Faucets

Repair of a double-glazed balcony door: how to remove a plastic balcony door from its hinges. Do-it-yourself dismantling of a plastic door How to remove a plastic door

Installing plastic doors today is a ubiquitous phenomenon. In residential buildings, they are part of the balcony block, and in administrative or public institutions they serve as entrance doors.

Structurally, plastic doors are not much different from their wooden or metal counterparts. Here, the box and the canvas, hung on 3-4 loops, are also the main elements. door block. Plastic door material includes metal carcass, dressed in polyvinyl chloride.

Door hinges are placed among themselves at equal distances, fastening of the lower and upper elements is carried out along the lines of the door frame. To remove the plastic door from the hinges, you need to know their device.

The hinge of such a door consists of an insert made of metal, a frame part with fixing pins and a spacer located between the door and the frame part. Adjustment of the compound hinges allows you to slightly move the door in the desired direction, to ensure its snug fit to the frame and smooth operation. In the horizontal direction, adjustment can be made using a loop template, and vertically - with special screws that are masked by decorative caps.

There are two main types of hinges, depending on their attachment to the profile, the requirements for them and the type of door: these are applied and overhead hinges. Overlay hinges are used for plastic doors of the balcony block. During installation, it is important to match the fixation points of the loop and the installation of amplifiers, which are located in PVC profile. Applied type hinges are used in the operation of swing doors, the installation of which is carried out in places with an active flow of people. Such hinges can act as an automatic closer, with which the door closes without human intervention.

The material for the manufacture of plastic door hinges is Teflon, which makes them reliable and strong. But sometimes there are defective fittings that can force you to remove the plastic door from the hinges to replace them.

Removing the door from the hinges

Thanks to the successful design of the plastic door, replacing a faulty hinge does not cause any special technical problems. For work, you can use pliers, a hammer and a doboynik.

Before removing the plastic door, you need to remove the caps covering the hinge mechanism. Then, using a hammer, carefully knock out the axial device. At the same time, the door should not be closed by turning the handle, it should only be covered. When, when knocking out at the bottom of the loop, a part of the axial device looks out, it must be pulled out of the groove with pliers. After that, the door leaf should be tilted towards itself. When it is raised by 2-5 cm, the lower support rod will be released. Lower hinges in PVC doors are not fixed. Therefore, lifting balcony door and taking it aside, the canvas can be easily removed.

You can remove the front plastic door using the technology described above. But its design has its own peculiarities. Entrance doors are reinforced, their hinges are reinforced and have anti-burglary devices. There are not two, but three hinges on the front door. This is due to the fact that the front door leaf frame is more rigid and with an increase in its weight, the load on the hinges increases. Removing a heavy front door alone is very problematic. Therefore, it would be wise to involve an assistant for such work.

Installing the door in place

After carrying out repairs, you need to install the door in its place. To do this, you need to perform all the above steps, but in reverse order:

It is necessary to place the plastic door leaf in the opening in a convenient way to install it on top of the hinges. The reference point should be the bottom loop. To avoid distortion, it is important to keep the door level.
The lower loop should be put on the support pin and the location of the remaining elements should be adjusted.
Then you need to set the door to the closed state, but without closing its lock. Otherwise, when the handle is turned, the canvas may shift and then it will not be possible to put on the remaining loops on the axis.
After that, all the axial cylinders of the hinges must be put in place and pressed from below on the pins so that their edges come up until they click. The edges of the pins should be in the initial position and protrude outward by 0.5 cm.
If necessary, the position of the door can be adjusted by twisting the hinges.
At the final stage of installation, put decorative caps on the hinges and check the operation of the door.

For trouble-free operation of the door, it is recommended to lubricate the door hinge elements or apply graphite chips to them.

Plastic doors are attractive and affordable elements that have, today, a wide range of uses. Entrance doors made of PVC can be seen in public institutions, private offices, production workshops. In private construction, plastic doors are used as balcony doors, doors to the loggia, to the garage, summer kitchen. Often, in order to repair the plastic sheet, replace glass or hinges, the plastic door has to be dismantled. How to remove the canvas without professional help - look below.

Plastic doors are mounted on two door hinges located on one side of the door frame pillar. Door hinges for PVC designs differ in the method of attachment to overhead and applied. For balcony doors, overhead hinges are used, which allow you to adjust the door. For pendulum entrance and interior plastic doors, applied hinges are used, which look like a door closer.

To easily and quickly remove a PVC door, you need to know the arrangement of door hinges.

A set of hinges for plastic doors consists of a leaf part with a metal insert, an aluminum frame part with pins for fastening, a metal alloy spacer for connecting the frame and leaf, and fasteners.

The components of the hinge allow you to adjust the door without removing it.

So, in order to adjust the door horizontally, you need to use a hinged template (metal tab), vertically - adjusting screws that are located under the decorative caps.

In order to choose a new loop to replace the old one, you must consider:

Door size and weight;
The design of the door frame and sashes;
profile wall thickness;
Way to open the door.

It is possible to replace the hinge only after removing the plastic sheet. To replace the door hinge, you will need pliers or a side cutter, a punch and a hammer.

Dismantling the entrance plastic door: how to remove it from the hinges

Removing the plastic front door from the hinges may be necessary if one of the hinges has been damaged or the door has failed and needs to be repaired. In addition, the door will have to be removed in order to lubricate the hinges with oil.

Specialists in metal-plastic structures it is advised to lubricate the door hinges at least once a year: this allows you to extend the life of the structure.

The procedure for removing the input PVC doors from the loops has certain nuances, because Entrance door, unlike interior and balcony doors, it is equipped with reinforced hinges and anti-burglary mechanisms. because of heavy weight designs, it can be quite difficult to work alone. In addition, the input metal-plastic door, usually hung on three loops.

In order to dismantle the entrance metal-plastic door, you must:

Disassemble all three boxes: remove the protective decorative trims by prying them with a screwdriver.
Press on the pin of the upper loop with a punch and pull it out of the groove at the lower end with the help of pliers.
Do the same with the middle loop.
Raise the doors up by 50 mm, and tilt the leaf towards you. If the canvas is heavy, then this can be done by moving a lever under the door.
Rotate the doors to actuate the bottom leaf rotary lever and remove the door from the bottom hinge.

After dismantling, you can lubricate or change the hinges, carry out work to repair the web. After the completion of the repair work, the main thing is to install the door evenly so that the canvas opens and closes freely. You can adjust the position of the door after it has been installed.

Instructions: how to remove a plastic balcony door from its hinges

The design of balcony doors is not much different from conventional interior doors: the balcony door also consists of a door frame and a leaf on hinges. You can dismantle the balcony door from the hinges on your own: due to the small size and weight of the door, you can work without outside help. In addition, the balcony door is often installed with only two hinges, which allows you to work quickly.

In order to remove the PVC balcony door from the hinges, you must:

Remove protective caps from hinges.
Close the door, but don't block it.
Press the pin of the upper hinge so as to squeeze its end out of the groove.
Grab the pin from the bottom of the loop and use the pliers to pull it out of the groove.
Tilt the door towards you and gently pull it by the handle towards the ceiling so that the lower one releases the lower pin.
Remove door from hinges.

After that, further repair work. The balcony door is installed in the reverse order: first, the canvas is put on the bottom hinge, and then leans against the plane of the door frame. Next, the upper loop is assembled: an axial cylinder is inserted into the loop mechanism from below. At the final stage, protective caps are put on the hinges.

How to disassemble a plastic door

Repair of a plastic door, in some cases, can be carried out without removing the canvas from the hinges. So, for example, without removing the door, you can replace the glass in the frame, the plastic sash in the leaf. The door consists of a frame, a double-glazed window and a PVC panel. The elements are held in the frame by glazing beads.

In order to disassemble the plastic door you need:

Prepare the instrument. Suitable for use with a flat head screwdriver sharp knife for a planer.
Insert a screwdriver into the groove between the bead and the door frame and pry off the bead.
Dismantle the top and bottom bead, then the side ones.

Then the glass or plastic panel can be easily removed and replaced with a new element. Beads are inserted back without additional fasteners.

How to remove a plastic door from its hinges (video)

Plastic doors, today, can be seen on almost any construction site: they can serve as entrance, balcony, interior doors. In order to replace the plastic door or hinges, if necessary, it must be dismantled. You can remove the doors from the hinges without professional help. This is done quite simply. The main thing is to strictly follow the instructions, and you will be able to dismantle quickly and efficiently!

There can be a great many situations when it is necessary to remove the door leaf from the hinges. It could be a replacement door structure or hinges on new ones, and difficulties arising when bringing in or taking out furniture, and repair work or other housework.

The process of removing doors from hinges

Knowledge of the design of door hinges, as well as simple techniques that allow you to perform this operation, will allow you to economically manage not only your own time, but also money. This article will tell you how to quickly and efficiently perform this action without resorting to the help of specialists.

The process of removing the doors from the hinges directly depends on the design of the hinges or canopies that were used during installation.

Door hinge design options

Modern models of loops are divided into the following types:

How to remove an interior door from its hinges

The fastening of modern interior doors can be different.

Consider the most common types of fastening and the procedure for dismantling.

To simplify the process of dismantling interior euro-doors, it is advisable to install an emphasis along the lower edge of the leaf.

Design scheme and size of hidden hinges for doors

If for lifting door leaf mount is used, then it needs to be wrapped soft cloth so as not to damage the coated wooden door.

How to remove a plastic door from its hinges

In the living quarters of a house or apartment, the installation of a plastic door is most often found as a balcony door and awnings designed specifically for this design are used.

Scheme for removing a plastic door from its hinges

To remove the plastic balcony door from the hinges, you must:

In administrative and commercial premises, metal-plastic euro-doors are often used as entrance doors. Their design is heavier and equipped with anti-vandal reinforced hinge mechanisms in the amount of 3 pieces, the device of which, as a rule, coincides with balcony ones.

In order to remove the front plastic door without damaging the plastic, it is necessary to involve an assistant in the work. See in the video how to quickly remove the plastic door from the hinges.

How to remove an aluminum door from its hinges

Eurodoors made of aluminum, which have recently been used not only in administrative, but also in residential premises, have a specific fastening with an adjusting mechanism.
The mounting loop itself can be of two types:

To independently remove the aluminum eurodoor, you must have additional hex keys, as well as asterisks.

Names of structural elements of the door hinge

However, it is worth noting that the canopies equipped with an adjusting mechanism have internal parts that provide the ability to change the position of the door leaf, so the disassembly of the hinges must be done very carefully or use the services of specialists.

Hide

Plastic doors need maintenance at least twice a year. This procedure includes lubrication and adjustment of moving mechanisms. Quite often it is required to remove the sash, however, how to remove a plastic door from its hinges , not everyone knows. This is a simple procedure that can be learned.

Application and design of a plastic door

Plastic structures are very often used in various residential buildings, used in office space, in production workshops. That's why knowing how to unhinge , can be very helpful. It is worth noting that plastic doors, regardless of their application, have a similar design, and the sash will be removed in the same way.

To dismantle the door, if such a need arose, it is necessary, observing certain rules, otherwise you can damage the structure. Before taking off to the balcony , you will need to carefully study its design, this will help you understand not only how the door hardware works, but also how it is removed. First, specify which hinges are on your door. They may be structurally different from each other.

Most plastic doors have a similar design, which is not much different from the design of a conventional hinged door. The main part of any door is a box: it is attached to the walls of the room, and the door leaf is screwed to it with the help of hinges. It is very important that the door is installed evenly, only in this case the canvas will fit snugly against the box, preventing cold and moisture from entering the room.

For plastic doors, they are structurally somewhat different from ordinary hinged hinges, they are held on a special pin that can be unscrewed, and it is not in a conventional hinge for wooden door. Pay attention to how many hinges are installed on your door: usually there are three, less often four.

Many designs have a glass insert, this not only significantly increases their weight, but also makes them more fragile, so you will need to be careful when removing the sash. It's best to do it together.

Hinges for PVC doors are screwed at an equal distance from each other. This is important, since this arrangement allows you to evenly distribute the load from the mass of the door leaf and avoid sagging of the hinges. The bottom and top elements are usually located on the line of the box. They look molded, but they are not: in order to get to the hinge retaining rod, you only need to remove the plastic decorative caps.

When do you need to remove the door?

The owners of the premises do not always have to think about how to remove the plastic door, more often the service is available without disassembling the structure, however, in the following cases, the door will have to be removed:

Some fasteners are worn out and need to be replaced. To replace and adjust some parts, an action such as removing the plastic balcony door is required.
The canvas is damaged and needs to be replaced, or one of the hinges needs to be replaced.
Repair work is underway in the room, it is required to protect the door from pollution, accidental damage, it prevents large objects from being carried into the doorway.
Moving furniture. It makes sense to remove the door so that it does not interfere, then install it in place.

How to remove the door?

Door hinges for plastic doors - the mechanism is quite delicate, so you need to handle it carefully. Removing the canvas should be as follows:

The mass of the sash is large enough, do not drop it. It is better to act with an assistant.

How to care for loops

If for some reason you have removed the door from its hinges, do not rush to return it back. Loops may need care, so it will not be superfluous to process them, taking advantage of the moment. To do this, you need to know how to lubricate the hinges of a plastic door correctly.

Rinse the removed structure from debris and dust clogged into it. You can do this with gasoline.
The surface must be wiped dry, remove the remaining dirt.
After that, you can lubricate the structure with a special lubricant. It can be a solid for hinges or a liquid that is sold in specialized stores. The second option is the most convenient, as it is packaged in a convenient oil container, with which it is convenient to apply lubricant. This can be done even if the door is in place.

To lubricate the hinges and mechanisms of a plastic door, only special oil should be used; you should not use substances that are not intended for this.

If you need to remove the door from the hinges, you can easily do it yourself. The procedure will not take long. Hanging the door back is also not difficult; you will need to proceed in reverse order.

Structures are often made of plastic. This material is not durable. There will come a time when you need information on how to remove a plastic balcony door. The reason may be the desire to replace an obsolete design or the need for repairs.

If we compare wooden and plastic doors, then the latter win according to such indicators: they do not swell at high humidity, do not fade in the sun, they are not afraid of wood pests. Designs can be found on the loggias of residential premises, in public places, offices.

It consists of a box, canvas, double-glazed window (if there is a glass insert). The total weight of the structure is considerable, so dismantling must be carried out carefully. The product is fastened with 3-4 loops for even distribution of the load, which does not complicate the removal at all. To mask the fasteners, plastic caps of the same color as the design are used.

If a plastic door with glass inserts, you will need an assistant who will support a weighty structure, because self-removal can lead to problems.

Fastening mechanisms are:

Card type. To remove the door from them, you can use the instructions below. To replace such hinges, you will have to unscrew the hardware.
Mortise type. In plastic structures, they are practically not found. To remove the door, it will be necessary to unscrew the entire fastening mechanism, because it will not work to pull out the upper axle and remove it from the pin.
Screw type. Often found on balconies. The fastening device is almost identical to the card type, so there will be no problems with it.
invisible loops. They look attractive, but to dismantle the door you have to remove them.

The loop device is complex. The fixture consists of:

folded part - insert;
frame part - contains pins for fastening;
remote part - a movable adjustable sleeve for connecting the frame or sash with a hinge.

When do you need to remove the door?

There are situations in which it may be necessary. In some you can do without removal.

Dismantling is mandatory if:

hinges rusted, broken;
part of the structure needs repair;
there was a need to adjust the position of the door;
you need to change the door or part of it;
a major overhaul is underway;
at finishing works- you can cover the door with polyethylene, but it is better to remove it;
to expand the opening when moving large items.

Dismantling guide

Before proceeding with the removal of the PVC door, prepare the tool.

You will need:

straight and Phillips screwdrivers;
a set of hexagons;
pliers;
doboynik, can be replaced with a narrow screwdriver;
pry bar or other object that will be used as a lever.

In several stages:

The door must be ajar. The frame with the sash is closed, but not tightly closed. The handle is parallel to the floor.
Removing plastic covers. The process is simple - pry with a screwdriver, bend the plastic.
A doboynik is inserted into the upper fastening mechanism, the axial mechanism is knocked out with light taps. You should not rush, use brute force, because you can damage the fastening mechanism.
It is necessary to knock out until the tip of the pin appears at the bottom of the loop, long enough to be able to grab. It must be taken with pliers, gently pulled down, removed from the groove.
Open the sash 90 degrees. Be careful, because if you open it incorrectly, you can turn out the bottom loop, which will render it unusable.
Tilt the profile slightly towards you. At this stage, you will need an assistant, because the sash is heavy. If it falls, it will damage the hinge, scratch the frame, and may injure the master.
Get the mount under the sash, rest it on the floor, lifting the structure. When the sash is 5 cm above its position, it will slide freely off the pin.

It is necessary to work with the mount carefully - sharp movements form dents on soft, pliable plastic.

In order for the fasteners to work properly, they must be periodically lubricated. This can be done with oil, which is sold in special tubes.

To lubricate the fastening mechanisms, you must:

remove the protective caps by prying with a screwdriver;
clean off debris with a brush;
rinse with gasoline (you can use a syringe);
wipe the surface;
pour oil into the hinges.

Removing the sash does not take much time. The main thing is to follow the instructions. Accurate execution of each stage guarantees a positive result. The dismantled structure can be put back in place using the same fastening mechanisms.