Pipes

Children's treehouse - game, training, mystery. Do-it-yourself tree house What can you make a tree house from?

If there is a child in the family, there should be a separate place for children's games. It is very easy to set up a safe and comfortable children's playground in a dacha or suburban area. An interesting and very welcome addition to the site could be a small house or hut located right on a tree. Making a treehouse with your own hands is not that difficult if you choose a simple project and easy-to-use materials.

First you need to think through all the details and draw up a drawing. The main parameters are the height and area of the house, as well as methods of its fastening. Typically, the base of the house is a rectangular shield with holes for branches, supported at the corners by strong pillars. The walls and roof of the structure can be of any shape and made from any available materials.

To get into the house you need. It should be as reliable as possible, have a strong fastening and at the same time not spoil the appearance of the structure. It is impossible to nail a ladder to a trunk - this is detrimental to the tree, and due to its growth, the structure will become increasingly deformed. A rope ladder is the cheapest option, but it can be used at low heights and only if the child knows how to handle it. All this must be taken into account when drawing up the project and calculating the material.

It is very important to choose the right tree, because the strength and reliability of the house, as well as the safety of the child, depend on it. You should not choose old trees with large hollows and voids inside, with a lot of dry branches, or with exposed roots. Trees that are too young and immature are also not suitable for such purposes.

Preparatory work

Having chosen a tree, you need to prepare it correctly. Small, dense growth on the lower branches and trunk can be safely removed with pruning shears, but medium-sized branches should be pruned wisely. Ill-proper pruning can have a detrimental effect on the tree and it will dry out. To prevent this from happening, you can leave all the large branches and mount the base for the house around them.

For construction you will need tools:

hacksaw or circular saw;
hammer;
plane;
drill;
screwdriver;
roulette;
building level;
sandpaper.

Materials you will also need:

edged board with a section of 5x25 and 2.5x15 cm;
timber 150x150 cm;
support beams with a diameter of 20 cm;
galvanized screws;
nails;
metal mounting plates;
antiseptic impregnation for wood;
solid oil or oil waste.

Before starting work, boards and timber must be treated and dried in the sun. This will prolong the operation of the house and protect wooden surfaces from dampness and rotting. The length of the support beams should be 1-1.5 m greater than the distance from the ground to the base of the house. Beams must be dug into the ground, so after treating with an antiseptic, the lower part of each beam is covered with a dense layer of grease, bitumen mastic, or impregnated with oil waste.

Prices for different types of building boards

Construction boards

House construction technology

House construction plan (top view)

Stage one - installation of supports

Carefully measure the distance between the main branches and determine the location of the platform for the house. Project the corners of the base down and mark these points with beacons. Using a drill, holes are prepared for the supporting beams; The depth of the holes is at least 1.2 m, the diameter is 25-30 cm. Sand is poured into the bottom in a layer of 10 cm, then the same layer of crushed stone. The beams are lowered into the pits, leveled and temporarily reinforced with cinder blocks or timber spacers.

All beams must be the same height and stand strictly vertical. In this case, the tree trunk can be located between the support pillars or act as one of the load-bearing supports. Mix the cement mortar, pour it between the walls of the pit and the pillar, and leave to dry. When the base is sufficiently hardened, the spacers are removed.

Stage two - platform installation

For the platform frame, take a timber and cut it to the required length. If the platform rests on pillars at all corners, surrounding the tree trunk, the supporting beams of the frame are fastened along the perimeter of the base. To do this, each beam is raised to floor level, leveled horizontally and both ends are screwed to the inner surface of the pillars. The resulting harness is reinforced at the corners with metal plates.

Next, additional beams are stuffed inside the frame, placing them parallel to each other at a distance of 20-30 cm. Where the tree trunk passes, a hole of the appropriate size is left. From below, the frame is lined with two transverse boards, placing them on both sides of the trunk. All connections inside the frame are reinforced with metal plates and bolts.

If one of the supports is a tree, the platform is mounted differently. The beam is raised to the level of the base of the house and screwed at both ends to the pillars, and in the middle it is nailed to the tree trunk. Then the timber is fastened in the same way on the other side. Both beams must be positioned strictly horizontally. After this, other beams are placed on top, perpendicular to the bottom ones, in increments of 0.5 m. Of course, all elements of the platform are bolted together using steel plates.

The third installation option is mounting without load-bearing supports. If the platform is attached exclusively to a tree, 2 beams are nailed to the trunk 30 cm below floor level on both sides. Then the remaining beams are laid perpendicularly on top in increments of 50-70 cm and connected at the ends with thick boards. The result should be a rectangular structure lying in a horizontal plane. Now additional spacers are installed: they take beams of the same section and fasten them at an angle to the platform, resting one end against the outer beams of the frame, and connecting the lower ends to the tree trunk.

Stage three - laying the floor

For the floor, use high quality edged polished boards. The wood is carefully checked for the absence of roughness and knots, and additional sanding is carried out if necessary. The boards are cut to the size of the floor and laid out on the ground for marking. This is necessary in order to accurately cut holes for the branches and trunk of the tree, because it will not be possible to make neat cuts at the top.

So, the boards are laid out in a rectangle, leaving gaps of 1-2 cm, the circumference of the trunk is measured and the boundaries of the cutout are marked on the future floor of the house. Using a jigsaw, cut holes of the required diameter and fit them onto the wood. The floor should not be closely adjacent to the bark, otherwise as the tree grows, the structure of the house will be deformed. If the blanks correspond to the drawing, you can attach the floor to the platform.

The boards are laid on the frame in the same way as on the ground, at intervals of a couple of centimeters. These gaps are designed to drain rainwater. Secure the floor using self-tapping screws or nails. The finished product should lie strictly in a horizontal plane, not creak or wobble under load.

Stage four - installation of the walls of the house

First, you need to install a strong timber frame around the perimeter of the platform. Here you can take lumber of a smaller section, for example, 50x50 mm. The timber is cut to the height of the walls and installed at each corner of the base, screwed to the protruding support beams with anchor bolts. Intermediate posts are mounted at a distance of 40-50 cm from the corner posts and fixed to the outside of the frame base. You cannot attach the racks directly to the floor; such a connection will not be reliable.

Corner and intermediate posts are reinforced with spacers and then sheathed with boards. The walls can be solid or lattice, it all depends on the preferences of the master. The number and shape of windows, as well as their location, can also be selected at will. The main thing is that the openings are reliably protected and the child cannot fall out of the house.

Stage five - roof installation

The roof is best done in the form of a canopy. At a height of 1.5-2 m above the walls you need to find two strong branches located on both sides of the house. Metal hooks are screwed to the branches and a thick cord or reliable rope is pulled between them. A piece of tarpaulin is thrown over the rope and its ends are secured at the corners of the house.

If branches interfere with making a canopy, you can mount the roof differently. A timber frame is attached along the upper edge of the corner posts. Next, 2 trusses are assembled and installed above the opposite walls. The trusses are connected to each other by two wide boards, which are stuffed along the upper edge of the rafters. Additional fastenings are not required for such a small roof, and the structure needs to be covered with some lightweight material - polycarbonate sheets, or ondulin.

Holes are cut in the roof, as well as in the floor, for large branches, if the structure cannot be installed otherwise. Again, you cannot attach the roofing close to the tree; you should definitely leave a small space around the cutout.

Stage six - installation of the stairs

The staircase to the house can be rope, straight wooden, light lattice, long or short, flat or steep. There are a lot of options, and choosing the right one is not at all difficult. One of these options is a ladder in the form of a shield with slots. To begin with, take a 50x50 mm beam with a length of 2.5 m and place it against the base of the house at an angle of 75-80 degrees, that is, almost vertically. Mark the cutting lines with a pencil and saw off the excess. The second beam is cut in the same way.

Having laid the beams on a flat surface, boards with a thickness of 2 cm or more are stuffed on top. The width of the boards is 15 cm, length 50-70 cm. An oval hole is cut into each piece the width of the foot and the cuts are processed with sandpaper. The cutout should be located on one side, at a distance of 5 cm from the end of the board. When sheathing the board, the blanks are nailed so that the cutouts alternate: the first board with a cutout on the right, the second with a cutout on the left, and so on until the end.

The boards are attached to the beams as a continuous sheet, without gaps. The finished ladder is placed against the house and secured on the outside of the platform using plates and bolts. Be sure to check the reliability of the fastening, because falling from the stairs can result in serious injury. The firmly fixed structure is treated with a primer with antiseptic properties, and then painted or coated with wood varnish.

The final stage is finishing

The house is ready, now all that remains is to decorate it and make it cozy. To protect wood from weathering, all external surfaces are recommended. It is advisable to choose the same colors for the walls and stairs, so the house will look more harmonious. There is no need to paint the inside of the boards, the main thing is that they are as smooth as possible. For convenience, you can attach light shelves inside, put a basket for toys or a children's table. The floor is covered with a soft rug and comfortable children's pillows are laid. Everything else depends only on the little owners of the house, so further arrangement should be entrusted to them.

Video - DIY tree house

Figure 1. Building a children's tree house is quite simple, the main thing is to follow all safety standards.

How to build a tree house? All you need to build a tree house for an adult is a suburban area. The construction itself can be done with your own hands, showing design ingenuity. If basic safety standards are observed, a tree house can become a real fairy tale for children and a joy for adults who see happy children. Any fairy tale can become reality! To do this, you need a little skill, ingenuity and courage in implementing your plans.

Construction Features

Having decided to build tree houses, you need to complete the main tasks: find a tree with a trunk of sufficient strength on the site, solve the issue of safety of the elevated position of the house, and ensure the necessary strength of the structure when exposed to the most unfavorable conditions. The strength of the house must be calculated taking into account the simultaneous presence of several people and the impact of weather factors: gusts of wind, precipitation, especially the accumulation of snow on the roof.

Design Features

Figure 2. Scheme of attaching supports to wood.

With any design solution, a DIY treehouse must have the following mandatory design elements:

supporting elements of the required strength;
flooring that does not allow you to fall down under any load;
durable frame;
a roof that can withstand any possible precipitation;
stairs to climb into the house;
handrails or parapet to prevent falls from height.

In addition, the house should have play elements appropriate for the age of the children.

An important design parameter is the height of the building. Naturally, it is, first of all, selected from the existing possibilities, i.e., the height of the tree on which construction is planned. The house should be located on thick branches and trunk, and not on the top. In addition, the lifting height must be safe for children, and its selection is based on the age of the user. The optimal height is considered to be a floor level at a distance of 1.5 m from the ground for any age, but can reach 2 m for fairly old teenagers. With a higher location of the building, the increasing influence of wind at height should be taken into account. The area of the house is determined taking into account the strength characteristics. Below are diagrams of some interesting tree house designs. (Fig. 1. Tree house)

Selecting a reference tree

Figure 3. Tree house construction diagram.

Most often, the house is located at the beginning of the branch of the crown from the trunk. The choice of tree for construction should be based on a firm belief in the strength of the supporting branches and trunk. It is necessary to choose a tree with a strong root system that grows in dense soil. Optimal options: oak, fir, maple, ash. The following are considered unsuitable due to their strength characteristics: chestnut, birch, willow, poplar, linden.

Rotten and defective branches should not be chosen as horizontal supporting branches. All branches that cause suspicion of strength should be cut off immediately so as not to interfere with construction. The supporting elements must have a diameter of at least 20 cm. It is desirable that the basis is not one branch, but a fairly branched section of the crown. In other words, several independent support points for the house should be provided. When placing a building, the tree trunk should strengthen the strength of the entire structure if the main support is on horizontal branches.

Selection of material for construction

To ensure harmony with nature, the base of the house is made of wood. In this case, the load-bearing part: supports, floor covering, frame, rafter system, railings - must be made of durable timber with a thickness of at least 70 mm with reliable fastening. The floor is made of durable boards and covered with sheets. It is better to do the wall cladding and roofing in a lightweight version so as not to increase the load on the supports. Here you can use clapboard, plywood or plastic. All wooden elements must be treated with anti-rot compounds.

To combine the load-bearing parts, it is advisable to use bolted connections; fastening with nails is not recommended.

Tree house supports

The method of supporting a tree house depends on its size, weather conditions, height and strength requirements. In practice, four main fastening methods are used:

Suspension system using ropes and cables.
Support on piles with their fixation in the ground.
Attaching to the trunk and large branches using supports and brackets.
A combined method that combines these principles.

Quite often, fastening the structure directly to the tree is used. In Fig. Figure 2 shows diagrams for attaching such a system to the trunk and thick horizontal branches. Fastening is carried out using a wooden beam with a thickness of at least 50 mm. When fixing to the trunk, minimal damage should be caused to the tree so as not to cause its death. (Fig. 2. Scheme of attaching supports to wood)

A tree house can be located in relation to its trunk in two ways: on horizontal branches close to the trunk with side fastening and directly on the trunk when it passes through the house room. A more reliable design is provided in the second method, that is, when the house is formed around a tree trunk.

The second common method of support: on piles fixed in the ground using a shallow foundation. In this case, from 1 to 4 vertical racks made of timber of at least 75x75 mm are used. Depending on the additional attachment to the tree, one central support, two side reinforcing posts or a system of 4 corner supports can be installed.

Necessary tool

To build a treehouse with your own hands, you will need the following tools:

Bulgarian;
electric drill;
screwdriver;
hacksaw;
chisel;
hammer;
wrench;
plane;
file;
roulette;
plumb;
level.

Home construction

Building a treehouse with your own hands after erecting the supports includes the following steps: making the floor, installing the frame, creating the roof, installing the stairs, and cladding the walls. In Fig. Figure 3 shows a diagram of the main elements of the house. (Fig. 3. Tree house construction diagram)

Floor of the house. The floor covering is assembled from logs measuring at least 50x50 mm in increments of 40-60 cm (depending on the area of the house). On top of the joists is laid sheathing made of boards with a thickness of at least 20 mm, plywood or chipboard of the same thickness.

If the house is mounted on the side of the trunk, then it is recommended to make the floor panel on the ground, and then lift it onto the supports when finished. When the house surrounds the trunk, installation will have to be carried out at a height.

House frame. The frame of the simplest house includes 4 corner vertical posts, 2 posts for installing doors and posts for mounting windows. The racks are connected at the top by horizontal beams. All of them are made of wooden beams with a thickness of at least 70 mm. If there is a sufficient area of the house with a balcony, then additional vertical beams are installed in the place where the wall is formed, and the outer posts are connected with strong horizontal railings at a height of at least 1 m.

Roof of the house. The roof of the house is made in the form of a rafter system from timber with a thickness of at least 50 mm. The roof, depending on the project, can be single or gable, as well as flat.

A sheathing of 20 mm thick boards is laid along the rafters, and roofing material is laid on top. It is recommended to lower the lower end of the roof slope 15-20 cm below the ceiling. The roof is usually made of waterproof plywood, but any material, preferably lightweight, can be used. If a tree trunk passes through the house, then the gap between the roof and the wood must be sealed with sealant or foam.

Many parents ask how to build a tree house for children, what kind of tree should be used for construction, materials and tools, what will be needed for work.

A tree house for children must first and foremost be safe. This means that its height above the ground should not exceed a certain value, and the thickness of the trunk should not be less than 30 cm in diameter.

The process of building a simple tree house

It must have a fence railing. And besides this, when making a tree house, you need to take into account many more different factors:

Choosing a tree to build

If you decide to make a treehouse with your own hands, then first you need to find a suitable place to build it. There are a number of criteria that need to be taken into account when choosing. These include:

the composition of the soil around the tree;
type (species) of wood;
his age;
condition of branches and trunk;
crown volume.

Now we will consider in detail each of the selection parameters. The foundation for construction should be on normal, not sandy soil. Otherwise, the trunk will collapse under the additional weight that the tree house will create.

An example of a tree with a built children's house

The type of wood significantly influences the choice. It is better to exclude pine, like other conifers, immediately. Sharp needles can injure a child, and the resinous trunk will create a lot of problems with washing clothes and bathing the children. Linden wood is too soft, and poplar, willow and chestnut have a weak root system. Therefore, a do-it-yourself tree house is most often built on oak or maple. They have not only solid wood, but also a branched crown, convenient for installing a platform.

Of the fruit trees to install a small house, an apple tree is suitable. But it is only suitable for children; its branches may not be able to withstand adults.

The tree chosen for construction should not be young or old. And the more branches there are, the better the result. Please note that the thickness of the branches on which the tree house for children will be mounted should not be less than 20 cm.

Project drawing

Before starting work and before purchasing the materials needed to build a tree house, it is necessary. It takes into account all elements, compiles dimensions and verifies proportions.

It is imperative to involve children in working on the project. After all, they are future residents, and their opinion must be taken into account. As a result, the home craftsman will be able to create a magical place for games and entertainment. The first step is to make a sketch. To do this, the future house is drawn on plain paper, without dimensions or proportions.

Treehouse drawing

Having agreed on the design, they begin to make real drawings. In them, the structure is drawn to scale, indicating all the data and exact numbers.
The diagram must be made in at least three projections - front view, bottom view and side view. It will be good if the master draws a separate drawing for each side. It is better to draw on graph paper, it has ready-made guides. To work on the project you will need:

drawing pencil;
ruler;
square;
washing gum.

It would be better if there were two types of pencils, with hard and soft cores. The sketch is made first, and the outline is drawn second. The diagram will help not only with work, but also with the preparation of materials. The master will be able to calculate their number so as not to spend extra money.

Choosing tools and materials

Traditionally, a children's tree house is made from dried and pre-prepared wood. The frame is made of timber with a cross-section of at least 5 cm, boards are used for the floor, and the walls can be sheathed with sheets of plywood or the same boards. For the roof, plywood is used, on top of which a soft roof is laid, imitating tiles, like in a real fairy-tale house.

Pine boards are used as the main material. It is affordable and easy to process. And with high-quality processing and drying, this type of wood can serve little owners for more than one year.

Metal corners and brackets are used as fasteners, and all elements are fixed with self-tapping screws and bolts with nuts and washers. A DIY tree house requires a certain set of tools. The master will need:

Treehouse design option

hacksaw or jigsaw;
hammer;
drill;
screwdriver;
pliers.

In his work, the master will also need measuring tools, such as:

level;
plumb;
roulette;
drawing pencil;
square

As a child, who among us didn’t dream of having our own tree house like Bart Simpson’s? This is your headquarters, an observatory, and a fortress. You can play in it with friends or hide from the endless errands of your parents. Having grown up, we finally had the opportunity to make our old dream come true, and if not for ourselves, then at least for our children and grandchildren.

We decided to find out how difficult it is to build a tree house. How much will it cost, is this design reliable in operation, will its owners have any additional problems with paperwork and taxes. Helped us figure it all out construction company architect Wonderwood Maria Nekrasova .

Tree selection

Breed

So, if you want to build a tree house, the first thing you should make sure is whether you have a suitable tree on your site. Strong oak, ash or maple are ideal, pine is worse. Spruce trees are not suitable for the construction of suspended structures - their weak root system lies too close to the surface. The presence of a hollow is a negative factor; a tree with a large cavity will most likely be unsuitable for construction.

Age

“Age also matters - preference should be given to mature trees,” notes Maria Nekrasova. — Firstly, they are stronger and more reliable, and secondly, they practically do not grow. This is important, since in order for the house not to simply fall apart during operation, special tolerances must be included in the project. The older the tree, the smaller the tolerances, and accordingly, it will be much easier to insulate the future house. However, too old trees are also not suitable - if the tree has outlived its life, it is not worth building a house on it.”

Can a tree die?

“No, nothing will happen to the tree! Its trunk is mostly dead tissue. The main thing is not to damage the core, and this is quite difficult - its thickness is about 5-10 centimeters. In general, we try to injure the tree to a minimum, and make technological holes only if the trunk diameter allows.

We make sure that the area of damaged surface integument (bast) is minimal, since the flow of sap from the leaves with organic nutrients occurs precisely along it.

Before construction, we call a specialist forest pathologist to the site, who objectively assesses the current condition of the tree and its suitability for use as a site for building a house,” Maria answered.

“If there is no large tree on the site, a group of smaller trees can be used for construction. In addition, you can always use additional supports, however, the more supports, the less such a building will look like a tree house and all the original charm of this wonderful idea will disappear,” she added.

Construction stages

Creating a Project

The construction of any house begins with the creation of a project, and if you can take a free standard project as the basis for an ordinary house, then with tree houses it’s a completely different story. Here there can be no question of the existence of any template drawings - each case is unique. When creating a tree house project, you need to very carefully calculate the permissible loads and sometimes use very non-trivial solutions.

Preparatory work

After the house project has been created, it is necessary to perform sanitary pruning of the selected tree and inspect the soil. If your project involves vertical supports, the list of preparatory work will also include laying a columnar or strip foundation.

Construction materials

“The best material for building tree houses is cedar,” says architect Wanderwood. — It is light and durable, and accordingly creates minimal load on the tree. For the same reason, when constructing the roof, we try not to use heavy tiles and metal.”

Cost and terms

A small children's house 2.5 by 2.5 meters can be built in just two weeks. However, our expert does not recommend starting construction in the off-season. According to her, a tree house, just like a regular house, takes time to settle, so you need to try to avoid large changes in temperature and humidity. Such a small house will cost about 700 thousand rubles.

If desired, you can build a full-fledged residential building on a tree with all communications and the possibility of all-season living. Wanderwood plans to build two of these homes this year. The upper price ceiling for residential houses in trees is not limited in any way, and the cost is calculated individually each time.

It is important to note that tree houses are much more expensive than their counterparts on the ground - a significant amount of money is spent on creating a supporting structure, plus the implementation of such complex projects requires a team of qualified builders and special equipment. The cost is due to the complexity of supplying communications and the complexity of creating decorative elements.

Thus, a residential house on a tree will cost several times more than the exact same house on the ground; accordingly, on trees - this is a pleasure for people with above-average income.

Safety and Operation

What is the main difference between a tree house and a regular house? That's right - it is above the ground. Therefore, the main danger that may await you and your loved ones during its operation is a fall from the stairs. To be on the safe side, we recommend not building a tree house higher than 2-2.5 meters from the ground, and also “laying straws” on a potential landing site. You can sprinkle sawdust under the tree or plant a dense, soft lawn under it. If you are afraid to climb stairs, the tree house can be equipped with a special electric lift. But there is no need to be afraid that the tree itself may fall - the developer bears full responsibility for this, therefore he is reinsured many times both during the creation and during the implementation of the project.

During the operation of a tree house, it is necessary to monitor not only the condition of the building, but also the tree itself. No special care is required, however, once every two to three years we recommend calling in specialists (pruning branches, treating the trunk, giving a general assessment of the condition of the tree). At approximately the same intervals, it is necessary to inspect and tighten all the main fasteners. It is important that the fastening points are carefully insulated - if moisture gets there, in winter the structure may simply crack.

Taxes and legislation

There is no legislation as such in our country regulating the construction of tree houses. No special building permit is required. You also won’t have to pay additional taxes, since tree houses are not considered permanent buildings. In the field of building tree houses, there are no special fire safety and insurance rules, notes Maria Nekrasova.

No money for construction company services? You can try building a treehouse with your own hands! Detailed instructions on how to do this are on the WikiHow website. And the Treehouse Masters program on the Discovery Channel will help you get inspired!

Material prepared:

Theodor Dolinin

The tree house is a great place for your child to play, he will be just happy if it is a surprise or he himself will take part in its construction. This will be the envy of all his friends.

Using plumbing bolts 10x160 DIN 571 and corresponding washers, we fix two logs (20 mm boards) parallel to each other. Try to drill the pilot holes for the bolts as straight as possible. The upper end of the log will serve as a support for the next two logs, directed perpendicular to the previous ones. Then we attach boards around the perimeter that form the frame for the floor in your tree house.

Stage 2: Leveling the platform

Moving from one corner to another, we attach a temporary support to each corner of the platform. Next, using a level and pads for the supports, we level the platform. The longer your level, the better.

Stage 3: Installation of inclined supports

Once we have leveled the platform, we can begin installing the inclined supports. Which will support the tree house. For this purpose, supports for beams were used as in the photo. To do this, I had to cut the beams at an angle of 45 degrees. If you can’t find such brackets, then these might work

Please note that the beam is two twisted boards.

Stage 4: Laying the floor

This is probably the best part of the project because at the end you will be able to stand on a platform. You can start laying the floor from one of the sides. The boards do not have to be cut to the required length right away; let their ends stick out, they can be trimmed later. You will need a jigsaw to make a cutout for the wood in place. It is necessary to leave enough clearance for the tree to grow and to sway in the wind. Also at this stage we cut out an opening for the future entrance to the tree house.

Stage 5: Frames and wall installation

We assemble frames for the walls on the ground. We use the measurements that need to be taken after assembling the platform and flooring. Once the frames are assembled and while they are on the ground, you need to place them next to each other and make sure that they fit together well and match the measurements of the platform. After this, you can start sewing up the walls.
It is better to raise the walls using a rope and a block fixed higher on the tree. The walls will be quite heavy. You will have to find someone to help you tie them down or hold them after you get the walls up.

Stage 6: Roof Frame

Before you start making a roof, you need to decide on the slope of its slopes. I used a 1:3 ratio for the ramp and it was a good choice because... This slope made it possible to stand on the roof without the risk of falling off it. Once you have decided on the height of the central posts, you can install them and attach the ridge. Once the frame is assembled, you can begin covering it with plywood. Don't forget to leave space around the tree like we did for the floor. I had to cut a sheet of plywood to secure it to where the tree is growing. Next, we cover the roof with an awning.

Stage 7: Login

I made the door like a wild west saloon. The stairs were carefully treated with an antiseptic, because... it is in contact with the soil. I made the steps more frequent to make the stairs more comfortable for little feet.

Stage 8: Finishing work

We mark and make railings so that you can safely go out onto the balcony.

Everything is not presented in too much detail, since in each situation and with a different budget everything can be completely different, and if you go into more detail, it will turn out to be a very long article. I hope it’s shown clearly enough how to build a tree house with your own hands.