Advertising on the portal

DIY coffee table: step by step instructions and inspirational design ideas. We make and decorate a coffee table: solutions, materials, drawings, examples Simple coffee table

The coffee table was an essential attribute of Soviet kits upholstered furniture. According to the plan, such a set necessarily included a sofa, a couple of armchairs and, in fact, a table. The times of the Union of the Indestructible have long since sunk into oblivion, and Coffee table ik is still in demand. Of course, you can use it not only for storing magazines and other periodicals, but also, for example, for serving a romantic dinner, for needlework and other necessary trifles. He will successfully play the role bedside table or stands for flowerpots or a vase of flowers. In general, this piece of furniture will be needed both in the living room and in the bedroom. Modern furniture stores are ready to offer many options for such tables, but real craftsmen can create their own exclusive version. This is also a way to save money, and sometimes an opportunity to extend the life of some things if you make it from improvised materials. In the article, we will consider how to make a coffee table with your own hands and what you need for this.

The simplest and most familiar material for the manufacture of this element of the interior, of course, is wood. In addition, wood is perhaps the most affordable and easy-to-work material. With the tools that every self-respecting man has in his arsenal, any board can become a coffee table.

Wooden coffee table - timeless classic

In order to make such a table-bench with your own hands, you will need the following materials (all dimensions are given in cm) and tools:

  • boards 2.5 × 7.5 (3 pcs.);
  • boards 2.5 × 10 (1 pc.);
  • boards 2.5x5 (8 pcs.);
  • legs of the required length (4 pieces), fastenings for them;
  • screws - 3.5;
  • self-tapping screws - 3;
  • finishing nails - 3.75;
  • glue for carpentry;
  • putty, paint, primer;
  • sandpaper;
  • saw;
  • drill;
  • a pair of short and long clips;
  • roulette;
  • hammer;
  • Kreg Jig for Hidden Holes;
  • grinder.

Everything is prepared, then let's start manufacturing:

  1. The ends of two boards 2.5 × 7.5 sawn along the length of the table must be cut at an angle of 45º. And cut the boards 2.5x5 with a length equal to the length of the previous boards along the internal saw cut.

The coffee table is an optional piece of furniture. At the same time, its presence makes any living room more comfortable. On the table you can put a newspaper, put a cup of tea or coffee. We will make this piece of furniture ourselves, making it truly original and comfortable.

Low table - a practical interior decoration

The very first coffee table was created in the middle of the 19th century in England. Within a couple of decades, this furniture adorned the living rooms of all European houses. In the 20th century, the fashion for it came to our country. True, in Russia the tables we are interested in are called coffee tables, not coffee tables. But this does not change the essence of the matter. Such a piece of furniture is understood as a small table no more than 40-50 cm high, which can have any ergonomics, look and design. It all depends on the preferences of the consumer.

In furniture stores, low tables are sold in a wide range. You can also find inexpensive design, and a designer thing that can make any interior chic and unusual. But many home craftsmen want to make an original table themselves using a variety of improvised materials. We put a piece of our soul into home-made furniture. So, it will turn out really comfortable and will be able to fill the home with comfort and warmth.

Coffee tables are made from wood and glass. It is also possible to assemble unusual and beautiful designs from:

  • an old window and ordinary books;
  • unused heating radiator;
  • wooden pallets or boxes;
  • dismantled interior or front door;
  • car tire;
  • wicker basket;
  • coils from the electric cable.

There are a lot of options for making a table for tea parties. You just need to show your imagination and listen to the advice of experienced craftsmen who are engaged in self-decoration of their homes. Next, we describe the most popular ways to build coffee tables. And you make your choice suitable option.

We make furniture from chipboard - as easy as shelling pears!

Chipboards - the most available material for creating . Chipboards are processed without problems, easily cut to the required dimensions, have affordable price. For the assembly of low tables, it is recommended to use laminated boards, as they are characterized by an attractive appearance, and products from them are durable. There are many sites on the Internet where it is not difficult to find various drawings with dimensions for making furniture from chipboard. We propose to make a table, focusing on the sketches below.

The design we planned consists of the following elements:

  • shelf dimensions 500x700 mm;
  • countertop 736x736;
  • 4 strips 100x464;
  • 4 plastic corners and the same number of legs (or wheels);
  • 2 bottoms (the dimensions of each of them are 500x700);
  • 4 strips 100x464.

We will fasten these elements with cofirmats, they will need 8 pieces, and 16 3.5x16 mm.

We make the table step by step. First (position 1 in the diagram) we make a shelf from a chipboard (preferably, as it was said, laminated) board. Cutting is done with an electric jigsaw, using a file with a small step. Such a tool will eliminate the likelihood of chips. Then (position 2) we attach the planks to the tabletop (we sit them on plastic corners). We mount the shelf (pos. 3) in the center of the strips installed vertically. We make holes in it with a cross section of 4.5 mm (you will need a drill with an appropriate drill). We fix the shelf with confirmations. Without them, our tea table may not be very stable and reliable in operation. With the help of confirmations, we screw the bottom of the structure (pos. 4).

After that, we fasten the legs (pos. 5). They are not fastened from the very edges of the table, but retreated from them by about 15 mm. Instead of legs, it is allowed to mount small wheels (fixed with self-tapping screws). Then we get a mobile coffee table that can be moved throughout the home. It remains only to bring home-made furniture to mind. We glue with a melamine edge all the visible joints of our table. Visually, the design of laminated chipboard will look perfect! By the way, instead of wood chip blanks, you can use MDF (wood fiber products). The result will be about the same.

Glass table - stylish and elegant

The interiors, made in a modern theme, are perfectly complemented by compact glass tables. They are installed on wooden or chrome legs. It is desirable to use frosted glass. It usually has a special film that protects the countertop from mechanical damage. In addition, stains from spilled tea, coffee, other drinks and fingerprints on frosted glass will not be so noticeable.

The recommended tabletop width is up to 120 cm. There is no need to build a table with large parameters. It will be difficult to fit it into the interior of a standard apartment or a small private house. Choose any form of construction. But if you are making a glass coffee table with your own hands for the first time, it is better to stay in a rectangular configuration. We can buy chrome legs in a furniture store. And wood components are easy to make yourself. Table drawing with standard sizes presented below.

Let's get to work. First, we cut the glass according to the given geometric parameters. This operation must be done slowly. Place glass on flat surface. We outline the cut lines with a simple pencil. Wet the glass cutter sunflower oil(or other lubricant). We apply a metal ruler to the intended line. Gently (without strong pressure) we go through the markup with a glass cutter. Then we shift the glass from the surface, ensuring that the extra pieces of material are on weight. We tap our fingers along the marking line, lightly press. After these actions, unnecessary parts of the glass break strictly along the lines made.

The cut material needs to be processed. First, we clean the edges of the glass with a file, then with a grinder equipped with a diamond tool. Additionally, it is recommended to sand potentially unsafe parts of the glass with sandpaper (fine grit). Then we take a thin felt, mount it on the edges of the countertop and press it against it. This will protect our furniture from scratches. Flip the table face down. We make marks for mounting the legs. From the edges of the tabletop, it is desirable to install them at a distance of at least 50 mm.

We drill holes at the top of the bases of all legs. They will be required to attach the suction cup. Everything is simple here. We process the suction cups with an adhesive, mount them in the prepared holes, press the elements as tightly as possible. After the glue sets, we turn the home-made structure into its normal position and wait about two days. After 48 hours the coffee table will be ready for use.

We will build a structure from wood - a win-win option

Wooden tea tables are suitable for any living space, no matter what kind of decor is implemented in them. Wood products look great in classic interiors, and in the most modern. Making wooden furniture with your own hands is really simple. Moreover, we can build a table of any design - the simplest, with many additional drawers, stands, shelves. With the right approach to business, we will get a piece of furniture that is no different from expensive store tables.

We will not offer a drawing of a wooden structure. Any craftsman is able to draw up a simple sketch of such a structure with the right size. But let's say a few words about the materials and tools that will be needed to complete the work. Stocking up:

  • bars or trimmings of wooden boards (of which we will make table legs and crossbars);
  • two thick boards;
  • varnish and stain;
  • grinder, sandpaper;
  • wood saw;
  • glue;
  • electric drill.

We start creating. We cut thick boards to the required dimensions to make a countertop out of them. We connect them with each other with glue. We are waiting for the structure to stick together firmly. At this time, we make crossbars and legs from scraps of boards or bars. We give the tabletop the selected shape. It can be rectangular or square (it's easier), but tables with a variety of roundness and curves look better. Wood is easy to work with. With the help of a hacksaw, we can easily create a countertop of the configuration we need. After that, using grinder, carefully process the finished elements. Additionally, we rub their surface with sandpaper.

On the countertop, legs, crossbars we apply stain. This composition gives the tree a noble look, providing the effect of antiquity. These elements are completely processed with a stain. We need to apply it not only on the surface, but also on the end parts of the coffee table parts. Nuance. The ends of wood products can be covered decorative materials, for example, butterflies often used for these purposes.

Next, we attach the crossbars to the tabletop, assembled from two boards. The operation is performed using glue and round spikes inserted into pre-made holes. The latter are drilled in the right places with an electric drill. We fix the legs in the same way: we make holes, grease the spikes with glue, insert them into the grooves. The tea table is ready. Let's cover it with varnish so that the design looks perfect, and enjoy the new piece of furniture in the house.

Books, waste paper and an old window - you can even make a table out of them!

As we have already noted, the original coffee table can really be made from various improvised materials. If you have a lot of old magazines and newspapers, you don't have to throw them away. Let's make an unusual table out of them according to the following scheme:

  1. 1. We roll waste paper into tight tubes.
  2. 2. We fix the resulting blanks with rubber bands.
  3. 3. Immerse the prepared tubes into a bucket filled with a water-polymer emulsion.
  4. 4. We are waiting for 5–7 minutes.
  5. 5. We take out the soaked paper blanks and hang them on a rope on wire hooks. Drying should be carried out in a room where there is no dust. Don't forget to put plastic wrap under the rope. Streams of water from waste paper will flow onto it.
  6. 6. From the dried tubes we form a cabinet for a coffee table - just glue them together (as tightly as possible) with PVA glue.

The created cabinet is usually fixed with strong threads and left to dry. Then we cut our homemade table from the top and bottom. We get a neat bedside table. We glue ordinary or mirror glass on top of it, using silicone, which is used to repair aquariums. Advice. Glass should be 1.2–1.5 cm thick. Thin countertops will be unreliable in operation. One careless move and they will crack.

In cases where the old window structure in the dwelling is changed to a new one (for example, to a plastic one), the dismantled product can also be adapted for a coffee table. We are waiting for a minimum of difficulties. We remove hinges, handles, other accessories from the window, wash the canvas well. If necessary, peel off the old layer of paint, polish the surface and paint with a fresh composition. Before us is a finished tabletop. You can install it on any legs. A great option is to make them from volumes that have been collecting dust on bookshelves in your home for decades.

We fasten the books to each other, forming legs of the required height from them.

The procedure is performed using superglue. Another option is to drill neat holes in the books and thread a steel bar through them. Installing the updated window frame on homemade legs and rejoice in our ingenuity. Such coffee tables are good for interiors in retro, vintage, Provence styles. Instead of a window, by the way, it is allowed to use old doors, a mirror or just a large board, which had no place in the household.

Furniture for tea parties from pallets and boxes - simple and original

Wooden pallets are products used for the transportation and storage of various goods and cargo. Pallets perform the same function. But they are considered more modern designs. Both the first and second are ready-made countertops. Low tables from them turn out well. At the same time, the entire process of making home-made furniture from such products requires a minimum of time and labor from the home master.

We just need to thoroughly clean and wash the pallet, process it with a grinder and sandpaper, and paint it in the chosen color. It is not necessary to apply a single color paint. Color the table to your liking. Apply any ornaments and symbols to the pallet. And if you wish, you can not paint the workpiece at all, leaving the wood in its natural form. Small chips, scratches, cracks emphasize the natural texture of the structure.

We install the prepared tabletop on low wooden blocks or on wheels. Here you need to understand that the mass of pallets is quite serious - up to 15-25 kg. Therefore, wheels and legs for a table from a pallet should be selected wisely. They must withstand a given load. However, a pallet of sufficient height may not be equipped with legs. The design and without them will turn out convenient and reliable.

If there are no pallets at hand, it is really possible to make a table from any empty wooden boxes. Suitable containers for wine, vegetables, fruits. From two drawers you can build a small coffee table, and from four - a spacious structure for gatherings with friends. We assemble the boxes into square or rectangular furniture. We fasten them together with nails, putty the installation sites of the hardware with a mixture of glue and sawdust. We decorate the structure, cover it with varnish. We get a chic table.

In the free space between the boxes we put a vase or a pot of flowers. You can also cover it with a suitable sheet product. Nuance. Design experts advise making a plastic countertop coating if the interior of the home is made in the style of minimalism and modernity. For high-tech and art deco decors, it is better to use a sheet of polished steel. Country-style interiors are perfectly complemented by wooden flooring. And the glass, placed on a table of drawers, will harmoniously fit into any decor of the room.

Other ideas for assembling structures - a little more creativity

It is really possible to build a massive coffee table from an old cast-iron radiator. It is enough to tint it a little, install it on strong wheels, and cover it with glass on top (if possible, with rounded edges). The functionality of such a design, of course, is in question. She, nevertheless, weighs 60–80 kilograms. But here she does not hold originality. Not a single guest of your home will be able to ignore such an unusual piece of furniture.

And car lovers have the opportunity to make a convenient table from an old tire from their iron horse. Very often, tires are used to decorate the garden and vegetable garden. But even in the house, with proper preparation, they will look out of place. To create a table from a tire in the now popular eco-style, you need to stock up:

Table from an old tire

  • two circles cut out of a plywood sheet (we take their cross section a little less than the diameter of the tire used);
  • superglue;
  • cord, plait or decorative rope;
  • varnish;
  • self-tapping screws, electric drill;
  • wheels.

We attach plywood circles to the tire on both sides. Products can be put on superglue or (more reliable) on self-tapping screws. If you want the homemade plywood cover to open, one of the circles should be installed on small loops. Then in the niche of the tire it will be possible to store a variety of household trifles.

After that, we proceed to decorate the coffee table. We make a small circle from a rope (harness). We coat the middle of the plywood countertop with glue. Carefully fasten the rope element on it. Similarly, going from the center to the edges, we decorate the rest of the surface. Then we turn the tire over and continue to braid it on the sides. The bottom of the structure can not be decorated. Attach the legs to the bottom sheet (as an option - wheels). The table is ready. It remains to cover it with varnish or a special wax composition.

Fantasize more! Original tables for tea parties can also be made from other improvised materials. The more creative the craft will look, the more positive emotions you will experience looking at it. Decorate your home in a unique way homemade furniture creating unique interiors. Good luck.

Buying new expensive furniture is a financially costly option. As an alternative, for those who love exclusive and unusual interior details, a hand-made method is suitable.

Minimal experience with tools, imagination and creative thinking - that's all that is needed.

You can start with the manufacture of a coffee table, which uses a variety of and unusual improvised materials.

The finished product will decorate and diversify any room, living room or nursery. Often unusual furniture install in country houses and on summer verandas, where she emphasizes the style and brings the desired atmosphere.

Tools and materials

The basis of the future table is the material from which it is planned to make the countertop. There are many options for imagination, we will consider them below.

In addition, the following tools will be required for work:

  • hammer;
  • scissors;
  • pliers;
  • fasteners (nails, screws, etc.);
  • carpentry table with a set of knives (if any) or a hacksaw.

Work on joinery table requires additional skills. If they are available, then you can use a chisel, cutter and planer. When working with a tree with their help, it will be possible to perform more delicate work.

With the help of a sharp cutter or a set of special knives, it is possible to skillfully decorate a coffee table.

Need to stock up additional materials, such as:

  • glue;
  • sandpaper;
  • paint (preferably in the form of a spray);
  • primer;
  • decor (fabric, multi-colored plastic, lace, glass details, etc.).

Wooden coffee table

The most common material in the manufacture of furniture structures is wood. Even in the case of choosing it as the basis, the creator has several options.

The product can be made from:

  • pallets;
  • whole stump;
  • logs.

A beautiful and practical coffee table made of pallets is carried out in several stages:

  • At the first stage, it is necessary to determine the dimensions of the future table, and make markings on pallets.
  • Cut out the core of the pallet. It is important to take into account that outer side should be smooth, and the reverse should be embossed.
  • Treat the legs with a primer and let them dry.
  • Paint the countertop on all sides. Toning can be done in several layers. In this case, each layer must be treated with a fine-grained sandpaper.
  • After drying all the parts, fix the elements with metal fasteners: nails, screws, etc.

Making your own table from a solid stump is even easier. The difficulty lies in choosing a piece of wood that is suitable in size and shape. From the point of view of aesthetics, a pine, birch or poplar stump is suitable for such a table. The choice should be stopped on an even and wide copy with unusual rings.

You can apply the material in different ways depending on the size of the table:

  • low with thin metal legs;
  • medium, where the base of the stump serves as a support;
  • low on wheels.

According to the artist's idea, the stump can be subjected to minimal changes, limited to painting or varnishing. Grinding and installing wheels will help to give a classic look to the product.

Note!

Another option for lovers of natural style is a coffee or coffee table made of logs. Its production does not differ significantly from the previous versions.

The appearance of the finished product almost entirely depends on the appearance of the prepared wooden frame. Variants may differ in the width and expressiveness of the ring pattern.

First you need to process the logs with a piece of skin. To maintain the most natural look, the bark should be left on the sides and bottom. A more rigorous look will be given by metal legs or from an old table. If desired, supports can also be made of wood.

Making a coffee table out of wood is not a difficult task. Such a product brings a certain amount of originality and natural comfort to the home environment.

Chipboard coffee table

Exclusive furniture based on chipboard is a cost-effective option for those who want to work on the product themselves. This photo of the coffee table shows that such furniture outwardly is in no way inferior to a wooden product.

Note!

You need to start work with the development of a drawing of the future table. Ready-made patterns of the base and legs are applied to a chipboard sheet and outlined with a pencil, and then scratched along the contour with a nail.

Thus, you need to cut out two countertops, one of which will be the surface of the table, and the other - the bottom shelf. You need to attach flanges to them, and fix the wheels with bolts.

It is preferable to use rubber wheels because of their reliability. Diversify appearance a glass shelf between the tabletop and the base will allow. Lacquering will protect the thing from premature destruction.

You can make such a table with your own hands from old unnecessary furniture. Decor elements will help to renew and inspire new life into an old interior element.

There are many interesting options coffee tables from: glass, radiator, window and books, front door, wardrobe or chest of drawers, suitcase, reel (cable), etc. Additional options anyone who has imagination and a sense of style can think of it.

decoration

The decor of the coffee table is the final and very important stage of work. Any ideas that fit into the interior of the room are suitable here.

Note!

Consider the most correct and harmonious options:

A table made of pallets, a stump or logs will decorate the applied carved pattern. The tabletop may not be made of solid glass, but of many glued pieces.

The use of fabric in decor should be neat. For this purpose, a material with a thin pile is suitable. Use your old coat as a base and secure with small nails and rivets.

Vintage notes will give lace and fringed ribbons, fixed around the perimeter of the object. It seems as if a tablecloth is covered on the coffee table.

A fashionable trend in recent years has been the use of twine and coarse hemp rope. Attaching it is pretty easy. It is necessary to lubricate the surface of the table with glue, and tightly wrap the base and legs of the table.

The decor in the form of a mosaic looks bright and unusual. Additional gloss will be given by varnishing the surface.

Decoupage decoration. This type of decor allows you to apply any image to the surface of the countertop. This will require special napkins for decoupage. The quality of the result depends on the availability of the necessary technical skills.

In any finish, it is important to take into account the practicality of the finished coffee table and its stability. Apply for this additional fasteners, stain treatment and varnishing.

Putting ideas into practice is not difficult if you approach the process with intelligence, imagination and great enthusiasm.

DIY coffee table photo


Many things can be done by hand. It is difficult in most cases, only at first glance. The new review has collected examples of unique and amazing coffee tables that craftsmen have made with their own hands.

1. Old suitcase



Old suitcases are real finds for designers and out-of-the-box thinkers. Through simple manipulations, suitcases turn into unique furniture and decor items. For example, you can turn an unnecessary suitcase into an original coffee table by simply screwing the legs to it. Such a table will add charm to both a bachelor's apartment and a family living room decorated in a classic style.

2. Boards



Instead of going to the furniture store and buying a finished product, get creative and go to the hardware store for wooden blocks and metal legs. Next, you should connect the boards to each other and screw the boards to them. A handmade table is a unique and versatile thing, as wooden furniture fits perfectly into any interior.

3. Battery



Got new batteries? However, do not rush to throw away the old cast iron radiator. Buy a piece of glass and turn an old battery into an original coffee table that you definitely won't see in the store or your friends.

4. Framed window



An old framed window is a wonderful material for creating a charming living room coffee table. Screw the legs wrapped with coarse ropes to the frame and decorate the surface of the table with beads and shells.

5. Logs



A stunning low table can be made from small logs. First you need to assemble the base of the plywood table, glue it around the perimeter wooden bars, and close the middle with a plywood lid. Next, you need to glue thin wooden cuts on the plywood cover so that it seems as if the table is made entirely of logs, screw the legs and carefully cover all the cracks.

6. Wooden cuts



Large wooden saw cuts are an amazing material for creating a beautiful and original table that will become a real highlight of the living room and will last long years. Making such a table is easy. It is necessary to carefully process the wood and fasten the two saw cuts together, glue a wide wooden leg bar in the center and open the surface with varnish.

7. Pallet



Wooden pallets are an excellent material for creating a wide variety of furniture: sofas, beds, chairs and of course tables. First, you should get a pallet, carefully clean it and paint it in the desired color. There is nothing left to do - screw the legs and put the glass tabletop on top.

8. Wire reel



A large wooden reel for wires is a practical ready-made coffee table. Of course, getting it is not so easy, but if you are lucky, you know what to do with it.

9. Tire



There are many ideas for creating original furniture from unnecessary car tires. For example, you can make a charming table out of a tire, a piece of plywood, a few pieces of wood, and coarse rope.

10. Glass



A budget and very original table for a modern living room, to create which you will need square-shaped glass and low wheeled legs.

11. Glass and books



The original idea of ​​recycling unwanted books. Of course, this is not about fiction and the works of the classics, but about old textbooks that are gathering dust on the shelves. In addition to books, you will also need a small piece of glass and a frame. Insert the glass into a pre-painted frame and attach the finished structure to the book columns.

12. Chest

Wooden table and bowl.


Sometimes, even a broken trough can do a good job. For example, it is useful for creating a coffee table. In addition to a metal bowl that acts as a leg, you will also need a round countertop made of chipboard or wood.

15. Old table



An old coffee table can be an excellent material for creating a new table. You just need to paint the legs and cover the table with a fabric of the desired color.

Premises designed in a classic, ethnic or country style are hard to imagine without furniture from natural wood. Carved coffee table or desk from the array - functional and eye-catching.

Carved coffee table design option

Tables made of wood can fit into both simple and the most demanding interior. The naturally beautiful texture of wood surprises with its originality, and brings some products closer to fine art objects. The unique ability of wood to take any shape allows you to create furniture of the most bizarre shapes with rich carved finishes.

Exclusive tables handmade can be decorated with graceful legs or massive sculptural supports, various ornaments and even whole pictures carved from wood.

The shape of a coffee table made of wood can be either simple geometric or complex curly. Unlike tables made of other materials, carved wood tables can have different heights, and not just the standard 40-50 cm.


Usually, with an increase in height, the area of ​​\u200b\u200bthe tabletop decreases, and vice versa, a classic low table made of wood should have a wide lid.

The wooden table, made of solid wood, has an almost indefinite service life. Natural wood is very durable, and over time, such furniture can be restored. After removing the old coating and polishing, an antique wood table can be given new life and style using tinting products.

Types of artistic wood processing

Noble is created using a variety of. Carved art dates back more than one century and is constantly being improved. Previously, the work of making carved furniture required a lot of effort, talent and time from the master. Finished creations were very expensive, and only wealthy people could afford to buy them.


An example of artistic wood processing

Now many processes are mechanized. Modern machines with the ability to program and high-precision cutting produce products that are not worse in quality and more affordable. Although the work of a master made with his own hands is difficult to replace, therefore many are willing to pay a lot of money for creations made with a soul.

In the process of artistic processing wooden furniture The following carving techniques are used:


Where to put a carved wood table

This piece of furniture, made of natural material, organically fits into the interior and allows you to solve many design and practical problems:


The cost of wood carvings

The final cost of a carved wood coffee or writing table is influenced by the following parameters:

  • type of wood;
  • product dimensions;
  • the complexity and uniqueness of the carved pattern;
  • whether decorative overlays are used or the ornament is created directly on the array;
  • the presence of additional shelves, drawers, drawers increases the amount of fittings and material used, as well as the price of the table.

The most inexpensive carved interior items are made from veneered MDF. So, a coffee table made of MDF with mahogany veneer can be bought from 7500 rubles. The cost of carved solid wood furniture is much higher, even if sawing, processing and standard carving of products are performed on machines.


An example of a carved MDF coffee table

Handicrafts are valued very highly. A small table made of precious wood: mahogany, cherry, beech will cost around 15 - 30 thousand rubles. Furniture made of solid birch, pine or hevea is a little cheaper - from 9 to 13 thousand rubles.

You can also save money if you purchase products from a cheaper array, veneered with valuable species of cherry, mahogany or oak.

In addition, the tables can be combined - with solid wood legs, and the tabletop and shelves are made of veneered MDF. It is quite possible to choose according to your liking and financial capabilities. Well, if you have certain skills in carpentry and a great desire, you can make a unique piece of furniture with your own hands. You will need a certain set of tools, including for carving, as well as boards and a drawing of the table you like.


Carved coffee table pattern variant