How and with what to wash oil from different surfaces. Fir oil for wrinkles on the face: effective and proven recipes How to wash spilled fir oil

Fir has always been revered by the Russian people as a tree-healer. At colds, cough, sore throats helped infusions of needles and young shoots, lotions treated sore joints. Hunters, who left their homes for many months, got rid of scurvy with a decoction of twigs, cones and fir bark. helped with sprains and bruises. And a bathhouse with a fir broom put any patient on his feet.

The healing properties of fir oil, its use in the treatment of various diseases are described in the writings of Hippocrates. Modern traditional and ethnoscience fir oil is also used.

Fir oil is produced in several ways. Each of the methods has its pros and cons.

  • laying of raw materials;
  • steam distillation;
  • upholding;
  • vacuum distillation;
  • filtration.

Under high pressure hot steam passes through the raw materials, collects the essential components and takes them away. As the steam cools, it separates into water and oil. The process from the laying of raw materials to the receipt of finished products takes at least 8 hours. Today, devices have been invented that allow speeding up production, however, with fast production, there is less oil left in the oil. useful substances, its smell and quality deteriorate.


Raw material

To obtain a quality product, it is necessary to use raw materials that meet certain requirements.

For the manufacture of fir oil, they collect:

  • green cones,
  • young shoots,
  • spruce branches (branches with needles) no more than 8 mm thick,
  • needles.

Fir has been growing for about 300 years. Very young plants (up to 1 m) do not contain the required amount of volatile substances, therefore you need to choose trees from 1.5 to 2 meters tall. It is better if they grow in a sunny clearing, have a well-developed crown.

Cannot be collected spruce branches from trees growing near the road. Pay attention to the bark of the tree, if the bark is smooth, even - the fir is healthy, and if it is covered with moss, damaged by harmful insects - it is better to bypass such a plant.

Raw materials prepared for the future are well stored and do not lose their qualities for several months.


When is the best time to harvest raw materials?

Of all ether-containing coniferous plants, fir has the largest percentage (from 1.5% to 3%) of ester-oil substances. In winter, during the dormant period, their number decreases. The best time procurement of raw materials May-September. In May-June, young shoots and the ovary of cones are harvested. In July-September spruce branches and needles.

Harvesting should be carried out in dry, sunny weather. If the spruce branches are wet, it must be dried well in a ventilated area, in the shade. Store spruce branches tied in several pieces, in a hanging position.

How to make at home

There are several ways to prepare fir oil at home. You can cook it in a hot way: in a water bath, in a microwave oven or in an oven. cold way manufacturing - insisting in a dark place.

  1. To make butter according to this recipe in May, when active plant growth begins, we collect young shoots, no more than 4-5 cm long, buds (ovary of cones), needles.
  • We cut the shoots into three parts, the kidneys in half.
  • We take half-liter jars, put the prepared raw materials (fill 3/4), fill with refined oil.
  • We close the jars with foil, in which we make 2-3 holes.
  • We heat the oven to 150 degrees, put the jars on the grate. After 2 hours, reduce the heat to 60 degrees and leave to languish for 10 hours.
  • Turn off the oven and let the jars cool completely.
  • We filter the resulting mixture, squeeze the needles and twigs.
  • Now we repeat the whole process: we put raw materials into the filtered oil to get the initial volume.
  • Do not add oil! Raw materials will be needed more than the first time.
  • We leave the oven heating mode the same.
  • The third time you need even more raw materials.
  • Cooking fir oil in three steps.
  • The finished product is poured into glass containers.

The method may seem complicated and long. This is the case when it is worth working hard - the result will exceed all your expectations.

2. Second way easier. We prepare raw materials for it in any summer month.

  • We cut spruce branches (2 cm), if possible, collect the bark.
  • The crushed raw materials are placed in a liter jar (on the shoulders).
  • Refined vegetable oil (any) is heated to 80-90 degrees, poured into a jar.
  • We close the lid.
  • We put in a dark place for 40 days.
  • The resulting mixture is filtered, squeezed and heated to 50 degrees.
  • We repeat the procedure.
  • Pour the finished fir oil into bottles.

Homemade butter is stored in a dark place at room temperature. Dark glass jars and bottles are best suited for storage. Storage in plastic containers is not allowed. Plastic emits substances harmful to health.


Application

Fir oil is a universal preparation, it is desirable to always have it at hand. It is used in cosmetology, medicine, everyday life, aromatherapy.

Cosmetology

  1. Fir oil is used for facial skin care:
  • it saturates aging, withering skin with vital energy, brightens age spots, improves blood circulation, moisturizes, nourishes cells, slows down the aging process;
  • disinfects inflamed, problematic skin, cleanses blackheads, tightens pores, eliminates oily sheen, reduces the number of pimples;
  • soothes dry, chapped skin, heals small cracks, improves color, normalizes water balance.

2. Hair Care:

  • in case of hair loss, it increases blood circulation, stimulates the strengthening of hair follicles, nourishes them and moisturizes the scalp;
  • if the hair is oily, prone to dandruff, fir oil will dry it out, it will prevent the development of inflammatory processes, the appearance of microbes.

3. Hand care:

  • eliminates excessive sweating of the hands;
  • heals small cracks, softens the skin;
  • protects from the negative impact of the external environment;
  • moisturizes, nourishes the skin;
  • prevents brittle nails, enhances their growth.


The medicine

  1. many diseases, it has a bactericidal, antiviral, anti-inflammatory effect:
  • musculoskeletal system;
  • skin diseases;
  • cardiovascular diseases.
Traditional medicine offers hundreds of recipes using fir oil. Folk remedies good in complex treatment, they help traditional medicine, but should not replace it.

domestic use

  1. Soap making.
  2. Purification and disinfection of air.
  3. Insect repellent.

Aromatherapy, baths

  1. Improve emotional state.
  2. Relax the muscles, remove the clamp.

Contraindications

Like any medicine, fir oil should be used only after consulting a doctor, as it has contraindications for use. Such as the:

  • pregnancy, breastfeeding;
  • cardiovascular diseases;
  • hypertension;
  • diseases of the gastrointestinal tract;
  • mental disorders;
  • individual intolerance, allergy;
  • kidney failure;
  • alcoholism;
  • asthma, respiratory diseases.

Each person is individual, his reaction to a particular drug may not be predictable. Do not rush to apply new recipes on yourself, take a test, consult your doctor. Let each new recipe bring you only health.

Making butter at home:

Fuel oil is a petroleum product, which is a dark brown oily liquid. It has a rich composition - these are various organic compounds, resin, carboids, asphaltenes, hydrocarbons, carbenes. Fuel oil acts as a fuel, but it is also used to produce bitumen or a range of lubricants.

Fuel oil is a petroleum product that looks like a dark viscous liquid

As a rule, oil stains can be planted mainly at factories or car services. But in such cases, we are talking about contamination of the robe, which is not so critical. But putting a spot on your favorite clothes is already much more serious. This is possible even in public transport or in case of inaccurate performance of any technical work at home.

Among all types of dirt, oil stains are the worst to remove. Since the composition of the substance contains a huge amount of heavy resins, they quickly eat into the fibers of the fabric, respectively, it can be very difficult to remove them from there.

Of course, you can always go to the dry cleaners. Such establishments always have their own secrets, with which you can wash and remove any stain, including oil. However, there are a number of disadvantages here. First of all, it's the price. Quality dry cleaning services are not cheap. You also need to say that such services do not bear any responsibility for your things. It turns out to clean it - good, no - there's nothing to be done.

That is why sometimes you can pick up a completely damaged item from dry cleaning. Good reason independently look for the answer to the question - how to wash off stubborn fuel oil. It is recommended to resort to the help of a number of proven home recipes that were used by our ancestors. It is inexpensive, in addition, they are available for independent use, without the involvement of specialists.

You can remove fuel oil from a jacket at home or from any other type of clothing using special substances that have a certain aggressiveness and the ability to dissolve heavy resins.

There are several ways to remove oil stains.

Consider the most popular of them:

Means Peculiarities
or diesel fuel There is no fundamental difference here. Both gasoline and diesel fuel are oil products, just like fuel oil. They have good dissolving properties. It is important to remember that improper handling of these materials can lead to tissue damage. Also, gasoline and diesel fuel have a strong specific odor that can have Negative influence per person
Eucalyptus or fir oil Unlike the substances described above, the benefits of the oil lies precisely in the pleasant aroma. The properties of eucalyptus and fir allow them to effectively cope with serious pollution.
Dishwashing liquid Modern household chemicals are distinguished by improved efficiency. Dishwashing detergents are able to dissolve any type of dirt, including fuel oil. Care must be taken not to damage the fabric
Tar soap A tool that has been proven over the years. With the help of tar soap, you can quickly wash the stains on the jacket formed by fuel oil.
Ammonia This is a good answer to the question of how to remove fuel oil from expensive clothes without much effort. Alcohol can damage the structure of the fabric, has a sharp specific odor

Now we will consider each tool separately, since each of them has both its own advantages and disadvantages. Thanks to a detailed review, it will be possible to choose the best option.

Oil stains on clothes

Removing the stain with gasoline or diesel fuel

Highly active solvents, which include these products, are great for resolving the issue - how to remove a stain from fuel oil on high-quality clothes. Substances have proven themselves especially in the fight against old pollution. At the same time, it must be remembered that gasoline or diesel fuel can both help in eliminating the problem and aggravate it, and to such an extent that the thing will have to be thrown away. So the removal of stains must be approached as responsibly as possible.

First of all, it is necessary to apply gasoline on the back of the stain. To do this, use a cotton swab or disc, and a clean cloth will do. This must be done in order to prevent the further spread of resins through the fibers. This is true for fresh stains. After applying solvents, soak the item in warm water and try to wash with.

If the pollution is already old, you will need to apply diesel fuel or gasoline to the problem area several times, with an interval of 2-3 hours. If the stain is too large to wash off, it is advisable to simply soak them in gasoline for a few hours.

The most common method is the use of gasoline

It is very important to avoid contact of clothing with washing powders after solvent treatment. Initially, you need to carefully wash it with laundry soap, and only then send it to the washing machine.

It must be remembered that gasoline will remove not only the oil stain, but also the paint applied to the fabric, if used on natural and silk fabrics. The best way- Is it pure synthetic. For more delicate materials, you need to look for other ways than to wash the oil from clothes.

How to remove a stain with dish detergent

To wipe off oil from a delicate natural fabric, you can use gentle dishwashing detergents, which include active surface ingredients. It is advisable to resort to the help of professional products that are of high quality and safety. Things are washed very simply:

  • apply a small amount detergent on the stain and rub it for several minutes;
  • then you need to soak the thing in warm water (about 30 minutes);
  • wash the stain with your hands or with a soft clothes brush;
  • apply a little more product, then leave the thing to soak for another 10 minutes;
  • then rinse thoroughly under cold running water;
  • wash with a suitable soap by hand or in a washing machine using powder.

In this way, fresh oil pollution is mainly cleaned. If they are old, it is recommended to pre-treat the stain with butter.

Fir or eucalyptus oil

Many people think that this is a joke, but in fact it is not. Washing fuel oil from clothes with the help of these fragrant substances is real, however, not at once. It is important to choose products that contain only natural ingredients. It is desirable that it be pure oil, without any additives.

Here's what to do:

  • prepare oil and two cotton pads;
  • moisten one disc and place it on the back of the stain;
  • the second disk is also wetted, after which they actively need to rub directly the very place of contamination;
  • after the stain has darkened, you should immediately wash the item thoroughly using laundry soap.

This method is very simple, but its effectiveness is lower than other methods. Therefore, they resort to it if it is necessary to clean fresh fuel oil, and not old and stubborn pollution. In addition, it is suitable only for natural fabrics.

How to remove oil from jeans with ammonia

Quite an efficient method. If the stain is still fresh, try applying a little ammonia to a cotton swab or disc, then wipe it thoroughly. This event must be performed very carefully so as not to damage the fabric. It is possible that the procedure will need to be repeated several times. After the dirt has disappeared, be sure to wash the cleaned sweater, jeans, jacket, etc. by hand washing.

Another thing is if the stain is already old and has managed to eat into it. In this case, one ammonia will not be enough. It is necessary to prepare a special ointment, using not only ammonia, but also starch, turpentine and white clay. All this will need to be mixed in equal proportions, and apply the resulting paste to the place of contamination.

You can also wash the item in washing machine, after adding a little solution based on laundry soap and ammonia to the tray. In no case should you add washing powder - remember that in the case of oil stains, such products are completely useless.

Tar soap

Almost every housewife has this tool. This soap is inexpensive, made from natural ingredients. Thanks to this, it is able to cope with a wide range of contaminants, including oil stains. The effectiveness of the use of tar soap will be at the proper level only if the pollution is fresh, it is small, and the amount of fuel oil is minimal. In all other cases, the relevance of using this tool tends to zero.

It is necessary to grate a small amount of soap and dissolve it in warm water. The resulting solution is used to soak contaminated clothing. After 30-60 minutes, the thing will need to be washed manually and then rinse thoroughly.

How can you remove oily fuel oil from clothes? Based on all of the above, it is easy to conclude that there is an impressive number effective methods. Most of them are available for home use.

Important: you can’t use fir essential oil in its pure form - you can get a burn of the skin or mucous membrane! In the recipes below, "wipe with fir oil" means rub with fir oil mixed with a base - sunflower, sea buckthorn, olive, almond, peach or other fatty oil.

Colds

- at the beginning of the disease: rub fir oil on the outside of the tonsils three times a day;

- do steam inhalation (at least 2 hours after eating);

- dissolve 2 drops of fir oil in 15 ml of the base (fatty oil) and rub the back and chest of the patient;

- daily lubricate the tonsils every 5 hours;

In chronic angina, oil is instilled into the nose.

Influenza, acute respiratory infections, SARS (prevention):

- Dissolve 9 drops of fir oil in half a glass of warm water and rinse your mouth twice a day;

- do steam inhalation daily;

- rub a drop of oil under the nose or in the palm of your hand and breathe.

Influenza, acute respiratory infections, acute respiratory viral infections (treatment):

- take baths with fir oil (but only if the temperature is low);

- dissolve the oil in the base and rub the chest three times a day (after rubbing, put on warm woolen socks and cover yourself with a warm blanket);

- fir oil dissolved in fatty oil can be used for nasal instillation (1 drop 3-4 times a day;

- rub the feet and palms with fir oil;

- drip 3-4 drops of oil on the pillow before going to bed (then turn over and put your head on the other side).

Against cough:

- dilute 1-2 drops of fir oil in sunflower / olive and drip on the root of the tongue 3-4 times a day.

Sinusitis:

- mix fir oil with sea buckthorn oil and wipe the projections of the maxillary sinuses with the mixture three times a day;

- Instill the same mixture into your nose 3-4 times a day.

- 1-2 drops of fir oil drip on forefinger and rub into the skin around the nostrils, repeat the procedure every few hours.

Soak cotton wool with fir oil and apply daily to the affected area for half an hour, repeat the procedure every few hours.

Oral problems

Fir oil perfectly anesthetizes - it helps to quickly relieve pain and not suffer while waiting for a visit to the dentist. It also relieves inflammation.

For acute toothache:

- Drop 6 drops of oil on a piece of cotton wool or a bandage, then apply to the site of inflammation or pain for 20 minutes, then move to a place next to the inflammation and hold again for 20 minutes, hold the cotton wool on the other side of the diseased tooth for another 20 minutes, then discard the cotton wool ( repeat the procedure every 5 hours, in 2-3 procedures the inflammation will be removed, and the pain will subside.

Periodontitis, stomatitis, gingivitis:

- mix fir oil with sea buckthorn, peach or sunflower oil 1: 1, soak a cotton swab with the mixture and place the finished compress on the gums, keep for half an hour;

- do a gum massage: wrap a bandage around your index finger, moisten it in 5 drops of fir oil and massage the places of gum inflammation.

Ophthalmic diseases

For barley or blepharitis, soak a cotton swab in fir oil and gently treat the affected area. In this case, the eyes must be tightly closed and ensure that the oil in no case gets on the mucous membrane.

Diseases of the musculoskeletal system

It is in the treatment of diseases of this type that fir oil shows itself best. Relieves pain and inflammation.

Arthritis and rheumatoid arthritis: rub into sore joints and bathe in fir oil.

Plexitis: mix fir oil and massage cream 1:4, rub into sore spots or massage.

Rheumatism: mix fir oil with olive oil 1:2, warm it up and rub it into sore spots.

Sciatica and osteochondrosis: rub 7 drops of fir oil into the lower back. It is necessary to carry out 12 such procedures. In spring and autumn, supplement the treatment with massage (14 sessions each).

Stretching: do a massage with fir oil (pre-mix fir essential oil with olive or almond oil in a ratio of 1:10).

Injuries and diseases of the skin

Fir oil promotes skin regeneration, therefore it helps to quickly heal wounds, abrasions, burns. Great remedy for insect bites.

How to apply for wounds, calluses, insect bites: wash the wound with soap, mix fir oil with olive oil and rub twice a day on damaged areas. Do not rub into large wounds.

Burns: mix fish oil, lard or spermaceti with fir oil 1:1. Within 3 days, treat the damaged skin with a mixture, then prepare the same, but in a ratio of 1: 2. Rub twice a day.

If the victim is scalded with boiling water, you need to treat the wound with fir oil as soon as possible. This will help prevent blisters and reduce pain.

If the burn is caused by skin contact with poisonous plant, the damaged area should be lubricated twice a day with a mixture of fir and olive oil, mixed in a 1: 1 ratio.

With wet eczema, it is necessary to prepare a mixture for treating damaged skin. Mix badger fat / goose fat with fir oil in a ratio of 7: 3 and mix thoroughly. Apply the mixture to the sore spot, apply compress paper / gauze / bandage / clean cloth on top and tie. Such compresses must be done twice a day for 3 weeks.

Streptoderma: take baths with fir oil (dissolve 5-7 drops in a teaspoon of salt and add to warm water).

Children's diathesis: add 1 drop of fir essential oil to a serving of baby cream. Apply the mixture on damaged areas of the skin.

Fungus and diaper rash: make lotions with fir oil for half an hour. You can also make baths with fir oil. Perform procedures daily for 10 days. For diaper rash, apply for 5-10 minutes (apply a bandage soaked in oil to damaged areas.

reproductive system

Mastitis: mix fir oil with baby cream and make compresses on the chest. Change the bandage 2-3 times a day.

Prostatitis and prostate adenoma: mix 5 drops of fir oil and 5 ml of base (fatty cream or base oil). Rub the mixture daily into problem areas.

Diseases of the gastrointestinal tract

Hemorrhoids: lubricate the nodes with fir oil, also do microclysters.

The cardiovascular system

For angina pectoris, arrhythmia and tachycardia, rub fir oil into the left side of the chest (the area just below the nipple and up to the middle of the lateral line on the left).

Respiratory diseases

For whooping cough: steam inhalation. Add 5 drops of fir oil to boiling water and inhale the vapors for 10 minutes.

The treatment will be especially effective if you use not only the essential oil of fir, but also a fir drink (abisib, florentine water, fir hydrolat). Medicinal recipes with its use you will find on this page in the "Application" section.

It has a positive effect on the composition of the blood, the protective functions of the body, the gastrointestinal tract, liver, kidneys, increases efficiency, and gives a feeling of cheerfulness. Such a beneficial effect of fir oil is due to the fact that it does not dissolve in the gastrointestinal tract, but immediately enters the bloodstream, spreads throughout the body and “settles” in diseased organs.

Treatment with fir oil should be approached very carefully, because it can harm the body. So:

  • Be careful as fir oil destroys tooth enamel. Avoid getting it on your teeth.
  • When starting treatment with fir oil, check if you are allergic to it. To do this, apply a small amount of oil to the back of your wrist and rub it in well. If there are no red spots, then fir oil can be used, there will be no problems with it.
  • Avoid alcohol completely as it will cause severe pain.
  • In addition, fir oil has a strong effect on the heart. Therefore, if you have problems with this organ, refrain from using fir oil. And in order to avoid heart palpitations, do not abuse it - remember that it is excreted from the body only after two days, and sometimes it lingers in it even longer.
  • Fir oil can also lead to a loosening of the stomach. If this is to be avoided, take it 1 or 2 times a day.

In the first two days of cleansing, you need to take 3 drops of fir oil 3 times, then increase the single dose to 4 drops; one drop must be added every two days. However, you should not take more than 30 drops per day (that is, more than 10 drops at a time). The optimal time for the first dose of fir oil is from 7 to 9 hours, for the second dose - from 12 to 13 hours, for the third dose - from 18 to 20 hours. Try to strictly follow this instruction.

Take fir oil by dropping it into a teaspoon with sugar. After that, you need to drink 2-3 sips of water or warm tea. With increased acidity, the oil should be taken either immediately after a meal, or immediately before a meal. If the acidity is low or normal, then it is better to do this 10 minutes before meals.

However, even 30 drops per day may be too much. In order not to harm the body, it is necessary to monitor the heartbeat with each increase in a single dose. First, count the number of heartbeats per minute in a calm state. Then count it 2.5-3 hours after taking fir oil. Do this every time you increase the dose. If the beat frequency has increased by 10 beats, it is necessary to stop increasing the dose, reduce it by one drop and consider this amount as the limit.

Created on 24.08.2016 14:25

Small troubles lie in wait for a person everywhere, for example, suddenly in the most unexpected place, as if an oil stain appears by itself. Where is there more opportunity for it to appear? In the kitchen. And since food is being prepared here, the stain becomes not only unpleasant, but threatens with danger. It needs to be eliminated immediately. How to wash the oil at home?

If, out of ignorance, inexperienced housewives believe that it is enough to wipe oil troubles with a dishcloth or sponge, they are deeply mistaken. Oily stains will remain, and the pollution will not disappear.

Since oil can be different - machine, creamy, vegetable - the fight against it is carried out depending on the type.

Butter must be removed from above so as not to rub the soft mass further into the surface. The vegetable, until it has spread, is collected in the direction from the edges to the center, removing the viscous substance. But this is done quickly: the oil will try to spread further.

Fats and oily substances dissolve well with dishwashing detergents. Take what is on your shelf, arm yourself with a rag (it absorbs liquids better than a sponge) and proceed to rubbing stains. Helps everywhere: both on fabric and on wooden floor, and on the tile. After you wash off clean water to get rid of the soap.

So that the stain does not spread, does not soak the fabric, does not become a skating rink on the floor for you, sprinkle it with salt. The salt layer will absorb liquid oil, it will be enough for you to scrape off the spent crystals and wash the area with soap. It is desirable that the salt crystals are not too small, as their absorption area increases.

Old oil eats into the materials firmly. It will have to be softened or dissolved first. For these purposes, it is better not to find gasoline. True, after the “odorous” solvent, you will have to work with soap or washing powder and weather, but the oil will lag behind.

Vegetable oil is qualitatively and without a trace washed off with wood ash. Of course, not everyone can get such a tool, but if there is, the ash will easily neutralize vegetable fat and make the surfaces shiny. This tool is especially appreciated when washing glass jars from vegetable oil.

Afraid of oil hot water. They found a stain - under running water, under hot water: part of the oil will be washed off for sure.

A common anti-oil agent is soda. She is her chemical properties resists fat, removes it without a trace. It is enough to sprinkle lightly on the stain and rub it with a rag.