Pump for increasing water pressure in an apartment or a private house
Often, water supply systems have insufficient pressure, which complicates not only the adoption of water procedures, but also the operation of auxiliary household appliances. For example, the correct operation of a washing machine or a shower cabin may be impaired. To get out of this situation, you have to use a pump to increase the water pressure. In an apartment or house in such situations, it is indispensable.
Many residents of houses and apartments face weak water pressure.
Devices that increase the pressure in the plumbing system are small structures with an engine that operates from a conventional electrical network. Installation of the device is carried out by inserting into the pipeline. During operation, the torque from the rotor is transferred to the impeller, which creates additional pressure.
All products can be divided according to the method of management:
- hand-held devices are switched by a person during operation for a certain amount of time;
- automatic devices switch independently, as they have a special sensor.
Related article:
This unit is installed in most closed heating systems, so it is extremely important to know how to choose and calculate it correctly. Our review will help you!
Another classifying feature is the type of cooling;
- wet rotor models operate almost silently, as they pass liquid directly through themselves;
- products with a dry rotor create noise during operation, but are more productive.
Note! Before purchasing a pump to increase the water pressure in an apartment or residential building, it is also necessary to take into account the permissible temperature of the working environment. However, there are also universal devices that operate in a wide range.
Appliance Requirements
If the problem associated with insufficient pressure in the water supply system is solved by using a special pump, then you should understand what requirements are placed on it. They basically boil down to this:
- uninterrupted work;
- optimal pressure of the working fluid;
- affordable cost;
- required performance.
Note! If water does not reach the upper floors of an apartment or a private house at all, then instead of a conventional pump, it is recommended to purchase a special station. They create the necessary pressure.
Various models of pumps for increasing water pressure: prices and manufacturers
High-quality devices that are able to serve properly for many years are produced by trusted manufacturers. In this regard, it is proposed to study the prices for pump models of well-known brands. The following products are popular in the modern market.
Model Wilo PB-088EA
Of all the water pressure booster pumps Willo PB-088 EA can be considered the most suitable for domestic use. The device is installed on a pipeline with a working medium up to 60 degrees. It is quiet, so its operation is quite comfortable. The device is capable of functioning in two modes at once - automatic and manual.
The performance of the device is 2.1 cubic meters. m in one hour. You can buy it in a specialized store for about 3500-4000 rubles.
Model Grundfos 15-90
As an alternative for home use, the Grundfos 15-90 water pressure booster pump model can be used. Its characteristics are very similar to the above products. However, its cost is somewhat higher. It reaches 6000 rubles.
Other analogues
The range of products is not limited to the models listed above. The table shows products from other manufacturers, the quality of which is beyond doubt.
| Image | Model | Power in watts | Productivity liters per hour | Cost in rubles |
|---|---|---|---|---|
| Vodotok 15GZ-15 | 120 | 1 500 | 3 100 | |
| Unipump UPA 15-90 | 120 | 1 500 | 6 200 | |
| Unipump UPA 15-120 | 120 | 2 700 | 11 500 | |
| Comfort X15G-10B | 90 | 1 200 | 2 500 | |
| Comfort X15G-18 | 260 | 1 800 | 4 600 |
Note! It is impossible to buy a high-quality pump for increasing water pressure for a small amount of money. If the cost of the product is much less than the minimum amount indicated in the table, then it is better to refuse to purchase the product.
How to install a pump to increase water pressure in an apartment or house
It is quite possible to independently carry out work on the installation of the device. However, it is still necessary to familiarize yourself with the basic principles of installation in order to avoid catastrophic errors. Refusal to involve professional workers will save on installation.
Introduction to the installation process
When installing a pump to increase water pressure in a house or apartment, a small piece of pipe is cut out at the inlet of the water supply. The device itself is connected directly to the two ends. If the pipes are made of plastic, then you may need a special soldering iron.
The device must be inserted between cut pipes
When docking with a pipeline, you can confuse the direction of water movement through the device, so you should carefully look at the instructions that come with the product to improve the pressure. After the installation is completed, the device is connected to the mains.
Related article:
If the water pressure is normal or even strong, then you just need this device. And why you will learn from our separate review.
A properly installed pump will provide your home with water for a long time, if you follow these recommendations:
- it is desirable to protect the mounted equipment from blockages by placing a coarse filter at the inlet;
- it is mandatory to install shut-off valves in front of the pump so that it is possible to carry out preventive measures;
- the unit must be located in a heated room, which is protected from moisture;
- the first time it is necessary to check the device for leaks in order to detect malfunctions in time.
Note! It is advisable for the safe operation of a device that increases the pressure in the plumbing system to equip a special one that will be connected through a separate RCD.
Main selection criteria
When purchasing a product to increase the pressure in the water supply network, certain points must be taken into account. Usually six criteria are taken into account.
- Power indicator. The value of this parameter will determine how many consumers can operate the device at the same time.
- The level of noise generated during operation. Models can operate loudly or very quietly. This primarily affects the comfort in operation.
- Possible height of water rise. Some devices may not reach the working environment directly to the required level.
- Device dimensions. The possibility of placement in a certain room will depend on the size of a particular model.
- Cross section of connected pipes. If this criterion is not taken into account, installation problems may occur.
- Producer reputation. Mostly high-quality products are produced by companies that are highly popular in the market.
Summarizing
With the advent of pumps to increase water pressure in apartments and detached houses, the shortcomings of plumbing systems can be completely eliminated. Such devices are available from an economic point of view to a wide range of consumers, and therefore are in demand. In some cases, it is better to purchase a device to improve the pressure yourself than to solve the problem with specialized services.
