Advertising on the portal

DIY boat: the best projects and tips on how to make a wooden or plywood boat. Do-it-yourself fishing boat from a barrel How to make a boat from a barrel

In this article, you can see a video on how to make a homemade boat from a barrel with your own hands.

The video uses a 200 liter plastic barrel for technical needs.

This, of course, is not a homemade PVC boat, but it will do for fishing.

It often happens that a plastic barrel purchased for water leaks. It is no longer possible to use it for its intended purpose, but with a little imagination and a few straight hands, you can make a full-fledged home-made boat for fishing from an old plastic barrel.

To make a fishing boat with your own hands, you will need an unnecessary plastic barrel, plastic pipes for sewerage or electrical wiring, and a desire to make a homemade fishing boat.

Look at the video below, it is testing such a homemade boat.

As you can see, despite the very strange shape, it is quite possible to sail on a lake or a calm river on such a home-made vessel.

At first glance, it may seem that a barrel boat is very unstable on the water, but it is not! Sealed pipes located on the sides give this handmade boat not only additional buoyancy, but also stability.

By design, this homemade boat refers to trimarans.

Of course, in the basic version, such a homemade product can only be used to sail a couple of tens of meters from the shore and calmly go fishing. With a short rod. In this case, you can use a cheap echo sounder to detect fish and control the bottom topography.

If you want to put a motor on such a homemade boat, then it will have to be finalized.

Look at the video of the second version of a homemade fishing boat from a barrel.

)

As you can see, first of all, the improvements concerned an increase in the number of pipes used on the side floats of a home-made trimaran. Yes, and the length of the floats also increased.

Thus, the carrying capacity of the homemade boat increased and its longitudinal stability increased. It is understandable, the use of the motor introduces not only an imbalance during movement, but also increases the weight of the structure itself, because in addition to the electric motor for a home-made boat, it is also necessary to place a battery to power this propulsion unit with electricity.

The price of such a homemade boat is not great. Even a new plastic barrel costs about 1000 rubles, you will need to buy another 250 rubles plastic pipes. To bend and wrap pipes, you will need a building hair dryer, you can not buy it, but ask your friends. All seams will need to be sealed with silicone sealant, it will require another 150-250 rubles.

In total, a homemade boat for fishing will cost you only 150 rubles! You will spend no more than one evening on construction, in a day silicone sealant completely polymerized and it will be possible to start testing.

The advantages of such a homemade fishing boat include light weight and small dimensions. It can be easily transported on the top trunk of any car, and carried to the water alone.

It will be very difficult to turn over such a homemade trimaran, so you can fish without fear.

By the way, about Russian laws any boat equipped with an engine of 5 or less horsepower does not require registration. So - conquer the expanses of water and fish for health!

So it's worth reading the article.

My first boat ever built. My brother and I built a boat in 2010 for the kids and to explore a small pond. Construction took 1 hour. We have gained little experience in building a simple structure that requires basic tools and materials to create. The boat can be built for free or at minimal cost.

Note: The author is not responsible for any harm or injury in the creation and use of this watercraft. For a more stable construction, attach to the ends of the frame plastic bottles, for sustainability.

Materials:

  1. Boards of the same length;
  2. self-tapping screws;
  3. Plastic barrel with a capacity of 60 liters;
  4. Counterweight.

Tools:

  1. Drill and drills;
  2. plastic blades;
  3. Ruler;
  4. Roulette \ Meter

Cut out the side hole of the barrel.

Firstly, if your barrel has holes, in my case these are lids, in which case they need to be sealed. I don't have any actual photos, but I do have a Google SketchUp Model. Trace the bottom of the barrel as shown in the hole based on your size. Cut a hole large enough to get in and out of the barrel, but no further than half the length of the barrel. Drill a hole in the middle of your barrel to start cutting the hole. If you have sharp corners, smooth them out with sandpaper.

Build a square.

Lay the boards side by side as shown to form a 4x4 square. Fasten the boards with 2 or 3 screws at each corner.

We nail 2 boards for a place under our barrel.

Knock down 2 boards as in the photo. Between these boards we place our barrel. We fix the barrel on the current raft using adhesive tape or other. You need to fasten the barrel and the skeleton of the raft from the boards at the beginning and at the end.


An excellent alternative to an expensive boat can be a model made with warmth and love with your own hands. The review presents 8 interesting ideas for the manufacture of boats from improvised materials.

Boat made of plywood sheets



The boat made of plywood sheets cost its owner only $59, and it took about six hours to make it.

Homemade sailboat



Sailing boat with a double hull, each part of which has a different length.

Cardboard kayak for the pool



A homemade cardboard boat for playing in the pool will delight any child.

Boat made from plastic bottles



Empty plastic bottles economical material to make a functional boat.

boat in portuguese style



“I used the design of Hannu Vartiala, who kindly and completely free of charge posted a plan for the construction of the boat on his website,” says the owner of the kayak pictured above.

duct tape boat



Incredibly, ordinary duct tape can be used to make a fully functional boat.

Homemade sailboat



A sailboat made by yourself comes out much cheaper than its purchased counterparts.

Cardboard kayak under $40



A custom-made cardboard kayak is a great alternative to store-bought models, unless the user intends to use it professionally.

Hunting and fishing are the favorite pastimes of many men. Sitting with a fishing rod in the early morning in the thickets of reeds is a special romance for a fisherman.

Vehicles for fishing, and just for walking, use different ones - rubber, aluminum, PVC boats and even plywood.

You can buy absolutely any boat, if you have money, but how to make a boat with your own hands? We will tell in our article.

plywood craft

A homemade plywood boat is very light, easy to use and much cheaper than in a store.

The most important preparatory moment in construction are the drawings of the boat. Having accurate calculations, in the future you will not have to spend time and effort on reworking and fitting the product.

Calculations

We offer you one of the payment options. Transferring the drawings to paper, we will get full-size templates of all the necessary parts of the boat. Now you can “cut out” our product, and cut the blanks with an electric jigsaw. Having received all the cut parts, you can start gluing.

First of all, we connect the supporting structural elements, the transom (aft section) and the frames (transverse rib of the hull). Then the bottom and sides are attached to the transom, as in the photo of the boat.

To connect all parts, use epoxy resin and fiberglass tape. These materials will not only connect all parts of the structure, but also create a waterproof seam.

Assembling the boat

Having fixed the plywood to the side structures, you can proceed to reinforcing the angles between the sides and the bottom. They do this with the help of wooden corners, then proceed to sealing the seams.

To obtain a suture material, epoxy resin and aerosil are mixed in equal proportions. Further, the seams are not just lubricated, but filled with this composition.

Once the whole structure has dried, you can attach the seats. If the boat has a motor, we attach the transom and the bow cover.

The outer part of the boat also needs to be processed, it is necessary to glue all the external seams, also using resin and fiberglass tape, after drying, sand the surface. Then prime and paint.

Troubleshooting in PVC inflatable boat

If you already have an inflatable boat and you actively use it, then for sure there are often moments of leakage due to a puncture or cut in the material of the vehicle. Restoring a PVC boat is not at all difficult, it is easy to do in spartan conditions and even on the water.

Of course, to get a better result, you need to have time and better repair in the workshop. When fixing a leak, the glue dries, ideally, for 3 days, although there is nothing to worry about if you use the boat in a day.

If the boat was repaired on the water, everything must be redone when returning, since a patch glued hastily and without observing the technology will not last long.

If the puncture occurred while fishing or hunting, use only the defect elimination kit included with the boat.

Boat overhaul

For overhaul boats you need:

  • Repair kit (included in the package of the boat);
  • Scissors;
  • roller;
  • Pencil;
  • Solvent that promotes degreasing;
  • Adhesive brush.

Cut out a round patch from the spare fabric. It should be 4-5 cm larger than the cut.

Note!

Flatten the area to be repaired on a flat surface, remove dirt and degrease with a solvent. Put the patch on the hole and circle with a pencil, smear both surfaces with PVC glue and let dry.

After 15-20 minutes, repeat the procedure and allow time to dry again. After 5 minutes, restoration can begin directly. Feel the surface of the patch with your finger, it should stick slightly.

Then, to activate the adhesive surface, you need to heat the patch itself and the puncture site, a hair dryer is ideal for this, just act quickly so that the glue does not dry out.

Now you can apply the surfaces to each other with the sticky side, and carefully expelling all the air, iron the patch with a roller. Then let it dry for at least one day.

In conclusion of our article, we can say that it is not necessary to spend a lot on buying or repairing a boat. With some effort, you can enjoy what you love.

Note!

DIY boat photo

Note!