How to make a table from an old door. What can be done from an old door (39 photos)

We cut out the middle from the main body, so that the frame remains and preferably without damage to the surface. Paint with wood varnish to match the color of the interior of the apartment. Apply several layers for a more mysterious look.

Important! Insert the mirror carefully. Then fix it however you like. For example: use the triangular option.

You can cut the base for the table in any shape. Let's say we chose the shape of a circle, which means we make the legs like three in one.

Important! You can use a screwdriver to fasten the legs into one, under the base of the table. This method is less visible from the outside. Use design drawings in the center, the theme can be about coffee and any other.

From door leaf making a shelving is very easy. Remove glass if present. If the format is solid, then we saw inside, as it were, a window of the old form. We decorate to your liking. For example, we glue it with suitable paper or special wallpaper. We use the rack at our discretion: for books, toys, exhibition options, etc.

For wall decor we use old doors. Imitates a recess by inserting mirrors. On the sides of the inner side, mirrors are attached along the entire length. Then you can attach any small drawing. Double-sided reflections in the form of an overlap are a bewitching sight. The effect is amazing.

We insert photographs of suitable size into places for glass. We mount the door on the wall, like a big picture.

Attention! Don't forget to remove the hinges.

We fasten several doors together in the form of an accordion. We install in the required place for a portable screen. We do not change anything, except for achieving the same color. Let's just do a restoration.

Important! Fasten with hinges.

From the two doors you get a bench in the hallway. We use the first one as a whole, install it in a standing position against the wall and fix it. Then from the other we build a closed-type bench on the side front side. We connect with the main form.

Important! Use the void for shoes.

We fasten the door to the bed itself at the head in a standing position: it will give a dummy cabinet. And if you fix it sideways, it will turn out like a big back. The color background must match the color of the bed.

Use the wall organizer in the kitchen for household utensils. We fix the integral form or use front door. We paint in any color. We attach different hooks to it and hang kitchen utensils. Great way to save space.

From wood panel any shape you can make a watch in the form of a canvas. On the front we write the numbers 12, 3, 6, 9. We attach arrows to the front.

It is done simply. For example, fasteners are attached to the case from four sides. Next, make a rack with supports. Connect in the supine position. Indispensable for relaxing in the garden.

Six doors will make a beautiful gazebo. Connect the edges to each other in any shape. Make the entrance free or closed. Make the top out of door panels. Use bright colors for painting. This will give you a festive mood.

Put in one row and connect tightly to each other without gaps. It can be fixed to the pole supports on the crossbars. Decorate the top with a triangular cut.

You will need a few. Assemble in the form of an opening cabinet. Rectangular shape. It will turn out a good and durable block for storing garden tools.

Build a shelf for pots in 30 minutes: Divide the door into equal four parts. We connect the bottom with the sides and the back side. It is recommended to use the standard view. The shelf will look original and unusual.

We attach hooks and a beauty mirror to the finished base. For a strong support, use the connecting parts.

You will need 3 pieces. We split one door in half. The rest are left whole. We fasten so that we get a rectangle. We fill the earth inside. The greenhouse is ready.

Reference! It is best to use the option with glass for the lid.

How to do coffee table from old doors with their own hands. Most often, during repairs, old doors are replaced with new ones. In a normal situation, they are left with one place, in a landfill. At best, they try to use doors somewhere in the country, although, as a rule, they are not used in the country.

Meanwhile, lovers of antique unique things pay a lot of money to find and buy original products. Here, after the repair, there was an old glazed door. Although there is only one door, it is double-leaf, it was just enough to assemble a unique coffee table. In addition, there was a use for the vertical bars of the box, for use as prolegs.

This table design is universal and suitable for doors of any design and size.
As I said, in this version there were two narrow glazed doors, but in terms of size, the doors were originally double doors.

First we need to decide on the details:
To assemble the structure, we need to make a tabletop, two legs in the form of solid sidewalls and longitudinal rods that fasten the legs. These longitudinal bars between the sidewalls are called "prongs".

We saw off the lower paneled part from the doors so that the trim of the glazed part remains intact. Roughly speaking, details are obtained in the form of window frames.
Since the doors in this case are quite narrow, only 400 mm. , then to assemble a wide tabletop, we connect two glazed parts with each other with edges. Approximately width of a table-top can be 500-700 mm. , length 1000-1400 mm. , table height assembled 600 mm. , although the height can be in the range of 450-600 mm. .

There is also a more complicated way, to disassemble the doors and assemble a new tabletop trim from the parts. But I know from experience that without serious carpentry skills it is difficult to assemble a more or less decent structure.
But this is a special case, if the door is an interior door, of the usual width, then you don’t need to be smart. Just take a sawn off piece of canvas as a tabletop.

Fastening the prolegs to the legs can be done in two ways: On a flat or round spike, where the spike is cut out at the ends of the prolegs, and we make nests on the inside of the sidewalls. Or tighten the parts with through screws, through the sidewalls to the ends of the prolegs. There will be little use from frail thin self-tapping screws, or take euro screws, or long self-tapping screws with a large hat. To prevent the parts from splitting when tightening, it is necessary to pre-drill the holes for the screws by 1/2 or 2/3 of the length of the self-tapping screw.
The head of the screws is recessed, then puttied for painting, or closed with plugs. Another homemade design, a table.

An important stage of work, on which depends appearance products, this is painting.
Before painting, it is necessary to clean the old coating, putty the cracks and, after the putty dries, sand the surface.

If the old glazing bead holding the glass has burst, then it is better to replace it with a new one.
Then there is painting, it is difficult to sand old products so that they can be varnished. It is better to use an opaque paint, such as acrylic, including modern water-based acrylic and polyurethane paints.
After applying two or three layers, with each layer drying, apply a layer of colorless varnish over the paint. This will give the necessary gloss to the product.

(Visited 93 times, 1 visits today)

Dinner table

If the door that you had to replace has not yet lost its external gloss and is made of a sufficiently durable material, it is perfect as a countertop for a spacious dining table. You just have to attach legs to it, choose a piece of glass that fits the size, and voila! - stylish item home interior, which no neighbors can boast of, is in front of you! You can call guests, a lot of them will fit at such a table.

Such a table will perfectly fit into the space, decorated in a rustic style, will become an interesting component garden furniture, and maybe find a place in the country.

Corner rack

If you do not have a lot of space in the apartment, you are probably no stranger to striving for the maximum functionality of home furnishings. This is greatly facilitated by the competent use of corners where cabinets or shelving can be placed. solve By the way, from a door that is no longer used for its previous purpose, you get an excellent corner rack - an extremely convenient and functional thing, ideal for storing all kinds of items.

Dressing table

A cute dressing table with a mirror is probably the last way you could imagine an old door. And yet, this is a great option to give her a second life. Such a piece of furniture will fit well into a space decorated in a romantic and elegant style.

Hallway furniture

Simple manipulations, during which you can attach hooks, a drawer and a seat to the door, will allow you to get comfortable furniture for the hallway. Since there is usually relatively little free space at the entrance to an apartment, it is important to introduce concise solutions here, one of which may be your innovation.

Kitchen sideboard

An old door is a piece of history, and some people really appreciate such items. From the door you will get a magnificent kitchen sideboard - slightly shabby, but able to give the room comfort and special warmth. A little effort - and in front of you is an interesting and practical piece of furniture!

bookcase

An old door is a non-standard solution for those who do not know where to put their books. All you need is, in fact, a door, a few shelves, tools and, of course, patience and a desire to create.

Hanger for outerwear

Perhaps you had to replace not one, but several doors, and you kept the handles as a memory of them? If so, these details can be used to make a hanger for outerwear. It is doubly wonderful if you manage to use the door itself as a base - and the original piece of furniture is ready. It remains only to figure out how to decorate a newly made hanger - vintage pictures or, for example, family photographs are suitable for this.

Roomy swing

If you live in a house with a garden, an item like a swing is a must! Swings are rest, relaxation, the opportunity to enjoy the beauty of the surrounding views and many positive emotions. Maybe you should not throw out the old door? Better spend some time and build a swing out of it!