chain. You need to choose and buy a more acceptable option that can be fixed with double-sided tape or self-tapping screws. For daily use, it is better to choose chains;
ropes - for them, the canvas is folded in half, fixed; on both sides you need to make pockets in which to place weighting agents. To prevent the wallpaper from popping out of the fasteners, it is first necessary to apply glue to the strips. Ribbons, the length of which is 2 times the height of the curtains, should be thrown over the upper holder on both sides of it and tied with a decorative bow under the structure.

Article

Today, many people choose wallpaper blinds for the interior. This option is very unusual, interesting - it is thanks to this that it has gained popularity among consumers.

History of occurrence

Blinds appear in history in the second half of the XVIII century - in Philadelphia. They began to be produced by the English designer John Webster. But only almost a hundred years later, the American industrialist John Hampton receives a patent for them, and so they enter the everyday life of people already “officially”: first from wood and fabric, later (already in the second half of the 20th century) from metal.

The name comes from the French word "jalousie" and translates as "jealousy". Most likely, the origins of the appearance of such products go back to the distant past: to the traditional East and medieval Europe.

In the first case, a particular culture and strict rules of conduct tell jealous husbands to hide the beauty of their own wives. This is how the first versions of such “curtains” appear on the windows: wooden products let in a sufficient amount of light into the room, but hide everything that is inside from strangers.

In Europe, similar products were appreciated by representatives ancient profession, because they helped them to keep the intrigue in front of their clients: through the gaps, outlines were visible, a feeling of something forbidden, distant was created - and at the same time close and accessible, interest was warmed up.

Now blinds have firmly entered everyday life, they are used by people in the most different rooms: from apartments to various offices.

Blinds in the interior

Blinds turn out to be the solution that is suitable for any season and for any type and style of premises. In summer, they will give the space freshness, improve mood, letting in warm sunlight with diffused rays. In winter, they will give a cozy atmosphere. Such products can be used in almost any room - thanks to the large number of options.

If the office is decorated in laconic minimalism or in high-tech style, you can either use classic products that do not stand out from the general background, or choose an option from the wallpaper. So you can completely transform the room, as if breathing new life into it.

It is up to you to choose: whether to use a monochromatic material that blends with the overall style, or to make a bold move, accentuate the windows with color or pattern. Designers have long been using these "games" with color solutions to give freshness to the interior.

If you are the owner cozy apartment in vintage or Japanese style, then it is not possible to find such an ideal option. Remember ancient Japan with its thin paper screens or a small scattering of flowers on the walls. Light blinds made of wallpaper will be a very good solution.

The use of paper blinds does not end with window coverings. They can also be used for doorways, separating rooms in the absence of doors. From such products, a small screen may well turn out, successfully zoning the space or hiding parts of the room from each other. Do not be afraid to experiment, you can always change the material, remove it.

Is it possible to do it yourself?

Blinds are one of the most comfortable types of curtains to use. If we compare them with classic light curtains made of fabric, it can be noted that the blinds are much easier to clean from dust and other contaminants (you can forget about long washing and drying).

Thanks to such products, it is possible to provide both complete darkness and bright light, twilight in the room: you just need to raise or lower the blinds. Diffused light when choosing a paper version is very relaxing.

Today there is a large selection of materials: various breeds wood, metal, fabric, paper (even a newspaper will do), wallpaper. Each option has its pros and cons.

Perhaps the greatest variety is the blinds of the wallpaper. Here a lot of textures and patterns allows you to choose the option that is right for your interior. Ease of handling and care will not make you regret the time, effort and money spent after a while.

A very important plus is that you are completely independent of either the size or the type of products. Attaching such “curtains” (both to plastic and wooden window frames in a room or on a balcony) is as easy as shelling pears.

The main advantage is the price: there is no need to go to the salon and spend money, because such “curtains” can be easily and simply done with my own hands anyone. The result will not be worse, while the creation of such products will not be difficult. You will be completely free to choose colors, style and more.

As a result, you will get a unique material that protects from street light. This is a universal solution for any interior style. When designing an ideal room, many are looking for practicality, ease of creation. It is worth considering a life hack.

To make such a useful decoration for your home is quite simple: you just have to take your time and take into account all the recommendations below. So the product will turn out as accurate as possible, the results of the work will delight you.

When choosing a material, it should be borne in mind that the wallpaper must be paper. Vinyl or acrylic wallpaper cannot be bent and assembled into an "accordion". A thread or rope should be taken strong, capable of holding the entire structure.

To get homemade blinds from wallpaper, prepare the following:

a strong thread or rope (you can choose it to match the color of the wallpaper, or you can focus on it);
scissors and / or construction knife;
hole punch or awl;
glue or tape (double-sided, so that you can fix the entire structure);
fixing device;
pencil and ruler;
wallpaper.

Step by step instructions for the classic version:

Window lock. You need to know the height exactly, then you should add another quarter to it (it will go to create an "accordion"). Cut the rope to the same length as the material. Leave a few centimeters on the sides so that the blinds do not cling, and can be easily raised and lowered. Also calculate the distance from the window where you will hang the blinds: when the products are assembled, there should be some space left to the glass and the frame.
Wallpaper work. According to the measurements obtained earlier, cut off the required amount of wallpaper. Collecting them into an "accordion", you should first make equal indents for the folds with a pencil (using a ruler). In classic blinds, the indentation of each step is 3-5 cm. As a result, the same rectangles should be obtained. Be careful, otherwise the blinds will turn out crooked.
Threading through a thread. Make holes on the sides of the wallpaper with an awl or hole punch. The resulting holes must be secured with adhesive tape from the back and perforated again. With wide windows, you can make a third hole in the middle (a ruler is used to measure). Pass the thread.

Idea: in some interiors, a hemp cord looks beautiful instead of a thread. It is suitable, for example, for interiors that use natural materials (wood inserts and the like) or a small floral print. In more classic options interior, you can try to use a satin ribbon.

Fasteners. Using double-sided tape, attach the blinds across the entire width. Straighten them to the length you need, make knots so that the blinds are assembled evenly. Make sure that the nodes (especially under the lowest and highest steps) do not slip into the holes.
Final touch. To fix the blinds below, you can use both special devices and simple clothespins.

Idea: you can use braid or hemp cord (if the interior and wallpaper pattern allow).

A more interesting looking option (suitable for narrow windows):

Window lock. It happens exactly the same as in the first option. Remember that in the final version below you will get a semicircle half the width of the original.
Wallpaper work. The canvas is drawn and bent into an "accordion" - with an indent of 3-5 cm. After that, you should find the middle, make a hole in it (with an awl or a hole punch). Fix the resulting hole on the back with tape - and then pierce it again.
Fasteners. Attach double-sided tape to the upper step along the entire length, hang the “curtains”. Spread them to the required length - taking into account the fact that the decoration will take another half the width of the cut canvas. Straighten, make knots on the rope / thread so that they do not slip into the holes.
Final touch. Double-sided tape is attached to the bottom step on one half. Then the edges are gently pulled together until a semicircle is formed in the end.