Pipes

Do-it-yourself swing from two halves of a tire. Do-it-yourself tire swing

Organizing a playground is not an easy task, but if you think about it, entertainment and children's recreation can be arranged from improvised means. Any dad will always have at hand a couple of three unnecessary old tires, that's just one of them you can build a whole playground. Such a playground can be equipped with decorative beauty for children, tire labyrinths, all sorts of devices for games, and, of course, swings. We present below 10 photos of excellent and unusual models do-it-yourself tire swing.

Surprisingly simple but comfortable children's tire swing.

Tire swing with seat and back.

Children's swing stylized as a ladybug.

Another type of children's swing with handrails and a tire seat.

Mounting swing in horizontal and vertical form.

Swing - a horse from a tire.

Tire swing for two.

Swing - a motorcycle made of tires for children.

A beautiful swing made from cut large tires.

Tire swing with chains for the playground.

What can be made from tires (with your own hands) - photo essay: 10 ideas

Tires are one of the most versatile materials; you can make home and garden furniture, a variety of tables and chairs, children's swings, mazes, a variety of garden decorations and much more from it. Let's imagine what you can do from tires with your own hands in 10 photo essay idea.

The most original crocodile from a tire covering a hatch on a personal plot.

An excellent example of country furniture from tires.

This composition has no equal, a few tires and a little fittings can embody a real masterpiece.

Excellent round table from an old tire.

Swings for children from old tires will always be relevant in the yard or in the garden.

Tire car for the playground, original, fun and cost-free.

A donkey with a flowerpot made of tires can even decorate a park.

The "funny" piranha will brighten up the garden and arouse the curiosity of friends and neighbors.

Wonderful firebirds can become not only a beautiful decoration for the site, but also a great place for your child to play.

A playground tire maze is a great solution that will always find a response in children's fun.

Read full (link)

The roof of my house is a shelter from all bad weather, as well as from adversities of a very different nature. Roofs are now made for every taste, from classic slate, tiles, corrugated board, to soft roof and the most recent fashion trends. This may include flexible tiles, membrane roof, bulk. And we'll talk about the roof of tires. Let's present 10 ideas for using roof tiles with your own hands.

A roof dome made of tires is the right solution, it is easy to make, and also attaching is not difficult.

Covering the surface of the walls and roof with tires will protect from moisture, from any bad weather.

But this building is completely made of tires, here is the roof and walls, all from failed tires.

Tire tiles will last a long time.

Synthetic roofing is a great and inexpensive solution.

Car tires are a great idea for creating a roof at home, the following example is a clear confirmation of this.

Another example of roofing from car tires - everything is done by hand.

Roofing made by hand from treated tires is a durable solution.

Another example of a roof made of tires in a kind of "gazebo".

Amazing tire shingles, on a beautiful, chic country house.

Do-it-yourself tire car. 12 great playground ideas

It is interesting that since childhood, children have an interest in mechanisms. In this situation, in order not to be afraid that the baby will climb where it should not, it is worth creating an analogy for him, there will be no limit to happiness. Just as they used to make wooden horses, now children's cars are made from obsolete tires. Below are 12 super ideas for a playground made of tires.

A great idea from tires, it turned out to be a super crossover, a great sports car.

A machine resembling a tank with a sight, great fun for kids.

A car made of tires that combines a sandbox at the same time.

Machines - tractors, a bold and bright solution for skillful hands.

The car is made of tires, highchairs are inserted as seats.

A car for a playground made of tires will always delight children.

An excellent hypercar made of tires, designed for four seats.

Tire car, spacious, enough space for everyone.

And here is a tire tank, a great solution for a playground.

Single car, comfortable, dad did his best.

At least four kids can perch on this car made of tires.

An excellent car made of tires, even the most indefatigable child will cope with this.

Read full (link)

Do-it-yourself tire well (decorative) -10 photos

Great idea for suburban area- create a well from tires. Tires themselves, the correct round shape, durable, and can be at hand in any household. Moreover, three tires are enough for a decorative well, a well - a flower bed. It is easy for a skilled owner to build such a well. And if you decorate and decorate it beautifully, it will be a kind of masterpiece on the plot.

A beautiful well of tires, in this model the roof is made of tires.

The following photo shows the stages of creating a decorative well.

A great idea for a well decorated with stone, a very realistic well turned out.

Decoration of tires in the form of a well made of "red brick".

An excellent decoration for the garden, in the form of a turquoise tire well with graceful flowers in a blue pot.

"Birch motifs" are good in any interpretation, as well as in creating a decorative well from tires.

A simple craft, it would seem, and a flower garden in the form of a well will always decorate a personal plot.

A tire well decorated with African giraffe motifs is a great idea for children's games.

In the next work, the tires are decorated with cement, everything is simple, but quite attractive.

A wonderful decoration of the garden is a full-fledged decorative well with a roof and a bucket that falls into the flower garden. Decorative white pebbles bordering the well stand out effectively.

Read full (link)

Armchairs made of tires with their own hands - 12 photos (The best)

Furniture for home, cottage or garden performs a completely natural function of convenience and comfort. However, the creation of furniture can be approached from an alternative point of view, furniture is created from the most controversial materials, such as tires, or tires. Tire chairs can be made with some design finds, which we will present below in 12 photos.

Tire garden seating set with air-covered seats and backs.

Blue painted chairs made from tires, even the armrests are made from the same material.

Armchairs made of tires, where the back smoothly passes into the armrests.

A beautiful invention of chairs and a table for giving, which ensures comfort and coziness in nature.

Tire covered with fabric smoothly turned into a mini chair.

And here are some more variations of chairs made of tires with interlaced seats.

Such a "brutal" execution of the chair will inspire its future owner.

Such a large set of chairs lacks a company of ten people.

The next chair can compete in style and beauty with other works.

The set "Armchairs, ottomans and a table" invites you to a tea party on the lawn.

Covered tires donated new life out of use items.

On such a chic red set of chairs and a table, 100% rest and a lot of positive emotions are guaranteed.

Read full (link)

There are many toys in the land of childhood. Girls are one, boys are completely different. But as soon as a building appears in the yard where you can ride, it attracts children of all ages, both boys and girls. Even if this swinging structure is unprepossessing, the children will still be delighted with it. Such an impression on them will be made even by a simple swing from a tire, which someone caring dad will build with his own hands.

The device of the simplest children's swing from a tire

It will bring joy not only to your beloved child, children of the yard, but also to young people who are not averse to swinging on this simple device. Swinging structures, in addition to being fun for children and adults, also strengthen and develop the vestibular apparatus. Such are the usual tire swings. Any parent can build them.

If a child, when he rides in a car, sways, feels sick, then he should swing at least once a day on this structure. When swinging, all the muscles of the body are evenly loaded, and this makes the baby physically stronger and more self-confident. He will stop weakness and dizziness, the fear of rapid movement and heights will disappear.

Such devices have pros and cons. Positive sides:

The disadvantage is the smell emanating from the rubber, which not everyone likes. You can get rid of it, or at least reduce it, if you paint the tire inside and out. It will also make it look more attractive.

Tire swing requirements

First of all, they must be very reliable, as they are established for the most privileged members of society - children. Therefore, a strong tire is needed, without cracks, damage. The tires of SUVs, tractors, trucks are preferred. But it is better if it is of medium size, so that it is convenient to swing for both children and adults.

Hang the tire on a strong rope or metal chain. So that the seat is securely held in a horizontal position, does not turn over, it can be made with triple fixation. From above, the device is attached to a horizontal bar, which can be a strong beam, a metal crossbar, or a thick branch of a strong tree.

The distance from the ground to the seat should be such that the child can easily climb onto it. The classic option is a double tire fastening with chains. It is the most durable, very comfortable, safe, because, while swinging, you can hold on with both hands. It is necessary to install ground or it is necessary so that playing children are always visible to their parents. When assembling ground structures using half rail as a support, always ensure their high stability.

A variant of the device for a children's swing in the form of animals

So that the rocking-balancer does not fall on its side, it is better to use both parts of the cut tire for the base, fastening them together along the entire semicircle. Handles should be made on the lever board for the children to hold on to while swinging.

Kinds

It would seem that with such a limited material, one cannot count on diversity. But home craftsmen do wonders with their own hands. Therefore, tire products are as follows:

Ground rocking-balancers in different variations;
Suspended swing with vertical and horizontal tires;
Figured swing-cradles with chairs made of tires, as well as with seats in the form of various animals and birds.

Ground rocker-balancer

it classic version swing. Not a single one can do without such a simple design. Two sit down on the edges of the board-lever and swing, then rising, then falling.

Instructions for the manufacture of a ground rocking chair-balancer from a tire

To raise one shoulder of the swing, the child sitting on it pushes off the ground while their partner lands on their feet.

Such devices are of the following types:

Swing on two car wheels;
Balancers on tire halves;
Rocking chair from a tire for a children's room.

To make such a balancing device with your own hands, you will need a strong, smooth board made of wood or some other material and a strong support for it. The original basis for the swing can be two car wheels with tires, connected along the axis by a metal cross member, to which a lever is attached in the center.

Swinging on such a design is liked by children and adults. It is also convenient because it can be easily moved around your own yard or summer cottage. There is another version of the rocking chair-balancer.

Take a wide tire from the wheel of a large machine, such as a tractor or tractor, cut it across and use one half as a support. You will also need two boards. One should be equal in size to the diameter of the tire and fit tightly into its upper part, where it is attached to the rubber with nails or self-tapping screws. The second, long, superimposed on the first and fastened to it.

For the convenience and safety of swinging, it is necessary to attach handles to the board, preferably made of soft material. Holes must be drilled in the bottom of the tire so that water does not accumulate in its cavity.

More stable will be such devices in which two halves of the tire are installed as a support.

They will need to be bolted together throughout the semicircle, and a long board should be attached on top. Rubber for greater attractiveness should be painted in bright colors, apply drawings.

An example of painting a children's swing from a tire

You can make a small swinging balancer with your own hands for, moreover, without having special skills. The technology of its manufacture is the same, only the upper plank in length should not be more than the diameter of the tire. Swing while sitting on it, you can only sideways, left and right. Armrests must be made along the edges so that the child can hold on to them.

And if the balancer is saddled from above, then a new fun will turn out: it will be possible to swing back and forth. On one side, instead of a handle, you can fix a horse’s head carved from wood, and on the other, a tail. Such rocking chairs are very popular with small children. You can come up with a stylized figure of another animal. It depends on the ability and creative imagination of the pope.

Tire swing

They are also very easy to build with your own hands. The main thing is to find a suitable crossbar to hang them. It can be a horizontally growing thick tree branch, a beam in a barn, or a specially assembled metal structure. And as a seat, of course, a car tire is suitable.

You need to choose rubber without damage, and strengthen it with a more attractive side up.

Before attaching ropes or chains, the tire should be thoroughly washed. detergent. The simplest swing is a tire hanging vertically on one rope or chain. Making them with your own hands is easy. They ride on such a swing, passing their legs through the wheel and hanging them from the other side.

The original design of a hanging tire swing

They swing by holding a single mount with both hands. But this is not very convenient. Such a device is usually suspended from a tree near the river itself, and the boys, standing on the tire, or grabbing its lower edge, swing as hard as possible, and then jump into the water. True, not every child will decide on such entertainment.

In the yard or in the country, it is better to make a swing, in which the horizontal seat rests on a double mount. It is desirable that it be a metal chain. They attach it to the tire using cargo bolts that have a ring instead of a head. For them, holes are drilled in rubber, fixed, and S-shaped hooks are inserted into the eyes. They are threaded into the lower chain links and clamped with pliers.

Attaching hooks to the tire

The upper ends of the suspensions are fixed on the crossbar. For convenience, a round wooden board is placed on the tire, and a pillow or rug is placed on top of it.

There is another option for a hanging swing - this is a cradle made of tires. It is also made by hand. With a shoe knife or other cutting tool, the protector is cut in a circle to the power ring from the metal cord, leaving only a part of the rubber for the seat. From above, ropes or a chain are attached to the resulting circles and suspended from the crossbar. On such a device, even very small children can be rocked.

Curly swing

Anything can be cut out of rubber from a tire. By bending it, you can make a chair with a back. Home craftsmen make swings in the form of various animals and birds. Sometimes near a private house there is a figurine of a horse, on which a baby is swinging, sitting on horseback. Some make rubber birds, dragons, even cars and motorcycles. Children enthusiastically climb onto such rocking chairs. The fantasy of dads is limitless and they willingly share it on the World Wide Web.

Modern children prefer TVs, computers and fancy gadgets to useful walks and games. And to make them fun on fresh air more interesting and exciting, you can create for them with your own hands various crafts for the playground. One of the simplest options for decorating a play corner is to create a swing from old tires. It is both simple and economical, and gives the opportunity to give a second life to worn-out car tires. But before decorating the site with crafts, we build a sandbox according to the scheme.

Tire swing for playground for children

In order to make a high-quality and durable swing from a tire, you need to choose the material with great care. Products of foreign manufacturers are well suited for this, since domestic tires are too hard, they are difficult to cut and bend. Also, experts note that winter tires are more pliable than summer tires, therefore, to create unusual figures, it is better to take just such.

To make it comfortable to ride on a swing, the diameter of the tire must be large, but too huge products from tractors will not work - even the strongest branch cannot withstand their weight. In this matter, one must rely on common sense and my own sense of proportion. You can also check out this important point like decorating a playground.

Rubber swing option for children

And, of course, the rubber itself must be strong and durable, because children will ride in it, whose safety comes first.

Rubber preparation

Before creating crafts for the playground, you must carefully prepare the selected tire. To do this, it must be checked for damage so that it can accurately withstand the weight of an adult.

Next, it must be thoroughly washed from dirt, because children will sit on the finished swing, and the cleaner they are, the better. For washing, ordinary dishwashing detergents are used, but ideally, you should use WD40 liquid, which displaces dirt and water from the pores of the material. Tires are cleaned from the outside and inside, after which the remains of detergents are washed off with water.

Drainage holes must be made at the bottom of the tire to prevent rainwater from collecting inside the finished product.

The choice of the basis for the swing and fastening

Tire swings are often hung from a branch in the garden. For the safety of the child, the tree and branch should be chosen very carefully. The tree itself should be mature, but not old, without visible flaws and lesions, of sufficient height. The branch should ideally be located at a height of 2.5-3 meters above the ground, there should not be other branches under it that interfere with the movement of the rope. In principle, the swing range of the swing itself depends on the height of the attachment, so for young children it makes sense to attach the rope to lower branches, and as they grow older, use their higher counterparts.

Select all necessary tools for making a hanging rocker

The thickness of the base should be at least 25 centimeters, it is better to choose a branch on which there is a flat area about a meter from the trunk, bounded on the sides by other branches - if you fix the rope in this place, the rope will not be able to slide to the sides. A distance of 1 meter from the trunk allows you not to worry that the child will hit it while swinging, but you can’t cling fasteners close to the edge of the branch - this way it can break off.

A rope is quite suitable for fixing crafts from a tire, because rubber does not differ in weight. But it must be strong, durable and wear-resistant, special climbing varieties will do. To extend the life of the rope, it is recommended to cover the rope with covers in places most often affected - around the branch, near the attachment to the bar, in areas where children take it, this will reduce the rate of fiber destruction. In any case, the ropes used in the outdoor playground need to be replaced every 2-3 years.

The rope is thrown over a branch in a selected place, tied with a sea knot, and the ends are later tied to the product itself. At the end of the work, the excess ends are cut off so as not to interfere with the children. If desired, you can use chains, they are more durable, but they injure the tree more.

Video of making a simple swing from wheels

Making various types of tire swings

Consider the manufacturing process various types car wheel swing:

Vertical swing

The easiest way to make a place for kids to play with your own hands is to hang the tire vertically, as in the photo. For this you need:

choose a strong, durable tire of medium diameter;
on one side, screw the eyebolts with your own hands - self-tapping screws with hooks on the cap;
to them to tie the ends of the rope, previously tied to the branch, chains can also be used, they must be fastened with carabiners;
install the tire at the right height, it depends on the height of the child, on average, about 40 centimeters should remain between the bottom edge and the ground, so the baby can independently climb onto the structure and safely jump off it;
drill drainage holes in the bottom of the wheel so that the water that gets inside immediately pours out;
test the swing for strength;
if necessary, level the soil of the playground under the structure.

The process of making a rocking chair

Horizontal swing

From a strong small tire, you can make a simple comfortable rocking seat. For this:

Select and wash a suitable tire.
With the help of eyebolts, make fasteners for a chain or rope on the flat side, if desired, you can make four or three supports, in the first case, wheels are screwed under two bolts on both sides at the same distance, in the second - with angles of 120 degrees on an equilateral triangle. The attachment points must be carefully calculated, because otherwise the finished swing will constantly warp.
Attach ropes or chains to the base.
Connect them to the hooks on the wheel, hanging it parallel to the floor.

In such a simple "armchair", made by oneself, not only children, but also adults will be happy to ride. If you want to choose something unusual for your dacha, then we offer you an original do-it-yourself swing.

Cradle

A more complex design that will decorate the playground. In addition, if you have a sharp shoe knife, making it yourself is a matter of a couple of hours. In addition to this option, we make a hanging chair from other improvised materials. You will need:

cut off the upper edge of the tire with a knife, leaving the rim intact;
on top of the received “handles” with the help of bolts with your own hands, attach brackets for attaching ropes or chains;
fasten the ropes on the brackets strong maritime knots, trim the remaining ends;
check the seat for strength.

Tire chair for playground

In such a cradle it will be especially convenient for very young children, while playing on the playground you will not have to worry about their safety. An example of the product is shown in the photo. If you don’t have a tire on hand, then you can make a garden swing from other materials.

Armchair

An original chair made of tires, as in the photo, can become a wonderful attribute not only of a playground, but also of any corner of relaxation. To make it you need:

cut off one rim from the tire;
along the perimeter of the second, make a cut to half the circle;
turn the rubber inside out;
bring the cut edge of the sidewall behind the rim - this will be the back of the chair, the curved opposite edge turns into a comfortable seat;
the place of inflection is fixed with bolts;
eyebolts are screwed into the “armrests” of the chair, chains or a rope are attached to them;
the whole structure is fixed on the base.

rocking chair

From tires, you can make with your own hands not only a hanging swing, but a ground rocking chair. For this:

you need to cut the tire in half, getting two halves of the circle;

Rocking chair from improvised materials

fasten a polished board with self-tapping screws to one half from the side of the cut;
make two holes on both sides of the board, thread a piece of thick rope into them - these are the handles that the children will hold on to while riding;
paint the product in bright colors.

Original crafts from tires

If you have imagination and free time, you can make it yourself original designs for children in the form fairytale heroes, bicycle, horse, motorcycle. To do this, according to the drawings received on the Internet, rubber is cut out in a certain shape, individual elements are fastened with bolts. Rubber must be cut with a shoe knife in the direction “up and towards you” to obtain even cuts, depending on the type of construction, the length and width of the cut tapes, the angle of the cuts differ, but the rims must be left intact - this is a guarantee of children's safety. The result is a fantastic swing - the perfect decoration for any playground. Examples of such products are shown in the photo below.

Who didn't love swings as a child? This simple fun captivates kids for long hours and is able to immerse even adults in pleasant memories. If it is not always possible to get out to the playground, it is worth building a children's swing in a summer cottage or even in an apartment if there is free space. Single or for the whole company - any option is easily implemented.

How to make a swing with your own hands?

First you need to decide where the swing will be located, after which you can proceed to the choice of a specific model. In an apartment, it is best to build simple single ones on ropes that will successfully fit into a simple sports corner or even into a doorway. At any time, they are quickly folded and removed, as a result of which they do not take up much space. If the swing is located on the street, in addition to the classic model, you can try to make a swing for 2 or 4 people. Some of them will require the need to work welding machine, but even if it is not available to you, in many cases you can replace metal with durable wood.

Almost any swing needs a horizontal support, for which a chain or rope will be attached, allowing the seat to swing above the ground. In its role in summer cottages is a strong branch of a tree or a ceiling beam under a canopy, in an apartment - a perpendicular jamb of a doorway. In addition, you can make a frame for a swing with your own hands: you will need 2 or more thick wooden beams placed vertically and driven into the ground to a depth of 30-40 cm to give them maximum stability. Exactly the same beam is laid and bolted from above. So that the ropes or chains holding the seat do not slip along it, they are fixed with metal brackets, or they are threaded into hooks installed at the bottom of the cross beam.

As for the calculations, it is advisable to lay in the height of the vertical beams the future, and not the current growth of the child, if you do not plan to change the summer cottage in a year. That is, it is recommended to immediately build a frame with a height of 1.8-2 m, and as the baby grows older, change the length of the ropes or chains on which the seat is suspended. It should be positioned so that it touches the child's waist. It is allowed to place it a little lower, but it is not worth raising it more, because then it will be difficult to climb on it.

Do-it-yourself tire swing: how to make?

Tire swings are considered the safest for small children, since in case of an accidental impact from a flying seat, its strength will be much less than from metal or wood. However, if your little one likes to fidget on the swing, it is quite possible that this version will not suit him. An easily bending tire will deform following the movements of the child. Most tire swing models are aimed at children 5 years and older.

The simplest option is built in a summer cottage, where there is a strong, mature tree, or no less strong horizontal beams, whose thickness is 15 cm. A free zone of about 0.7-1 m is needed around them so that when swinging, the child does not hit nearby items.

In addition, you will need a long rope, whose size depends on the height of the branch or beam, for which it will be attached. It is calculated so that after being thrown over a horizontal support, the ends do not touch the ground from a distance of 30-40 cm. The tire is located vertically, the ends of the rope are threaded into it, which are pulled into a tight knot located 80-90 cm above the ground.

More accurate parameters can be found by measuring the height of your child. The bottom edge of the tire should reach the baby’s waist and not rise higher, otherwise it will become inconvenient to climb onto the swing. the main problem in such a structure: find a sufficiently strong support and make the knot as strong as possible. They will ensure that the child does not fall off the swing.

For the smallest, you can make a more convenient and safe design, which also implies a good horizontal support. The swing-cradle is suitable for children aged 3 years and over, but it will take 2-3 hours to create them. The thick tire is washed and dried, after which 2 parallel lines are drawn along the circumference with a shoe knife, which will allow it to be opened. They should not go all over the tire, as some of it will become a swing seat, so at least 50 cm must be left intact.

The upper strip can be removed, leaving only 5-10 cm along the edge or eliminating this zone completely. The side areas of the tire will serve as handles, as well as parts for which the cradle will attach to the horizontal support. Fixation can be done with metal chains, or you can resort to the same rope as discussed above. It is not necessary to make a hole for fastening: it is enough to thread the rope into the already existing opening of the curved tire and tie a knot at the top.

If you use 2 tires, devoid of side parts and folded crosswise, as well as fixed with bolts, you can get an almost classic sloping seat that holds its shape well and is comfortable even for an adult. A swing seat similar in design is also created from 1 tire, on the surface of which an incision is made in half a circle, after which the tire is partially bent, and its side part is attached to the bent cut top. Additionally, the opposite side rubber needs to be removed, otherwise the tire will be less flexible. It is recommended to fix such seats to ropes or chains not with a knot, but through bolts, and also on each side by making 2 fasteners at a small distance from each other.

Do-it-yourself swing for children: a pair option

A swing is considered quite an attractive option, which allows 2 people to ride on them at once: this is a design that has 2 ends, which are seats. With it, there are a little more difficulties in manufacturing than with previous swing models. It is necessary to make a mechanism for lowering and lifting each part, which has the same algorithm as in the classical scales. Unfortunately, such children's swings with their own hands can be made only if they have the skills to work with a welding machine, since they cannot be completely assembled from wood.

In most cases, swing-balancers are taken water pipes with a diameter of 40-50 mm. 2 of them are deformed into arcs, 1 short one becomes a crossbar that rotates during use, and another 1 long one is a way to connect the seats at the swing.

The distance between the ends of the swing depends on the height of their base: their approximate ratio is 3:1. If the design is focused on a small child, the swing should not be raised in a horizontal state above the ground by more than 0.5 m. Children aged 5 years and older can take a height of 0.7 m. In this case, the angle of inclination can also be varied by reducing the length of the swing itself. The smaller the distance between their ends, the higher each of them will rise when the opposite edge is completely lowered. The task can be simplified by choosing metal mount with a wide surface area, which will work as a balancer, and all other parts, up to the central drain, will be made in wood.

In order to avoid sharp falls, fraught with concussion of the spine and injuries, it is recommended to attach soft and thick material under each seat, near the crossbar, for example, a rubber gasket. It will work as a shock absorber and will reduce the risks of unpleasant incidents, especially characteristic of overly active young children. In addition, be sure to build handles at each end, for which the kids will hold on. If a tree is taken to create them, details 7-8 cm wide are desirable, which are necessarily sanded and varnished. They are preferable to metal handles, because. reduce the chance of slipping. And to make the children's swing-balancers look bright and attractive for kids, you can decorate each seat in the form of a bird or an animal: for example, a duck, a swan, etc.

How to make a swing with your own hands: video

It is quite simple to build a children's swing with your own hands, and thanks to the variety of models, it is easy to fit such a design into almost any conditions: from a city apartment to a summer cottage and even a river bank. Given that this is a great way to train the vestibular apparatus and have fun, learning the intricacies of creating a children's swing is important for every parent.

CARVED CHILDREN'S SWING FROM TIRES
Carved children's swings attract special attention of our kids. They look like snails, from which happy faces of boys and girls look out. Of course, to create a carved swing, you will need some skill with tires and skillful handling of tools. But, as they say, the game is worth the candle! The swing looks not only great, but also safer for kids.

SIMPLE SWING FROM TIRES
You can also make a completely simple swing from tires: a tire plus a rope. It remains only to find a place where to hang the swing. But you can complicate the task a bit and come up with other nice ways to attach chains. It will be much more aesthetic and reliable.

SWING FROM CAR TIRES
Such a swing made of car tires also looks very nice, comfortable and reliable. Even our four-legged friends cannot refuse such a chic and unusual swing.

CHILDREN'S SWING IN THE FORM OF ANIMAL FIGURINES FROM TIRES
Well, here appearance The swing exceeded all my expectations. It's just a fairy tale given to children. On this funny swing, you can ride a horse across the open space or soar in the sky on a beautiful bird. One can only dream of such swings. But a dream is a dream, and a swing should be done for children. I will be very happy if my selection of children's tire swings is ever useful to you.