How to paint a wooden bracelet. Wood painting: bracelet "Town"

Painted wooden bracelets are one of the most unusual and beautiful pieces of jewelry. Most often, they attract attention with non-standard performance. Today, such bracelets are at the height of fashion and are a desirable thing for almost any girl or woman. Of course, you can buy a finished product, painted in one style or another. However, it is much more pleasant to paint such a bracelet on your own - this will fully reflect the author's idea and create a truly unique thing. In this master class, it is proposed to paint a wooden bracelet using the Gorodets painting technique.

What is required for this:
1) PVA glue or gelatin for primer.
2) Fine-grained sandpaper.
3) Acrylic paints.
4) Gouache or tempera.
5) Brushes: round "squirrel" No. 1, No. 4 or No. 5, flat "synthetics" No. 5
6) Clear varnish for wood
7) Wooden blank bracelet

First stage. First you need to prepare the surface of the bracelet for work. First of all, it is required to apply a layer of soil in order to close cracks and dents, which are almost always present on the workpiece due to the characteristics of the material. The easiest way is to use PVA glue for priming - it is available in any stationery store, it is inexpensive and does not require additional preparation before application. However, if you want to do everything according to technology proven over the centuries, dilute the gelatin according to the instructions indicated on the package, while observing the proportions of 1 part gelatin to 8 parts water. The primer is applied with a flat brush evenly over the entire surface of the workpiece, including the inside. If after application there are places where the soil turned out to be a little more, and it protrudes a little - do not rush to remove the extra layer and wait until it dries completely. After making sure that the primer is completely dry, you can take sandpaper. With its help, you can finally eliminate all the irregularities on the surface of the workpiece.

Second phase. Now you need to apply a background layer of paint, on top of which the main part of the painting will already be applied. It is best to perform this part of the work with acrylic paints, because after drying they are poorly soluble in water, which means that they will not be mixed when applying a further drawing. The background is painted with paint diluted to a very liquid state, and it is better to do this on a pre-moistened surface and extremely quickly. If this is not done, ugly stains will remain. It is worth noting that this makes the background semi-transparent, but if you don't like it, you can always add a few more of these layers. Traditionally, in Gorodets painting, the background is painted with either ocher or red paint. In this case, the background layer is rendered in red.

Third stage. Gorodets painting is carried out in several main stages. To begin with, the main color of the future elements of the ornament is applied. The basis of the flowers is a circle, complemented by protrusions-petals. Leaves are depicted with drop-shaped strokes. At this stage, it is already possible to make various additional decorative elements, and in the future - to supplement them. All elements of painting are best done with a round brush made of squirrel wool in gouache or tempera. You should start with the central objects, moving on to additional ones.

Fourth stage. This stage is called the "shade". It consists in working out some of the details of the ornamental elements using black paint. A "shadow" is made in various ways, depending on the element. This requires care and caution. Do not rush into the process of painting, because otherwise you can make a mistake in the position of the stroke or miss. You can use both a large brush and a brush of a smaller diameter.

Fifth stage. Now it's time to do one of the final stages - "revival". To do this, take white paint. The process of "animation", in its essence, is very similar to the process of performing "shade". It is named so because it really enlivens the ornament, makes it more interesting and even a little voluminous. After the "revival" it remains to finalize only the small details of the painting. They are made with a thin brush in order to get it as neat as possible.

Sixth stage. After the painting is completely ready, you can varnish the product. This is done so that when the bracelet is worn, the paint is not smeared or scratched. It is worth noting that when choosing a varnish you need to be more careful. First of all, it must be colorless, otherwise it will block and discolor the paint. You also need to pay attention to how quickly and well it dries, because there are varnishes that continue to stick even after several months. The varnish should be applied with a soft brush in order to avoid smearing the paint. It is necessary to varnish not only the outer part of the bracelet, but also the inner one. As soon as the varnish is completely dry, you can put on and wear the bracelet without fear of ruining it.

All photos from the article

To make a stylish and original jewelry, it is not at all necessary to use precious metals. From time immemorial, our ancestors used natural materials, the main of which was wood. Among the variety of various jewelry, wooden bracelets occupy a special niche, we will talk about it now.

Where can I find already assembled wooden bracelets?

If our lesson seems complicated to you, then you can always find a large selection of ready-made wooden bracelets at this link. For readers of our site, a special discount of 5% is provided for the code - rubankom.

Why is the tree

• Affordable price is far from the only advantage of the material, although from this side there are practically no equals to wood. For the manufacture of small crafts, which are bracelets, you do not need an expensive timber or a calibrated board. Furniture production waste in any workshop will be given to you for nothing or for a symbolic price.

• It does not require overly expensive tools or machines.. To get started, a set of sharpened knives and sandpaper is enough. As well as paints, impregnations and mastics, most of which can be made by hand.
• For any creative work, the concept of a clear instruction is generally inapplicable. If everything is in order with your imagination, then you can only ruin a wooden bracelet by completely destroying it. All other minor defects, with a competent approach, easily turn into original solutions.
• Since ancient times, it has been known that in addition to natural beauty, wood has a positive aura and such decorations can have a beneficial effect on their owners.

• Making bracelets is a great hobby, by introducing children to it, you will not only contribute to the development of artistic taste in your child, but also teach your child to use the tool correctly. In addition, the growing fashion for original work can turn your useful hobby into a profitable business.

The subtleties of working with wood

By and large, anyone can make a simple wooden bracelet with their own hands. This area can be conditionally divided into two areas. The first and simpler are carved and inlaid bracelets with an open array texture. The second direction is

Tip: do not start with highly artistic carvings or fine paintings. Take care of what you can do here and now. Remember, skill comes with time.

What kind of wood to choose

Of course, it is better to start with, such as linden or cedar. Having mastered the basics of work, it will be much easier for you to switch to hard and dense wood. Also, not the last role is played by who exactly the bracelet is made for.

Dark wood bracelets for men with an open pronounced texture. While light and painted decorations impress the weak half of humanity.

Thin branches, as well as the upper part of the crown, have a too porous structure, they are not strong and it is harder to work with them. Professionals prefer to use the lower part of the trunk or thick roots.

Tip: Small and thin parts break easily. Therefore, an array on which there are knots is better to immediately postpone, use only homogeneous wood. Agree, it will be a shame if the finished segment, in which you have invested your work, bursts on a knot if carelessly pressed.

There is never too much jewelry in a girl's box. Now a large number of handmade jewelry has appeared, this is plastic, and epoxy, and beads, and knitting, and what needlewomen do to decorate themselves. I propose to join them and master another technique for creating designer jewelry - “One Stroke” or a double stroke.

To paint bracelets using the double stroke technique, we need:

- Flat synthetic brushes No. 4-5 and No. 10.

Stage 1.

First you need to moisten the workpiece with water so that later the paint spreads on it, forming smoother transitions.

Stage 2. Background for painting.

We color the bracelet, creating a background for the future painting. To do this, with transverse movements of a wide brush, we apply paint of the first color on a wet base and paint over a few centimeters of the surface. Without washing off the remnants of paint from the brush, we pick up the second color and continue moving. So you can type up to three or four color transitions, however, I do not recommend too colorful, since we will paint the bracelet with flowers on top, and a colorful background can spoil the impression of them. We end with the same color that we started in order to complete the ring without sharp transitions.

We paint the inside of the bracelet in one color. It can be any, the main thing is that it matches the painting in terms of scale.

Stage 3. Now we need to start painting. To do this, we need a palette to make the color bar and a sheet of paper to practice. If you have not picked up a brush for a long time, and even more so, if you have never painted using the one stroke technique before, then be sure to practice on paper first. The diagram shows what elements we need for painting.

Do not lift the brush from the surface, performing one stroke. One movement should give one element.

Step one:

Let's make a color band. We collect on one edge of the brush a light color, on the second - a dark one. We draw exactly on the palette, then we will constantly use this strip, adding a little bit of paint.

Step two: Let's try to make a simple petal. The height of the petal will be equal to the width of the brush. We set the brush vertically, press lightly so that the pile bends. The brush does not need to be laid down completely, it must remain in an upright position. Then we slowly draw the arc, while one corner of the brush remains motionless.

Step three: A more complex petal can be drawn in the same way, but add an up and down movement to the arc movement. The main thing is not to make too much run-up between zigzag movements, we make them no more than 1 mm apart.

We make a flower from three complicated petals, wait for it to dry and make 3 petals in a checkerboard pattern on top of the first ones. For the next layer of petals, the brush can be turned over so that the colors are reversed, but you can, of course, not do this.

Step Four: Leaf. We repeat the zigzag movements and the movement along the arc, but with each subsequent movement we reduce the height of the zigzag. That is, first we put the brush with all the pile on the paper, and, without stopping the movement, we gradually raise it so that the sheet becomes thinner.

General advice. Remember to periodically add paint to the color strip. The brush should not be wetted too much, only lightly moistened from the tip.

Don't lay the brush too hard and try not to lift the brush off the paper while you're painting, even when you need to make a turn.

When painting, it will be more convenient to rotate the product or sheet than to attach the hand to the desired angle. If you are just getting acquainted with this painting, then it will be most convenient to outline the flowers and leaves with a pencil on the product in the size of the painting. This will help to understand the composition and facilitate the process of painting.

Stage 5 Additional elements. After the bracelet is painted with flowers and the paint has dried, we proceed to underline the pattern. We take glitters and apply dots along the edges of the petals and in the center of the flower. Teardrop-shaped dashes highlight the edges of the leaves. To do this, first we press the tube harder, and then we stretch it almost without pressing. The final touch: we apply spirals, sprouts and lines on the part of the bracelet without a pattern, if there is space left between the flowers, then you can apply the same lines and spirals between the elements of the painting, with small visits to the flowers.

Well, here is our bracelet! When you fill your hand, then making such a bracelet, pendant or box is not difficult and does not take much time. Wear with pleasure!

Artist: Averinova Alexandra

Wooden bracelets are perfect for creating casual, ethnic and eco-style looks. They look beautiful, stylish and quite inexpensive.

photos

Varieties

Wooden accessories are one of the most ancient types of jewelry.. Today they do not lose their relevance. The desire for simplicity, environmental friendliness, naturalness of everything we touch makes wood one of the most desirable materials.

The tree is incredibly malleable, so the imagination of designers is not limited by anything. It is even theoretically impossible to describe all varieties of wooden bracelets. Let's take a look at the most popular models.

Bead bracelets. It's simple: wooden beads are assembled on an elastic band. These can be small beads on a long elastic band that wraps around the hand several times. Another model is just beads of any size, assembled on a string in a row.

Very beautiful accessories are obtained from non-round beads. For example, a bracelet made of pieces resembling tangerine slices. It gathers beautifully around the wrist and frames it.

Beads can be square, oval, "tubes". Bracelets made of long and thin beads collected by a “palisade” look a little more predatory - they perfectly emphasize thin wrists.

One-piece bracelets made on the basis of a wooden blank. It can be round or square, triangular in shape. Their width is also unlimited.

Such accessories are made of precious woods - then you just need to polish the bracelet well and it will be beautiful in itself, showing a natural pattern. Sometimes such bracelets are covered with artistic painting.

Carved women's bracelets look incredibly elegant. As a rule, such accessories are made by craftsmen by hand - their cost is much higher than beaded bracelets. Such accessories usually gravitate towards ethnic style, fantasy style and fit perfectly into the summer wardrobe.

Wooden decorations can be made independently, for example, popsicle sticks. This is a great idea for children's creativity, although, with certain skills, you can make quite a decent "adult" decoration:

• Clean popsicle sticks should be put in warm water and put on fire. Boil for 15-20 minutes.
• After that, having cooled slightly, the sticks must be gently bent, forming a half ring. You can put them in a wide glass from the inside, pressing against the walls. Let dry.
• After that, the blanks can be removed and painted as you wish. In addition to paints, you can use lace, threads, ribbons and other decor methods.

How to make a bracelet from ice cream sticks, see the following video.

Real craftswomen can try decoupage. You need to purchase a blank for a bracelet, which is sold in art stores. With the help of napkins, decoupage cards or simply printed pictures on a printer, the bracelet is decorated as you wish. Acrylic paints, PVA glue and a special fan brush are also useful for work.

Jewelry with meaning

For many people, wooden jewelry is more than just accessories. . A wooden bracelet can also be an amulet. For example, a decoration with a symbol "tree of life" which is revered in many countries. Such a bracelet, on which the tree is present in the form of an interweaving or pendant, is considered a talisman. It is often used by pregnant women - the tree of life is considered a symbol of new life, and also protects against evil forces and gives strength to character.

Believers can wear an accessory with icons - the faces of saints appear on square beads. You can choose a bracelet with exactly those biblical characters that suit a particular person.

For those who are not alien to esotericism, the very type of wood from which the bracelet is made is also important. It is believed that each tree has its own energy and meaning.

For example, sandalwood jewelry is very popular, because. have protective properties: they allegedly “do not let” negative energy to the owner of the bracelet. Very often, such accessories are chosen for children.

Suitable for those who are often sick juniper decorations. They smell incredibly delicious.

For success in business and career (which is very suitable for men) - ideal oak jewelry to relieve stress maple.

You can choose "your" tree according to the sign of the Zodiac or according to a special calendar - the horoscope of the Druids.

How to wear

Since wooden bracelets still have a certain style, it is best to wear them in combination with natural fabrics. Suitable linen, cotton, wool. Ideally, if the fabrics are textured: coarse linen, thick cotton, coarse knit. Well, wood jewelry is suitable for clothes made of denim, velveteen, leather and suede.

If the accessory is made in the color of natural wood, then it will look best with natural shades of fabrics. These are milky, beige, all shades of brown, khaki, terracotta, shades of sand.