Advertising on the portal

Connecting the faucet in the bathroom. How to install a faucet in the bathroom so that you do not have to do repairs at the neighbors

One of the most important attributes of any bathroom is the faucet. This device provides mixing of hot and cold water, which allows you to adjust the required supply temperature for bathing, washing or other needs. Like other plumbing fixtures, this appliance is subject to wear and long-term operation it may need to be replaced. To understand how to properly install a faucet in the bathroom, you need to watch a video for a specific model, only in this way you can catch all the subtleties of installation.

As a rule, the replacement of the mixer is carried out during a major overhaul or in the event of a breakdown of the device. In the modern plumbing market, the consumer is offered a huge range of devices that differ in appearance, functions and, of course, price. Thus, you can choose the ideal model that emphasizes the dignity of the interior, and satisfy the material possibilities.

  1. Features of choosing a bathroom faucet.
  2. Dismantling the old device.
  3. The subtleties of the installation of the mixer.
  4. Wall and stand mounting.

Nowadays, it is possible to independently choose the device of the required design. In addition, its installation can be carried out by almost anyone without the involvement of a specialist. In this case, it is necessary to take into account a number of rules and subtleties that will ensure the reliability of the system.

Choosing a bathroom faucet Video

The selection process does not need to be rushed. Do not rely only on attractive appearance design, as this does not guarantee the quality and trouble-free operation during operation. The following criteria must be taken into account:

  • One of the important parameters is the weight of the product. Light models indicate that not the highest quality materials were used in their manufacture, so the service life will be short. good manufacturer does not save on metal. As a rule, relatively big weight speaks of high quality.
  • Budget mixers are systems made of silumin, which perform well in work. Faucets made of an alloy of aluminum and silicon are less durable.
  • The highest quality mixers are made from brass. They are easy to install, operate and maintain. In addition, breaking them is not so easy.
  • Particular attention must be paid technical specifications. It must be understood that there are models for mounting on the side of the bathroom and wall-mounted devices. Not the last place in the choice is the length of the spout and the size of the hose.
  • It is better to give preference to well-known brands that value their reputation in the market.
  • Before buying, you need to check all the components, which should include: a gander, a watering can or a shower hose, decorative platforms, eccentrics, gaskets and detailed instructions.
After selecting the required model, you can proceed to dismantle the non-working device.

Dismantling the old mixer. Video

To make the replacement of devices as easy and convenient as possible, it is initially necessary to prepare everything necessary tools and consumables. This list includes:

  • Adjustable wrench No. 1.
  • A set of open-end wrenches, among which the most needed are numbers 17 and 14.
  • Phillips and flat screwdriver.
  • As a sealant, you will need to use flax tow, sealing paste or telephone tape.

Insulating materials will be used already during the installation of the new faucet.

As for the process of removing the old device, it is carried out in the following sequence:

  • At the time of work, it is necessary to turn off the water supply to the riser. After that, you need to open the tap and let the water drain;
  • The device is held on eccentrics, which can be used to install a new mixer;
  • Initially, it is necessary to unscrew the union nuts that hold the system. If there are problems with unscrewing, it is enough to tap the nuts or heat the thread;
  • In the event of a breakdown of the eccentrics, you need to install new ones using a fum tape. They are screwed in clockwise to the stop;
  • When removing the old faucet, you need to be extremely careful not to damage the threads on the fittings.

These manipulations will not require much time, and immediately after that you can start installing a new device.

The subtleties of installing a new mixer I

Installation of a new device is often associated with a complete replacement of all communication pipes. Because of this, you need to pay attention to a number of important points:

  • Particular attention must be paid to the distance between the fittings, which must correspond exactly to the eccentrics. As a rule, it is 150 millimeters;
  • It is important to remember that the pipe hot water located on the left, and with cold - on the right. It is also necessary to endure optimal distance from the floor, which should be 60-80 centimeters;
  • For accurate mounting of eccentrics, the exact level of position must be maintained without distortion;
  • If the kit includes decorative reflectors, then they must be put on the eccentrics;
  • Before you start screwing, you need to lay special gaskets. In order not to scratch the nuts, under the adjustable wrench it is necessary to put soft tissue. Also, do not overdo it with tightening, so as not to damage the gaskets;
  • After that, the gander is installed, which is also fastened with nuts;
  • Gaskets must also be installed before connecting the hoses;
  • At the last stage, a place for mounting the watering can holder is selected. To do this, you need to drill holes and fix the bracket.

Mounting the faucet on the wall and stand

Often overhaul requires a small redevelopment and transfer of plumbing fixtures to other places. Modern metal-plastic and polypropylene pipes allow this to be done without any problems. Accordingly, when installing the mixer, there will be no special problems, the main thing is to carefully make the wiring.

  • When installing a flush-mounted water supply, when installing a washbasin or bathtub faucet, it is necessary to comply with established standards. First of all, the height from the floor must be at least 120 centimeters, and the socket outlets are mounted no closer than 15 centimeters one from one. The height above the bath should be within 30 centimeters.
  • After installing and centering the fittings, you can perform a standard mixer installation according to the diagram above.
With a complete replacement of the bathroom, it is possible to choose the place of attachment or install it directly into the body. Modern acrylic models are often equipped with a prepared place for the mixer.

Another popular option is to install on a separate rack, while there must be a sufficiently large space of the room itself. In most cases, the racks are made massive with composite materials or natural stone which requires a lot of space.

Important points when installing a faucet in the bathroom

When installing inexpensive Chinese-made models, you must be especially careful and avoid pinching. Before supplying water, make sure that all elements fit snugly. It should be noted that Soviet-made mixers can also be used, however, it must be remembered that not all imported hoses are suitable for them. Nevertheless, this problem can be solved with the help of adapters.

As a result, we can conclude that everyone can correctly install the faucet in the bathroom, just watch the corresponding video and familiarize yourself with the basic requirements. A competent choice of the device model and the phased implementation of all manipulations will save on plumbing services and ensure a long service life of the system.

During repairs, many often wonder how to install a faucet in the bathroom without the involvement of paid plumbers. This may seem like a fairly easy task, but there are a large number of nuances that should be considered during installation.

With insufficient experience in working with communications, it is likely that installing a faucet in the bathroom will turn into big problems for residents - the risk of leaks in this case increases many times over. Therefore, starting such events, you should be completely confident in your abilities - or still turn to plumbers for help.

If installing a faucet in the bathroom with your own hands is a matter of principle, then you need to carefully prepare for it - purchase a quality product, as well as prepare everything necessary equipment and consumables for installation.

Generally, self-installation the purchased faucet in the bathroom allows you to save on the cost of calling paid plumbers, and also makes it possible to personally control the entire procedure.

How can I install a faucet in the bathroom?

Installing a faucet in the bathroom with your own hands begins with the purchase of new plumbing. Bathroom faucets can vary in the length of the gooseneck, the presence or absence of a shower head, the opening mechanism (lever mixers or classic ones) and many other characteristics. The question of which crane to choose, it is better to first check with a specialist or seek advice from the seller - he will advise the best manufacturer and help you choose a model on a budget.

  • open installation;
  • concealed installation.

The first type of mixers is recommended for novice plumbers. It is much easier to mount such a faucet on the wall due to the fact that connection to the water supply system does not require additional wall chasing operations or complex calculations when installing supply pipes.

Installing a concealed faucet in the bathroom by yourself is more challenging task, but also possible. the main problem when working with such cranes, it is more difficult for the master to gain access to communications.

Ultimately, how to connect the mixer - hiding the pipes or not - is decided by the owners of the home based on their own preferences. The main thing at the same time is to adequately assess your plumbing skills and not take on overwhelming tasks.

Faucet installation methods

However, how can you install a faucet in the bathroom? There are several basic ways to do this:

  • put the faucet on the wall;
  • build a separate rack;
  • to mount in the body of the bath.

The most popular and in demand is the connection of a flush-mounted faucet in the bathroom to the wall. This type of installation allows you to hide the pipes that spoil the appearance of the room from prying eyes as much as possible, and also does not limit the location of the crane in any way. You can install the faucet in the bathroom both along the width of the tank and along the bathtub at any comfortable height.

You can also build a separate stand for the mixer, lining it with ceramics and hiding it inside the pipe. This is a rather laborious method, but with its help you can think over an attractive interior of the room. However, for similar structures Needs extra space that most bathrooms don't have. A faucet on a separate stand is more suitable for spacious rooms.

Installing the mixer on board the bath is possible if the design of the latter has the appropriate connectors in the body. This method involves the supply of special flexible hoses instead of polypropylene pipes and requires the prior purchase of appropriate plumbing.

You can’t put a faucet in a regular classic bath in this way. Flexible piping is very convenient, as it allows you to avoid complex piping.

In general, there are no special restrictions on the installation of mixers. They can be mounted directly above the bathtub or between it and the sink. The approximate height also varies depending on the wishes of the owners - of course, within reasonable limits.

Faucet set and consumables

To understand how to properly install the purchased faucet in the bathroom, you should first figure out what kind of product it is.

In stores now you can find wide choose faucets both open and concealed installation. However, what is included in the basic set when purchasing a mixer and are additional costs required for any components? In order not to visit the point retail sales again, it is better to decide in advance what the purchase is.

The standard equipment for a bathroom faucet includes:

  • the mixer itself;
  • eccentrics;
  • a set of gaskets;
  • decorative cups;
  • shower head.

Depending on the type of mixer (with built-in tap or long swivel tap), it can also be equipped with a separate gooseneck of various lengths.

Eccentrics are designed to attach the faucet to the wall. They are also needed to level it. With their installation, the process of installing bathroom faucets begins, so it is extremely important that they are made of quality materials. The durability of the crane depends on this.

It often happens that the standard gaskets included in the set of bath faucets are not thick enough and subsequently become the cause of leaks after installation. To prevent this from happening, you should also purchase a spare set at the time of purchase in the store. Gaskets 3-4 mm thick and ¾ in diameter are ideal for installation - they will provide reliable sealing.

As Supplies you should also purchase tow - it is wound when installing the mixer in the place where the pipes are connected to the eccentrics and provides additional insulation.

The main steps for installing a bathroom faucet

To mount a bath faucet, regardless of the installation method, it is necessary to carefully consider the entire process and prepare for work. As in any other business, haste here can only hurt.

For installation, the master will need the following materials and tools:

  • the bath faucet itself;
  • adjustable wrench up to 17 mm;
  • gas key No. 1;
  • pliers;
  • linen tow.

You can have your own tool, but if you don’t plan to do plumbing work in the future, you can take it from friends - nevertheless, the cost of high-quality keys may even exceed the price of the mixer itself.

The gas key is used to work with those elements of the mixer that do not have a front cover and, therefore, do not require careful handling - that is, with eccentrics. But the nuts already on the tap itself should be carefully tightened with an adjustable wrench so as not to damage the enamel.

So how do you install a faucet in your bathroom without risking flooding yourself and your neighbors? To do this, you need to do a few simple manipulations:

  • Shut off the water supply.

For this in plumbing system any house or apartment has a special valve. In old dwellings, there is often no cover on it, then to turn off the water supply, the rotary mechanism should be clamped with pliers. If the state of communications leaves much to be desired, it is more rational to invite a plumber and not to produce self-assembly. After the procedure, be sure to check the faucet for leaks.

  • Dismantle the old crane and eccentrics.

First you need to remove the valve itself by unscrewing the nuts. Then comes the turn of the eccentrics - if the mixer was flush-mounted, it is quite difficult to unscrew them with a key. This should be done counterclockwise. If the condition of the old eccentrics allows, they can be left in place - this will significantly reduce the installation time of the valve.

  • If the old eccentrics are no longer suitable for use, new ones should be installed.

The mixer comes with two pieces. They have 2 threads on opposite sides, marked with ½ and ¾ diameter marks. For connection to the water supply, the side with the smaller diameter is required. The passed pipe has a polypropylene adapter, into which the eccentric must be carefully screwed clockwise (tow should be wound on the thread beforehand). Its correct position in the end is a bend up.

  • Assemble mixer.

Many inexperienced self-taught masters are wondering how to assemble a bathroom faucet, and is it difficult. In fact, the process takes no more than 5-7 minutes. The mixer must be assembled using an adjustable wrench. All parts of the product are easily connected to each other and fixed with nuts - including the shower head - however, it is better to screw it on after installing the faucet.

  • Adjust the eccentrics to level the crane horizontally.

To do this, we slightly wind the assembled mixer onto one of them, just to estimate its future position. Then, using the key, we adjust both eccentrics so that the crane eventually takes a horizontal position. When you can find the right position, you need to twist it and attach decorative cups to the eccentrics.

  • Install mixer.

It should be wound using insulating gaskets. This must be done carefully - it is enough to screw the mixer with your hands as far as possible, and then half a turn with a key. Otherwise, you can overtighten the nuts, which is fraught with stripped threads or damage to the gaskets. Both will certainly lead to leaks.

When installing a faucet, you can wrap tow on the threads of the eccentrics for additional waterproofing, but this is not welcomed by all plumbers - some believe that this becomes only an additional factor contributing to leakage.

After that, we can assume that the installation of the purchased faucet in the bathroom with your own hands has come to an end. It remains only to resume the water supply and try to use it for the first time. The above method is applicable when connecting mixers in any way - on the wall, in a special box or on the bath body.

Installing a faucet in the bathroom is a responsible task, having coped with it, you can save a lot on the services of paid specialists. Meanwhile, connecting any faucet in the bathroom requires some experience with plumbing. If there is none, and there is no way to use the advice of a knowledgeable person when working, it is better to refuse

A properly installed faucet will serve faithfully long years and 100% perform their functions to ensure the supply of water to the bathroom.

To make showering as comfortable as possible, and hot water mixed with cold, providing you with the optimal bathing liquid in terms of temperature, you need a mixer. Faucet installation can be carried out with the help of a team of specialists, but you can also do it yourself, since this is not such a complicated procedure.

Today we will tell you what it is to install a faucet in a bath with your own hands, how to install a faucet correctly, you will get acquainted with useful tips to install this unit with your own hands and watch the training video.

How to choose a faucet in the bath

Faucet installation cannot be completed without first purchasing a new faucet. You should take its purchase very seriously, since all subsequent operation of the mixer depends on its quality, so do not save on buying a bath faucet.

The installation should not be carried out in a hurry, otherwise there will be no sense from the work either, and very soon everything may become unusable.

Before proceeding with the installation of the mixer, its should be chosen correctly. When buying, pay attention to the following:

  • The mass of the structure, because the quality of the model directly depends on the weight. If the material is of high quality and durable, it will not be light, since the thickness of the metal is a guarantee of quality.
  • Construction material. Most often, either brass or silumin is used. The latter is cheap and light, it consists of an aluminum and silicon alloy and is not strong enough, sometimes the mixer handle made of such material can come off or the clamps fall off. But brass devices are more expensive, but the viscosity of the alloys on them is higher, so the device will not break.
  • Technical specifications. If you change the faucet yourself, carefully study its characteristics so that they match the placement in your bathroom.

Faucet height above bath

There is a recommendation that says that the optimal height of the mixer in relation to the bath is 20 centimeters. But this is all conditional and the real height may differ slightly from this indicator. with such advice mixer installation:

The sequence of work on installing the mixer

Before installing a new faucet, you must first remove the old one. For this and subsequent work, you will need the following tools:

  • hexagons:
  • large pliers;
  • Phillips and flat screwdriver;
  • gas and open-end wrenches;
  • wrenches;
  • FUM tape.

How to remove an old mixer with your own hands

Ridding a bathtub of an old faucet yourself will not be a difficult task, but before you do it, do not forget shut off the water supply.

It is necessary not only to block the main highway, but also hot water, which in some apartments and houses is supplied through a gas column or boiler. Replacement is made in the bathroom itself, where the walls are tiled with tiles.

First drain the water from the faucet and then from the wall unscrew it, but very carefully so as not to damage the threads on the fitting, which are located on the wall itself. If it is damaged, then you will have to do a major overhaul in the room in order to change the fitting.

After you remove the old faucet, carefully clean the fitting in the wall to remove the remnants of paint and old winding from there.

How to assemble a collapsible structure with your own hands

Most faucets are sold disassembled, so they must be assembled before installation. When purchasing a design, please note that all its details are present in the box:

  • Shower Heads;
  • gander;
  • shower hose;
  • main block;
  • ceiling lamps are decorative;
  • rubber gaskets;
  • eccentrics.

Each item must be packed separately in small bags - fabric or cellophane. Also, be sure to check the quality of the fastening eccentrics, in particular, for the integrity of their threads.

To assemble the structure attach to main unit gander, as well as a hose with a watering can, such work should not cause difficulties. However, do not use wrenches or tighten the nuts when assembling.

Steps for installing a faucet in the bathroom

When the model is assembled, you can begin to install it. It includes the following steps:

How to install a faucet on a new wall

Above, we considered the case of installing a mixer, subject to the dismantling of the old structure, and now let's look at the installation process in a new house or other room where such a structure is installed for the first time.

So, you need to change pipes, tile the walls, and install fittings. To do this, you need make simple calculations:

  1. Measure the distance between the centers of the fittings, which is 150 mm.
  2. The centers must be on the same parallel.
  3. The end point must be flush with the wall.
  4. The fittings are located at the same level, and their height must be acceptable for the installation of the structure.

Fittings set only after the plumbing pipes were laid out and a plasterboard crate or beacons for plaster were installed.

If you will use drywall, then the soldering of the fitting must be done in such a way that it protrudes from the crate by about 25 mm, and the exit point must be firmly fixed with profiles or mounting brackets.

Given the planning of plaster on the walls, the protrusion should be calculated depending on the distance from the lighthouse to the tiled plane adjacent to the wall. As a rule, the height of the protrusion is about 17 mm.

Subsequent work on the installation of the mixer does not differ from the case with the dismantling of the old structure and the use of the old fitting.

As mentioned earlier, when doing this work can't rush things, otherwise you run the risk of having serious problems with the application of the finished design after it is put into operation.

Therefore, do not forget that the eccentrics first twist without seal, and only then, when you have checked the correctness of your actions, they are installed in a working state.

Before starting work, do not forget to cover the bath and washbasin with a sink with rags, adhesive tape, film or corrugated cardboard. This is necessary in order to plumbing was protected from chips, falling structures and heavy accessories. Don't let a faucet replacement cost you a bathtub replacement.

As you can see, it’s not so difficult to install a faucet in the bathroom on your own, if you do it all requirements and recommendations. If everything is done correctly, it will serve you as long as possible and you will not have problems during its operation.

FROM kneader, and therefore a mixer, because, mixing hot and cold water, the output gets warm. Install faucet– it’s not a complicated matter, and it doesn’t always make sense to pay money to an invited plumber for this. But before you install a mixer, you need to choose it, and here, alas, in the vast majority of cases, the ratio between quality and price is the most direct - the more expensive the mixer, the better it is. This is about quality. But besides this, the question of how to install a mixer can refer to its most diverse types. For example, install a faucet in the bathroom or in the kitchen.

Content
1.
2.
2.1
2.2
3.

Mixer price and quality

There are two points in the task of installing a mixer, the first is that mixers of the middle price group, the most common among the general population, in the overwhelming majority of cases are not provided with installation instructions, however, we will tell you how to install a mixer of this class below.

The other side of the issue is expensive elite sanitary ware, which is installed so individually that it makes no sense to talk about installing a mixer worth 10,000 rubles or more, since they are made in relatively small batches and our description may not correspond to the particular model you purchased. And even a small discrepancy carries the risk of damage to expensive equipment. But this is not a problem, because such mixers are just equipped with very accurate installation diagrams and instructions (if this is not the case, they are trying to foist a fake on you under the guise of an elite device). In addition, having learned how to install a typical mixer, you can handle the expensive one, except by fiddling a little longer.

Do-it-yourself mixer installation

Consider installing a faucet in a wall-mounted bathroom, as this is the most troublesome type of installation.

Necessary tools and materials for installing the mixer

To assemble the mixer, subsequent installation, as well as to remove the old one, if necessary, you tools required- a pair of adjustable wrenches with a working width of at least 32 mm. Also may be useful:

Gas key number two (especially if you have to remove the old mixer),
big pliers,
hexagons for 6; 8; 10 and 12
Phillips and flat head screwdrivers.

To screw in eccentric adapters, you may need a regular 12 by 14 open-end wrench.

There are 3 types of faucets installed in the bathroom: for the sink, bathtub and shower. Depending on the structure and type of mixer, the features of their installation should be taken into account so that the system functions correctly and for a long time. In the article, we will consider the question of how to install a faucet in the bathroom with your own hands.

Varieties of mixers

Modern mixers differ in color, material of manufacture, mechanism and price. The most reliable devices are made from a mixture of copper and zinc (alloys). It is the most durable and non-corrosive metal. decorative coating this material is chrome-plated, to give the product a presentable appearance and commercial appeal.

Chinese counterparts are made of silumin, a cheaper material consisting of an alloy of aluminum and silicon. When working with high pressure or high temperature, they are subject to destruction.

You can distinguish the original from the fake by weight - high-quality mixers are always heavier. But here you can be wrong. Manufacturers of cheap faucets go for the trick of putting a weight ball inside that does not hinder operation. Another surest way to determine quality is to find the brand of the manufacturer. Only expensive companies producing this product have engraving or special printing.

Variety by purpose

For bathroom

These are the most complex and massive structures. They can go immediately with a shower complex, they can be separate, without hoses and watering cans. According to the type of fastening are divided into:

  • Attached to the wall;
  • Mounted on a side or stand.

Soviet faucets were often attached to the wall or to separate pipes with hot and cold water coming from under the bathroom. When replacing such a crane, you have to change the design, because. modern models may not be suitable in size and thread for the old installation.

For shower

Can be different size as independent device, and in conjunction with a bathroom faucet. A separate shower is installed or attached to the wall in the bathroom.

for sink

A sink faucet can be simple, with a small watering can that practically does not stand out from the base and one control knob. For deep, large sinks, a faucet with a longer shower head is used, as in the kitchen.

Modern mixers can be controlled with one lever (single lever) or have 2 separate valves for cold and hot water(double valve). Sensor mixers stand apart. They are a class above, and accordingly, more expensive than others.

Installation of a wall-mounted mixer

They are installed at a height of more than 30 cm from the level of the bathroom with a width between fittings of about 150 mm. An error of 5 mm is given. For the purpose of sealing in the thread area, it is strongly not recommended to use flax. For its high-quality service, it is necessary to lubricate with special paint and tighten the thread strongly, which is detrimental to some mixers (especially not of high quality). If the threads are stripped or the connecting mechanism is cracked, it may not be possible to replace it separately from the mixer. It is more profitable and more practical to use FUM tape.

During installation, the pipes must have a thread of a typical connection, if this is not the case, you will have to purchase and install connection couplings. This will lead to the following inconveniences:

  • Additional work, purchase of an extra part;
  • Not aesthetic appearance - the mixer will stick out of the wall;
  • An additional connection increases the risk of breakage and leakage.

Before starting the installation, it is better to immediately clean the tap by opening the water for a few seconds. If this is not done, a possible blockage threatens to dismantle the entire structure.

You need to check the diameter of the eccentrics immediately upon purchase, they are threaded on one side ½ in diameter and ¾ on the other. The amount of sealing tape is checked by trial. If the eccentrics wobble a lot, more will be needed.

When installing, it is important that the length of the thread in the couplings is at least 10 mm. With a smaller thread, poor quality and unreliable installation is possible. When the desired thickness of the seal (tape) is selected, you can tighten the eccentrics and try on the nuts. Before tightening the nuts, put the gaskets that come with the mixer into them.

After the eccentrics are screwed in, you need to attach the mixer and carefully tighten the nuts onto the threads. They should be easy to make money, manually. In this case, it is important to monitor the evenness of the installation of the mixer. A correctly screwed device should be fixed straight. The level can be checked using the building level. After accurate installation, the nuts can be tightened with a wrench. You can’t overdo it in this, because. Nuts can burst from strong pressure.

  • Tip - in order not to damage the nuts, you need to wrap the key with molar tape before clamping.

To check the tightness of the connections, turn on the water and place a sheet of paper under the faucet. Small leaks may not be noticeable when the water is turned on normally, and thus even small droplets of water will be immediately visible.\

At the final stage, you need to assemble a watering can, a hose and a spout (gander) of the mixer. The whole assembly will be inconvenient if assembled before mounting to the wall.

Mounting the faucet on the sink

Onboard mixers are convenient and practical. and have pre-drilled holes for such devices. In enameled and acrylic, you will have to cut it out yourself.

If the sink or bath faucet does not have a shower directly connected to the body of the device, then one hole is needed, for a watering can you will have to purchase or cut out a sink with 2 holes.

  • Tip - if a similar mixer is installed on board the bathroom, take care of it correct installation before the bathroom is completely installed, to hide the wires and hoses.

From the bottom of the mixer, it is necessary to put on a gasket and a special washer, which is first twisted by hand, and then tightened with a key for half a turn to strengthen it.

After that, the water pipes are connected to the special mixer holes. Tightness is also checked with a sheet of paper.

How to dismantle the mixer

In addition to proper installation, the correct dismantling of the old device is important. It depends on whether the installation of a new mixer will be easy. Before dismantling, it is better to immediately prepare all the necessary tools.

  • Remove all scale and oxidized surface from the thread;
  • In case of jamming when unscrewing the nuts, take your time and make half a turn in the direction of twisting, and then only in the opposite direction. This helps to clean the threads and prevents the destruction of the nut;
  • To properly dismantle the old mixer, you need to wet all the connections with a product containing hydrochloric acid. Toilet fluid or WD-40, which is popular with motorists, is well suited;
  • If the old eccentrics are firmly installed and not outwardly destroyed, you should not touch and change them for new ones. These old-style parts are much stronger than modern ones;

It happens that during parsing, old eccentrics break off and one part remains in the thread. This may lead to the need to disassemble the entire structure, up to the slotting of the wall. To avoid such problems, you can make a special device that extracts pieces from the thread.

For its manufacture, sheet steel with a thickness of up to 2 mm is suitable. The inner diameter of the eccentrics is about 15 mm. Cut a piece of 3-5 cm with the same diameter and sharpen one end into a triangle. Ideally, you need to simultaneously drive the device into the thread and drag it with a key. Well, if this is done with the help of an assistant.

  • If hard water flows from the taps in the house, it is not recommended to purchase taps with plastic cartridges and swivel antennae. The potassium contained in such water leads to the accumulation of plaque, which gradually paralyzes the operation of the tap;
  • In case of low or excessive water pressure, it is better to purchase a mixer with a rotary device or touch control. Such taps themselves regulate the pressure and save water;
  • In the event of a minor breakdown, repair the mixer immediately, due to frequent use, it will begin to deteriorate quickly and may lead to leaks;
  • If even after replacing the faucet, the pressure remains weak, the problem is a clogged pipe.

Conclusion

To choose and install the mixer correctly, you need to carefully disassemble and examine it. Accurate knowledge of the principles of operation and the composition of the device can help in further repairs. If you purchase an expensive, high-quality mixer, check for weight not only it, but also the eccentrics. Often they are of poor quality, and they do not withstand the weight of the crane.

Modern options for mixers offered to the consumer are full of variety. It can be stylized antique or any modern design cranes, figures of animals, compositions reminiscent of robotics and much more. An attractive appearance can often be found in expensive equipment, cheaper options are simple. The handles are made of the same material as the device itself, less often of plastic. Be sure to keep receipts after purchase. If during installation the faucet is damaged due to reasons beyond your control (poor quality) or does not fit the type of attachment, you will have 2 weeks to return the product to the store.

An important role is played by the condition of pipes and drains. If they are in a neglected state, they do not pass water well, regardless of the quality of the new mixer, there will be problems with the flow or discharge of water. It is more reliable to make a replacement by inviting a specialist in this field, but after studying the instructions in detail, you can replace the faucet yourself. The main thing is to carefully approach this issue, do not overdo it in tightening the nuts and act carefully when dismantling the old crane (if any).