outdoor amenities

Master class on making a wooden chandelier with your own hands. DIY wood lamp Drawings of homemade chandeliers

We all know that the most high-quality and useful material for the interior design of any room is wood. Especially beautiful lamps are obtained from this material. This is due to the fact that properly selected lamps in combination with wood give a soft and pleasant light, just right for rest and relaxation. And where else can we rest, if not at home?

It is worth noting that, having unquestionable advantages, such products are quite expensive. But with the desire and due diligence, such lighting fixture you can do it yourself. In doing so, you can save a lot of money and get a unique and beautiful chandelier.

Why a tree?

AT modern world, where plastic began to play an increasingly important role, and wood faded into the background, in the interior it still does not intend to give up its positions. Today, due to the prevalence of plastic, wood has become a more expensive and presentable material that is not available to all people. This is because the tree has the following advantages:

100% environmentally friendly. Only wood is an environmentally friendly and natural material that undergoes a minimum of modifications during processing;
a positive effect on the human psyche and his emotional state;

Note! Pine and spruce have the best relaxing effect. Especially such lamps are useful for asthma patients, as well as for chronic respiratory diseases.

ductility of the material for processing. From wood, you can make lamps of any complexity and any appearance;
positive association. Using wood in the interior of the room, you will achieve greater comfort, as well as give the room a more impressive look;

Wood and interior

exquisite and beautiful appearance, which fits perfectly into modern styles, and in traditional;
the ability to change the accent in the room or emphasize a single design idea;
wide scope for creativity. Here, thanks to a large number of tree species, you can let your imagination run wild;
a large assortment of breeds for the manufacture of lighting fixtures (chandeliers, wall or table lamps);
an excellent combination of wood with other materials (glass, steel or openwork forging, paper, fabric, plastic, etc.).

It is just from wood that it is easiest to make a lighting device with your own hands. Especially if it's a ceiling chandelier.
Nevertheless, despite the rather impressive list of positive aspects of working with wood, it must be remembered that there are certain disadvantages here. These include:

wood can catch fire easily. Do not use light bulbs in such devices that get very hot during operation;

Note! In wooden lamps, LED or fluorescent bulbs are most often used, which do not create a fire hazard.

the need to protect the material from the adverse effects of environmental factors: humidity, temperature and insects. Exactly ceiling chandeliers most malleable negative influence tree insects. It is noteworthy that lamps made of needles or pine are less at risk of damage by insects;

Antiseptic treatments

high cost of material, especially rare and exclusive breeds;
during drying, the chandelier can change its volume, as well as deform. As a result, cracks or chips may appear on the product.

These shortcomings, as well as ways to deal with them, must be taken into account if you decide to make a chandelier on the ceiling with your own hands. Ceiling chandeliers, however, like other types of lighting fixtures, are quite easy to do with your own hands, especially if you know the detailed instructions for this process.

What you need

The set of what you need when assembling a chandelier on the ceiling with your own hands may vary depending on the complexity of the design you have chosen. But the general list of what you will need, regardless of the model you choose, includes the following tools:

a set of tools for working with wood (for carving, etc.);
wire pliers;
hammer and screwdriver;
tape measure or ruler;
drill;
pencil;
a set of brushes.

In addition, you will need the following materials:

Decor materials

antiseptics for wood treatment to make it more resistant to adverse room factors;
elements of an old chandelier: a base with a plinth, light bulbs, wires, etc.;
decorative elements to give the lighting fixture the desired appearance. It can be a variety of things: cups, fabric, paper, badges, ropes, etc.

Please note that this is only an approximate list. necessary materials and tools. It can be easily supplemented with other devices that can simplify or improve the upcoming work.

When assembling a ceiling chandelier with your own hands, the following rules must be observed:

the tree must be protected around the perimeter with a special solution. Such a do-it-yourself ceiling chandelier will serve you for a long time without compromising its performance;
to protect the tree, it is necessary to use only high-quality products that have not yet expired. Otherwise, all your actions will come to naught in just a few years of using the product;
take care of the system of fastening the chandelier to the ceiling. Stylized chains can be used as fasteners. The best solution would be a multi-point fixation system. The fact is that the design can turn out to be overall and relatively heavy. Therefore, it is necessary to create maximum conditions for security;
when connecting the chandelier to the power supply, use the services of a knowledgeable person so as not to burn the device and avoid electrical injury.

Luminaire options

Homemade wooden ceiling chandeliers can have the most incredible shapes and sizes. After all, there are a great many species of trees themselves. Here everyone can show their creative talent and create something new and unique.

Various options

In our article, we present some of the most popular and spectacular types of ceiling-type chandeliers. But you have the right to modify or improve them so that they are more suitable purely for your interior in the room.
Let's consider them separately

coffee service

Creating holes

This is a very beautiful type of chandelier that can be used in both the kitchen and the living room. Here, as a basis, we take a board (best of all, ash, birch, spruce or pine) and carry out the following manipulations with it:

drill holes in the board;
we cover the board with stain after it has been processed with sandpaper. If oak was taken, then you can do without painting and varnishing;
We take several cups of coffee and saucers to them. You will also need wires and rings, the same number of cartridges as cups, and twice as many rubber gaskets;
make holes in cups and saucers. To do this, you need to use only a special drill for working with tiles or glass;

Note! You need to drill slowly and very carefully.

Ready chandelier

insert cartridges with wires into the holes made and fix them;
then we fix the resulting chandelier to the ceiling.

If desired, the lamp can be decorated. But the cups themselves are already an excellent decor. Remember that the main thing is to maintain the style, and not just hang everything that is unnecessary in the house on the chandelier.
If desired, such a lighting device can be hung by chains by attaching rings on the sides of the board.
The most difficult thing in such a chandelier is drilling holes in ceramic cups and saucers, as well as connecting the product to the power supply.
In general, we can say that such a model is quite difficult to make with your own hands. But do not despair, there are much easier models to implement.

And the snag will come in handy

Cutting pattern

An easier way to create a chandelier is to use ordinary driftwood brought from the forest. At the same time, light bulbs in this situation can play the role of stylized fruits, leaves or other decorative elements. The main difficulty here will be masking the wires.
The assembly of a ceiling-type chandelier made of wood in this case will occur according to the following scheme:

choose a branch that you like more with its bends;
we clean its surface from excess bark, lichens and moss;
then we dry the driftwood well and grind it using sandpaper;
choose the bulbs that are most suitable for the stick you have chosen. Use only energy-saving and non-heating light bulbs;
for laying wires, we make shallow cuts, into which they will then be placed;
in case of failure, all unnecessary cuts can be easily masked with putty;
light bulbs should be placed on the edges of such driftwood. At the same time, they can be placed in plafonds or simply fall from the branches. Both options will be quite original.

Final result

Here you can use a wide variety of decorative elements: beads on a string, glass balls from an old chandelier, soft toys and other materials. Thanks to this, your craft will become unique, unusual and inimitable.
You can hang such a chandelier with screws or chains. In the first case, you will receive a ceiling model, in the second, a suspended one.

Other options

Country style

Another popular option is to assemble a country-style lamp. To do this, you will need irregularly shaped boards. They should be processed according to the brushing technique and covered with stain. We install shades along the edges of the boards and, in fact, that's it - the chandelier is ready.

In addition to snags and boards, you can use any household items containing wooden elements. For example, an old small wooden wheel would be a great option. We process it by analogy with other options for chandeliers:

first clean from dirt;
then we process with sandpaper;
put on stain.

After these manipulations inside wheels we carry wires, fixing them with clamps. This will make them invisible. Next, either make holes for the cartridges, or hang them at a short distance from each other.

Wheel chandelier

For ceiling mounting of such a lighting fixture, we use a powerful mounting system. This is due to the fact that the lamp will turn out to be quite large and weighty. Therefore, it is best to place the chandelier on chains.
As you can see, almost any wooden object can be used to create a ceiling lighting fixture on your own. It can even be half a wheel, various old wooden lamps, hand carved wood, or other crafts. Therefore, such lamps are good if you want to move away from ordinary lamps and get something original and unique. In recent years, hand-made style has become very popular. One of its main advantages, along with uniqueness, is the complete environmental friendliness of manufactured products. And a wooden chandelier in this case is the best confirmation of this.
It is quite possible to make a ceiling-type chandelier out of wood with your own hands, using a wide variety of materials. Do not forget to treat the tree with special protective equipment, and in everything else, just bring your desires and fantasies to life. Be consistent, and an excellent result at the end of the work is guaranteed to you!

All photos from the article

Over the past few decades, there has been practically no design trend left that would not use wood products to one degree or another. The lamp in general and the chandelier in particular are objectively one of the most noticeable interior items, so hanging chandeliers made of wood are deservedly considered perhaps the most popular trend at the moment.

Features of ceiling lamps made of wood

Any wooden object in the interior of the room on a subconscious level is associated with warmth and comfort. Traditionally, home-made wooden chandeliers are used in all areas of oriental themes, where the geometric correctness of the lines and at the same time warmth natural wood contribute to a relaxing holiday.

Such a direction as country is generally impossible without the use of natural materials. The rural style at all times was characterized by the use of slightly rough unusual forms. The massive appearance of such lamps creates a feeling of reliability.

Antique wooden chandelier is associated with medieval romance and knightly tournaments. Inclusions of forged metal elements give this design an exquisite lightness and unique flavor.

Advantages of wooden lamps

The first thing that catches your eye is the naturalness of such a chandelier.. Hard to find more environmentally friendly pure material. Moreover, being constantly near a heat source, wood releases into the atmosphere beneficial to health. essential oils and micronutrients.
The processing technology of this material, as a rule, is not very complex.. Relatively simple assembly wooden structures accessible even to children.

Chandeliers for summer cottages made of wood are deservedly considered almost the most best solution . After all, the cottage itself is designed for a country holiday closer to nature.
Not the last role is played by the price of the structure.. Even if you use, the total cost of a homemade chandelier will be affordable for almost any budget. But as a rule, all costs end with the purchase of cartridges, light bulbs and wires, and a few planks or twigs can always be found in any country house.

What are the disadvantages of such lamps

Opponents will immediately point out to you the fire hazard of such a chandelier. There is certainly some truth in these statements, but with proper installation and the use of LED or other slightly heated light sources, you are practically in no danger. In addition, on sale there are a lot of natural impregnations that prevent ignition.

Important: these homemade lamps, no matter how you impregnate them and no matter how competently you collect them, it is highly undesirable to place them near sources of open fire. For example, next to the fireplace or in the barbecue area.

Like it or not, wood is a living material and very hygroscopic. Wooden chandeliers for a bath look great, but it is better to mount them away from showers and steam rooms. Constant changes in temperature and high humidity are far from conducive to the preservation of the massif. In this case, a chandelier under a tree is more suitable.
Another serious problem of this material is the high probability of damage to the array. different kind pests. But as mentioned above, no one bothers you to impregnate your chandelier with natural protective compounds.

A few words about self-assembly

Do-it-yourself antique chandelier made of wood, the thing is quite real. In essence, all you need is a great desire and a standard set of carpentry tools, which is in almost every home.

Light is one of the most important factors that affects our life. In addition to the main function of lighting, it can create a unique atmosphere, help to optically manipulate the size of the space, and also has great decorative properties.

Light is an important garden and terrace architect. It can create a romantic mood, enhance the beauty of plants, or simply dazzle the darkness, allowing you to spend time outside the house late in the evening and at night. The lighting itself can take on highly decorative forms, or, conversely, makes it possible to enjoy its elegant simplicity.

A brief overview of the types and styles of wooden lamp designs

Many people like classic lanterns that illuminate an open space. The wooden part of the garden lantern will perfectly fit into a cozy composition. With the help of such lighting, you can create a real idyll, especially on hot summer evenings.

For owners of beautiful country houses made in the style of antiquity wooden castles or taverns, lighting fixtures made with wooden elements would be appropriate. A large chandelier made of natural wood will decorate the entire interior. For example, a wooden wheel chandelier.

An original proposal for a wooden lamp for the living room is a chandelier that has been twisted with strips of natural wood veneer. This three-dimensional, intriguing shape will provide a subtle play of light and shadow in every living room. And during the day it will be a decoration. Wood veneer coated with acrylic lacquer will delight others for many years.

An addition to the interior in the style of minimalism will be a wooden floor lamp or table lamp, made in a thin, simple and strict geometric shape without curls and various additional decorations. Finished with acrylic lacquer, they will add charm to any bedroom.

For a stylish decoration of the interior of the sauna (bath), it would be appropriate to use lamps in the appropriate style. Decorative lattice made of wooden planks different designs, will become not only an exquisite and harmonious decor for a steam room, but will also perform the protective functions of a lamp from possible damage and will contribute to the soft diffusion of light, creating a relaxing effect.

If you are bored with the monotony of the interior, in particular, in matters of lighting, and you are ready to change the design of the lamps yourself, feel free to get to work!

Instructions for making wooden lamps

Consider a few master classes on how to make wooden chandeliers with your own hands.

To perform such work is simple, the result will conquer the elegance of forms.

Lamp in the form of wooden squares

What is included in the geometry of the room? Walls, furniture, curtains, doors and windows. But not only. You can refresh the design with an unusual chandelier, the shape of which will resemble rectangles connected by the sides of the faces to each other, inside each rectangle there is one diagonal.

To make a chandelier you will need:

1. 18 pcs. wooden planks.
2. staple gun and staples.
3. Finished metal lamp socket.
4. Paints for metal.
5. Ruler.
6. Pencil.

Step-by-step instruction:

Preparation of the frame of the chandelier from wooden planks in natural color. You will need 4 pcs. long identical strips - for vertical elements, and 8 more pcs. smaller - for transverse inserts.
Create a chandelier frame. You need to take 2 pcs. long strips and place them parallel to each other, 2 pcs. short slats are placed at the ends, perpendicular to the long slats. With the help of a staple gun, the strips are stapled together. It turned out one facet of the future frame. You will need to perform the same element again.
Then, using 2 pcs. the remaining short strips prepared earlier, the rectangles are fastened together in the upper and lower parts. You can add a designer look to the entire structure by attaching a diagonal bar to the resulting frame inside each rectangle. To make the resulting frame look neater, before attaching the inner diagonal slats, their ends are cut at an angle of 45 degrees.

To fix the light bulb itself, you need to take a ready-made metal pendant for lighting. Metal parts are painted desired color. While the paint dries, you need to cut a hole in the frame to fix it to the factory hanger. The diameter of the hole should not be much larger than the diameter of the lamp suspension tube. But the inside must be secured with a washer or limiter. When the paint dries, you can fix the chandelier to the ceiling, fixing all the elements well. The last - the light bulb is screwed in.

The advantage of such products is that the wood is easy to work with, it is safe, because all parts that conduct electricity are hidden. A handmade chandelier can be adapted to any interior.

Chandelier-tangle

Making a spherical lamp (in the form of a ball), which can be used as a night light, if a low-power light bulb is provided.

Materials and tools:

1. Very thin wood veneer (the main element of the lamp).
2. Glue for wood (PVA can be used).
3. Clamps.
4. Electric holder for a low-power light bulb.
6. Pencil.
6. Scissors or stationery knife.

Stages of work - blanks, fastening, connection

If there are no ready-made veneer strips, then you can cut them from thin plywood or thick cardboard. The strips can be marked with a pencil or just cut out, as they don't have to be the same. All designs are welcome.

Pasting blanks.

In a circle of a certain diameter, strips are folded, gluing them at the points of contact. For a good gluing effect, the joints are fixed with stationery clips (binders). In the process of such twisting and gluing, inserting veneered hoops of different diameters inside each other, a spherical structure is obtained.

Cartridge mount.

From a piece of plywood you need to cut a square - a limiter. In the center of the square, a hole is cut with a diameter the same as the electric cartridge, which must be threaded inside the cut out square until it stops. The inner part of the cartridge is fixed on the reverse side of the square with a cartridge clamp. A wire with a fixed holder for a light bulb is pulled through a model of a chandelier wound from veneer until it stops with a plywood limiter.

Connection.

The wire is pulled out of the chandelier, taking into account how it will hang.

Then the light bulb is screwed in, gently pushing the strips apart and then returning them to their place. All fasteners are checked, and now you can turn on the finished chandelier in the network.

Loft lamp design

The simplicity of details is a distinctive feature of the loft style. It is quite easy to do the design of a lamp with your own hands - a sconce made of wood in this design.

You will need materials and tools:

1. Wooden bracket for mounting the lamp.
2. Electric cartridge, plug and light bulb.
3. Textile wire.
4. Spray paint for wood.

You can make a wooden bracket yourself, or you can buy a ready-made one. Drill holes in the right places through which the wire will be threaded and with which the lamp itself will be attached to the wall. The next step is painting the bracket. In accordance with the chosen design of the color palette, the wooden blank is painted.

After each layer of applied paint, you need to allow time to dry.

A wire is threaded through the hole, which is wrapped in a beautiful loop around the bracket. An electric cartridge with a light bulb is attached to the top of the wire. An electrical plug is attached to the other end of the wire. The lamp is ready.

Veneer Chandelier

This unique flexible veneer pendant will brighten up your dining room or bedroom, with rounded shapes and neutral colors to complement any interior design.

Would need:

elastic plywood sheet (the length of the sheet determines the height of the chandelier frame + a small piece of plywood for attaching an electric cartridge);
2 pcs. wooden hoops (hoops can be of the same or different diameters);
stationery or building clips;
glue gun;
ruler;
pencil;
stationery or construction knife or large scissors.

Execution technology

We prepare tools and materials, and proceed to the master class.

Cutting strips of plywood for the frame of the chandelier.

With the help of a pencil and a ruler, parallel lines of the same length and 2 cm wide are drawn on the plywood - the borders of the strips of the future elements of the chandelier, which are then cut out with a clerical knife or strong scissors. You can diversify the design of the future chandelier by cutting strips of different widths. In addition to long strips, you need to cut 4 pieces. bands that are almost 2 times smaller than the main ones. The function of these short strips is to hold the structure of the chandelier together by holding the two wooden hoops together.

Making a limiter for an electric cartridge.

In order to get a limiter right size, you need to take the remaining piece of plywood that was prepared earlier, put a hoop on the top of the chandelier on it and trace the outer contour of the hoop along the plywood with a pencil. Then, using large scissors, a limiter is cut out. In the center of the limiter, you need to cut a hole with a diameter such as an electric cartridge. A limiter with a hole is glued to the top of the hoop of the chandelier layout.

Fixing the cut strips on wooden hoops.

First of all, 4 pieces are glued to the wooden hoops. short strips, strictly at 90 degrees to each other, to tighten the structure. The hoops should be exactly parallel to each other. For better adhesion, you need to use clamps. After the 4 main strips-holders are glued, the space between them should be evenly filled with the remaining long strips, gluing them in the same way, fastening them with clips on the upper and lower hoops.

Practicality score
Material preparation
What lamps to use

Original interior items made of wood bring comfort and coziness to the atmosphere. If you don’t surprise anyone with solid furniture, carvings on the shelves, then a floor lamp, chandelier or sconce made of branches or driftwood will definitely attract the attention of guests.

However, wooden products are not cheap, especially original ones. We offer to save money and create a lighting fixture with your own hands. In addition, this is a great way to implement bold ideas, while spending very little time. For the manufacture of lamps and sconces, you will need standard carpentry tools.

Practicality score

To understand how good a wooden lamp is, let's weigh the pros and cons of this unusual piece of decor.

Advantages:

The environmental friendliness of wood is an important advantage over polymers and other synthetic materials.
When heated and in its normal state, the tree emits aromatic substances from the resin - ether, which relaxes and heals.
Any forms are created from wood materials - the raw materials can be easily processed with carpentry tools.
An unusual option for interior decoration. Wooden chandeliers in homes and offices are rare.

Flaws:

Disadvantages are reduced by using different impregnations and appropriate timber preparation. Therefore, a wooden lamp can be called a useful accessory that will emphasize the style of the room and give it charm.

Material preparation

Lamps and sconces are made from any wood materials. Boards, branches, snags, plywood are used - the choice is determined by the idea. Nevertheless, no matter what the design for the lamp is made of, it is important to properly prepare the lumber:

The wood must be dry.
The blanks should be treated with complex impregnations with refractory and insecticidal, antiseptic components.
It is worth choosing solid lumber without traces of decay.

In addition to wood, lampshades, carpentry tools and glue (preferably epoxy) are prepared for the manufacture of lampshades.

What lamps to use

Since wood is a flammable material, you need to be careful with the choice of light source. It is better not to use an incandescent lamp for nightlights and lampshades - when burning, it heats up both the cartridge and the wood.

LED lamps and ribbons are suitable for such homemade products - they emit white light and do not heat surfaces, they are fireproof. Diode tapes are ideally combined with wood of any color and texture.

Master class: lamps from boards

There are countless ideas for making home lamps. We will tell you how to make a homemade chandelier - you can take it as a basis for creativity.

For manufacturing, you will need beams of any section, for example, 100 × 100 mm or less, depending on the desired dimensions of the finished product, as well as a mirror. We recommend that you make a drawing of the chandelier in advance, which will reflect the lengths of the sides and the area of \u200b\u200bthe mirror part (it must protrude beyond the inner perimeter in order to rely on the beams).

We make a blank from 4 bars of the same length.
Next, we form a “castle” - we cut out a rectangular cup for half the thickness. A cup cutter or jigsaw will help with this.
We assemble the structure and glue the parts together.
After that, we paint.
From the upper edge we stretch the wiring with a cartridge and fix it to the inside with brackets or small nails.
Attach a mirror on top. It will act as a reflector of light. We fix on the corners.
It remains to attach a suspension, for example, a chain.

The accessory is ready.

The video shows a version of the manufacture of such a lighting item, the principle of operation is the same:

More plank lighting ideas:

Lamps built into false beams. To make them, we connect 3 boards in a U-shape, wires and cartridges will hide in the resulting niche.

The wheel will create the effect of antiquity or a hunting lodge, a forest bungalow. We fix the electrician on the upper side of the wheel facing the ceiling.

Another interesting solution from the boards, see the video

Master class: lampshades and lamps made of plywood

Plywood is a lightweight material that can be easily processed. From it you can create a variety of products. For example, an unusual night lamp for a children's room or hall. It will look equally good on the terrace country house and in a city apartment.

Or like this:

For a night lamp made of plywood in the form of a house, take a universal scheme on which you can make any pattern!

Now let's start making:

We transfer the templates prepared for all 4 sides onto a plywood sheet of any thickness.
We send for cutting under an electric jigsaw (or a laser machine for the finest study of petals and small fragments). You can use manual, but with a complex pattern you will have to tinker.
Sand the cut edges with sandpaper.
Roofing works are carried out in the same way. We cut it to size, make a pattern and grind it.
We glue the workpieces together. In order for thin sheets to hold securely with each other, inside the house in the corners we install bars on which we glue the walls.
We start the cartridge and fix it on the desired side interior. The wire can be brought into the pattern or a separate hole can be made for it.
We fix the roof, we make the bottom. We glue all the details also on the corner bars.
We make a suspension or mount in a convenient way.

The house is ready. A homemade night light or chandelier can be simple with a simple ornament or designer with a complex idea, wall or table. We present a video master class on making a house from several sections.

A plywood lamp can be of any kind. The main thing in working with this material is the need to cut holes for the passage of light. More photos of nightlights and lampshades:

To assemble such a lampshade from plywood, you need to cut a groove lock on each blank. Then the connection of parts can be carried out without glue.

A wooden chandelier diffuses light throughout the room. Connection of details is carried out by decorative self-tapping screws.

Master class: lamps and chandeliers from branches

Branches are the most available material for creativity. You can collect them at any time in the park or in the square near the house and immediately start creating. The difference between branches and other wooden blanks is that they do not need to be dried. As long as they have moisture, they can be bent and created different forms. Over time, they will dry out and no longer straighten out.

Before harvesting twigs, you need to decide on the design of the lampshade or chandelier. Will it be weaving or tying thick sticks with a rope, will the tree be combined with other products - forging, metal frames etc. Here are some interesting ideas:

A master class will help to make such an accessory for the interior:

Generalized instructions for creating a ceiling lamp from branches:

It is easy to make a lampshade from branches; special skills are not required for this, as well as tools.

Master class: log lamp

An ordinary log and even a snag can act as a blank for a chandelier. The main thing is that the material is dried and neutralized from insects and microflora.

We give the workpiece the desired size.
In the places where the cartridges are inserted, we make holes of the same diameter as the hidden part of the electrical device.
We attach hangers.
Insert electrical.

The master class can be viewed in the video:

An unusually shaped snag or stick can be turned into a masterpiece by adding a simple lampshade to it:

Chandelier bottles

Combined lamps look non-standard, for example, a wooden base and glass bottles as shades.

Glass diffuses light and creates shades different color. To make such a plafond is simple:

In a wooden shield we form holes for bottles. The neck should fit tightly, so we select the diameter as accurately as possible.
We attach a suspension to the top of the boards. Chains look original, for which the structure can be hung from the ceiling.
Preparing bottles. In order for them to give off light, the bottom must be removed. This can be done by heating the glass with boiling water, then quickly transfer the bottle under a stream of cold water.
We insert the bottles into the holes in the board, we stretch the electrician through the neck.

The video shows the process of creating an interesting table lamp.

The topic of our article is wooden ceiling lamps. We will analyze the advantages and disadvantages of this material both from the point of view of design and from all other sides; we will find out where these lamps can be used, and where it is better to do with other materials.

Finally, we will learn how to make a wooden lamp with our own hands with little effort and time.

What is associated with the tree in the design of the room? First of all, with antiquity, with the Middle Ages. Over time, when people woke up to the singing of birds, and not the noise of cars outside the window; when men were courageous, women did not know the word "emancipation", they were punched in the face for meanness, and life was much simpler and clearer.

That is why wooden lamps most often have deliberately ancient forms. For example, chandeliers in the shape of a cart wheel are very popular.

After all, this is how real, let’s say, indoor lighting systems looked like several centuries ago: an old wheel on chains or ropes was hung from the ceiling, and candles were placed on it.

Why is it convenient to use a wheel with spokes as a stand?

Why did the ancestors stop at this form?

With a uniform placement of candles, it gave the same illumination to all parts of the room;
The spokes created a minimum of obstruction to light, in contrast to the solid rim.

Modern stylizations have the same advantages; of course, instead of wax candles or splinter lamps are used. Most often, of course, also in the form of a candle.

However, we digress. What are the advantages and disadvantages of wooden ceiling chandeliers?

Material Features

Advantages

Wood is not only environmentally friendly. Wood not only does not emit harmful substances; on the contrary, for a long time it saturates the air with aromatic resins, which facilitate breathing in asthma patients, relieve inflammation of the respiratory tract ...
But what can I say - you probably remember how easy it is to breathe in a recently cut down wooden house!
Wood is easy to work with which opens up a wide scope for creativity. If for the manufacture of a lamp made of plastic or chrome-plated metal, fixtures that are absent in a standard city apartment are needed, then wooden lamps for manufacturing require a minimum set of hand tools.

However, alas, not all the features of wood as a material for a lamp are as pleasant:

Flaws

The tree is still combustible material . Placing wooden elements close to outdated incandescent lamps is a bad idea in the extreme; a burnt contact in the lamp socket can also lead to a fire.

Wooden chandeliers are attacked by bloodthirsty bugs- woodworms, fungus and other evil spirits.

Please note: softwoods suffer from insects and rot to a much lesser extent.

In addition, for hardwoods, there are antiseptic impregnations, which at the same time reduce the combustibility of wood.

Wood is a hygroscopic material. It absorbs moisture from the air; when dried, it can change volume, deform and crack.
If we want our lamp to retain its appearance for a long time, we will have to provide it with a more or less constant temperature and humidity.

conclusions

The negative features of wood are not meant to discourage you from buying or making a wood lamp, not at all. Again, this is a wonderful, very beautiful and easy to process material.

However, it must be used wisely:

Wooden fixtures should be shaped so that all heating elements (cartridges and the lamps themselves) are as far away from the wooden structural elements as possible.
It is better that the lamps look up: then the upward flow of heated air will not cause deformation of the wood.
Lamps stand apart, the very style of manufacturing of which involves the use of natural cracks in dried wood. For example, a log hanging on chains with lamps looks great both dry and cracked.

For reasons fire safety it is undesirable to place wooden chandeliers under combustible ceiling elements.
Yes, the same log on chains will look amazing under an equally old-looking one; however, if it catches fire, the fire will spread very quickly.
Wooden lamps are perfect for a bedroom or living room.. But in the kitchen with its abundance of steam when cooking or in a damp bathroom, wood is out of place.
It cracks quickly; besides, raw wood is no longer a dielectric at all.

When the phase is shorted to the wooden elements of the lamp, it is quite possible to get an electric shock. If at this moment you hold on to a grounded pipe or bathtub, troubles can be very serious ...

Homemade

Do I need to say that a thing made by one's own hands pleases much more than a bought one? Yes, your lamp may not be as neatly made as the purchased one; but the joy of creativity is worth it for the sake of it to come to terms with the small flaws of the product.

In addition, you will know for sure that your lamp is made in one copy. Not a single guest, coming to you, will see exactly the same chandelier as at home. Homemade ceiling chandeliers are always exclusive.

coffee service

We will need:

Dry board from any wood. The texture of ash is very beautiful; oak can not be stained and varnished. But an ordinary pine, spruce or birch is also suitable.
Three translucent coffee cups and three saucers.
Three cartridges for a small base with mounts for them.
Three matching light bulbs. Preferably - LED: remember the fire safety recommendations outlined just above.
Three or six rubber pads. The quantity depends on the method of fastening the cartridges.
Meter - two two-core copper wires of minimum cross section. 0.75 mm is enough for the eyes.
A thin chain or twisted cord in order to hang the structure from, for example.
Four screws to a ring instead of a hat. It is for them that our lamp will be suspended.

In addition, you need to stock up on a drill with wood and tile drills, pliers and a screwdriver.

Let's get to work:

We process the planed board with sandpaper - at first coarse, then finer.
We drill three holes where the cartridges will be located.
If noble types of wood are used, then the processing of the board ends here. If the tree is simpler, we cover it with stain and after drying we varnish it twice.
Nitro-lacquer dries in the air in just a couple of hours, so you won’t have to wait long.
Then comes the most dangerous step: we need to drill holes in the coffee cups and saucers without breaking them.
We use only and exclusively a drill for glass and tiles. Great efforts are unacceptable; we drill slowly, without distortions. The key moment is when the tip of the drill goes through: a little more pressure on the drill at this point will crack the cup or saucer.

We cling to each cartridge of the wire. Until we fasten them together.
We screw the entire future lamp into a single whole. If our cartridges use platforms with holes for screws, we attract them to the board directly through the holes in the saucer and cup.
If there is a hollow threaded tube and a nut at the end of the cartridge, again we pass them through the cup, saucer and board. A rubber gasket is placed between metal and glass.
You can cut it yourself from an unnecessary bike or car camera; you can use a ready-made gasket of a suitable size from any plumbing repair kit.
We screw the screws with rings into the back of the board.
We connect the cartridges in parallel. You should not leave twists wrapped with electrical tape: we will carefully make even the side of the lamp that no one will see. Use a block to connect the wires.

The block is fixed on the back side of the board in any way - with a drop of glue or a screw. A piece of wire is clamped in it, which will be connected to the wiring.
We cling to the rings on the back of the chain or cords; their other end is attached to a hook in the ceiling. The wire is started along one of the chains. Light bulbs turn on.

Press the switch and enjoy.

As you understand, the forms that wood chandeliers can take are limited only by your imagination. Let's show some more original designs.

Sailboat made of driftwood and TV packaging

This original lamp is made of oddly shaped driftwood picked up in the forest. The author kindly posted a photo of his creation to the network.

The design, of course, is not a monument to fire safety. However, remember that LED lamps are extremely economical and practically do not heat up. If so, the risk of fire is reduced to nothing.

Chandelier from dry boards and rope

Here, two ready-made matte shades are used as light sources. The most simple and inexpensive. Everything else is the author's improvisation.

What is most striking is not that the lamp is made by hand: as you can see, there is nothing structurally complex in it. It is surprising that the author of the work managed to see beauty in such a seemingly worthless thing as an old board. And show this beauty to others.

Please note: in this design, it is also worth using only and exclusively energy-saving or LED lamps.

Incandescent lamps, especially high wattages, will pose a very real fire hazard.

Beam with pots

And such ceiling lights are not mass-produced. Looks very original. To drill the bottoms of the pots, you also need to use only and exclusively tile drills. In addition, incandescent lamps should not be used here either. Even the weak ones.

Hollowed out log with soffits

Another living nightmare of a fire inspector. However, here, too, the use of light sources with minimal heat release reduces the risk of fire to nothing.

Despite the exaggeratedly simple appearance of the lamp, it is difficult to call it made in five minutes on the knee: it was certainly difficult to hollow out a log inside.

Conclusion

If you like the wooden ceiling lights described and shown, great. Even better, if you have your own, original ideas. As you can see, they can be the most unexpected. Good luck in creativity!