Advertising on the portal

How to make a garden wheelbarrow with your own hands - an overview of the best ideas for giving (135 photos). DIY garden wheelbarrow: ideas and materials How to make a garden wheelbarrow with your own hands drawings

A cart is a necessary attribute of any household. Made by yourself, it costs less than a purchased counterpart.

Another advantage of a homemade cart is that it is made strictly according to the needs and meets the required needs.

Having studied different creation technologies, it will not be any particular problem to make a multifunctional cart with your own hands.

What are carts

Metal and wood are the main materials used in the manufacture of carts, as they have the necessary strength characteristics.

Trolleys differ from each other in the number of wheels and dimensions. You can make your own:

  • one-wheel cart;
  • two-wheeled cart;
  • cart in the form of a platform on four wheels;
  • folding cart.

How to make a two-wheeled do-it-yourself cart

Making your own wooden cart with two wheels is not at all difficult. Woodworking requires standard tools. But the strength, capacitance and performance characteristics of a wooden trolley are in many ways worse than those of a metal counterpart equipped with a large number of wheels.

Manufacturing instruction:

  • To create a frame, we take a board measuring 7 × 7 cm. We connect all parts of the frame with screws, strengthen it with additional details;
  • We fasten a pair of rails for bearings to the bottom of the structure;
  • We make the handle of the cart metal. This will increase the resistance to stress. An old bicycle handlebar or a thick steel bar is suitable as a handle;
  • We install plank boards. Their size affects capacity. A reliable product is made by a strong frame and stably attached wheels.

If you have a moped axle lying around, then it can be used instead of boards with bearings.

We make a cart for transportation on four wheels

Four wheels allow you to increase the capacity, strength and service life of the trolley.

Four-wheeled products are made exclusively of metal. They can withstand weight up to 100 kg. You will need a tool kit to assemble them.

The manufacture of four-wheeled bogies includes the following steps:

  • We carry out all the necessary calculations of the cargo platform;
  • We make a container in which the cargo will be transported. The size of the frame will depend on its parameters.;
  • We install the frame structure by welding. For the frame, you can use the remains of pipes. We weld a handle to the frame;
  • We weld to the bottom of the wheel structure;
  • We “shoe” the wheels in pneumatic tires. This will increase the weight of the cargo, which the trolley is designed to carry, up to 80 kg.

We make a folding cart

Such a wheelbarrow can withstand at least 50 kg of cargo. Its main advantage is its compact size.

To make a folding cart, you must follow the following procedure:

  • Prepare pipe cuts with a thickness of at least 2 mm;
  • Draw a frame structure template on a scale of 1: 1;
  • Weld the hinge bushings to the platform frame, and then to the main structure;
  • Clean and polish all seams.

Making a cart with one wheel

The best option is to use wood for the manufacture of a unicycle cart.

Then we fasten the frame structure to the cargo platform with screws. The cart is ready!

If you intend to carry heavy loads, then a metal one-wheel cart will suit you. In addition to standard tools, you will need machines for welding and cutting metals.

First of all, we make a cargo container. It is advisable to use steel sheets with a thickness of at least 2 mm. Next, we weld the handles and the running structure to the platform.

Note!

Bicycle, moped or motorcycle wheels are perfect. The cargo area can be made from a metal barrel.

Everyone can make a cart with their own hands. It is only necessary to familiarize yourself with the rules of creation and safety precautions. They and drawings of various carts can be found on the World Wide Web. Good luck in your endeavors!

DIY cart photo

Note!

All owners of personal plots are familiar with a simple device that makes life much easier - a garden wheelbarrow. It is irreplaceable in a garden and a kitchen garden, at construction of the house, a barn or garage. In a word, it comes to the rescue when it is necessary to transport a large amount of cargo over a short distance. Anyone who does not yet have a wheelbarrow, but plans to purchase one, should know what types it is, as well as what advantages and disadvantages it has. The owner who knows the account of his money will be pleasantly surprised by the fact that you can make a garden wheelbarrow with your own hands. So, we will discuss these and other questions in this article.

Types of garden wheelbarrow designs

Garden wheelbarrows have a lot of design features, depending on which they are classified into separate types:

  • Wheelbarrows have one wheel.
  • Carts - have two or more wheels.

It is the wheelbarrows that have the greatest maneuverability and reliability, as well as the minimum track size from the wheels. Thanks to the latter factor, a garden wheelbarrow can be transported even along a narrow path between garden crop beds. It is very easy to unload its container - just lift its handles to a certain height and tip it in the right direction. All this cannot be said about multi-wheeled carts.

A one-wheeled wheelbarrow has one significant drawback - it is very unstable when loaded, so it will take effort to maintain balance when transporting cargo. Also, the stability of the structure must be monitored during its loading and unloading, otherwise it will roll over.

The advantage of two-wheeled carts is their stability. Thanks to this, they can carry heavy and bulky goods without fear that they will roll over.

According to the type of handle, garden carts are also classified:

  • With one cross.
  • With two longitudinal

The transverse handle is much more convenient to use - you can take it with one hand and pull the cart, but two longitudinal ones are only suitable for pushing the load in front of you.

Wheelbarrows are classified according to the type of stops:

  • With two stationary
  • With one folding.

Stationary stops are inconvenient in practice - when moving the cart around the garden, they will cling to uneven ground.

Wheel size and damping

One-wheeled wheelbarrows create a lot of pressure on the soil and create a deep rut - this worsens their patency.

Two-wheeled wheelbarrows are optimal for soft soils - they evenly distribute the load and easily overcome all irregularities.

The bigger the wheels, the better. It is desirable that they be inflatable and mounted on a metal rim.

The choice of material for the body of a garden wheelbarrow

Aluminum is lightweight, does not require painting and is not afraid of corrosion. Suitable for carrying fertilizer, compost, etc.

Steel - has high strength, however, is heavy and resistant to rust. Suitable for transporting heavy building materials.

Making a metal wheelbarrow with your own hands

To make a wheelbarrow from metal, you need a sheet of steel 1 × 2 meters in size and 1 mm thick. Pneumatic wheels with a diameter of 35-40 mm with bearings are suitable as a chassis. The carrier axle tube must be tightly inserted into the latter. Wheels must be secured with a nut or cotter pin.

The volume of the trolley bowl is selected depending on the needs, but most often it is 70-110 liters.

Before starting work, it is necessary to make a preliminary sketch. It indicates the dimensions and configuration of the bowl in expanded form, handles, stops and a pair of wheels with an axle.

The next stage is cutting a sheet of steel and cutting it with a grinder. A bowl is made from the obtained elements using a welding machine.

Support axle stands can be easily built from a 25×25 mm corner or a metal pipe, having previously welded a ring of the required diameter to it. Handles and supports are made of thin tubes - this will facilitate the entire structure.

Homemade garden wheelbarrow made of wood

Making a garden wheelbarrow out of wood is even easier - you don’t even have to make drawings for it.

For it, hardwoods are used - oak, maple, elm, birch. To create a wheelbarrow, you will need the following materials - boards, bars and screws.

First you need to take the boards and collect them in the form of a box.

The basis of the wheelbarrow will be represented by two long beams. It is to them that the body of the car is attached with screws. The bars act not only as the basis of the wheelbarrow, but also serve as handles on one side and a wheel holder on the other. To do this, they are bred to the sides on one side and vice versa, brought together in the place where the wheel will be attached. The wheel itself can be anything - in our case it is welded from metal rods, but you can take any suitable one. Holes are drilled in the bars and an axle is inserted on which the wheel will hold.

In the place where the handles for the wheelbarrow will be, special recesses are made on the bars so that the handles are conveniently fixed in the hand. The final stage of work is the attachment of wedges-supports (can be metal) with bolts.

Components for wheelbarrows from improvised means

If it is not possible to buy a wheel for a cart, you can make it yourself. It can be made of wood (hardwood only) or other materials. To organize the capacity of the wheelbarrow, plastic troughs cut along the barrel, basins, etc. are suitable.

Of course, you can buy all the components in the store, but by showing imagination and ingenuity, you can build a fairly high-quality device with your own hands from improvised materials, while saving good money.

Dear readers, comment on the article, ask questions, subscribe to new publications - we are interested in your opinion :)

Making a garden wheelbarrow for transporting goods with your own hands is not too difficult. Most often, at home, the simplest designs from available materials are performed. Nevertheless, a properly made wheelbarrow is distinguished not only by ease of use, but also by sufficient durability.

Characteristics of the types of wheelbarrows

Garden and construction wheelbarrows can be easily made by yourself. As a rule, such structures are used to transport almost any small-sized cargo over short distances. Such equipment is a whole class of various low-mechanized tools and can be an excellent help in the backyard or summer cottage, as well as the construction site.

A properly made wheelbarrow helps to remove garbage from the territory or transport sand, gravel, other bulk materials, as well as manure. There are a number of models, including the Kravchuchka cart, that can be made by yourself with minimal time and effort.

How to choose a car (video)

Construction

The frame base of construction wheelbarrows is most often made of metal in the form of steel pipes. This design has a fairly high rigidity, which is due to several connections located under the body and created by means of corners, tubes or plates made of durable and reliable metal. The design can be made on one wheel or on two wheels.

Building products are intended for the transportation of heavy materials, represented by crushed stone, sand, stone and brick, as well as construction debris. Their design is reinforced and the volume of the body can be 100 liters with a maximum load capacity in the range of 200-300 kg. The wheelbase is represented by cast products, but sometimes pneumatic varieties.

As practice shows, "reinforced" models are most suitable for intensive use and are designed for high static and dynamic loads, and are also characterized by durability, increased strength and reliability.

Garden

Garden wheelbarrows also consist of parts such as a metal frame, body and wheels. Most often, the body part is made on the basis of light and reliable aluminum, therefore when choosing, preference should be given to aluminum sheets of sufficient thickness. Particular attention is required to ensure the rigidity of the entire structure being created.

To date, several varieties of garden wheelbarrows are widely used, which differ in the type of thrust devices, as well as the number of wheels and the type of handle. The design can have a folding or permanent stop, and the most convenient are models with an H-shaped or U-shaped handle with a sufficient opening. Handles can be made of wood or metal, but the metal version is the most durable.

The capacity of garden tools is measured in liters, but the most acceptable and convenient in operation are models with a useful volume in the range of 60-150 liters. The load capacity is calculated in kilograms and can vary between 100-200 kg. More or less lifting models of garden wheelbarrows are very inconvenient and impractical to use.

Criteria for choosing wheelbarrows when buying

When choosing a ready-made construction for garden or construction purposes, first of all, you need to pay attention to the volume of the body. It is from these indicators that the usability will directly depend. Depending on the volume indicators, the number of wheels should be estimated, as well as the presence or absence of bearings in the design of such inventory.

Load capacity is also important when choosing. It is important to remember that a high-quality and reliable, durable and easy-to-use wheelbarrow cannot be very heavy. Usually, the standard mass of a wheelbarrow does not exceed 25-30 kg. The most convenient models of gardening and construction equipment are sold in a disassembled state, which makes it easy to transport such a product to its destination.

The range of modern wheelbarrows is most often represented by:

  • one-wheel and two-wheel models;
  • models with a lightweight or reinforced frame;
  • models with a body volume of 65-100 l;
  • models with a load capacity of 80-300 kg;
  • models with pneumatic or solid rubber wheels.

One-wheeled models can turn around in one place, move along fairly narrow paths or along the track of the ridges. Two-wheeled products are characterized by significant load capacity and stability, as well as improved cross-country ability. Before purchasing, you need to check the accompanying documentation, and be sure to carefully check the availability of all components.

Wheelbarrow do it yourself (video)

How to make a garden wheelbarrow out of metal with your own hands:

Recently, self-made metal wheelbarrows, which are distinguished by reliability, durability and ease of use, have gained particular popularity and distribution.

Drawing up a drawing and other preparatory work

For self-production, you can use bed metal arms and legs, as well as 1mm thick sheet steel and standard motorcycle wheels. Before assembling the garden cart, it is recommended to cover the cleaned metal with primer and paint.

Wheel making

Wheels for garden carts are best purchased ready-made. Bicycle or moped wheels are also well suited for this purpose. Pneumatic wheels have proven themselves to be the best during operation, which, if necessary, can be pumped up with a pump. They can significantly increase the carrying capacity of the wheelbarrow, and also allow you to increase the patency on uneven surfaces or soft soil.

Stages of installation and assembly of the trolley

A pair of metal bed legs and arms are used to make the frame base of a garden or construction cart. Further assembly is carried out in accordance with the following simple recommendations:

  • cut out the walls and the bottom of the trolley body from a durable steel sheet;
  • weld the joints of all parts using spot welding;
  • install the body part on the frame base and fit all the parts along the edges of the box;
  • bend the walls of the container to the frame and combine them with a weld;
  • weld all joints solid;
  • make the bridge part of the wheel pair in the form of an axle and hubs using legs from a metal bed;
  • axes are connected on both sides to the pipe;
  • turn the body part upside down and weld the bridge;
  • make staple-like linings and fix the structure;
  • attach to the wheel axle.

At the final stage of manufacturing, a handle is made from the bed legs and back, after which it is welded in a position convenient for the operation of the trolley. The support leg must be raised to minimize the risk of braking while driving.

Independent production of a wheelbarrow from a barrel

To make such a design with your own hands, you need to cut the barrel along its height. Then a frame base is made of metal in an A-shape.

Racks should be welded to the frame base, after which the body from the barrel is fixed on the base. A wheel is fixed in the bow of such a cart, and the frame in the opposite part of the structure serves as handles. Before use, it is recommended to clean the rust well, and then cover the trolley with primer and paint for metal.

We make a wooden wheelbarrow for a summer residence

At the first stage, a detailed drawing is made, and the following elements are being prepared:

  • a pair of planks for the bottom measuring 40.6 cm;
  • a pair of side walls measuring 58.4 cm;
  • a pair of front and rear walls measuring 48.3 cm;
  • a pair of handles measuring 121.9 cm;
  • axle for a wheel measuring 12.7 cm;
  • a pair of wheels with a radius of 2 1/2 ʺ;
  • a pair of support legs measuring 2.54 cm.

At the first stage, you need to prepare the materials by marking out in accordance with the indicated dimensions and cutting the blanks. It is important to round the side walls, and make the front and back walls semicircular. Before assembly, holes for fasteners are drilled.

The technology for self-assembly of a wooden product is as follows:

  • place the bottom planks on the side elements, and fix them with self-tapping screws or galvanized nails;
  • the edges of the slats are aligned to one level;
  • holes are drilled on the front and back walls, and they are connected to the bottom and side walls;
  • a wheel is marked out from several layers of thick plywood or boards, after which the layers are glued together;
  • the center is marked in the wheel and a hole is drilled into which the axle is inserted;
  • handles are fixed on the body with self-tapping screws or galvanized nails;
  • after fixing the handles, markings are made for drilling holes for installing the wheel axle.

You can align the installed wheel with locking plates or stop screws, which are placed in the holes in the handles. It is advisable to round the ends of the handles, and then sand them with sandpaper. The joints of all parts on the body are recommended to be treated with glue, which will ensure their tightness. A fully finished product must be treated with stain or painted with water-repellent paint.

Homemade decorative wheelbarrow for flowers

The use of a cart in the decoration of a local area or backyard landscape involves not only the choice of the type of cart and its overall dimensions, but also the competent drawing up of a drawing, manufacturing, installation and finishing decoration with flowers. For decorating small summer cottages, small classic carts or ordinary wooden three-wheeled cars are ideal, which will not clutter up a small area and become its original decoration.

A template is being prepared for the manufacture of wheels, and on sheet plywood a wheel circle of the required diameter is drawn, divided into eight equal parts, and then connected to each other. To connect the wheel spokes, a small wooden chock is being prepared. Knitting needles of the required length are cut from thin cuttings, and holes are made in the bars and chocks for fixing the knitting needles. The assembly of the wheel is carried out using a special adhesive, after which it dries, grinding is carried out and the finished product is varnished on wood.

The body part is made of wooden boards and bars. The frame base is assembled in accordance with the prepared drawings using an adhesive, galvanized nails and screws. The bottom and walls of the completed frame base are covered with boards, which must be securely fixed, and then sanded and varnished.

The assembly of the entire decorative cart must be carried out similarly to the designer. Completely finished and varnished or painted wheels must be fixed on axles made from ordinary wooden cuttings. The bogie body is mounted on the axle in such a way that it stands exactly on special wooden chocks. All joints must be abundantly filled with adhesive, but it is best to use nails, screws or any other available fasteners for the connection.

The finished decorative cart is installed in a pre-selected place, after which it is decorated with flower pots that can be installed not only in the body, but also around the landscape decor element.

How to make a universal dump truck (video)

Properly made garden or construction cars with their own hands are not inferior in their parameters to ready-made, factory designs. Such trolleys are characterized by reliability, durability and can last for quite a long time, greatly facilitating the implementation of all garden or construction work, as well as saving time and effort.

When working in the garden or at a construction site, we often have to use various kinds of auxiliary equipment. It is necessary to perform certain types of work. One of its types, which is used both in gardening and in construction, is the most common wheelbarrow. Recently, they can be easily purchased at the store.

Unfortunately, the wheelbarrows presented in the store have two drawbacks. The first is that they are not always made of high-quality and durable materials, which is why their service life may be short. The second is that their cost is often too high, which makes their purchase unprofitable. Today we will talk about how a construction or garden wheelbarrow is assembled with our own hands from improvised materials.

Tools and materials

So, to get a high-quality garden or construction wheelbarrow, you must carefully consider the selection of materials, as well as have all the necessary tools available. Let's start with the wheels. Any garden or construction cart assumes their presence. Depending on the designs and preferences, they can be made of plastic, rubber, molded or pneumatic and have a protector.

If we talk about plastic, then this option is suitable in order to facilitate the design. But its carrying capacity will be small.

You can just buy wheels in specialized garden centers, markets or somewhere else. The best option is to buy solid polyurethane wheels and high-quality 4-ply rubber tires. Much will depend on the number of wheels. A one-wheeled wheelbarrow will be simpler and cheaper, but its carrying capacity will not be as high, and more weight will fall on the hands of a person. A two-wheeled one does not have such shortcomings, but it costs more.

It is also easy to allow the use of wheels from any equipment or bicycles. The most popular option is to take wheels from a moped. You can come up with some exotic options. For example, a variant on tracks.

But here it should be remembered that cast wheels are almost the most durable solution that does not deform even under heavy loads, and the rubber chamber, inside which there is air, has excellent shock absorption and provides a smooth ride.

The next important component is the body material. Factory models usually have a steel or aluminum body. At the same time, a bowl made of aluminum will be more durable, and a steel version must have a zinc coating. But that's not all. Other materials may also be used.

  • Sheet metal must be galvanized or powder coated to prevent rust and corrosion from developing and spreading.
  • The body can be made of wood. This is a fairly affordable material, if you look at the cost. But it must be treated with various septic tanks and substances in order to prevent its destruction under the influence of natural phenomena. It must also be dyed.
  • Plastic variant Lightweight and corrosion resistant. At the same time, it is extremely susceptible to mechanical damage.

You can come up with a simple option - to assemble a wheelbarrow from old structures. For example, in the form of a half from a barrel or a metal headboard from a bed. If we talk about the shape of the body, then it can be trapezoidal, with a beveled front or a traditional square.

Now let's talk about pens. They are most often made of metal with special rubber pads that are light and do not slip off the hands. All wood variants can be supplied with the same handle.

Also a good option would be corrugated nozzles made of rubber or plastic, in which there are special notches for fingers.

Speaking of the materials that will be needed to assemble homemade cars, the list will be something like this:

  • roulette;
  • ruler;
  • hammer;
  • marker;
  • hacksaw for metal or wood;
  • welding;
  • angle grinder;
  • spanners;
  • screwdriver

If you need to paint the wheelbarrow or treat it with something, then it will not be superfluous to prepare brushes of various sizes. And most importantly, what you will need to have at hand is drawings, where all dimensions will be indicated, including the actual length, width and height of the structure that should be obtained, as well as the physical parameters of various parts.

How to make at home

Now let's talk about how to make a wheelbarrow at home. Due to the impossibility to cover all the options for creating such a transport, we will limit ourselves to a few solutions that are considered the most simple, affordable and popular.

From the barrel

To assemble a wheelbarrow from a barrel, a container made of any material - plastic, wood or metal - is suitable. Here you only need to consider what goods will be transported in it. It will be especially difficult to work with a wooden version. From an ordinary barrel, you can assemble two wheelbarrows at once, since it will still have to be cut in half. The order of assembly will be very simple:

  • cut the selected barrel in half into two equal parts;
  • we make a frame, which in its shape should resemble the letter "A";
  • now it is necessary to attach racks to the frame on the sides, which will fix half of the barrel;
  • in the place where the top of the letter will be, that is, in the bow, it is necessary to attach the wheel;
  • we make out handles, for which cellophane and electrical tape are suitable.

After that, a homemade car will be ready. As you can see, everything is simple and easy.

From the bike

You can also make a cart out of a bicycle. To be more precise, a special trailer is made for the bike, with which it is very convenient to go to the store, say, for shopping. To make such a simple wheelbarrow, you will need two wheels from a bicycle of the same size, several pipes with a round or square section. You will also need 4 thick metal plates, nuts, bolts, plywood or board, as well as welding, wrenches and a drill.

In order to start making a wheelbarrow, first we take metal plates, we make cutouts in them in size so that the wheel axles fit in them simply and well. On the basis obtained earlier, we lay plywood or dostochny flooring, put a box on it, a seat or what you need, depending on the goals. In order to fix the flooring on the frame, you will need to drill holes in the frame, and you can fix it with nuts and bolts. On this, the bicycle cart is ready. To make it, as you can see, is extremely easy and simple.

How to make a decorative model?

It should be said that a cart or wheelbarrow can be not only garden or construction. It can also perform a decorative function. For example, to be located in the garden and act as a decorative pot for some flower or shrub. The most interesting is the wooden version, because it is aesthetically very pleasing and great for shaping compositions. So, to make a decorative wheelbarrow you will need:

  • a piece of plywood;
  • pair of wheels;
  • threaded stud, which can be replaced with a pipe cut;
  • wooden bars.

First you need to make a frame. If there is a pipe, then we simply bend it into the shape of the letter P. It is easy to knock it down from the bars. After that, we drill holes from the bottom of the frame, into which the axle will then be inserted. In the role of it, a pipe or a threaded stud will be used. The axle that will protrude from the frame on both sides should be equal to twice the wheel width. The axle in the frame is fixed very tightly using self-tapping screws or bolts, which must be tightened with nuts. After that, it is necessary to put the wheels on the axle and secure them with cotter pins. You can buy them, or you can remove them from some unnecessary bike. If there are none, then you can form the wheel yourself from a piece of thick plywood. In order for it to last as long as possible, it is necessary:

  • first, plywood should be impregnated with drying oil or an antiseptic solution;
  • the wheel should be upholstered with a metal strip, put a tire on it and wrap it in thick rubber;
  • bearings should be installed in the holes for landing the wheels;
  • lubricate the wheels, as well as the axle with grease.

The last step remains - to form the body. It is also usually created from plywood. First you need to cut the bottom and firmly fix the part to the frame. If we talk about the sides, then there are different options. They are mounted motionless with respect to the bottom of the box or with the help of hinges, after which they can be folded. Fastening should be done as follows:

  • one side should be attached directly to the bottom;
  • the second, which is opposite, is attached through an adapter in the form of a bar, its thickness will be equal to the side thickness;
  • the fastening of the end board must be carried out through the transition beam, which must have a double thickness, that is, the trolley in the folded state will simply be flat;
  • so that the sides do not fall when they are in the working position, hooks or latches should be installed.

Safety

If we talk about safety in the manufacture of garden and construction carts, then we should talk about safety when working with tools - a hammer and a hacksaw. Also, special attention should be paid to safety when working with an angle grinder. In this case, you should remember the basic rules for working with this tool.

An ordinary do-it-yourself garden cart not only moves, but is also made - not only for reasons of saving on buying household goods in a store. There are many cases on earth that require regular or occasional transportation of goods, a purchased wheelbarrow can not cope with every type of ancillary rigging work.

Garden cart - an indispensable assistant in a country house

In gardening and farming, a garden cart, two-wheeled or four-wheeled, makes it easier to perform a variety of tasks. Removal of garbage and household waste, withered leaves and mowed grass, movement of building materials, firewood and coal - the range of use of small-scale wheeled vehicles is more than wide. When landscaping the territory with turf, when concreting the porch with your own hands, when laying out flower beds and greenhouses, arranging park paths, etc. an ordinary wheelbarrow increases the speed of work several times.

Of course, the easiest way is to buy a wheeled assistant in a store. Then you don’t have to think about how to make a garden cart reliable and voluminous with your own hands. But the choice of purchased wheelbarrows and carts is often limited to the only model that was developed during the construction of the White Sea-Baltic Canal - and since then they continue to be produced according to the well-known principle "The best is the enemy of the good". With self-production, the size and carrying capacity of the wheelbarrow is determined by the master himself, as well as its cross-country ability, because you can install wheels of various sizes.

In addition, in a populated country house or in a dacha with a personal plot, there is always a mass of conditionally ownerless materials - boards, bars, iron fittings and corners, etc. In this way, you can save on the purchase of original parts - a do-it-yourself garden wheelbarrow will be cheap in terms of costs, although it will require time and effort.

Garden wheelbarrow - do it yourself made of wood

A garden cart made of wood is the easiest to carry out, because. this process does not require the use of complex equipment such as welding machines or metal cut-off saws. The tree is processed with standard tools - but keep in mind that the durability, strength and load capacity of such a trolley will be noticeably inferior to the metal "sister".

Do-it-yourself garden wheelbarrow made of wood - step by step diagram

Step 1: the frame is the basis of reliability

The frame for a wooden cart is made of thick boards, in the form of a square or rectangle. The size of the bars for the frame is at least 70x70 mm, otherwise it will only be possible to carry hay and leaves on such a wheelbarrow. The frame of the beams is assembled "overlapped", screws are driven into the corners, it is possible to strengthen the frame structure with metal corners and additional ceilings. If there are antiseptic compounds on the farm, all the wood used is processed by them in advance - then our home-made wheelbarrow will resist rotting and dampness longer.

Step 2: Running

Rails for ball bearings are screwed to the bottom of the frame - one or two, depending on the number of wheels. It is better to make a wooden cart two-wheeled, providing supports for horizontal installation. If there is a ready-made axle on which you can put wheels from an old kart or moped, a bar with bearings is not needed.

A self-made wheelbarrow made of wood on one wheel will be unstable - high carpentry skills are required for such work.

Having fixed the wheels, the "skeleton" of the future trolley needs to be rolled around the site - it is better to fix the flaws in the wheel fasteners at an early stage. A wheelbarrow that is inconvenient to move will have to be used as an element of garden design or pushed deeper into the barn so that a reminder of the inefficient expenditure of time and effort does not spoil our mood with its appearance.

Step 3: making the handle

The handle of the trolley has a large load during movement. It is advisable to make it out of metal, even when the wheelbarrow itself is made of wood. As a metal handle, a steering wheel from an old scooter or just a long steel stick with a rubber crossbar is suitable. It is best to mount the handle articulated, with a latch. This design will allow the mounting unit to be reliable and fold during storage - which means that a garden wheelbarrow with an articulated handle will take up less space, and the handle itself will not break from someone's careless movement.

Step 4: hull

On a solid frame with reliable wheels, you can install free-form bumpers made of boards or plywood - you get a classic garden cart, assembled by yourself. Actually, the cargo container itself is quite feasible in a removable version - for example, in the form of an old plastic tub for transporting liquids or bulk cargo. Or a used trough, which is inserted into the spacer between the bars stuffed onto the frame. A wooden wheelbarrow is good because it provides fasteners for various containers for transporting goods, this is impossible with an iron cart.


Garden cart - do-it-yourself metal

But metal has other advantages - it does not rot or crack, withstand a lot of weight and last for decades - if high-quality metal is chosen, all parts fit well and are welded to each other. The garden cart is four-wheeled and large-sized, for carrying loads up to 100 kg and more, made only of metal - no tree can withstand such a load.

DIY metal garden cart - step by step diagram

Step 1: container first

Yes, yes, unlike the wooden counterpart, the metal cart is assembled from top to bottom. That is, the dimensions of a steel trough or other container determine the dimensions of the frame - but not vice versa. It is advisable to immediately check the tightness of our container, then it can be used to transport liquid or pasty goods without the risk of leakage to your own garden plot.

A good option would be to install pneumatic (that is, pumped up by a pump) wheels on our metal cart. Firstly, it will increase its carrying capacity to 60-80 kg. Secondly, the wheelbarrow on pneumatic wheels will significantly increase the permeability. Thirdly, you can control the wheel brakes on the handle - moving the trolley along inclined planes will become much easier, without the risk of tipping over or scattering the load.