Removal of plaster from wall surfaces. Beating plaster
The surface of the plaster may crack and crumble over time. different reasons. This is both natural wear and tear, and shrinkage of the house, and mechanical impact. Due to re-staining, so-called nabel can also appear on the plaster. It causes the new paint to crack and peel off.
With such problems, you need to beat off the plaster. Masters can, if necessary, remove the old white, repair cracks, crevices and cover up broken parts. Dismantling is also used during major repairs, when the coating needs to be completely changed. It is important that specialists before carrying out work find the cause that led to the deterioration of the old plaster.
To whom to entrust the plastering
If you do not have the relevant knowledge and experience, it is better not to try to beat off the plaster yourself. At first glance, this job may seem simple. But in fact, it also requires the presence of special tools, the ability to competently prepare the walls for applying new material.
The cost of modern tools is quite high, so it will be more economical to hire professional craftsmen to do a one-time job. In addition, only experienced workers will be able to understand what led to the formation of defects, and recommend ways to deal with them in the future.
Keep in mind that demolition work is always associated with a lot of harmful dust and debris. A profile company will offer you a garbage disposal service and send craftsmen with all the necessary tools. With this help, dismantling will be very fast, the garbage will be eliminated, and you will not need to worry.
How to beat off the plaster?
Before beating, experts check how durable the old plaster is. To determine this, they use a hammer and a plaster spatula. If deaf sounds are heard during impacts, it means that the plaster does not leave. If the sounds are sonorous, then the coating may soon collapse or crack. Therefore, it must be removed.
After the diagnosis, the masters beat off the plaster with the help of special tools, and then clean it off. When the work is completed, you can remove the wallpaper and apply a new coating to the prepared walls. The cost of the beating depends on the volume and complexity of the work.
| Prices for dismantling plaster | ||
|---|---|---|
| Type of work | unit of measurement | Cost, rub.) |
| Beating plaster | sq.m. | 100 |
Dismantling of plaster
Almost any repair in the room cannot be imagined without such a stage as the dismantling of the plaster. Indeed, over time, even on a perfectly plastered surface, defects appear in the form of cracks and broken parts. This process is caused by building settlement, improper operation and other factors.
In addition, white spots may appear on the plaster - thick layers of paint that form after painting the surface in several layers with lime or glue paint. Cracks may also appear in place of the whites after subsequent staining.
In order to eliminate all the listed surface defects, it is necessary:
- to restore broken parts;
- close the gaps;
- remove all whites;
- beat off the cracked parts.
If carried out overhaul premises, it is necessary to completely dismantle the plaster from the walls, and if necessary, the ceiling.
Before performing these works, it is necessary to determine the causes of defects on the surface so that the plaster does not have to be restored again and again.
Professional approach to plastering
As practice shows, to dismantle decorative plaster without some experience and the use of specialized equipment and tools is quite difficult. Of course, you can beat off the plaster on your own by buying everything you need. But in this case, there is a high probability of damaging the walls even more, and then all subsequent construction works will increase significantly in price. In addition, it is not entirely rational to purchase a set of professional tools only for plastering, the cost of such a set is quite high. In addition, do not forget that only a specialist can determine the exact cause of the appearance of defects on the surface. When dismantling the plaster, a lot of dust and construction debris appears, which will need to be removed.
All these problems can be avoided if you entrust the beating to professionals. Moreover, the price in St. Petersburg of dismantling old plaster is not so high. A master with a set of necessary tools will be able to make a beating much faster without additional damage to the wall. Also, experts will be able to remove all construction debris in a timely manner.
Beat sequence
- First, the surface of the wall is tapped with a plaster spatula or hammer. Thus, the strength of the old plaster is determined. A dull sound upon impact indicates a good adhesion between the plaster and the wall. Sections of the wall where a ringing sound is heard must be dismantled.
- After determining the defective parts, the plaster is dismantled, the prices for this preparatory stage before the repair largely depend on the tools used.
- Now you need to remove the nabel.
- Next, another inspection of the walls is carried out for the final removal of the plaster.
- Cleaning and removal of construction debris.
Our company guarantees high-quality performance of all works related to plastering. We offer professional dismantling of plaster, the price per m2 of which is determined based on the total amount of work. Our specialists can also perform
Scope of work: Tapping the surface. Removal of loose plaster.
Meter: 100 m 2 broken surface
| Resource ID | Resource name | Unit of measurement | on brick and concrete | |||
| walls and ceilings | pillars, columns and pilasters | |||||
| up to 5 | over 5 | up to 5 | over 5 | |||
| 11-50-1 | 11-50-2 | 11-50-3 | 11-50-4 | |||
| man-hour | 94,88 | 81,02 | 117,32 | 94,88 | ||
| Average category of work | ||||||
| Machinist labor costs | man-hour | 3,98 | 3,98 | 3,98 | 3,98 | |
| Machines and mechanisms | ||||||
| 203-0850 | mash.-h | 3,98 | 3,98 | 3,98 | 3,98 | |
| Construction garbage | t | 4,6 | 4,6 | 4,6 | 4,6 |
End of group 50 (norms 5 to 8)
| Resource ID | Resource name | Unit of measurement | on wood | |||
| walls and ceilings | pillars, columns and pilasters | |||||
| beating area in one place, m 2 | ||||||
| up to 5 | over 5 | up to 5 | over 5 | |||
| 11-50-5 | 11-50-6 | 11-50-7 | 11-50-8 | |||
| Labor costs of construction workers | man-hour | 108,74 | 89,6 | 138,11 | 108,74 | |
| Average category of work | ||||||
| Machinist labor costs | man-hour | 3,98 | 3,98 | 3,98 | 3,98 | |
| Machines and mechanisms | ||||||
| 203-0850 | Single-bucket loaders, load capacity 1 t | mash.-h | 3,98 | 3.98 | 3,98 | 3,98 |
| Construction garbage | t | 4,6 | 4,6 | 4,6 | 4,6 |
Group 51 Cleaning the facade surface with a sandblaster
Scope of work: Installation of inventory boards in window openings to protect the glazing. Washing sand and filling the apparatus. Surface cleaning with a sandblaster with lifting, lowering and moving hoses. Collection of waste sand.
Meter: 100 m2 of cleaned area
| Resource ID | Resource name | unit of measurement | smooth | with rustication | ||||
| from land and forests | from the stairs | from cradles | from land and forests | from the stairs | from cradles | |||
| 11-51-1 | 11-51-2 | 11-51-3 | 11-51-4 | 11-51-5 | 11-51-6 | |||
| Labor costs of construction workers | man-hour | 26,07 | 32,51 | 31,19 | 31,19 | 38,94 | 37,46 | |
| Average category of work | 3,4 | 3,6 | 3,7 | 3,6 | 3,7 | 3,9 | ||
| Machinist labor costs | man-hour | 13,04 | 16,25 | 15,59 | 15,59 | 19,47 | 18,65 | |
| Machines and mechanisms | ||||||||
| 200-0052 | Sandblaster | mash.-h | 13,04 | 16,25 | 15,59 | 15,59 | 19,47 | 18,65 |
| 205-0101 | Mobile compressors with an internal combustion engine, pressure up to 686 kPa, flow 2.2 m 3 /min. | mash.-h | 13,04 | 16,25 | 15,59 | 15,59 | 19,47 | 18,65 |
| 270-125 | Cradles single self-lifting, load capacity 120 kg | mash.-h | - | - | (10,4) | - | - | (12,38) |
| materials | ||||||||
| 142-10-2 | Water | m 3 | 0,35 | 0,35 | 0,35 | 0,35 | 0,35 | 0,35 |
| 1421-10634 | Natural sand, ordinary | m 3 | 0,1 | 0,1 | 0,1 | 0,1 | 0,1 | 0,1 |
Group 52 Grinding plaster
Scope of work: Scraping water paint with surface wetting. Grinding of plaster with jointing of cracks.
Meter: 100 m2
| Resource ID | Resource name | Unit of measurement | interior spaces | smooth facades | facades with rustication | ||||
| from land and forests | from the stairs | from cradles | from land and forests | from the stairs | from cradles | ||||
| 11-52-1 | 11-52-2 | 11-52-3 | 11-52-4 | 11-52-5 | 11-52-6 | 11-52-7 | |||
| Labor costs of construction workers | man-hour | 39,93 | 50,82 | 62,87 | 61,22 | 68,15 | 85,47 | 82,01 | |
| Average category of work | 3,1 | 2,3 | 2,5 | 2,7 | 2,5 | 2,6 | 2,8 | ||
| Machinist labor costs | man-hour | 0,12 | 0,03 | 0,03 | 0,03 | 0,03 | 0,03 | 0,03 | |
| Machines and mechanisms | |||||||||
| 270-0014 | Construction mast hoists, load capacity 0.5 t | mash.-h | 0,12 | 0,03 | 0,03 | 0,03 | 0,03 | 0,03 | 0,03 |
| 270-125 | Cradles single self-lifting, load capacity 120 kg | mash.-h | - | - | - | (20,46) | - | - | (27,39) |
| materials | |||||||||
| 142-10-2 | Water | m 3 | 0,35 | 0,35 | 0,35 | 0,35 | 0,35 | 0,35 | 0,35 |
| 1425-11704 | Ready-made finishing lime mortar 1:2.5 | m 3 | 0,034 | 0,03 | 0,03 | 0,03 | 0,03 | 0,03 | 0,03 |
Group 53 Notching the surface for plastering
Scope of work: Notching the surface with strokes 3-5 mm deep. Cleaning the surface from dust and dirt.
Meter: 100 m2
| Resource ID | Resource name | Unit of measurement | walls, partitions, rectangular pillars, columns, pilasters and curved surfaces of large radius | ceilings, flights of stairs, cylindrical columns, beams, cornices and other small surfaces | ||
| by brick | for concrete | by brick | for concrete | |||
| 11-53-1 | 11-53-2 | 11-53-3 | 11-53-4 | |||
| Labor costs of construction workers | man-hour | 46,2 | 81,68 | 56,1 | 99,83 | |
| Average category of work | 2,2 | 2,3 | 2,2 | 2,3 | ||
| Machinist labor costs | man-hour | 0,35 | 0,35 | 0,35 | 0,35 | |
| Machines and mechanisms | ||||||
| 205-0101 | Mobile compressors with an internal combustion engine, pressure up to 686 kPa, flow 2.2 m 3 /min. | mash.-h | 0,35 | 0,35 | 0,35 | 0,35 |
| 270-131 | Pneumatic perforator | mash.-h | (0,35) | (0,35) | (0,35) | (0,35) |
Group 54 Foundation for plastering from a metal mesh
Scope of work: Marking and cutting the mesh into strips. Fastening the mesh to brick, concrete surfaces with mortar (1, 3, 5-7). Fastening the mesh to wooden surfaces and gypsum boards with nails (2, 3). Wrapping beams with mesh with fastening (4). Coating the mesh with a solution (5-7). Preparation of gypsum mortar (1, 3, 5-7).
Meter: 100 m2
| Resource ID | Resource name | Unit of measurement | on brick and concrete surfaces | for wood and gypsum boards | at the junction of wooden surfaces to brick and concrete | Wrapping beams with mesh |
| 11-54-1 | 11-54-2 | 11-54-3 | 11-54-4 | |||
| Labor costs of construction workers | man-hour | 134,64 | 85,8 | 117,38 | 43,23 | |
| Average category of work | 2,8 | 2,8 | 2,8 | |||
| Machinist labor costs | man-hour | 0,22 | 0,16 | 0,26 | 0,14 | |
| Machines and mechanisms | ||||||
| 200-0001 | Cars onboard, carrying capacity up to 3 tons | mash.-h | 0,1 | 0,08 | 0,13 | 0,07 |
| 270-0014 | Construction mast hoists, load capacity 0.5 t | mash.-h | 0,12 | 0,08 | 0,13 | 0,07 |
| materials | ||||||
| 111-0162 | Round finishing nails 1.6x25 mm | t | - | 0,0065 | 0,0035 | - |
| 111-0219 | Gypsum binders G-3 | t | 0,25 | - | 0,125 | - |
| 111-0874 | m 2 | |||||
| 142-10-2 | Water | m 3 | 0,15 | - | 0,075 | - |
End of group 54 (norms 5 to 7)
| Resource ID | Resource name | Unit of measurement | on the frame coated with mortar | ||
| ceilings, stairs | pillars, pilasters, rectangular columns, curved surfaces of large radius | cylindrical columns, beams, cornices and other small surfaces | |||
| 11-54-5 | 11-54-6 | 11-54-7 | |||
| Labor costs of construction workers | man-hour | 152,09 | 142,89 | 168,47 | |
| Average category of work | 2,8 | 2,9 | 2,9 | ||
| Machinist labor costs | man-hour | 0,78 | 0,74 | 0,8 | |
| Machines and mechanisms | |||||
| 200-0001 | Cars onboard, carrying capacity up to 3 tons | mash.-h | 0,38 | 0,38 | 0,4 |
| 270-0014 | Construction mast hoists, load capacity 0.5 t | mash.-h | 0,4 | 0,36 | 0,4 |
| materials | |||||
| 111-0219 | Gypsum binders G-3 | t | 0,25 | 0,25 | 0,25 |
| 111-0874 | Wire mesh with square mesh No. 05 without coating | m 2 | |||
| 142-10-2 | Water | m 3 | 0,15 | 0,15 | 0,15 |
| 1425-11704 | Ready-made finishing lime mortar 1:2.5 | m 3 | 0,42 | 0,39 | 0,43 |
The AlmrezMSK company performs full and partial removal of the plaster layer from walls of any type and area. The work is carried out by experienced teams in compliance with the standards and within the agreed time frame, and the cost of services is available to both corporate and private clients. When ordering the dismantling of plaster in Moscow with us, you get a reliable result at no extra cost.
What is plaster removal?
Dismantling plaster is a preparatory operation for the repair and decoration of walls and ceilings. The plaster is the basis for subsequent coatings, while protecting the material of the walls from the effects of negative factors. environment. Over time, this layer is destroyed for various reasons (cracks, swells, peels off, crumbles), and it is impossible to reliably mount new materials on it.
It is to achieve a high-quality result that it is necessary to remove the old plaster from the wall in Moscow, followed by the application of a new coating. This operation is quite laborious, so it is better to entrust it to specialists.
How is plaster removed?
All work can be divided into two stages: preparatory and main. At the preparatory stage, operations are performed on which the price of dismantling the plaster from the walls depends slightly:
- Inspection of the old coating, checking its condition, determining the type, etc.;
- Removal of furniture or its protection from dust with a film;
- Frame film protection, doorways, plinths and other details;
- Protection of adjacent premises from dust penetration - curtaining doorways, closing gaps, etc.
Next, the demolition of the plaster of the old partition, wall or ceiling is carried out directly. On the this stage Depending on the type and condition of the plaster, various operations are performed: peeling with spatulas, removal with a wide chisel and hammer, in some cases with a perforator or angle grinder.
This is additional condition to make you feel more comfortable when contacting us. If something does not suit you during or after the repair, just call our dispatch center by 24/7, and I will refund all your money down to the last penny! By the way, in 2018 we received only 9 requests for a refund (out of 38,990 requests!).
🔧 After the warranty, you will receive LIFETIME SERVICE
No need to worry about what will happen after the warranty. I give each client a lifetime service in Lenremont. This means that if repairs are needed again after the warranty period, repairs will cost 2 times cheaper! Thus, you get 25% discount on post-warranty repairs.
✅ 3 year repair warranty
Yes! I am so confident in the skill of my masters that I boldly give you 3 years warranty for repairs. This is the biggest guarantee in all of Russia.
And one more surprise - you will receive 4 months warranty for all parts, since Lenremont orders parts from a direct supplier.
This warranty means that, if suddenly need a warranty repair the master will come and fix the defects for free. Even if the master who repaired your apartment falls ill or no longer works for us, you do not need to worry that you will be left without a warranty repair: we have more than 100 craftsmen for each type of repair in our staff. We take full responsibility for making you, our dear customer, satisfied.
