Advertising on the portal

Geyser baxi sig 2 11p to buy. Geysers Baxi: models and causes of their breakdowns

You can pick up the purchased goods yourself or use the delivery service in Moscow and the Moscow region. Having placed an order today, tomorrow you will receive it at your disposal. If necessary, you can use the service of prompt delivery and receive products today.

Delivery to the entrance (check with the manager about the possibility of raising to the floor)

Delivery is made daily from 9 am to 9 pm including weekends and holidays.

Specify exact terms of delivery at the manager!

Pickup points

Delivery cost in Moscow and the Moscow region:

  • Within the Moscow Ring Road - from 0 to 500 rubles, (Individual shipping cost is indicated in the product card)
  • Outside the Moscow Ring Road up to 10 km - 700 rubles,
  • Outside the Moscow Ring Road further 10 km - 700 rubles + 30 rubles for each kilometer.
  • In the regions, delivery by a transport company (calculated individually).

Shipping cost for

km from MKAD

700 rub.

Unloading of bulky goods is carried out by the forces and means of the customer.

Money is transferred directly to the courier upon receipt of the goods. This method is the most popular among buyers due to the simplicity and ease of calculation.

Payment bank card courier upon receipt

Couriers have a portable bank terminal available, which allows Teplovod-Service customers to pay for goods with bank plastic cards (check with the manager about the possibility of paying with a bank card).

Payment by credit card on the site

To select payment by bank card on the "Cart" page, select the item "Payment by bank card on the site".

Payment is made through PJSC SBERBANK using Bank cards of the following payment systems:


After clicking on the "ONLINE PAYMENT" button, you will be redirected to the payment gateway of Sberbank of Russia OJSC to enter your card details.

Please prepare your plastic card in advance. Additionally, you need to enter the full name, email, contact phone number, as well as the reservation number to identify the payer. The connection with the payment gateway and the transfer of information is carried out in a secure mode using the SSL encryption protocol.

If your bank supports the technology of secure online payments Verified By Visa or MasterCard Secure Code, you may also need to enter a special password to make a payment. You can check the methods and the possibility of obtaining passwords for making Internet payments at the bank that issued the card.

This site supports 256-bit encryption. Privacy Reported personal information provided by OJSC "Sberbank of Russia". The entered information will not be provided to third parties, except as provided by the legislation of the Russian Federation. Payments by bank cards are carried out in strict accordance with the requirements of Visa Int payment systems. and MasterCard Europe Sprl.

When paying by credit card, interest is not charged.

Payment is a transfer of funds from the buyer's current account to the seller's account, we work on a common taxation system with VAT. Delivery of goods is carried out after the receipt of funds to the account of the company "Teplovod-Service". This method is used in the calculations of legal entities.

Our details

    Limited Liability Company "Teplovod-Service"

    OGRN: 1105003006162

    TIN: 5003088884

    Checkpoint: 500301001

    BIC: 044525225

    Bank: PJSC Sberbank of Russia

    R/s: 40702810838060011732

    K/s: 30101810400000000225

    Jur. the address: 142718, Moscow region, Leninsky district, Bulatnikovskoe rural settlement, Varshavskoye highway, 21 km., office B-6

Special conditions

    For goods with the status "On order" worth up to 100,000 rubles. no prepayment required.

    For goods with the status "On order" over 100,000 rubles. a 30% deposit is required.

  • For any item shipped transport company, 100% payment is required.

Description

Baxi SIG-2 14 i - gas instantaneous water heater, intended for work in everyday life: in apartments, country houses or at the cottage. This model is able to prepare the required volume extremely quickly. hot water, differing at the same time in the compact sizes, simplicity of installation and service.

Like other models from the "i" series, this water heater is equipped with electronic ignition and an ionization flame control system.

Advantages of the Baxi SIG-2 14 i geyser

The water heater is based on an open combustion chamber and is equipped with an electronic ignition system. Power adjustment can be done very smoothly thanks to the presence of a modulating burner. The Baxi SIG-2 14 i water heater is perfectly adapted to domestic conditions, operating stably in the range of 13.5 - 20.0 mbar without reconfiguration due to the use of a built-in gas pressure reducer.

A versatile stainless steel burner, a scale-resistant brass hydraulic group and a heat-resistant copper heat exchanger with a protective anti-condensate coating ensure long column life. If necessary, the Baxi SIG-2 14 i water heater can be reconfigured to operate on liquefied gas.

This model is characterized as one of the safest in its class, equipped with several means of protection:

  • draft sensor - a thermostat that guarantees the safe removal of combustion products and instantly stops the gas supply to the burner in case of obstruction of the chimney (blockage, strong wind);
  • ionization flame control;
  • gas flow and power control knob;
  • digital display with indication of the current water temperature;
  • control knob for water flow and temperature.

The water heater comes with two control knobs, a filter (inserted into the fitting at the water inlet), a fitting with a gasket (attached to the input of the pressure regulator), a LR20 D 1.5 V battery, and hooks for hanging.

Discover Additional information about this model and you can buy a geyser Baxi SIG-2 14 i from the sales department.



Download instruction manual

Functional diagram of the column Baxi SIG-2 14 i

1. Smoke hood
2. Traction sensor
3. Water overheating sensor
4. Heat exchanger
5. Main burner
6. Flame control electrode
7. Pilot burner
8. Ignition electrode
9. Nozzles
10. Hot water outlet
11. Gas pressure measuring point
12. Temperature controller
13. Venturi nozzle
14. Water node
15. Water valve
16. Water filter
17. Membrane
18. Cold water inlet
19. Power regulator
20. Gas unit
21. Gas valve block
22. Gas filter
23. Battery
24. Control unit
25. Micro switch
26. Water temperature sensor
27. Gas control valve
28. Bypass
29. Water flow regulator
30. Soft ignition valve
31. Interchamber valve
32. Ignition valve
33. Main gas valve

Kozhukhov Ilya 22.03.2018 10:38

Advantages:

Small. Not noisy. Acceptable price tag. There is both a gas regulator and a water pressure regulator. There is nothing superfluous.

Disadvantages:

With strong pressure, it warms the water up to 40-45 degrees (winter in the yard). There is no temperature sensor.

I still don’t understand at what point when adjusting it is necessary to press the gas / water adjustment knobs.

General impressions:

Installed, it works. It does not make noise, the average water pressure heats up to 50 degrees, while everything is quite normal.

rust173 11.02.2017 22:31

Advantages:

Everything is done right.

Disadvantages:

Water entry at an awkward angle.

General impressions:

For some reason, this column is poorly promoted. But in vain. People are looking at boches, vailants, and so on, which are no longer cakes, as they used to be. In principle, I don’t want to get in touch with the Chinese - you look at their thin tubes of the heat exchanger, flimsy waterworks, like from foil, and you can’t believe at all that the column is working. Neva ... also somehow wasn’t impressed with the reviews, and the price tag at the column with the necessary functionality is something not domestic at all. Searched purposefully with gas reducer(flame modulation), with a brass hydraulic unit with a gearbox, and without newfangled plastic baubles in the connections, and so that there are fewer electronics - without batteries. If there is protection against extinction, the column on the wick suits me quite well - the meter does not react to the wick. Of the protections - there is everything necessary: ​​from the extinction of the wick, overheating of the heat exchanger and clogging of the chimney.

The column worked right out of the box, without tambourines and settings. The entrance of the water, though at an uncomfortable angle, but everything is decided plastic pipes. It ignites quite quietly, without explosions. I have the last floor, but the column starts briskly, because the cross section of the tubes on the heat exchanger is decent, and in the working part it is also increased, like the famous Mohr column. The heat exchanger itself is painted to protect copper from oxidation - we'll see how it goes. The column responds adequately to the controls, especially the "water flow", which is very unusual for me. Before that, there was a Proton column - so when adjusting the water, it simply did not light up. The handle was constantly at the maximum. And here the water handle is in the middle and the column does not react at all to the drain tank or open cold water. The column reacts a little to the second open hot water tap - the water becomes a little cooler, and the pressure drops, of course - I have an extreme floor.

In general, the design pleased - everything is done visually reliably, inspires confidence. Of course, it is too early to judge the reliability - if there are incidents, I will definitely add a review. While the flight is normal.

Baxi SIG-2 11 p is a gas instantaneous water heater designed to work in everyday life: in apartments, country houses or in the country. This model is able to prepare the required volume of hot water extremely quickly, while being compact in size, easy to install and maintain.

Like other models from the "p" series, this water heater is equipped with a piezo ignition and a thermocouple.

Advantages of the Baxi SIG-2 11 p geyser

The water heater is based on an open combustion chamber and is equipped with a pilot flame piezoelectric ignition system. Power adjustment can be done very smoothly thanks to the presence of a modulating burner. The Baxi SIG-2 11 p water heater is perfectly adapted to domestic conditions, operating stably in the range of 13.5 - 20.0 mbar without reconfiguration due to the use of a built-in gas pressure reducer.

A versatile stainless steel burner, a scale-resistant brass hydraulic group and a heat-resistant copper heat exchanger with a protective anti-condensate coating ensure long column life. If necessary, the water heater Baxi SIG-2 11 p can be reconfigured to operate on liquefied gas.

This model is characterized as one of the safest in its class, equipped with several means of protection:

  • draft sensor - a thermostat that guarantees the safe removal of combustion products and instantly stops the gas supply to
  • burner in case of obstruction of the chimney (blockage, strong wind);
  • control of the presence of a flame using a thermocouple;
  • gas flow and power control knob;
  • control knob for water flow and temperature.

The water heater comes with two control knobs, a filter (inserted into the fitting at the water inlet), a fitting with a gasket (attached to the pressure regulator inlet), as well as hooks for hanging.

You can find out more information about this model and buy a Baxi SIG-2 11 p geyser from the sales department.


Water heaters have a fairly wide scope, and for a number of reasons they are much more practical than full-fledged boilers. But even outstanding designs can break. And traditional European quality, alas, does not guarantee complete protection against such problems.

Peculiarities

It should be noted that Baxi produces not only flow-through, but also storage water heaters. But still, a considerable part of customers prefer speakers in the traditional sense of the word. Until recently, the products of the Italian brand in Russia belonged to the premium segment. But after the recent relocation of production facilities to Iran, the total cost of goods has decreased markedly, while the level of quality has not changed.

Modifications and alternatives

Before talking about the speakers themselves, you should pay attention to alternative proposals from the same concern. Storage water heaters the Italian company is represented by the SAG3 model. These devices are suitable for both domestic and industrial sectors. According to the manufacturer, using them to replace obsolete heating equipment means ensuring a stable supply of large amounts of water.

The design difference is:

  • open type of gas combustion chamber;
  • piezoelectric ignition;
  • autonomy from power supply;
  • high-quality enamel on the walls of the storage tank, which reliably restrains corrosion;
  • the possibility of installation both on the walls and on the floor;
  • environmentally and sanitary-neutral thermal protection.

But there are situations when neither such equipment nor the outdated model of the Main 24 fi boiler suits consumers. In such a case, the Baxi geyser comes to the rescue, providing the flow of water in flow mode. The Italian company has developed a family of devices SIG-2 for this purpose. All of them are equipped with an open combustion chamber, but there is a certain difference. So, models 11i, 14i are equipped with an automatic ignition module, and the 11p version uses a piezoelectric spark method.

Volatile modification 11i receives electricity to ignite gas from an Lr20 format battery supplied with the dispenser. The system is equipped with a module that monitors the air ionization characteristic of a burning flame. If it goes out, the automation sends the appropriate commands to the working nodes. The 11i is capable of providing nominal thermal power 22 kW and supply 11 liters of heated water per minute. For version 14i, these parameters are 29 kW, 14 liters of water.

Baxi automatic models are equipped on the facade with a liquid crystal display that shows:

  • preset water temperature;
  • its achieved level;
  • conditional error codes.

As for the mechanical controls, two of them are displayed on the body, respectively, setting the heating of the liquid and its pressure. Manual ignition on the 11p model is achieved through the use of a prepared piezo element and a control button inserted into the front panel. The advantage of a non-volatile design is its relative cheapness, which is also achieved by eliminating the digital screen. The system has a thermal rating of 22 kW and a water capacity of 11 liters in 60 seconds.

Automatic columns are equipped with:

  • hydraulic valves;
  • traction indicators;
  • copper heat exchangers;
  • devices that regulate water temperature;
  • Setaak gas pressure indicators;
  • economizers.

The copper heat exchanger is harmoniously docked with a hydraulic group made of high quality brass. themselves gas-burners are made from stainless steel grades. Any Baxi speaker is equipped with devices that provide smooth modulation of the assigned power. A reducer that controls gas pressure is also built into them. Automated models monitor the fire with an ionization element, while piezoelectric models are equipped with a thermocouple.

Specifications geysers cannot be fully described, if not to mention the dimensions of the device. The 11 l model has dimensions of 58.2x31.4x24.5 cm, for the version designed for a flow of 14 l, they are increased to 65x36.5x24.5 cm. The cross sections of the chimneys in these cases are 11 and 13 cm. Connection of both water and and gas is done using fittings cut into ½ inch. If you change the jets, Baxi geysers can be converted from natural to liquefied fuel.

Possible problems and their resolution

Even selected Italian speakers can have some technical problems. Troubleshooting directly depends on the type of equipment.

If there is no spark at SIG 2-11p, the causes may be related to:

  • disconnected wire of the piezoelectric part;
  • disruption of her own performance;
  • poor connection of the piezoelectric element;
  • electrode deformation.

A different approach is needed when column 11i, 14i does not light up. First of all, it is worth checking the health of the batteries. After that, inspect the wire through which the current flows to the electrode. Additionally, you will have to examine the electrode itself, automation, and the membrane. Such manipulations and subsequent repair (replacement) must be carried out by trained specialists.

The user himself can create the necessary water pressure by turning the regulator to the extreme position. It happens that a spark seems to be jumping, but it still fails to turn on the column. Highly common cause it turns out that the nozzle of the ignition device is contaminated, which is purged and cleaned mechanically. You should also check whether the electrode responsible for ignition is correctly positioned.

Additional measures are checking the opening of the gas valve, removing air that has entered the gas pipeline and replacing the problematic electronic unit. When the burner fuse randomly goes out, you will have to change either the thermocouple or the coil. Judging by customer reviews, it is sometimes found that the fuse is burning, but it does not initiate the burning of the main torch. The solution to the problem is to increase the pressure of water in the system or change the worn membrane. Sometimes there is another problem: even when the water is stopped, the burner does not go out.

The first step is to clean the gas valve shutter. Then the piston or stem in the water valve is disassembled, if cleaning them does not help, these parts will have to be changed. The next step involves checking the operation of the microswitch lever (only for automatic models). LPG devices may experience a similar problem if the regulator does not work properly. Too long ignition, accompanied by clapping in the burner, is “cured” by adjusting the flame strength, cleaning the fuses and injectors.

In the case when the heat exchanger plates become clogged too quickly, it can be assumed that the reason is insufficient draft, the dustiness of the room. Examine the chimney and increase the draft level if necessary. You can fight the yellow flame if you use only the type of gas for which the column is configured. Cleaning the burners often helps as well. The appearance of a gas odor means the need to inspect the gas pipeline and all joints with a soapy solution, following standard precautions.

It happens that the "aroma" of gaseous products of combustion spreads around the room. They begin to fix the problem by checking the draft in the chimney and the quality of the smoke removal. It is also worth evaluating whether the gas consumption has increased excessively, because its intensive combustion may exceed the evacuation capacity of the chimney. If the speaker screen shows readings when a new battery is inserted temperature sensor, but the system does not work when a hot tap is opened, it is necessary to adjust the screw that presses the pusher button to the microswitch lever. Strict adherence to these recommendations will significantly extend the life of the column and get the most out of it.

For the main malfunctions of the Baxi ECO 4s gas boiler, see the following video.