Pipes

With your own hands from the roots of trees. Original crafts from tree branches that you can do yourself

Dacha is a place where everyone can work hard and, of course, relax and unwind. To beautifully build a place to relax, you need a dumb imagination. In this article, you will read and learn how to make original crafts from stumps for a summer residence, and what materials will be needed for this.

In this way, you can embellish your landscape without spending a lot of money on it, in some cases even spend only time and effort.

Thus, you will get a wonderful decoration for your garden.

What can be done from stumps?

A person has a lot different ideas, and sometimes you think how you yourself could come up with and build this or that thing. Almost everything can be used, even very old things. This is exactly what happens with old stumps that are thrown away or burned. But you can try and make something out of them. You will think about what can be done, and we will answer very beautiful crafts, easy!

First of all, an old stump can perfectly become furniture, She's so needed in the garden or in the country. You can make a high chair for children from a small hemp, if there is a large one, then for an adult.

If the height of the stump allows, then you can cut out the back (using a chainsaw), and if it is wide, then the armrests will be an excellent support!

If the stumps are very small, this is a good decoration for the playground. It is enough to grind the top of the stump and apply bright colors.

If chairs are made, then the table is very appropriate here.

In such an atmosphere it is pleasant to relax and drink tea in the shade of a sprawling apple tree. In this case, the stump can serve as a support for the countertop, but if it is large, then it can be a table. Then we level the surface of the stump and apply special impregnations, not allowing it to rot. On the sides of this stump, two planks should be nailed parallel to each other and two more perpendicular to them. After that, you can build a countertop of any shape. This is one of the most common options. For the durability of your table, you need to varnish it.

Well, you can create other crafts for the garden, using them like garden sculptures. For example, a bright fly agaric can decorate your green meadow.

A stump will serve as a mushroom leg, but a hat can be made using a basin or bowl, covering it with spray paint. After it dries, draw white spots. You can also decorate the leg, depict a face and get a wonderful live fungus. You can do the same with other mushrooms of your choice.

With a little imagination, you can create an original statue for your garden.

The stump can serve as an excellent support for a sculpture, a flower garden, or just a barrel of water.

You can also create wonderful containers for planting plants! To do this, simply cut out the inside of the stump and fill it with drainage, fertile soil and the plants themselves. Well, a young flower is suitable here, for which only 4 cm of earth is needed.

You can also use a large stump by placing flower pots there. And if you cut it to a depth of 25 - 30 cm, you get a real flower bed. For such a flower garden, we also fill up a drainage layer of 5 - 10 cm and 20 cm fertile soil. And planting plants.

Suitable for such a flower bed climbing plants(petunias, ornamental strawberries, etc.) This will go very well with landscape compositions.

The use of driftwood in the country

Crafts from snags and stumps look very nice, which perfectly complement the composition. Almost everyone in the country has a large broken branch or a fallen tree. This can serve as an excellent stand, for example, to support a washbasin in the country.

From a large branched branch, you can make a wonderful composition that makes up your landscape. To do this, it is necessary to thoroughly clean the snag, treat it with a protective compound and fix it in the ground by concrete or digging it to a certain depth.

If there is an alpine slide in the garden interior, then it can be perfectly supplemented with moss-covered snag. It will turn out very beautifully if you additionally plant it with plants.

There can also be many natural recesses in the snags, which are enough to fill with soil and plant stonecrops there, young and others. It will turn out very nice.

If there is a V-shaped branch at hand, then this is perfect as a clothes hook. It is necessary to fix one end of the rope on a branch, and the other on the wall.

A bench is perhaps the most common option. A snag of such a plan will create a beautiful and unusual look. It is necessary to choose only strong branches that can withstand the weight of a person.

You can make excellent candlesticks by cutting wood into several cylinders, making small indentations in it. You just have to be careful, it can easily burn out.

Of course, do not forget that the tree is quite fragile. It can eventually rot, be exposed to moisture and collapse. And snags with stumps are even more so, since these are already old trees.

To prevent this, the first step is to treat everything with special chemicals and varnishes, making crafts on long term. Well, if you are more satisfied with the effect of moss, but there is no need to process them.

Autumn is an interesting time of the year. First, the crowns of the trees acquire yellow and red color, and then the leaves fall off, leading to discouragement. It is during this period that you need to diversify your life with something interesting and original. It will be about crafts from snags. It turns out that branches that are unnecessary at first glance can be very useful to you in the interior or on. Consider 5 workshops related to making beauty with your own hands.

How to prepare branches for crafts?

From ordinary unremarkable driftwood, you can make original wood, which will later be used for homemade gizmos.

Many craftswomen wonder about the intricacies of preparing this material. The process is simple if you follow a certain procedure. For preparatory activities, you will need the following items (they are in almost every home):

Plastic container.
Soda ash.
Sandpaper.
Linen bleach.

Branch preparation

Using branches for furniture

Large snags are ideal for and. Medium size raw material will become the best option for the manufacture of shelves, . And small snags will come in handy for individual details. In the manufacture of furniture designs, it is important to take into account some points.

Driftwood must be strong, because they have to take on a colossal load, especially when it comes to pieces of furniture of impressive size.
Raw materials are prepared for work in accordance with the information specified above. They need to be bleached and sanded.
Next, prepare the tools. You will need a drill, nails for knocking down snags, if the furniture design provides for this. Other equipment necessary for is being prepared.
After the production process, driftwood should be treated again with compounds that prevent rotting and pests. Leave for a couple of days, and then put the piece of furniture into operation.

Since there are a lot of furniture designs from snags, it is worth using tips for making specific types of furniture.

Lighting

From driftwood, it turns out, you can make chic! Of course, there are many design options, but we will consider the process and algorithm using the example of a classic product. Whatever we say about his standard, he will look unusual, but his appearance will allow it to fit into absolutely any interior.

Now - about the order of manufacture. arm yourself certain materials and take action.

Take one large snag (up to 1 m long). It is desirable that it has an interesting shape (curly branches arranged in the original order). Choose the breed at your discretion, but it is best to give preference oak or needles: the production process will give you a lot of pleasant emotions, and the result will amaze you with its unusualness.
Process the wood according to the first master class, and then make holes in it along the entire length of the base and individual branches at a distance of 10 cm from each other in order to insert decorations into them. It can be metal fittings, decorative stones, ribbon bows.
Prepare the base for. It can be a purchased item in the form of a regular stand. Then you need to connect the stand and snag convenient way. To do this, you will have to acquire carpentry skills, it will be difficult for a beginner. The thickest part of the driftwood should be located closer to, and the thin one will act as the top.
A decorative braid or rope 20-30 cm long is suspended from the upper part of the structure. On the other side of this thick thread, an electric mechanism will be located, that is, a system for turning the lamp on and off.
So that the light bulb is not “naked”, provide a lampshade for it. This step is up to your imagination. Can make it with your own hands or buy a ready-made version.

Original panels from snags

If you want to get involved in the process of such needlework, to help you -. They are hung on the wall and used as paintings or stands for candles, souvenirs.

In our case, a master class on making panels will be considered.

Prepare a rectangular snag (this can be a log cabin) 30 cm long and 10 cm wide. Process it in accordance with the first master class. This will be the basis of the panel.
Another element is attached across the base. It should have the shape of a parallelepiped and match in length with the width of the base. Fastening can be done with nails or good wood glue.
Then you just have to process the tree and put a candle on the protruding element - your home will be transformed in the blink of an eye!

This is what the original panel looks like. If you follow the given instructions, the result will pleasantly surprise you.

It is impossible to list all the ideas that the craftsmen have during the manufacture of various crafts from snags. We will focus only on a few fairly simple but effective decorative items. Men should do some of them, while women can handle others without any problems.

What do you need for crafts? Just two things.

A wish. Manufacturing various items does not attract everyone with his own hands, some of our compatriots prefer to buy beautiful things in stores. The article is intended for those who get real moral pleasure from things made with their own hands and do not want to have consumer goods in their home.
Free time. It is required not only for the creative process itself, but also for the preparation of snags - you must independently visit the forest in search of suitable material. True connoisseurs home creativity from every outdoor recreation, various branches and snags are brought home. Suppose that during the collection of blanks there is still no clear idea of \u200b\u200btheir future fate, then each branch and each snag will find its purpose.

Process steps

Each business must be organized and planned in advance, in this way it will be possible to avoid many annoying mistakes.

The more blanks you have, the easier it is to work later. The fact is that creative ideas come during production, and for their implementation you need to have material.

Howrightcook driftwood

For crafts, small snags are used, their preparation can be done at home. The process consists of several stages. First of all, the surface must be cleaned of dirt, use any brushes. To facilitate the process, it is recommended to pre-wet the dried earth. Next, special processing is performed.

Prepare a container according to the size of the snag, it can be a plastic bowl or a barrel, it doesn’t matter, the main condition is that the snag should be completely obsessed with it. If you soak it in separate sections, then it is likely that stripes will remain on the tree indicating the boundaries of the water. This has a very negative effect on the appearance of the product, it is difficult to get rid of the marks.
Add baking soda to the water at the rate of 100 grams per liter of water.
Lower the snag into the water and press it down firmly with a load, it should not float, but completely immerse in the solution. Hold this position for at least a day.
The surface of the tree is cleared, but darkened - this is an action baking soda. If your craft requires White color surfaces, then pour into clean water bleach at the rate of 1:15 and again drown the snag in the liquid, soak for at least two days. Periodically check the condition, you can increase the concentration of bleach or exposure time.

Now you need to get the snag and dry it well. What to do with it further depends on the type and manufacturing technology of the selected craft.

Prices for wood preservatives

Impregnation for wood

MostsuccessfuldizaineRussianDIY solutions

Name of crafts	Description and tips for making
	Not a single person can repeat the natural pretentiousness of the curves of a driftwood; its forms best of all reflect the freedom of natural development. It is necessary to pick up a snag with long roots, if there are none, do not be discouraged. You can bend them in the desired position later in hot water. It is very important to come up with a stand, it must guarantee the stability of the structure and prevent tipping. Wood can be natural in color without various surface finishes. The electric cable must be hidden, it will not be possible to do this with the help of branches, it is recommended to use a thick natural linen rope for this purpose. There are options for using individual parts of a table lamp or sconce and attaching them to snags in an original way. During manufacture, unquestioningly follow the requirements of the EIC, do not forget that wood is a combustible material and requires special fire protection measures.
	A simpler craft, both large snags and individual branches can be used for manufacturing. Options design solutions so many, no one is the same. Each twist of the driftwood can be used to give it a distinct look and accentuate its geometry.
	Any photographs decorate the interior, and if they are also in exclusive frames, the effect is multiplied many times over. Frames can have geometrically correct or bizarre natural shapes, different sizes. Hang on the wall or set on bedside tables, have a natural color or be covered in bright catchy colors. Doesn't have of great importance a specific type, a huge number of solutions. The ideal option is the one that you personally like, this is the main criterion for choosing a frame design.
	It can be used both in dachas and in city apartments, looks great in baths. On the one hand, you need to thin out the roots a little and make room for clothes. Under the hats, special shelves or hangers are made.
	Recently, the passion for Japanese folk traditions has become very fashionable in our country. You can make an excellent bonsai from driftwood, the technology is simple, the entire composition can be ready in just one day.

Candlesticks and vases

Lamps and fixtures

Decorations

Shelves made of snags

step by stepwai infrombonsai making tutorial

Step 1. Find a small snag that looks like an old tree. It should have a prominent thick trunk and crown branches on the sides. Ignore small branches, they can be cut off later.

Step 2 Clean it of dirt, wash and dry. First, cut off all the excess with a secateurs and form a crown, work carefully, nothing can be glued back.

Practical advice. Washing driftwood is much easier and faster with an old toothbrush. Her villi get dirt out of even the smallest pits and bends.

Step 3 Stir the alabaster. The amount depends on the container in which you plan to fix the snag. Alabaster will hold it and imitate the earth.

The larger the snag, the larger and heavier the base must be to guarantee the stability of the structure. In our case, approximately 0.7–0.9 liters of the finished mass is sufficient.

Remember that alabaster hardens very quickly, first prepare a container for the composition, then there will be no time to look.

Step 4 With one hand, hold the driftwood in a vertical position, and with the other, align the alabaster. If dirty spots of the mass appear on the surface of the driftwood, then they must be immediately carefully removed with a slightly damp cloth. After drying, white alabaster is deeply absorbed into the wood, it is almost impossible to clean the surface.

Wait a bit until the solution begins to set, the snag should hold on its own. Leave the solution alone for full setting, this will take about 10-20 minutes.

Step 5 Prepare special artificial branches of pine or spruce, they are then cut into small branches and inserted into a snag. To make holes, you need to have an awl or a hand drill. The surface of the wood is impregnated with stain, it emphasizes the structure. Prepare small pebbles and a glue gun. It is better to use modern hot, it is easy to work with, and adhesion indicators are quite sufficient for our craft. To improve the design look is done top coat varnish. All these materials must be prepared in advance.

Step 6 With a small brush, paint the alabaster with stain. The material absorbs a lot of water, it will be necessary to cover one place at least three to four times.

Step 7 Saturate the wood with wood stain, here you need to be careful and achieve the most natural color of the wood. Do not make it completely one tone, let there be areas with different shades.

Step 8 With a small hand drill, carefully make holes in the driftwood, fill them with hot glue and immediately insert pieces of artificial needles. Work carefully, do not leave thin threads of glue. They can be removed immediately or after the composition has solidified. The second option is preferable, the threads are easily torn off at the base, hands are not burned.

Step 9 Gradually form the crown of the tree. Do your best to make everything look organic.

Glue gun prices

Glue gun

Step 10 Close the alabaster with moss, attach part of it to the snag. The fact is that in Japan such trees have been growing for many decades, and the trunk is necessarily covered with living moss.

This completes the manufacture of crafts, you can install it in the allotted place and enjoy the results of your labors.

Bonsai artificial from driftwood

step by stepinstructionfor manufacturinghangers

This craft can be hung in a bathhouse or a hunting lodge, in an apartment it looks very exotic and not everyone likes it. This craft is for an amateur, there are never extra hangers. For manufacturing, you will need a rather long snag with a small amount of roots. Additionally, you need to prepare a few twisted branches. The material is needed without bark, it must first be cleaned of dirt and washed thoroughly. specific project there are no hangers yet, decisions will be made as the crafts are made.

Step 1. Fasten a branch with small branches to the snag with long screws, they will act as hooks. Choose the most stable position, the horizontal branch should have at least the spirit of hard stops at the maximum distance from each other. Due to this, the tipping arm is reduced, the hanger is more reliable and stable.

Step 2 In small diameter branches, drill holes for self-tapping screws, otherwise the tree will crack. Driftwood does not have an even wood structure, the roots are always ornate, the fibers are twisted, and there are other natural malformations. Such a tree cannot hold internal stresses; all measures must be taken to prevent their formation.

Step 3 Prepare a small piece of board, pre-sand it and cover it with several layers of varnish. From this board a horizontal shelf will be made. Place the hanger on the table in approximately the position that it will occupy on the wall. Consider how best to fix the shelf. Try several options until you screw nothing.

Prices for cordless drill/driver

Cordless Drill

You need to achieve such a situation that two conditions are fulfilled simultaneously.

The shelf must be securely fastened. Determine at least three branches for the stop, their diameter should allow the existing screws to be screwed in.
Things are stored on the shelf, and for this it must be in a horizontal position. See how to fix it correctly. If there are problems, then change the angle of the entire hanger so that the shelf takes the correct position.

Practical advice. The craft looks the better, the less noticeable any connections. Never plan or saw anything, screw in the screws in inconspicuous metas.

If it is not possible to naturally hide some joints, then drown them in wood, and seal the holes with special putty. But this is an extreme option, experienced craftsmen will always see the place where the putty is applied.

Step 4 Carefully inspect the craft, check the strength of the structure. If wobbles are found, then additionally fix the connections. You can use branches not only to increase strength, but also as additional elements for placing clothes.

Video - Hanger from driftwood

Large snags can be used to make garden benches, tables and chairs, etc. With minimal woodcarving skills, outlandish fairy-tale animals, forest dwellers and wizards are made. The main advantage of such crafts is that there are no two identical products in the world.

Driftwood tables

Crafts from snags can become a real highlight of the interior, obsolete trees get a second chance and delight people for a long period of time. Crafts from snags look great on the background modern styles furniture, but it is even better to arrange a special recreation area from them. Try to make an original composition with your own hands and place it next to the driftwood crafts crafts from branches.

We will talk about crafts from snags. It turns out that branches that are unnecessary at first glance can be very useful to you in the interior or on suburban area. Consider 5 workshops related to making beauty with your own hands.

A rotten tree can be turned into a spectacular decorative element.

How to prepare branches for crafts?

From ordinary unremarkable driftwood, you can make original wood, which will later be used for homemade gizmos. Many craftswomen wonder about the intricacies of preparing this material. The process is simple if you follow a certain procedure. For preparatory activities, you will need the following items (they are in almost every home):

Plastic container.
Soda ash.
Sandpaper.
Linen bleach.

Branch preparation

Take a plastic container and add about half a glass of soda to it, and then pour hot water over this content.
Now you need to send branches into this container and press them down hard - until the wood is completely covered with water. Then you need to put a heavy weight on the tree, which will act as an anchor to keep it under moisture. Leave for two days.
After the process of peeling the branches, you will notice that the wood has a non-uniform color. Now it's time to whiten it. You need to pour bleach into clean water and fill it with water in a ratio of 1:15. The wood is again 100% immersed in the container and left for 48 hours.
Subsequently, the snags are taken out and folded in a sunny place for a few more days. After three days, you will receive products ready for creativity. But while they are very rough, so sharp places are cleaned and polished.

Original photo frame idea

Using branches for furniture

Large driftwood is ideal for creating tables and clothes hangers. Medium-sized raw materials will be the best option for the manufacture of shelves, children's furniture. And small snags will come in handy for individual details. In the manufacture of furniture designs, it is important to take into account some points.

Driftwood must be strong, because they have to take on a colossal load, especially when it comes to pieces of furniture of impressive size.
Raw materials are prepared for work in accordance with the information specified above. They need to be bleached and sanded.
Next, prepare the tools. You will need a drill, a screwdriver, nails for knocking down snags, if the furniture design provides for this. Other equipment necessary to create an original craft is also being prepared.
After the production process, driftwood should be treated again with compounds that prevent rotting and pests. Leave for a couple of days, and then put the piece of furniture into operation.

Interesting specimens with unusual shapes will become an indispensable functional piece of furniture.

Since there are a lot of furniture designs from snags, it is worth using tips for making specific types of furniture.

Lighting

From driftwood, it turns out, you can make a chic lamp! Of course, there are many design options, but we will consider the process and algorithm using the example of a classic product. Whatever we say about its standardity, it will look unusual, but its appearance will allow it to fit into absolutely any interior.

Now - about the order of manufacture. Arm yourself with certain materials and get to work.

Take one large snag (up to 1 m long). It is desirable that it has an interesting shape (curly branches arranged in the original order). Choose the breed at your discretion, but it is best to give preference to oak or needles: the production process will give you a lot of pleasant emotions, and the result will amaze you with its unusualness.

Process the wood according to the first master class, and then make holes in it along the entire length of the base and individual branches at a distance of 10 cm from each other in order to insert decorations into them. It can be metal fittings, decorative stones, ribbon bows.

Prepare the base for the lamp. It can be a purchased item in the form of a regular stand. Then you need to connect the stand and the snag in a convenient way. To do this, you will have to acquire carpentry skills, it will be difficult for a beginner. The thickest part of the driftwood should be located closer to the pallet, and the thinnest part will act as the top.

A decorative braid or rope 20-30 cm long is suspended from the upper part of the structure. On the other side of this thick thread, an electric mechanism will be located, that is, a system for turning the lamp on and off.

So that the light bulb is not “naked”, provide a lampshade for it. This step is up to your imagination. You can make it yourself or buy a ready-made version.

Original panels from snags

If you want to get involved in the process of such needlework, stylish and interesting panels will help you. They are hung on the wall and used as paintings or candle holders, souvenirs. In our case, a master class on making a panel-candlestick will be considered.

Excellent material for creating original items

Prepare a rectangular snag (this can be a log cabin) 30 cm long and 10 cm wide. Process it in accordance with the first master class. This will be the basis of the panel.
Another element is attached across the base. It should have the shape of a parallelepiped and match in length with the width of the base. Fastening can be done with nails or good wood glue.
Then you just have to process the tree and put a candle on the protruding element - your home will be transformed in the blink of an eye!

This is what the original panel looks like. If you follow the given instructions, the result will pleasantly surprise you.

Driftwood photo frame

Do you want to make the interior unique and capture the best moments of your life forever? Why not make a photo frame out of driftwood? To do this, you only need a couple of small twigs and good glue. The branches must be carefully prepared in accordance with the first master class, and then proceed to the main part of the work.

First, the canvas itself is made. This is a block of wood 2 cm thick. The length and width are determined by the size of the photograph (9 * 13, 10 * 15 cm, and so on). Please note that these indicators should be with a margin of 2-3 cm, so in fact you will need a beam of 12 * 16 cm or 13 * 18 cm, respectively.
The canvas is processed with sandpaper, covered with compounds against decay and damage. Then a photo is placed on it face up, and small branches are superimposed along the perimeter in an indent of 2-3 cm and fixed with glue.
If you want to diversify your picture, you can put not just twigs, but snags painted in different colors. The posting order is determined by the author.