outdoor amenities

Show the most beautiful parquet floors. Parquet floors (photo)

The design of the floor influences the appearance of the whole room and therefore should be the basis for a harmonious picture of the whole room. The most beautiful flooring that is relevant at all times is, of course, parquet. but various views parquet countless. Take only oak - both light and dark, covered with wax, varnish or oil ... And if you also take various patterns with which you can lay out individual boards, then the possibilities for decorating a room with parquet become truly countless.

As for the parquet laying patterns, it all depends on the area of the room and its interior. In addition, lighting plays an important role. Each pattern affects the proportions of the room and can visually make it, for example, longer or narrower. In this article you will find an overview various drawings parquet and their influence on the design of the room.

Figure "Run" (or "Deck")

Straight run

The plates are stacked parallel to each other in the same direction. Depending on the laying direction, the room can be optically enlarged or reduced. Dies can be shifted both at the same distance, and randomly. Chaotic styling resembles the deck of a ship, hence its name.

Such a pattern of parquet will fit into almost any style, reminiscent of exciting journeys across the endless ocean. This type of installation visually expands the room, so it is also suitable for small rooms. In this case, the choice of wood and, accordingly, the color of the parquet, which should go well with the furniture, is of decisive importance for the interior.

Parquet pattern "Checker" (or "Squares")

Checker (squares)

Separate dies in such a pattern are combined into a square, and as a result, a pattern resembling a chessboard appears. The squares are perpendicular to each other. And since the length and width of each figure must, of course, be the same (this is a square, not a rectangle), then such a pattern is only suitable for small dies. However, wide and long dies can also be placed in squares, but in very large rooms.

Left - large squares, right - double herringbone

Figure "Checker" from dark parquet

Parquet pattern "Pletenka"

Network

The dice are arranged in such a way that there is a feeling that the parquet is as if woven. The dice can be arranged diagonally or in squares/rectangles.

Various options for braids

Parquet laying pattern "Basket"

This, in fact, is a kind of "Pletenka", in which one row of dies is "intertwined". The pattern can be made from one or two types of parquet: the central element, which differs in color from the “weave”, creates an attractive contrast.

Drawings "Christmas Tree" and "French Christmas Tree"

Christmas tree

To create a Christmas tree pattern, the dies are stacked at the same angle to each other. There are options when 2 or 3 dies are stacked at a time, as in the photo above. Then the pattern is called, respectively, "Double" or "Triple Tree".

French Christmas tree

If the ends of the dies are cut at an angle of 30 or 45 degrees, the French Christmas tree pattern is obtained. This classic pattern is especially suitable for large rooms: all its charm is revealed only with good lighting, which provides a play of light and shadow.

"Double tree" in the bedroom

"French tree" in the living room

Complex patterns of parquet laying

From parquet, you can lay out, in principle, any pattern. Complex schemes for laying parquet are called "Stained Glass", and such laying requires serious skills and great effort.

Of course, these are not all parquet laying patterns, but only the main ones. You can also create your own patterns: combine narrow and wide dies, parquet different colors, laying direction... You can create a completely individual design for your floor.

Dies of different widths and textures create a unique pattern

Light angle very important for the appearance of the floor. If the dies are located perpendicular to the light source, the wood texture becomes well visible, and with it the seams. Sometimes this is exactly the effect that is needed: for example, if the parquet is made of solid wood and you want to emphasize it. If, on the other hand, you prefer a smooth flooring, the wood grain will look more uniform when placed parallel to the light.

Perpendicular arrangement of the parquet to the light source emphasizes the grain of the wood

Floor smoothness also depends on the quality of parquet sanding. Perfectly polished parquet will resemble the water surface in calm weather. And if you can lay the parquet yourself, then special equipment is required for its grinding. Contact the professionals: http://shlifmaster.ru/ciklevka.

Well sanded parquet

Direction, in which individual dice are located, plays great importance. The room will look wider if the slabs are "stretched" along a long wall, which is especially important for long narrow corridors and rooms.

At the same time, the installation pattern of the "Checker" package does not affect the perception of the room and is therefore particularly well suited if you do not want to emphasize the proportions of the room.

The effect of visual reduction or expansion of space also depends on parquet size. The larger the individual dice, the smaller the room seems. Therefore, for small rooms it is better to use small parquet.

Before choosing a parquet laying pattern, plan which part of it will not be covered by carpet or furniture. After all, if the parquet is not visible, why choose a beautiful and complex pattern?

Photo drawings of laying parquet

Perhaps the most important thing we have already said. It remains, perhaps, to bring to your attention another 55 photos of various parquet patterns, among which, without a doubt, you will come across exactly what you are looking for.

Parquet floors are nice solution for the interior of any room. At the same time, high requirements are imposed on them in terms of aesthetics, sanitary and hygienic standards and thermal and sound insulation. As a rule, the use of this flooring material is advisable not only in residential buildings, but also in educational institutions, theaters, museums, and sanatoriums.

What are the features?

The main advantages of parquet floors - in their beautiful appearance and durability of the coating. They are also characterized by minimal sound transmission and thermal conductivity. But it is not easy to arrange parquet floors, because they are subject to high requirements in terms of evenness, smoothness and surface strength.

Each type of parquet consists of a coating, a layer and a base, which are various elements - from wooden logs to draft floors and prefabricated fiberboard screeds. The layer can be leveling layers based on a mixture of cement, sand or polymer solution, as well as bedding, hydro- and. As for the coating, it can be piece and mosaic, in the form of parquet boards or panels with different sizes and patterns.

How is the floor?

Modern parquet floors have a complex structure, so their installation requires professionalism and the ability to work with such material. Quality installation starts with surface preparation. Insofar as parquet board- it's high quality flooring, the allowable difference in surface height cannot be more than 1 mm per running meter. Therefore, in addition to leveling the base with a screed, you will need to use a self-leveling mixture. The final alignment is provided by plywood - it is a kind of intermediate link between the parquet and the concrete base.

We carry out a coupler

The device of a parquet floor involves the laying of a cement-sand screed or a wooden "black" floor on the logs. However, the most commonly used screed. It has certain requirements:

Surface evenness. Alignment is required if there are defects on the surface.
Compressive strength. Depending on the thickness floor covering experts advise using a strong screed. Its minimum thickness is 40 mm.
Low humidity. Since wood is hygroscopic, it will deform over time. Humidity of the base under the parquet should be no more than 5%. To make the screed dry faster and better, a waterproofing material is used.

Plywood as an insulating material

The device of a parquet floor is a complex process in which it is important to foresee many details. For example, the installation technology involves the creation of an intermediate layer of plywood. Its purpose is to compensate for the “movements” of the parquet as a result of changes in the humidity in the room. Before many experts offer to cover the screed waterproofing material- this will protect the wooden floor from the accumulation of moisture and further decay. It is best in such cases to use a foil film or a special primer based on polyurethane.

The substrate is created on the basis of moisture-resistant plywood up to 20 mm thick - it depends on the thickness of the parquet plank. It is best to cut plywood into squares:

So the probability of separation of plywood from the surface will be lower.
The size of the squares will match the size of the planks, so the floor and underlay will show the same amount of expansion and contraction, thereby increasing the durability of the flooring.

Plywood is glued to the base and additionally fastened with self-tapping screws or dowels. After laying, finishing and scraping of parquet floors is carried out.

Choosing glue

To fix plywood and parquet, high-quality glue is required. It comes in several types:

Dispersion (water-soluble). Such glue is optimal in terms of price and quality, shows excellent adhesion, is elastic and easy to use. When using it, there is no smell, the glue dries quickly. When choosing such a composition, attention should be paid to the amount of water - the more it is, the more the geometry of the plank will change due to glue. Dispersion adhesive should not be used if the floors (parquet board) are made of European tree species - beech, hornbeam, cherry, cherry. They are considered unstable because water will warp the planks of them. You should not use such glue if the planks are too large in size.
Polyurethane. This adhesive consists of two components and is excellent when using materials prone to warping and laying wide planks. Such compounds are expensive, but they are distinguished by good adhesion to the surface and the absence of shrinkage. The short drying time means that parquet flooring must be laid as quickly as possible.

Laying on the screed: pros and cons

There is another option for laying parquet boards - without using plywood directly on the screed. Previously, this method was not used, since the adhesives lacked elasticity, as a result, moisture could be sucked into the parquet from the screed.

Today, laying a parquet floor directly on the screed is possible thanks to the application of a waterproofing primer on it. And already a highly elastic adhesive is applied to it, which holds the planks in place. In some cases, it is advisable to supplement the underlay with non-woven fibrous material, which will compensate for the effort of the parquet to come off the base. The technology is good, but too expensive, besides, the work is carried out exclusively with a flat and solid foundation.

Finishing

After the adhesive has hardened and the planks have stabilized (usually it takes about two weeks), you can start sanding the parquet. It's done different type, gradually reducing the grain of the sanding paper. Before sanding, it is required to putty all the cracks and recesses in order to get a beautiful parquet floor - as neat and even as possible.

Now you can cover the surface with varnish or oil. It is best to use the compositions of the same company that produces the rest of the parquet chemicals. The task of varnishes is not only to give the floor a decorative effect, but also to protect it by creating an artificial film on the surface. Most often, up to 7 layers of varnish are required. Parquet can also be coated with oil, which contains natural ingredients. The peculiarity of this finish is the ability to emphasize the texture and naturalness of wood and protect it from moisture. True, the oil coating will need to be updated from time to time.

Warm board or parquet?

How to make a parquet floor if you prefer a heated system? Until recently, it was impossible to think over such a repair method, since the choice of parquet boards was limited. Today experts offer more modern solutions, which allow you to avoid the appearance of cracks on the surface between the parquet planks. Of course, any tree reacts to temperature changes and humidity. But in the Scandinavian countries, covered with parquet has long been used.

Warm parquet floors can be installed using the floating floor method using metal staples. They are needed for fastening the boards to each other, which are subsequently laid on the base without fastening. Such a floor will never be torn off from the base, because it is not connected with it. Staples allow you to regulate the natural expansion and contraction of the tree, which appear with changes in temperature and humidity. And this is very important if you will be laying parquet on a floor with a heating system.

What wood is parquet made of?

Modern parquet floors have a different base, since different woods are used for the production of the material - soft, medium and hard. The higher it is, the stronger it will be, showing a high degree of wear resistance. Birch and cherry are softwoods, oak, ash, merbau are medium, ebony and jatoba are hardwoods.

An important role is played by the stability of wood, that is, the degree of its deformation during temperature changes and changes in humidity. The most stable species are teak, oak, merbau, beech. However, the latter is highly sensitive to changes in the level of humidity in the room. All tree species, on the basis of which parquet flooring is created, can be divided into groups according to color. Light floor material will be obtained from beech, maple, ash, birch, hornbeam, white acacia. Such wood darkens slowly and looks beautiful indoors. Pink tones distinguish pear, cherry and alder wood, red shades can be observed in merbau, jatoba, dussia and other rare tree species. Brown parquet is obtained from walnut, teak, ipe-lapacho wood.

How is parquet classified?

The parquet floor is beautiful and bright. But it is important to consider a few points before choosing a material. Firstly, the type of cut plays an important role - it can be radial or tangential. Radial sawing is considered wear-resistant, reliable and involves the presence of parallel lines along the entire length of the die. The tangential cut is distinguished by arcuate lines and is considered the most affordable.

Secondly, you need to carefully consider the wear layer - that is, the layer of the bar from the front surface to the upper edge of the spike. Thirdly, the thickness of the parquet depends on how long and reliably the floor will be used. And most importantly, the fastening of the spikes and grooves must be tight and tight while maintaining a gap of 1 mm.

massive board

The modern market offers wide choose wooden coverings - parquet, massive board, parquet board. Massive board (GOST 8242-88) is created from solid wood and has large dimensions, unlike parquet. Its distinctive feature is the chamfer, which is available along the perimeter of the board. It highlights each board in the flooring and emphasizes its dimensions. Solid wood boards can be supplied sanded or finished with lacquer, oil or wax. In the second option, the parquet floor will not need to be processed.

In the standard version, the installation technology involves fixing a solid board with glue and self-tapping screws. When laying this variety, you need to remember a few rules:

Lacquering is possible only after laying.
The massive board does not fit on the glue with water base or solvent based.
The "floating" method for laying a massive board is not suitable.
Do not attach the board to a screed based on cement and sand.

Most often, laying errors occur due to incorrect selection of boards in width, the use of the wrong adhesive, or insufficient pressing of the material.

Parquet

The most beautiful is the parquet floor. The photo shows how much interesting solutions can be implemented in your home. Piece parquet is created from solid wood with a thickness of 14-22 mm and complies with GOST 862.1-85. If the length and width of the planks are multiples, then you can lay out the pattern in the form of a deck or herringbone. Parquet planks are left and right, and if a herringbone or square pattern is laid, the same number of both planks will be required.

Parquet planks are securely connected to each other thanks to ridges and grooves. If the implementation of artistic elements or borders is required, then modular elements are used for this. The parquet plank is fixed with special nails using a pneumatic gun. All varieties of piece parquet are semi-finished products, which, after laying, require grinding and treatment with a protective compound.

Parquet installation is carried out with a number of reservations:

If the parquet is chamfered, it must not be varnished after installation.
The parquet is laid only by gluing to the base (the “floating” method is not suitable).
The parquet is not attached directly to the screed.
If the laying was carried out with a dispersion adhesive or a solvent-based composition, then sanding should be done immediately.

If installed incorrectly, the wooden parquet floor will at least look unaesthetic, and at the maximum, the varnish layer will begin to crack, cracks will form, and the integrity of the base structure will be violated.

After preparing the base, you can start laying parquet:

Laying starts from a long wall: the first board is applied to the wall in the corner, a wedge is installed between them for the gap between the floor covering and the walls.
The subsequent planks are laid along the wall. Watch for the accuracy of joining the ridge and grooves.
All subsequent boards are laid in the same way.

parquet board

This floor material complies with GOST 862.3-86 and is a multilayer structure. The top layer is hardwood of valuable species, the middle layer is pine or spruce bars, the bottom layer is needed to stabilize the base and is made of plywood or softwood veneer. All elements are securely glued together with a special waterproof adhesive, which ensures uniformity and adhesion strength of all layers. Such parquet floors received good reviews, because the surface is even, smooth and beautiful.

When using this variety, you must carefully follow the installation steps. The parquet board can be laid in a "floating" way, while it is necessary to monitor the moisture level of the base and the gap with the wall.

Features of care and repair

The flooring, which is based on natural wood, needs careful and meticulous care. Most importantly, the room should be provided with optimal temperature and humidity: 20-24 degrees at a humidity of 45-60%. The real enemies of parquet are dust and sand, which lead to rapid abrasion of the varnish or oil coating. You can clean such a floor with a damp cloth or vacuum cleaner, but not washing!

To avoid scratches, special felt pads should be glued to the legs of the furniture. Laying parquet should be carried out in rooms that are well heated in winter, since a sharp drop in temperature and humidity will lead to the rapid destruction of the floor.

How to repair parquet floor? If the problems are small, for example, scratches have appeared, they can be removed with a retouching pencil or repaired with putty. Such areas will only need to be sanded after drying and varnished. If water is spilled on the parquet, the damaged area may be deformed. In such cases, it is often necessary to re-lay the parquet or lay a new one.

Another major problem with parquet flooring is creaking. With use, it can become more and more powerful. You can fix the situation in several ways:

Drill a hole in the center of the area where the creak is heard. As a rule, this is enough.
If the base of the floor is hard concrete, you can pour a special mixture of cement and water into the hole.
If the creaking area is too large, then the only way to get rid of the creaking is to shift the parquet again. It is costly and time-consuming, but reliable.

One more common problem- drying of parquet. This is due to the fact that the slats dry out and decrease in size as they are used, so they begin to stagger. Such strips must be replaced, since these areas are not repaired. If this is observed in a small area, then individual strips are easier to replace with new ones.

Under the influence of humidity changes, the parquet is moistened, then dries, and as a result, cracks appear. It is impossible to exclude this process, you can only monitor the humidity in the room using a humidifier. If the gap is very small, it is enough to clean it and then putty. If the gap is larger than 5 mm, then the putty will not help. In this case, it needs to be deepened, cleaned, cut out an insert from a suitable tree and driven into the slot. Then the surface is sanded and varnished.

In some cases, the strips may peel off. This is caused by several reasons: poor-quality glue or mastic, violation of installation technology or high humidity in room. In this case, the problem is solved in different ways depending on the basis. If it is concrete, then the nests of the slats are carefully processed, then primed and dried. The strips are glued back with mastic. When wooden base the nests of the planks are also cleaned and smeared with glue, then the loose planks are inserted back and nailed.

Beautiful parquet floor perfect solution for any interior. The main thing is to correctly approach its installation.

Parquet is considered one of the most prestigious and expensive species floor covering. Of course, you need to do it right. Only in this case the room will look harmonious.

The color of parquet dies can have a very different saturation. In some rooms, light parquet will look better, and in some dark. How not to make a mistake and make right choice? Let's look into this in more detail.

The role of parquet in the interior of the apartment

The main advantage of parquet over other types of flooring is, of course, its aesthetic appeal. Natural wood of any shade and texture in any case looks prestigious.

The dies themselves can have different sizes and even shapes. Most often in residential premises are used rectangular. Also a fairly common option are triangular. Artistic parquet in the interior is the most beautiful option. Such a coating can consist of dies of various shapes.

Dies of artistic parquet can have a variety of shapes.

Important: For finishing the floor in small rooms, it is worth using a coating of small dies. In a spacious room, you can lay a variant of parquet with medium and large dies.

Based on the features of interior design. So for a rich classic, mahogany, oak, walnut, cherry, or some other exotic or noble species are well suited. For a simpler interior, you can choose pine, alder, birch, etc.

Parquet can become a real decoration of any interior, including a room in a modern style.

Choice of plate colors

Perhaps the most important criterion for choosing a parquet, whether it is a modular or piece version, is, of course, its color.

bleached coating

For small and medium-sized rooms, it is best to choose light-colored parquet. In this case, the design of the apartment will greatly benefit. The fact is that such shades allow you to make the room visually somewhat more spacious. In addition, light shades should be used if you want to make the interior light, modern and versatile.

The light coating makes the interior light and versatile

On a note: The only exceptions are bleached oak and some varieties of exotic woods with light wood.

Light and white parquet (not only bleached oak, but also maple, bleached beech, ash, hornbeam, birch, larch, alder, etc.), firstly, visually expands the boundaries of the room, and secondly, brings a touch of exclusivity to the interior . This type of coating can have different shades. For well-lit, sunny rooms, professional designers advise choosing light gray parquet in a cold shade. For rooms located on the north side, a warm, slightly beige shade is more suitable.

In rooms with windows facing north, it is worth laying a light coating of a warm shade.

The same option, as well as a sand-colored coating, looks better in expensive rich classic interiors. Cold shades and “worn” are more suitable for rooms decorated in vintage style. For flooring modern interiors usually a slightly "blue" variant is used.

In a well-lit room, it is best to use a gray, slightly "purple" or "blue" option.

Important: White oak parquet will look beautiful in an apartment only in combination with light-colored furniture. Sometimes in such interiors the method of contrasts is also used. That is, some elements have, on the contrary, a very dark color.

If you want to finish the floors with bleached oak parquet, special attention should be paid to lighting. Do not use lamps that give too warm yellow light. Under such lighting, the white surface of the floor is likely to appear unpleasantly yellowish. This does not apply only to bleached oak of a grayish tint.

When using a light coating of a yellowish tint indoors, the lighting must be selected correctly

Advice: It is not necessary to cover the parquet with light varnish. This option will most likely look like linoleum or laminate. It is better to treat the surface with wax. Matte light parquet looks much richer than glossy.

Dark colored parquet

The dark color of the parquet is an option that is well suited only for large areas. A real decoration of any interior can also be, for example, ebony parquet, perfectly polished rosewood, dark merbau, bog oak, etc. Wenge parquet looks very beautiful and presentable in respectable premises. The texture of this wood has a rich red-brown hue with active gold inclusions.

Photo of parquet in the interior. Wenge is one of the most prestigious types

When using a dark finish for the floor in the design of the room, the method of contrasts is usually used. In order for the room not to look too gloomy, you can, for example, lay a light-colored carpet on the floor or arrange light-colored furniture in the apartment. Very often, colors such as cream, wheat, sand, white and pale vanilla are combined with dark parquet. The texture of dark parquet is often emphasized by lacquering.

On a dark floor, a light carpet will look best.

Advice: Do not use black parquet for finishing your living space. Otherwise, the interior will look too gloomy. Chocolate or dark brown finishes look much better in apartments.

Other parquet colors

Both dark and light floor finishes and beautiful parquet of other shades look very solid in living quarters.

Quite aesthetically, for example, a rich pinkish version of such a finish for the floor (cherry, pear) may look. It fits very well in a modern design room.

A warm, cozy atmosphere can be obtained using yellowish and red parquet (olive, boxwood, teak). The same effect, but with a touch of solidity, is created by brown parquet: walnut, sucupira, lapacho. The red version of the floor finish looks very presentable and quite original in the interior of the living room - mahogany, padouk, cork tree. Gray parquet in the interior is used if you need to give the apartment a modern, stylish look.

Colored mahogany parquet is one of the most beautiful types of floor finishes.

The decoration of the apartment can be parquet of absolutely any shade. Even not too expensive options are able to make the room cozy and at the same time presentable. The main thing is to correctly combine this type of flooring with furniture and other furnishings, as well as take into account the size of the room.

Since the time of its invention, in Europe in the 13th century, parquet has been considered the most luxurious, noble, refined and incredibly beautiful floor covering, subtly emphasizing the style and exclusivity of the room. Parquet is always at the peak of popularity.

Firstly, it has proven itself from the practical point of view: natural, durable, maintainable, with proper care it will last for many decades. Secondly, due to its impeccable aesthetics and "many-sidedness", beautiful parquet is suitable for any design style, it defines and sets the tone for the design. Let's see what role parquet plays in the interior, how the color of the parquet affects the geometry and appearance of the space, when it is better to give preference to light or dark tones, and in which cases it is better to limit yourself to neutral shades.

diversity

Modern processing technologies have significantly diversified the texture, color, shape and texture of parquet. And today, the usual types of wood appear in a completely new guise, opening up huge opportunities for design. For example, maple and birch were previously considered the lightest, and today even a reddish oak coating can be bleached to a very light, almost white, and at the same time subtly emphasize the texture of the wood, or vice versa, painted black and patinated.

Noble walnut parquet is a traditional way of finishing floors, it smoothes the interior, makes it homely, cozy and comfortable.

It became possible to choose the size of the slabs, the length of the piece parquet ranges from 18 to 49 cm, with a width of 4-7 cm, and the parquet board can be more than 2 m in length. Parquet modules have become a very convenient invention - these are boards on which several lamella according to the drawing. Such material is easy to lay with your own hands, even without skills.

Gray parquet in the interior is a compromise between dark and light, it is calm, but at the same time, very stylish and original design premises

throwing, artificial aging, painting wood in colors unusual for natural materials, applying patina, staining, coupled with a variety of sizes and different ways installations make parquet a versatile floor covering in any interior.

Oak, mahogany, dark walnut parquet is most suitable for cabinets

Parquet design has the main task to create such a coating that would most fully meet the functional and aesthetic needs of the owners of the premises. With a competent approach, the parquet floor becomes the dominant element, it sets the tone, but at the same time, all other details are not lost, but rather work for a common task: to decorate the room, emphasize all the advantages, and gently dampen the shortcomings. Pay attention to the photos of the parquet in the interior, selected in the gallery, they perfectly demonstrate how the coating can highlight the architectural features of the space, make it more expressive and comfortable.

Parquet color - choose, do not make a mistake

Neutral soothing tones with a red or brown tint are classic flooring finishes: calm, familiar, suitable for any style of interior, but without zest and originality, standard.

Contrasting light and dark colors dominate the modern design of the floor. This trend has been traced at all times, and today such a design approach is more relevant than ever, interesting and extraordinary solutions that can transform the space, make it brighter and more expressive. It is this goal that can be achieved thanks to the dark and light shades of parquet, it becomes possible to play with the geometry of the room, and such a floor can also serve as an excellent background for highlighting other interior elements: furniture, ceiling decor, arches, etc.

Artistic parquet in the interior is always luxurious and elegant, in the photo there is a contrasting ornament that helps to straighten the proportions of the room

Light parquet in the interior

It is no secret that light parquet: a very popular bleached oak or maple, as well as birch, hornbeam, beech of some varieties, ash with iridescent white-yellow sapwood will make the room lighter, add airiness and visually expand its boundaries.

For small areas, you should choose a coating of light shades with a slight texture pattern. If the room is narrow, then even white parquet is better to lay on a shuttle type, perpendicular to a narrow wall or herringbone, so the proportions change, it turns out an optical illusion that the room is wider.

Light parquet goes well with both bright and pastel colors of finishes, for a balanced interior, the main thing is to balance the palette

Advice: It is better to cover large areas of the floor with larger slabs, and to break up the space so that it does not look like a faceless homogeneous mass, you can use dark inserts: highlight zones, the center, or lay a contrasting strip along the perimeter at some distance from the walls.

Light or white parquet is ideal for creating an airy rococo style, ethno trends, minimalism. The thrown white oak parquet board will add a touch of lightness and sophistication to the country style and Provence. Black birch will help create such modern styles as contemporary and shabby chic, a light palette of boards with thin dark veins and wormholes will look not just luxurious, but emphasized grace.

For rooms with a lack of light, choose warm shades e.g. light golden oak parquet

In sunny rooms, where there is always a lot of light, you can safely lay parquet in cold light shades, for northern and shaded spaces it is better to use warm colors. Creamy, creamy, pinkish, beige parquet will enhance the effect of visual perception, rooms with such a floor always seem larger, higher, more spacious.

Bleached oak in a cold palette can be balanced with bright and warm colors of textiles.

But when laying a light flooring, you should know that it will be a reflection for all other interior items. Therefore, it is necessary to carefully choose the color of the walls and ceiling. For example, white oak parquet in cold shades combined with yellow or brown walls will acquire yellowness, disharmony will appear in the interior, in this case it is better to use gray, blue or silver shades. But the furniture can be of any color, the light floor is the perfect backdrop for decor and details.

Light parquet goes well with furniture of different shades.

dark floor

Dark parquet is universal, aristocratic, noble, it has been and remains relevant for creating the most different styles. This is classicism, oriental and japanese styles, hi-tech, borocco, loft, etc. Although dark floors visually narrow and clearly limit the space, you can correct the situation with skirting boards of the same color. But the room becomes chamber, cozy, authentic - this is a special world for people who prefer rigor and comfort "in one bottle."

Black stained oak parquet looks brutal, but it goes well with white furniture with gold or silver patina, deep dark brown wenge is perfect for cream walls and furniture made of milk oak. The floor made of polysander is somewhat variegated, but on the other hand, it can be matched with finishes and interior elements of any shades, from golden honey to dark chocolate brown.

It is better to combine dark brown wenge parquet with matching skirting boards and platbands, this technique allows you to combine the interior

Dark parquet is the perfect canvas for bright or contrasting decor. To achieve the desired effect in the design, colorful textiles and strict or, on the contrary, fanciful forms of decor and furniture are appropriate. As for the color palette, any colors are combined with such a floor, but all shades of white, red, purple, gold look the most advantageous.

The dark polywood floor goes well with discreet monochrome walls, furniture of any color goes well with it.

Of course, dark parquet with a glossy finish looks very impressive, deep, stylish, it reflects the furnishings and enlarges the space, but all the dust particles and tiny scratches are visible on it. Matte dark floor is a special chic, elegance, respectability, besides it is more practical than gloss, it hides scuffs and minor flaws.

A dark floor combined with white furniture is a win-win technique for creating a strict and elegant interior.

Summarizing, I would like to note that black-brown, light and white shades of parquet have many faces. To emphasize all the advantages, to complement, smooth, balance and not crush the beauty of the flooring, you should delicately select colors for interior decoration.

The best way to give your home coziness and an atmosphere of wealth and luxury is parquet in the interior. If you decide to lay parquet from natural wood, then you will love our article with many photos and ideas for inspiration.

Parquet in the interior

Parquet in the interior- perhaps the most ancient floor covering, which still holds the palm in popularity. Expensive parquet is a wealth that has been passed down from generation to generation. It was carefully looked after, polished, waxed to a shine in order to preserve the parquet in its original form for posterity.

Today, the place of parquet in the interior is increasingly occupied by linoleum or laminate, an inexpensive analogue of parquet. However, nothing compares to appearance with a beautiful texture, as well as the feeling you get when walking on it barefoot.

The parquet looks especially beautiful in, as well as in the spacious dining room. Light oak planks are perfect for romantic bedrooms and dressing rooms.

Unfortunately, today parquet is quite expensive, however, if you can afford it - by all means do it! You will see, the durability and practicality of this flooring will exceed all your expectations.

Due to the high cost today, it has become quite difficult to find quality parquet, so before you go looking, we recommend that you go through online stores. For example, laminate click, where a large selection of flooring is presented.

So, today we invite you to be inspired by the ideas of using parquet in the interior and admire the amazing photos that we have found especially for you.

Parquet in the interior: photo

Today, photos of parquet in the interior can be found not only in vintage-style houses, but also in modern apartments. Parquet gives a surprising warmth and a feeling of comfort to the cold minimalistic design. And how beautiful the parquet looks in!

Subscribe to our updates, join the Vkontakte group and always stay with us!