Advertising on the portal

The dimensions of the rings for wells are much larger than the height and two diameters

Of course, you can equip a well in the country in various ways. But when industrially produced well reinforced concrete rings have become so easily available, it just begs to be used. It remains only to find out what sizes of well rings are offered by manufacturers, and coordinate your further actions with these parameters.

Details about the most important

Not only the production of the rings themselves, but also the floor slabs, is subject to the standards defined in GOST 8020-90. First of all, the brand of cement used for the production of these products is regulated - this is from M200 to M500 and no less.

A little introduction to the subject

In addition, the conventions adopted to represent a rather large produced nomenclature are defined:

  • KS - Wall - for narrow necks and working chambers of wells;
  • KO - Reference;

  • KVG - for Water and Gas - are recommended for use as working chambers not only in water supply, but also in gas pipeline networks;
  • KFK - for Fecal Chambers - these are already directly for sewage;
  • KLK - for Storm Sewers - this also includes drains.
  • PD or PN - Bottom Plates "- which is no longer particularly relevant for water wells;
  • PC or PP - Floor Slabs - in addition to the entire range.

The standards also stipulate symbols that determine the characteristics of each ring.

So, the designation KS-10-9 defines:

  • the diameter of the proposed wall option is 100 cm;
  • height - 90 cm.

The scatter of parameters is quite large:

  • in diameter - from 70 to 200 cm;
  • in height - from 10 to 90 cm;
  • by weight, thus - from 43 to 1470 kg, when either a conventional mount is suitable for installation or a solid crane is required.

Helpful advice!
If you want more comfort during the construction of the entire vertical structure and you are not satisfied with such a weight of iron and concrete products, we advise you to pay attention to.
According to their indicators of strength and reliability, they are in no way inferior to reinforced concrete, but they have an order of magnitude less weight and are noticeably cheaper.

Details about the main

Among all the possible details used at are the main ones, so the conversation is, first of all, about them.

Dimensions

We give the sizes, from lighter products to more complex ones:

  • KS-7-1:
    • height (mm) - 100;
    • wall thickness (mm) - 80;
    • inner diameter (mm) - 70;
    • weight (kg) - 46;
    • price (rub) - 339;

  • KS-7-1.5: 150 / 80 / 700 / 68 / 379;
  • KS-7-3: 350 / 80 / 700 / 140 / 589;
  • KS-7-5: 500 / 80 / 700 / 230 / 897;
  • KS-7-6: 600 / 100 / 700 / 250 / 910;
  • KS-7-9: 900 / 80 / 700 / 410 / 1287;
  • KS-7-10: 1000 / 80 / 700 / 457 / 1495;
  • KS-10-5: 500 / 80 / 1000 / 320 / 1259;
  • KS-10-6: 600 / 80 / 1000 / 340 / 1279;
  • KS-10-9: 900 / 80 / 1000 / 640 / 1769;
  • KS-12-10: 1000 / 80 / 1200 / 1050 / 2730;

  • KS-15-6: 600 / 90 / 1500 / 900 / 2340;
  • KS-15-9: 900 / 90 / 1500 / 1350 / 3059;
  • KS-20-6: 600 / 100 / 2000 / 1550 / 3835;
  • KS-20-9: 900 / 100 / 2000 / 2300 / 4745;
  • KO-6 7: 120 / 580 / 600 / 369.

Some remarks

This whole mess of numbers needs some explanation:

  • Firstly, the given price is indicative and may vary by 20-30% in different regions;
  • Secondly, the maximum possible height of the products is 900 mm / 90 cm;
  • Thirdly, the minimum height value is 100 mm or only 10 cm, which turns out to be very convenient when building wells in suburban areas - you can always pick up rings of different heights to fit them along a dug well; here the main thing is not to make a mistake with the diameters, both external and internal.
  • Fourth, based on the last remark, we conclude that rings with a thickness of 80 mm and an inner diameter of 700 mm could have the greatest distribution in the construction of water wells, if not for a too small diameter, and so, you have to choose a diameter of 1200 or 1500, but at the same time adjust the height of the recess.

Helpful advice!
When looking at price lists, pay attention not only to the diameter of the rings for the well, but also to the prices.
And, most importantly, specify whether the price includes VAT and delivery of the product to the installation site - this is essential for such weights.
In the proposed table, both of these amounts are already included in the final price form.

findings

The diameter of the well rings and their height are the first indicators by which you choose these products. Be sure to determine the requirements for the future well before starting earthworks in the well in accordance with the dimensions of the rings intended for use.

In this regard, pay special attention to the depth of your aquifer and its thickness, coordinating these data with the height of the choice. Watch the additional video in this article, it will help you more accurately navigate the proposed numbers.