Technical data for wilo torr z40 pumps 10. Circulation pumps

Type

Glandless circulation pump with threaded or flange connection

Application

hot water heating systems, industrial circulation systems, air conditioning systems and closed cooling circuits

Designation

Product features/benefits

• Used in heating and cooling/air conditioning systems from -20 °C to +130 °C (TOP-S 25/13, TOP-S 80/15 and TOP-S 80/20 from -20 °C to +110 °C )
• Pump housing with cataphoretic coating (KTL) for protection against corrosion due to condensation.
• Manual power adjustment with
  3 speed steps
• The pump is easy to install thanks to the combination flange PN 6/PN 10 (for DN 40 - DN 65)

Specifications

• Permissible temperature range -20 °C to +130 °C,
  short-term (2 h) up to +140 °C (TOP-S 25/13, 80/15, 80/20 and pumps with Wilo protection module: -20 °C to +110 °C)
• Network connection:
  • 1~230V, 50Hz (depending on type)
  • 3~230 V, 50 Hz (optional with switch plug)
  • 3~400V, 50Hz
• Protection class IP X4D
• Threaded or flanged connection (depending on type) Rp 1 to DN 100
• Max. operating pressure with standard version: 6/10 bar or 6 bar (special version: 10 bar or 16 bar)

Equipment/functions

Operating modes

• Switching speed stages

Manual control

• Speed ​​setting: 3 speed steps (2 speed steps for single-phase pumps with P 2 ≥ 350 W)

Automatic control

• Complete motor protection with integrated electronic system switching off (standard equipment only for three-phase pumps with P 2 ≥ 180 W and single-phase pumps P 2 ≥ 350 W, as an option for all types with Wilo?C protection module)

External control

• Control input "Off" priority" (optional for all types with Wilo?C protection module)

Signaling and indication

• Separate/collective fault signaling (floating NC contact) (optional for all types with Wilo?C protection module)
• Collective fault signaling (floating NC contact) (standard equipment only for 3~pumps with P 2 ≥ 180 W and 1~ pumps with P 2 ≥ 350 W, optionally for all types with Wilo-C protection module)
• Separate operation signaling (potential-free NO contact) (optional for all types with Wilo?C protection module)
• Protective winding contact (SCD, potential-free break contact) only for single-phase pumps with P 2 = 180 W)
• Fault indicator light (standard equipment only for three-phase pumps with P 2 ≥ 180 W and for single-phase pumps with P 2 ≥ 350 W, as an option for all types with Wilo-C protection module)
• Direction of rotation indicator lamp (only for three-phase pumps)

Dual pump control (double pump or two single pumps)

• Main/standby operating mode (automatic pump changeover on fault/timer): as an option for all pump types with Wilo-C protection module

Equipment

• For flanged pumps: Flange versions
  • Standard version for pumps DN 40 - DN 65: combination flange PN 6/10 (flange PN 16 according to EN 1092-2) for counter flanges PN 6 and PN 16,
  • Standard version for DN 80/DN 100 pumps: flange PN 6 (designed PN 16 according to EN 1092-2) for counter flange PN 6,
  • Special version for pumps DN 40 - DN 100: flange PN 16 (according to EN 1092-2) for counter flange PN 16,
• Cable entry possible on both sides (only for single-phase and three-phase pumps with P 2 ?180 W)
• Serial equipment of pumps used in heating systems with thermal insulation.

materials

• Pump housing: Gray cast iron
• Working wheel: synthetic material
• Shaft: Stainless steel
• Bearings: metal graphite

Scope of delivery

• Pump
• thermal insulation
• With seals for threaded connection
• Washers for flange screws (for nominal connection diameters DN 40 ÷ DN 65)
• Installation and operating instructions

Options

• Special version for operating pressure PN 16 (for a fee)

• Version for special voltages on request.

Accessories

• Threaded connections for threaded connection
• Compensators
• For 3~400V pumps:
  • Switching plug 3~230 V, 50 Hz (not TOP-S 80/15, TOP-S 80/20)
  • Wilo C protection module, 3~400 V
• For 1~230V pumps:
  • Disconnect device Wilo SK 602N/SK 622N for complete motor protection
  • Wilo C protection module, 1~230 V

The circulation pump WILO TOP-S 40/10 DM PN6/10 is used for the circulation of water or a water-glycol mixture in heating or air conditioning systems. Also used in underfloor heating systems. It is a reliable and proven pumping equipment. Installed directly on the pipeline, designed for continuous trouble-free operation.

Designation

• TOP-S - standard pump
• 40 - nominal inner diameter
• 10 - nominal head (delivery height), m
• DM - three-phase pump, 3~230/400 V, 50 Hz

Features of the circulation pump WILO TOP-S 40/10 DM PN6/10

• The "wet" rotor provides almost silent operation.
• Three modes of operation corresponding to different degrees of power. You can choose the optimal frequency, thereby optimizing energy costs.
• Cataphoretic coating for protection against corrosion and condensation.
• Supplied with thermal insulation.
• Wide range of temperatures of the pumped liquid - from -20 to +130 C.

Specifications

Head, m	10
Consumption, m3/hour	21
Rated power, W	350
Power, W	365 / 465 / 585
Current, A 230/400	0,65 / 0,82 / 1,17 / 1,12 / 1,43 / 2,02
Electrical connection	3~230/400V, 50Hz
Electrical protection class	IP44
System pressure (max.), bar	10
Pressure in front of the pump at t
+ 50 °C	0.05 m.
+ 95 °C	5 m.
+ 110 °C	11 m.
+ 130 °C	24 m
Pump installation	horizontal / vertical
Pumped medium	clean
Fluid temperature	from -20 to + 110 °С
short term	from -20 to + 140 °C
Connection to the pipeline	flanged
Flange inner diameter, mm	40
Temperature environment	up to 40°C
Mounting length, mm	250
Weight, kg	12.5

Equipment and functions

Flow characteristics

Design and operational features

• "Wet rotor" - the rotor is located directly in the pumped liquid, which lubricates the pump bearings.
• Applicable materials
  - housing - Gray cast iron
  - shaft - Stainless steel (X46Cr13)
  - impeller - Synthetic material (PPE)
  - bearings - Metal graphite
• Has built-in overheating protection
• After an emergency shutdown, the pump automatically turns on after cooling
• Pumping of water and water-glycol mixture is allowed (max. 1:1; for glycol content more than 20%, the performance must be checked).

Contents of delivery

• Pump
• thermal insulation
• With seals for threaded connection
• Washers for flange screws (for nominal connection diameters DN 40/DN 65)
• Installation and operating instructions

Accessories (not included in the basic package)

Threaded connections for threaded connection
- Compensators
- For 3~400V pumps:
- Switching plug 3~230 V, 50 Hz (not TOP-S 80/15, TOP-S 80/20)
- Wilo C protection module, 3~400 V
- For 1~230 V pumps:
- Disconnect device Wilo SK 602N/SK 622N for complete motor protection
- Wilo C protection module, 1~230 V

This circulation pump is used as part of medium and large heating and air conditioning systems. It is a reliable and proven equipment.

How to buy a circulation pump WILO TOP-S 40/10 DM PN6/10

You can buy a WILO TOP-S 40/10 DM PN6/10 pump by making a purchase directly on the website of the online store, or by calling by phone in the Contacts section. Our manager will contact you and arrange delivery or reserve the goods for pickup.

If you need a drainage pump in Moscow or the Moscow region, we offer delivery around the city and in the nearest suburbs. For buyers from other regions of Russia - delivery by any transport company or postal service as agreed.

Payment for goods is carried out in the following ways:

1. Payment in cash.

When picking up from the store, or upon receipt of the goods by the courier.

2.Bank transfer - payment according to the invoice for payment as for legal, and for physical persons.

When placing an order, select the payment method: "Bank Transfer".

After confirming the order, our specialist will contact you and after agreeing on all organizational issues, you will be sent an invoice by e-mail, which you can pay in any bank or through an internet client.

1. Pickup.

Pickup times and times:

PVZ m. Sokol: you can pick up the order the next day after the order from 10 a.m. to 6 p.m. weekdays. The order is stored at the point of issue for 3 working days.

Pickup cost:free of charge when ordering from 1,000 rubles. (when ordering less than 1,000 rubles - pickup cost - 80 rubles)

Attention! In the point of issue of orders are only pre-reserved goods!

The employee of the point of issue does not give any advice on the goods!

The route map to the pickup point is located on the page CONTACTS

2. Delivery in Moscow within the Moscow Ring Road

The following items are delivered free of charge:

Kerosene heaters brand "Sengoku" ("Sengoku")

Cost of delivery:

If your order weighs more than 20 kg - the manager will calculate and inform you the cost of delivery additionally!

Time of delivery:

Delivery is carried out on weekdays from 10:00 to 20:00.

Behind 30-90 minutes, the courier calls you and agrees on the exact time of arrival.

Exact delivery address (city, street, house number, apartment or office number, intercom code)

The contact person

Contact phone numbers

3. Delivery outside the Moscow Ring Road and further in the Moscow region

Cost of delivery:

If the WEIGHT is not indicated in the product card, you can check it with the manager.

If your order weighs more than 20 kg - the manager will calculate and inform you the cost of delivery additionally!

Time of delivery:

Delivery is carried out within 1-3 working days from 10:00 to 20:00 no reference to noon.

Behind 1-2 hours before delivery, the courier will call you and agree on the exact time of arrival.

What is important to specify when ordering:

Exact delivery address ( city, district, locality, street, house number, apartment or office number, intercom code)

The contact person

Contact phone numbers

4. Delivery to the regions of the Russian Federation

We can send you the goods of any of the following companies.

CDEK - www.cdek.ru

First Forwarding Company (PEC) - www.pecom.ru

The estimated cost of delivery of goods can be found on the websites of these companies or contact our specialist.

What is important to specify when ordering:

Passport series and number, date of issue

Full Name

City of receipt

If none of the above methods suits you, we will send the goods to your address in another way - as agreed with you.

The coolant in the heating system must constantly circulate. Its movement is provided by circulation pump, which is indispensable in heating systems with forced circulation. But in addition to the movement of the coolant in the system, the circulation pump can perform an energy-saving function, which is especially relevant in old systems of large diameter pipes.

How does this happen? If you buy a circulation pump and install it in the heating system, then the coolant will move faster and return to the boiler without having time to give up all its heat. Accordingly, significantly less energy is required for reheating, which can result in savings of 20-30%.

Circulation pump prices and types

Circulation pumps are of two types: with a wet and dry rotor. In "wet" pumps, the rotor is separated from the electric motor by sealing rings, and the function of lubricating and cooling the motor is performed by the coolant. Its advantages are:

• noiselessness;
• compactness;
• economy,
• as well as long uninterrupted operation and ease of repair and operation. The disadvantages of "wet" type pumps include low efficiency, which limits their use in domestic heating systems.

In "dry" type pumps, the rotor does not come into contact with the coolant. They are much more powerful than "wet" ones (if the efficiency of "wet" is about 50%, then the efficiency of "dry" is 80%), which determines their use in industry. "Dry" pumps create noise and are demanding on the purity of the coolant.

When choosing a circulation pump, the price plays an important, but still secondary role. In the first place are the features of the heating system of a particular building and the pressure characteristics of the pump itself, which must provide the necessary amount of heat to maintain the required microclimate. The calculation is usually made by heating engineers who take into account the average outdoor temperature, wall, roof and floor material, characteristics ventilation system and other characteristics. The result of the calculation is the indicator of the volumetric supply of the coolant to heating system.

An important factor when choosing a pump is also its flow rate, or the dependence of the power of the heat source on the difference in water temperatures in the supply and return pipelines. As for manufacturers pumping equipment, pumps of European manufacturers GRUNDPOS and Wilo have excellent characteristics, also good quality Korean KITURAMI are famous. Among Russian companies, the undoubted leaders are Gileks and Espa, which provide comparative quality at a lower price.

Wilo TOP-S-40/10-EM is a circulation pump with a power of 0.35 kW, designed for use in heating systems, cold or hot water supply, in household or industrial systems air conditioning and fluid circulation systems.

Advantages:

Maximum efficiency due to ECM technology

High-efficiency pump especially for cottages and semi-detached houses, as well as for houses with two to six apartments

Integrated motor protection

LED display for setting the setpoint and displaying the current power consumption in watts

Quick electrical connection with Wilo-Connector

Flexible mounting options thanks to compact design

Very high starting torque for safe starting

Key Features:

Pump type: circulation
. Power consumption: 0.35 kW
. Rated power: 0.61 / 0.68 kW
. Throughput: 21 m3/h
. Maximum head: 10 m
. Voltage, V: 1~230
. Water quality: clean
. Maximum working pressure, bar: 10
. Permissible fluid temperature: -20°C to 130°C
. Outlet diameter: 1¼"
. Body material: cast iron
. Degree of protection: IP X4D
. Motor protection: built-in
. Rotor type: wet
. Pump installation: vertical
. Mounting length, mm: 250
. Weight: 15 kg
. Warranty: 1 year
. Country: Germany

• Delivery in Moscow 500 rubles
• Delivery within MO: 500 rubles + 50 rubles/km from Moscow Ring Road
• Delivery across Russia - transport companies
• Pickup: free

You can always specify a convenient delivery date for you (but not less than two business days) when agreeing on an order. Delivery of goods is carried out from Monday to Friday from 12:00 to 18:00

Delivery at a later or earlier time interval is agreed individually with the Buyer and is carried out for an additional fee.

Delivery on Saturday, Sunday and public holidays (as agreed)

Delivery on weekends and holidays is carried out at the request of the buyer, upon confirmation of the application for 2 working days.

Delivery on weekends and holidays is carried out at the request of the buyer for an additional fee, upon confirmation of the application for 2 working days.

Pickup

You can pick up the order yourself at the pickup point at Podymnaya St., 14 building 37.

Self-delivery of goods is carried out daily except Saturday, Sunday and holidays after confirmation by the sales officer.

Delivery terms

Delivery of orders placed through the Ecolife online store is carried out to the entrance or to the place where a truck can easily drive up and where you can unhinder the unloading of goods, as well as to the points of acceptance of cargo by transport companies transporting to the regions.

The driver of the delivery service can provide the services of a loader only by prior arrangement for an additional fee.

Upon delivery to the Buyer, the seller is responsible for appearance goods until the moment of its acceptance and transfer to the Buyer. Claims for the appearance and configuration of the delivered goods, in accordance with Art. 458 and 459 of the Civil Code of the Russian Federation, it is possible to present only before the transfer of the goods by the Seller to the Buyer. From the moment of acceptance and transfer of the goods, the seller's obligation to transfer the goods is considered fulfilled. The fact of acceptance of the goods by the Buyer is confirmed by the signature in the "Purchase and Sale Agreement" in the column "Acceptance and Transfer Certificate". If the appearance or packaging of the goods do not correspond to the proper quality, the buyer has the right not to accept the goods and not to sign the documents.

Payment

Currently, the Ecolife online store offers the following payment methods for orders:

• Cash on delivery
  Upon delivery of the order, as well as upon self-receipt of the goods at the pickup point, you can pay for the order in cash at the time of its receipt.
• Payment by bank transfer
  Payment by details to the company's account upon completion of the receipt in the bank or through the Internet bank. After placing an order, you will receive an invoice for payment and a receipt with our details. The prices indicated on the invoice are final and include VAT. The issued invoice is valid for 5 calendar days. This payment method can be used through any bank operating in Russia.
  Note:
  Banks charge a fee for money transfers. Check with the bank where you plan to pay the receipt for information on the amount of the commission fee. When choosing this payment method, please wait until you receive an invoice.