Grabber fishing umbrella make do-it-yourself drawings. Grabber - it's simple

Many of us have some kind of hobby. For some, this is travel, someone is fond of horse riding, and someone likes fishing. Much for fishing you can do yourself from improvised means. The main thing is to approach the process responsibly and make a little effort.

Grabber is a fishing tackle

A fishing tackle called a grabber is an active tackle that consists of a float, fishing line, wings and four springs. The method of catching fish is quite simple. You need to carefully arrange the gear and settle nearby, waiting for the fish to hit it and hit the side wing. Then quickly, with a jerk, you should lift it up. The mechanism is designed so that the fish will either get tangled in the wing or be caught by the existing lift.

This method of fishing is used all year round. A grabber is a tackle for catching river fish that does not hibernate and moves in a pond. In addition, you can fish around the clock. For use additional lighting. For example, crucian carp is very easy to lure by illuminating the hole with a flashlight.

Do-it-yourself grabber - it's easy

Despite the abundance of various kinds of fishing gear, many fishermen use tackle of their own making. And the quality of fishing does not suffer from this. It should be noted right away that the grabber is a fairly simple and convenient tool that is easy to make with your own hands.

What you need to make a grabber

The secret of its production is quite simple. We will need:

Network cloth;

Network scaffolding;

Insulating tape on a cloth basis;

Springs - 4 pcs;

Small wire ring;

Lead sinker;

Float;

A thread net with a small cell diameter, approximately 0.3 cm, is taken as the basis. For triangular wings, it is better to take a stronger, fishing net, because the main blow falls on the wings when catching fish. In order for the grabber to successfully slam shut without getting tangled in the springs, they are wrapped with electrical tape. It is better to take the one that is on a fabric basis, unlike synthetic, it can withstand the cold. We build 4 rods from the fishing line, fix each one at the ends of the bars, freely stretching them through the side cells. At the top, all the rods are brought together in a wire ring, fixing in the float hole. A traction cord is also attached here - with its help you can control the tackle. Another important element of tackle called a grabber is the springs that are attached to the central load. Sinking to the bottom, the tackle due to the load should open up and take a horizontal position. And when a fish gets into it, it slams shut sharply when lifting and does not let the prey escape.

It is also necessary that the rods slide freely, without clinging or tangling. It is better to choose a load from lead, and its weight should take into account the depth, the size of the tackle and the current. The ends of all four springs should be at the base of the sinker. A line is attached to it.

As you can see, a do-it-yourself grabber is quite simple to perform. The main thing is to take into account all the recommendations and use the necessary material correctly. Then fishing will be successful and will bring not only a good catch, but also the pleasure of the process itself.

Many fishing enthusiasts devote all their free time to fishing. At the same time, anglers who are in love with their occupation are engaged in the manufacture of fishing tackle, such as baits, tackle, etc.

In the process of fishing, some silicone lures lose part of their bodies, and it is a pity to throw them away after that. If you collect several processed silicones, then you can make new working baits from them.

Manufacturing technology

1. In the prepared container, gypsum is diluted to a state of thick sour cream. After that, old vibrotails or twisters are dipped into the solution to get templates, after the gypsum has hardened, the baits are removed very carefully so as not to damage the mold. If there are any irregularities, then they are smoothed out with a sharp thin object.
2. The form prepared in this way is thoroughly greased. The most suitable option is sunflower oil. This is necessary so that the finished product does not stick to the mold during the manufacturing process.
3. All mold casting operations should be done outdoors or in a well-ventilated area.
4. Old, used silicone products are crushed into pieces and placed in a dish that is heated on a stove. So that the silicone does not burn, it must be stirred regularly, while the fire should be at a distance of 15-20 cm from the silicone container. If dyes are added to silicone, then you can get the bait of the desired color, and if you add flavoring, then this will already turn out to be edible silicone.
5. The well-heated and carefully mixed mass is poured into a mold. If you plan to get a two-color bait, then each new layer is poured after the first layer has dried.
6. After about 15-20 minutes, when the silicone has cooled down, the finished bait is removed from the mold, the mold is cleaned, lubricated with sunflower oil and the process is repeated.

Almost always, when catching fish, you need to quickly and quickly change the bait or modify the equipment by changing the leash or feeder. For these purposes, there is a fastener design, a rather small size. Making it at home is not difficult.

Manufacturing technology

1. The following tool is required:
   • wire cutters;
   • round teeth or pliers;
   • tweezers.
2. The basis of the material can serve as a large bracket from the stapler.
3. The wire is bent with pliers into a shape that looks like a paper clip, but smaller.
4. Excess ends are cut off with wire cutters.
5. A cambric of the appropriate size is selected so that it fits freely on the fastener.
6. The size of the cambric should be slightly larger than the fastener, so the excess is cut off.
7. A piece of cambric is put on a fishing line and fixed with a knot.
8. Any bait is attached to the other end of the mini-fastener, after which, with effort, the cambric is pulled.
9. Mini clasp, ready to use.

For those who constantly fish from a boat, it will be useful to have a simple but effective feeder. It is useful if you have to fish on a river where there is a current. To do this, you will need the following elements:

• a piece of plastic sewer pipe;
• two fasteners;
• lead;
• electric drill;
• rope, rivets;
• loop and lock.

A piece of pipe is taken, up to 30 cm long, and plugs are installed on both sides. One of them is installed deafly, and the other in such a way that it can be easily removed. After that, holes are drilled over the entire surface. A rope is attached to the plug that opens. To prevent the plug from opening on its own, a lock or latch of any design is installed.

On the reverse side, where the plug is rigidly fixed, the weights should be fixed.

The feeder sinks to the bottom on a rope and stays there until the end of fishing. Thanks to the drilled holes, the bait is slowly washed out of the feeder, which allows you to keep the fish at the fishing point.

Any spinning player wants to have a good, catchy wobbler, but not everyone can afford to buy one. As a rule, wobblers are expensive baits, especially if they are related to well-known manufacturers.

In this regard, some anglers have mastered, and very successfully, the manufacture of wobblers at home. This is a very interesting and exciting process that does not require special equipment and tools.

How to make a wobbler

1. To begin with, you should decide on the shape and color of the future bait. To do this, you will have to do art and draw a sketch of the future wobbler on paper. Regardless of the material of manufacture, the wobbler is made of 2 symmetrical parts. A reinforcing wire should pass inside them.
2. Styrofoam can also serve as a material for manufacturing, but it is not as durable as wood or plastic. Therefore, taking the necessary material, they are engaged in the manufacture of blanks.
3. From thin stainless steel, fasteners for the ring and tee hooks are being prepared. Mounts are mounted in specially cut out places placed on the body of 2 halves of the lure. the two halves are joined with glue. After the glue dries, a cut is formed for the front blade, after which it is rigidly attached using the same glue.
4. After that, the wobbler should be configured based on personal preferences.
5. All recesses or voids left on the bait are sealed with epoxy, after which the bait is sanded and prepared for painting. Painting is also carried out depending on the presence of your own imagination.

It is not at all difficult to make a spinner yourself, if you have at least some skills in working with tools and materials. For its manufacture you will need:

• ordinary paper clip;
• tee (hook);
• metal plate, 0.5-1 mm thick;
• not a big bead;
• piece of sheet lead;
• tools: file, pliers, needle files, scissors.

First, on a piece of cardboard, you need to draw the shape of a petal for the future bait, after which the drawing is transferred to the metal. Scissors are taken and a petal is carefully cut out of a piece of metal. After that, the cut petal is processed with a file so that there are no burrs. Two holes are drilled along the edges of the petal (one from each edge) and processed with needle files. The places where the holes are drilled must be bent 90 degrees in relation to the petal. Then you need to take the wire and align it, and at one of its ends you need to form a loop and fix the tee.

After that, a petal and a bead are put on the same wire, after which, a loop is again formed at the end of the wire for attaching the fishing line. Moreover, the loop must be made so that it does not interfere with the free rotation of the petal.

The spinner requires adjustment by additional loading. The lead weight is placed between the tee and the tab. Again, you need to calculate everything correctly so that the load does not interfere with the rotation of the petal. The last step is painting the petal.

Arriving for fishing, you have to spend a lot of time catching live bait. The fact is that in the summer it is very difficult to store live bait: it quickly dies in any container, and the live bait must always be vigorous. A device made from 2 plastic bottles will help solve this problem:

1. A 2-liter plastic bottle is taken, in which the neck is cut off to half.
2. After that, the neck is cut off from the same side in the widest part.
3. The result is a piece that looks like a watering can.
4. The bottom of this bottle is cut off.
5. The second bottle is taken and the bottom is cut off from it, at a distance of 5-7 cm from the greatest thickness.
6. In conclusion, the structure is assembled together. The cut-off "watering can" is inserted back, but only on the contrary, with the thinnest section inward, after which the structure is firmly connected with artificial threads. Another bottle is taken and the cut end is put on the first bottle with a neck.
7. A weight and a rope are attached to the trap.

After that, you can place the bait in the trap and lower the trap to the bottom of the reservoir. Fish that fall into the trap will no longer be able to get out of it. If you need a live bait, you just need to pull the trap out of the water. In order for the fry to always be fresh and lively, the trap must be kept in the water, moreover, indefinitely.

In winter, the most common tool for catching a predator (pike) is using vents. It turns out that it can be done quickly and easily:

1. The basis for its manufacture is a sewer PVC pipe, 32 mm thick. The pipe must be cut into segments, 10-15 cm in size.
2. All irregularities in the places of cuts are best processed with a file.
3. 3 holes should be made in the pipe. Two holes are made on one side, one opposite the other, to install on a tripod, and one hole is made on the other side for the line stopper. Its diameter is 1 mm.
4. In the form of the letter P, a stopper for the fishing line is formed and threaded through a small hole. The stopper should not limit the free movement of the fishing line.
5. A ring is formed from a fishing line with a thickness of 0.4-0.5 mm, which is passed through two holes located opposite each other. This ring will serve as a kind of fastener. The vent is attached to a metal rod securely driven into the ice.
6. About 10 meters of fishing line is wound on a piece of pipe.
7. An appropriate weight and a hook, such as a tee, are attached to the end of the fishing line.

The zherlitsa is ready for use by the end of the pipe, red tape should be fixed at the point of suspension (attachment), which can serve as a bite indicator.

Making bait for carp

Crucian, the average carp that most anglers catch, prefers the bait from semolina prepared according to a special recipe.

Recipe for making a catching nozzle for crucian carp:

• Water is poured into the dishes, a couple of drops of flavoring are added, and brought to a boil.
• Semolina is poured into boiling water with constant stirring. The result should be a homogeneous thick mass.
• The fire is turned off so that the porridge cools down and steams out.
• Upon reaching room temperature, the porridge is kneaded with hands to obtain even greater density.
• After that, the porridge is wrapped in several layers of gauze.
• It is not recommended to wrap porridge in polyethylene.

Balls are well molded from the finished porridge, after which they are put on a hook.

The recipe for making porridge bait in a cold way:

• Water from the reservoir is collected in a suitable dish and a little flavor is added.
• After that, semolina is added to the dishes with active stirring.
• As a result of active stirring, a homogeneous mass should be obtained. The readiness of the bait is checked as follows: if the spoon with porridge is lifted up and turned over, then the porridge should remain in the spoon.
• Stirring is stopped and the porridge is left for 10 minutes to swell.
• In conclusion, you need to take a syringe and fill it with porridge.

The porridge from the syringe is squeezed out onto the hook in a spiral so that the sting of the hook closes last.

• Following. Fishing tackle - HAPUGA, cracker, folding spider, VERY catchy Far Eastern tackle. Cross for a winter spider. (Winter Spider) - Duration: 4:1*** Fishing with Kuzmich 23,533 views.
  https://www.youtube.com/watch?v=zEnfWwqUsDI
• Grabber - winter fishing tackle... We present to your attention the winter fishing tackle Grabber. The video shows how the tackle works... Added 3 years ago Grabber, cracker, cotton, spider, fishing... Demonstration of fishing tackle Grabber for winter ice fishing. Added 2 years ago. Channel: Azov-Nevod.
  http://www.fassen.net/show/Grabber winter tackle
• We present to your attention the winter fishing tackle of the Grabber. How to make a hunting paraffin heating pad - Duration: ***:35. Hunter 2,241 views.KVH SovKhakassia Winter fishing. Perch on a grabber. - Duration: ***:32. morfiy_1*** 1.7***0 views.
  https://www.youtube.com/watch?v=9RiK94Xd_0g
• AZOV NETWORK | Grabber fishing umbrella, winter tackle (azovseti.ru) Phone number--***-***0***-431-1***-***2 Mail -- [email protected] Website - Azovseti.ru. Added 2 years ago. Channel: Igor Volg...Grabber, cracker, cotton, spider, fishing... Demonstration of fishing tackle Grabber for winter ice fishing.
  http://www.fassen.net/show/Fishing tackle umbrella
• Demonstration of the operation of Grabber fishing equipment for winter ice fishing.
  https://www.youtube.com/watch?v=4U4GRsleyGs
• Winter fishing tackle Grabber from Azov-Nevod. We offer you to get acquainted with the principle of action of the winter fishing tackle Grabber.
  https://www.youtube.com/watch?v=uj4kO5i4miI
• The principle of operation of the winter fishing tackle Grabber! Grabber, cracker, cotton, spider, fishing tackle. AZOV NETWORK | Winter tackle grabber umbrella (azovseti.ru). Aliexpress buy fishing tackle grabber. how to catch a feeder on a Chinese net. KVH SovKhakassia Winter fishing. Perch on a grabber.
  http://portall.zp.ua/?c=video&q=grabbing winter fishing tackle
• You were looking for how to make a fishing grabber. Fishing tackle - HAPUGA, cracker, folding spider, VERY catchy Far Eastern tackle. WATCH Time - 12:02, Liked - 21, Disliked - 0. How to make a grabber with your own hands at home. KVH SovKhakassia Winter fishing. Perch on a grabber.
  http://czbeerclub.ru/search/how to make a fishing grabber
• KVH SovKhakassia Winter fishing. Perch on a grabber. - Duration: ***:32 morfiy_1*** 2 ********* views.Grabber, firecracker, cotton, spider, fishing tackle - Duration: 3:26 Dexp-tungus Fishing Troops 57,277 views.
  https://www.youtube.com/watch?v=kmgiXJLjm84
• How to make a grabber for catching fish. Fishing tackle - grabber, cracker, folding spider, VERY catchy Far East tackle. Grabber, cracker, cotton, spider, fishing tackle. Fishing, Poachers, TOP-10 Poaching methods of fishing. winter spider for catching live bait Tests.

In order to have a good time fishing and return home with a good catch, lovers of such a holiday buy expensive fishing rods, lures, and technical equipment. But using homemade or factory-made fishing tackle of a grabber, you can achieve results with little investment.

A specialized fishing product vaguely resembles a lift or a fishing spider. These tackles consisted of a frame made of metal and a stretched net. The product was lowered into the water, waited for a while and quickly pulled out. But these devices for catching fish were large, and the process of catching was stretched over time. The grabber has a more complex design, but the efficiency of fishing with this trap increases. The product also has other names: cotton, cracker, umbrella.

What elements does

The composition of this active gear may vary depending on the specifics of use. At the base of the product is a load of sufficient weight made of lead. Knitting needles made of thick wire are attached to it. You can use springs of a similar material or weights at their ends. The structure is immersed in water by means of rods made of strong fishing line. The whole system is equipped with a nylon mesh. You can use a net of fishing line. To simplify the operation of the trap, it is supplemented with a float.

Where and when to catch a grabber

This device is especially popular in the Far East, fishermen in Siberia are also satisfied with the effectiveness of the tackle. The main reason is the versatility of cotton: the trap is used around the clock and at any time of the year. Grabber fishing in winter is no less popular than in summer. The only caveat is that when fishing at night, proper lighting is important. A simple flashlight is enough to attract the attention of a crucian.

The grabber should be used to catch river and lake fish that are actively moving in the reservoir. Don't count on hibernating prey. If you choose the wrong place, you can fish for a long time and not catch it - fishing with a grabber in a river with a strong current is ineffective.

Technique and tactics

The advantage of fishing tackle umbrella in the utmost simplicity. The product sinks to the bottom of the reservoir. If fishing occurs from the shore, then it is better to do this with a long pole. The fish swims into the trap and catches the wings of the tackle. It is easier to notice the appearance of prey if the cotton is equipped with a float. It remains only a sharp movement to get the net out of the water. The principle of operation of the grabber lies in the design features that do not allow the fish to get out of it. To increase your fishing catch with your umbrella-grabber, you need to follow the float and quickly raise the tackle with your hands.

Some fishermen prefer to use echo sounders, but if you act carefully, then a trained fisherman's instinct will be enough for a good catch. Important nuances:

• with possible large prey, it is better to fish with gloves;
• more loot can be obtained in the usual place;
• circular movements of the current contribute to an increase in the catch.

Too strong a current or a lot of silt at the bottom can make fishing very difficult.

How to DIY

Tackle can be purchased at specialized stores. A number of additional design features allow factory grabbers to lose the shortcomings of home-made models. But with the use of quality materials and attention to detail, you can make grabbers for winter fishing or all-season gear yourself. Since cotton is one of the simplest products for fishing and is easy to use, it will not be difficult to construct it.

Materials and drawings

Before you make an umbrella for fishing with your own hands, it is better to familiarize yourself with the drawings or watch a few training videos. In this case, it will be easier for you to correctly compose a reliable tackle from the elements. The main set of demanded materials for grabbers includes:

• strong network of nylon or fishing line;
• four springs;
• lead cargo;
• fishing line, cord and cloth tape;
• compact ring of wire.

You can add a float to this list. A thread net is the basis, and a net made of fishing line is more suitable for wings. It is necessary to wrap the springs with electrical tape to prevent improper slamming of the gear. Isolated grabber springs are attached to the load. Rods should be stretched through the side cells, and 4 rods should be tied to them. The rods are connected in the upper part of the product by means of a ring and threaded into the float hole. This is where the pull cord is attached.

Grabber Disadvantages

Despite the extensive list of advantages, this gear also has negative properties. The product must sink to the bottom of the reservoir, which complicates the extraction of fish at a significant depth. The catch is limited to species that do not hibernate and spend a lot of time in motion. A handmade seine-grabber often turns out to be sensitive to the current - the product does not fully open. If the bottom of the reservoir is covered with a layer of silt, the fishing process will be significantly complicated.