Electric convectors. Electric convectors Convector dantex sd4 15 delivery
Convectors - the best option to warm up any room
Air circulation occurs naturally
The principle of operation of a converter-type heater is elementary. The cold air below is in contact with the heating element. After that, it tends upwards, and special blinds on the convector body regulate the direction of this flow towards the ceiling (at an angle of 45°). After the air cools, it goes down and is again in the heater. In this way, air is quickly and naturally circulated in the room and the desired temperature is set.
Simple and fast installation
The outer bracket is fixed very simply and makes it possible to quickly mount the convector on the wall.
On the bottom of the heater, stable legs are easily mounted (or legs with wheels of the SD4 series)
Advantages
1. Saves electrical energy
An efficient heating element together with an electronic thermostat makes it possible to significantly save electrical energy. Continuous and careful monitoring of the temperature in the heated room, absolutely eliminates the possibility of excessive heating, and therefore extra costs electrical energy. Dantex heaters use exclusively high performance heating elements with an efficiency of over 90%.
2. Security
Dantex convectors are protected against fire and overheating. The dust and moisture protection class of such heaters is IP24, which meets European standards. The body of the heater does not heat up to temperatures dangerous to humans.
3. Versatility
The heater is used both as an additional and as a main heating unit so there are two ways to install. If you use a heater as an additional heat source, then you need wheels. In case of installation of the convector for a long time, it can easily be installed on the wall.
4. Rapid heating of the room
As a result of the design features heating element and the heater body quickly reaches the best temperature. After a couple of minutes, the convector enters the operating mode, and after a short period of time the room warms up. Such effective work is the result of air circulation in a natural way.
5. Comfortable and healthy microclimate
Sudden changes in temperature adversely affect well-being. As a result of the use of "Intelligent Thermostat" technology, the temperature level in the room is kept very accurately. The heating element provides all parameters for wellness, as it works without burning oxygen and does not dry the air environment.
6. Reliability
We control every step of the production stage and as a result we guarantee the highest level of quality. The reliability of Dantex heaters is confirmed by a two-year warranty.
7. Accurate temperature control
An electronic sensor monitors even small temperature fluctuations (up to 0.1 ° C) in the room. Information data from it is transmitted to a digital control unit, which, after analyzing the received information, turns on or off the heating element. As a result, we have a stable temperature in the room.
Technology
A digital control unit using Intelligent Heating technology protects your comfort every day. Sensor high precision continuously supplies the electronic thermostat with data on temperature fluctuations in the room. The digital control unit, analyzing this data, turns the heating element on or off. The convector works exactly until the moment when the temperature in the room reaches the desired value, and then turns off. Along with saving electrical energy and creating comfort for you, this allows you to make the convector an absolutely autonomous unit. Built-in protection means do not turn off the convector, even when no one is at home.
Designers and technical specialists Dantex has developed a special line of convectors that meets the highest requirements of the consumer market in this area. The design and principle of operation of Dantex electric heaters are based on Hi-Fi developments in the field of thermal equipment.
The latest hidden tungsten heating element with X-shaped fins avoids overheating, does not burn oxygen, has a maximum heat transfer coefficient to air, corresponds to the moisture protection class - IP 24, absolutely silent. The latest painting and finishing technologies, such as electrostatic painting and galvanized processing, make electric heaters very smooth and almost permanently protected from corrosion.
The convectors are easy to operate - with one click on the key, the required heating temperature is set, which is displayed on the display. An electric convector saves your money as much as possible, works with an efficiency of more than 90%, and the error in maintaining the air temperature in the room is ± 0.4 °C. Light weight, compactness, mobile placement and price make it affordable for any buyer.
Advantages of Dantex electric convectors
|
1. Save electricity
|
|
|
|
|
|
|
|
|
|
|
|
|
2. Security
3. Versatility
4. Rapid heating of the room
5. Comfortable and healthy microclimate
6. Reliability
7. Accurate temperature control
Tags:
Specifications:
- Does not burn oxygen
- Smart thermostat
- LED display
- Setting the temperature in 1C increments
- Electronic thermostat
- X-Silence heating element
- Silent heating
- overheat protection
- Auto Restart Function
- Universal installation
- Ingress protection class IP24
- Timer
- Legs included
X-silence- new generation heating element. Its efficiency is over 90%. A special alloy and design made it possible to create a heating element with the same coefficient of thermal expansion along the entire length. Heat is quickly and evenly distributed over the surface of the heating element - this significantly reduces heat loss, and also prevents the combustion of oxygen and dehumidification of the air. The X-shaped shape of the heating element made it possible to increase its total area, and as a result, to increase the heating efficiency.
Easy and fast installation:
Power selection:
Choosing a convector is very simple:
1000 W of power per 10 sq. m of the room, if the convector is the only source of heat.
600 W per 10 sq. m of the room, if the convector is an additional heat source (the main one, for example, is central heating).
Based on: apartment panel house, double glazing, ceiling 2.70 meters
Advantages:
1. Saves electricity
An efficient heating element in combination with an electronic thermostat allows significant energy savings. Constant and accurate control over the temperature in the room, completely eliminates the possibility of excessive heating, and as a result, excessive energy costs. Dantex convectors use only high-performance heating elements, the efficiency of which exceeds 90%.
2. Security
Dantex heaters are equipped with protection against overheating and fire. All convectors have a dust and moisture protection class IP24, which meets all European standards. The body of the convector never heats up to dangerous temperatures for humans.
3. Versatility
The convector can be used as an additional or main heating system, so we have provided 2 installation methods. If you are using a convector, the casters will suit you as an additional source of heat. If long-term installation is required, the convector can be easily placed on the wall.
4. Rapid heating of the room
Thanks to the special design of the heating element and the convector body, the optimum temperature is reached as quickly as possible. After 2 minutes, the heater enters the operating mode, and after a while the room will be warmed up. This efficiency is achieved due to natural air circulation.
5. Comfortable and healthy microclimate
Temperature fluctuations always have a bad effect on well-being. Thanks to the Smart Thermostat technology, the temperature in the room is maintained very accurately. And the heating element does not dry the air and does not burn oxygen, creating all the conditions for excellent well-being.
6. Reliability
We control every step of production and therefore we can guarantee the highest level of quality. The reliability of Dantex convectors is confirmed by a 2-year warranty.
7. Accurate temperature control
An electronic sensor detects the slightest temperature changes (up to 0.1°C) in the room. Information from the sensor enters the digital control unit, which, analyzing the received data, turns the heating element on or off. This ensures a stable room temperature.
1. Saves electricity
An efficient heating element in combination with an electronic thermostat allows significant energy savings. Constant and accurate control over the temperature in the room, completely eliminates the possibility of excessive heating, and as a result, excessive energy costs. Dantex convectors use only high-performance heating elements, the efficiency of which exceeds 90%.
2. Security
Dantex heaters are equipped with protection against overheating and fire. All convectors have a dust and moisture protection class IP24, which meets all European standards. The body of the convector never heats up to dangerous temperatures for humans.
3. Versatility
The convector can be used as an additional or main heating system, so we have provided 2 installation methods. If you are using a convector, the casters will suit you as an additional source of heat. If long-term installation is required, the convector can be easily placed on the wall.
4. Rapid heating of the room
Thanks to the special design of the heating element and the convector body, the optimum temperature is reached as quickly as possible. After 2 minutes, the heater enters the operating mode, and after a while the room will be warmed up. This efficiency is achieved due to natural air circulation.
5. Comfortable and healthy microclimate
Temperature fluctuations always have a bad effect on well-being. Thanks to the Smart Thermostat technology, the temperature in the room is maintained very accurately. And the heating element does not dry the air and does not burn oxygen, creating all the conditions for excellent well-being.
6,Accurate temperature control
An electronic sensor detects the slightest temperature changes (up to 0.1°C) in the room. Information from the sensor enters the digital control unit, which, analyzing the received data, turns the heating element on or off. This ensures a stable room temperature.
7, X-silence- new generation heating element. Its efficiency is over 90%. A special alloy and design made it possible to create a heating element with the same coefficient of thermal expansion along the entire length. Heat is quickly and evenly distributed over the surface of the heating element - this significantly reduces heat loss, and also prevents the combustion of oxygen and dehumidification of the air. The X-shaped shape of the heating element made it possible to increase its total area, and as a result, to increase the heating efficiency.
